1,1'-Ferrocenyldicarboxylic Acid as Starting Material for the Formation

Rico Packheiser , Petra Ecorchard , Tobias Rüffer , Manja Lohan , Björn Bräuer ... Jose A. M. Dinglasan, Michael Bailey, Jong B. Park, and Al-Amin ...
0 downloads 0 Views 97KB Size
Organometallics 1999, 18, 5725-5728

5725

1,1′-Ferrocenyldicarboxylic Acid as Starting Material for the Formation of Trimetallic Ti(IV)-Fe(II)-Cu(I) and Pentametallic Ti2(IV)-Fe(II)-Cu2(I) Complexes† W. Frosch, S. Back, and H. Lang* Technische Universita¨ t Chemnitz, Institut fu¨ r Chemie, Lehrstuhl Anorganische Chemie, Strasse der Nationen 62, D-09111 Chemnitz, Germany Received June 21, 1999 Summary: Reaction of {[Ti](CtCtBu)2}CuCH3 (1) {[Ti] ) (η5-C5H4SiMe3)2Ti} with 1,1′-(η5-C5H4CO2H)2Fe (2) results in the formation of either the heterotrinuclear complex {[Ti](CtCtBu)2}CuO2C(η5-C5H4)Fe(η5-C5H4CO2H) (3) or the pentametallic complex [{[Ti](CtCtBu)2}CuO2C(η5-C5H4)]2Fe (4), depending on the stoichiometric ratio of the reactants. Compound 4 can also be obtained by reacting 3 with 1 equiv of 1. When 3 is reacted with a stoichiometric quantity of {[Ti](CtCSiMe3)2}CuCH3 (5), the asymmetric complex {[Ti](CtCtBu)2}CuO2C(η5C5H4)Fe(η5-C5H4)CO2Cu{(Me3SiCtC)2[Ti]} (6) is produced. While in 4 two identical {[Ti](CtCtBu)2}Cu moieties are bridged by an [O2C(η5-C5H4)]2Fe entity, in 6 two different organometallic building blocks, such as {[Ti](CtCtBu)2}Cu and {[Ti](CtCSiMe3)2}Cu are linked by the same unit. The electrochemical behavior of complexes 3, 4, and 6 is discussed. Introduction Due to their potential use as new materials, transition metal (TM) complexes in which the corresponding metal centers are connected by π-conjugated organic systems, e.g., σ-bonded linear all-carbon chains Cn (n ) 1, 2, 3, ...), are of current interest since they may possess novel interesting electronic properties.1-3 The appropriate π-conjugated organic systems may allow, for example, electronic communication between the different metal centers in bi- or oligometallic compounds.4 Recently, we have reported the synthesis of several heterobimetallic complexes in which π-conjugated organic systems are used to connect early TM complex fragments to late TM metal centers.5,6 The electronic properties of these compounds, with respect to their potential use as molecular dipoles and/or model compounds for nanoconducting materials, have been reported. * To whom correspondence should be addressed. E-mail: [email protected]. †Dedicated to Prof. Dr. Dirk Walter on the occasion of his 60th birthday. (1) For example: (a) Astruc, D. Acc. Chem. Res. 1997, 30, 323. (b) Beck, W.; Niemer, B.; Wiesner, M. Angew. Chem., Int. Ed. Engl. 1993, 32, 923. (c) Lang, H. Angew. Chem., Int. Ed. Engl. 1994, 33, 1360. (d) Bunz, U. W. F. Angew. Chem., Int. Ed. Engl. 1996, 35, 968. (e) Lotz, S.; van Mooyen, P. H.; Meyer, R. Adv. Organomet. Chem. 1995, 37, 219. (f) Marder, S. R. In Metal-containing Polymers for Nonlinear Optics in Inorganic Materials; Bruce, D. W., O’Hare, D., Eds.; Wiley: Chichester, 1992. (g) Kanis, D. R.; Ratner, M. A.; Marks, J. J. Chem. Rev. 1994, 106, 569. (h) Chisholm, M. H. Angew. Chem., Int. Ed. Engl. 1991, 30, 673. (i) Bruce, M. I. Coord. Chem. Rev. 1991, 91, 197. (j) Werner, H. J. Organomet. Chem. 1994, 475, 45.

Since it is known that the ferrocenyl moiety can act as a transmitter unit for electronic information,7 we here discuss the synthesis and electrochemical behavior of heterometallic complexes in which titanium-copper moieties are linked by an [O2C(η5-C5H4)]2Fe entity. (2) (a) Sonogashira, K.; Fujikura, V.; Yatake, T.; Toyoshima, M.; Takahashi, S.; Hagihara, N. J. Organomet. Chem. 1978, 145, 101. (b) Nast, R.; Scheller, P.; Hengefeld, A. J. Organomet. Chem. 1981, 214, 273. (c) LaPointe, R. E.; Wolczanski, P. T.; Mitchell, J. F. J. Am. Chem. Soc. 1986, 108, 6382. (d) Cross, R. J.; Davidson, M. F. J. Chem. Soc., Dalton Trans. 1986, 411. (e) Neithamer, D. R.; LaPointe, R. E.; Wheeler, R. A.; Richeson, D. S.; van Duyne, G. D.; Wolczanski, P. T.; Mitchell, J. F. J. Am. Chem. Soc. 1989, 111, 9056. (f) Koutsatonis, G.; Selegue, J. P. J. Am. Chem. Soc. 1991, 113, 2316. (g) Davies, J. A.; El-Ghanam, M.; Pinkerton, A. A.; Smith, D. A. J. Organomet. Chem. 1991, 409, 367. (h) Clair, M. S.; Schaefer, W. P.; Bercaw, J. E. Organometallics 1991, 10, 525. (i) Binger, P.; Mu¨ller, P.; Phillips, P.; Gabor, B.; Mynott, R.; Hermann, A. T.; Langhauser, F.; Kru¨ger, C. Chem. Ber. 1992, 125, 2209. (j) Su¨nkel, K.; Birk, U.; Robl, C. Organometallics 1994, 13, 1679. (k) Yam, V. W. W.; Lau, V. C. Y.; Cheung, K. K. Organometallics 1996, 15, 1740. (l) Falloon, S. B.; Weng, W.; Arif, A. M.; Gladysz, J. A. Organometallics 1997, 16, 2008. (m) Kay, K. Y.; Baeck, Y. G. Chem. Ber. 1997, 130, 581. (n) Steenwinkel, P.; James, S. L.; Grove, D. M.; Koojman, H.; Spek, A. L.; van Koten, G. Organometallics 1997, 16, 513. (o) Woodworth, B. E.; Templeton, J. L. J. Am. Chem. Soc. 1997, 119, 828. (p) Brady, M.; Weng, W.; Zhou, Y.; Seyler, J. W.; Amoroso, A. J.; Arif, A. M.; Bo¨hme, M.; Frenking, G.; Gladysz, J. A. J. Am. Chem. Soc. 1997, 119, 775. (3) (a) Davies, S. J.; Johnson, B. F. G.; Lewis, J.; Khan, M. S. J. Organomet. Chem. 1991, 401, C43. (b) Weidmann, T.; Weinrich, V.; Wagner, B.; Robl, C.; Beck, W. Chem. Ber. 1991, 124, 1363. (c) Lembke, F. R.; Szalda, D. J.; Bullock, R. M. J. Am. Chem. Soc. 1991, 113, 8466. (d) Ramsden, J. A.; Weng, W.; Arif, A. M.; Gladysz, J. A. J. Am. Chem. Soc. 1992, 114, 5890. (e) Ogawa, H.; Onitsuka, K.; Joh, T.; Takahashi, S.; Yamamoto, Y. Bull. Chem. Soc. Jpn. 1992, 65, 1179. (f) Weigand, W.; Robl, C. Chem. Ber. 1993, 126, 1807. (g) Colbert, M. C. B.; Edwards, A. J.; Lewis, J.; Long, N. J.; Page, N. A.; Parker, D. G.; Raithby, P. R. J. Chem. Soc., Dalton Trans. 1994, 2589. (h) Russo, M. V.; Furlani, A.; Licoccia, S.; Paolesse, R.; Chiesi-Villa, A.; Guastini, C. J. Organomet. Chem. 1994, 469, 245. (i) Le Narvor, N.; Lapinte, C. Organometallics 1995, 14, 634. (j) Sato, M.; Mogi, E.; Katada, M. Organometallics 1995, 14, 837. (k) Houbrechts, S.; Clays, K.; Persoons, K.; Cadierno, V.; Gamasa, M. P.; Gimeno, J. Organometallics 1996, 15, 5266. (l) Hartbaum, C.; Roth, G.; Fischer, H. Chem. Ber. 1997, 130, 479. (m) Colbert, M. C. B.; Lewis, J.; Long, N. J.; Raithby, P. R.; White, A. J. P.; Williams, D. J. J. Chem. Soc., Dalton Trans. 1997, 99. (n) Jones, N. D.; Wolf, M. O.; Giaquinta, D. M. Organometallics 1997, 16, 1352. (4) (a) Belanzoni, P.; Re, N.; Sgamelotti, A.; Floriani, C. J. Chem. Soc., Dalton Trans. 1998, 1825. (b) Re, N.; Sgamelotti, A.; Floriani, C. J. Chem. Soc., Dalton Trans. 1998, 2521. (c) Kanis, D. R.; Lacroix, P. G.; Ratner, M. A.; Marks, T. J. J. Am. Chem. Soc. 1994, 116, 2521. (d) Sponsler, M. B. Organometallics 1995, 14, 1920. (e) Coat, F.; Guillement, M.; Paul, F.; Lapinte, C. J. Organomet. Chem. 1999, 578, 76. (f) Gu, X.; Sponsler, M. B. Organometallics 1998, 17, 5920. (g) Akita, M.; Chung, M. C.; Sakurai, A.; Sugimoto, S.; Terada, M.; Tanaka, M.; Morooka, Y. Organometallics 1997, 16, 4882. (h) Lavastre, O.; Bachmann, P.; Guesmi, S.; Moinet, C.; Dixneuf, P. H. Organometallics 1997, 16, 184. (i) Schimanke, H.; Gleiter, R. Organometallics 1998, 17, 275. (j) Bildstein, B.; Schweiger, M.; Kopacka, H.; Ongania, K. H.; Wurst, K. Organometallics 1998, 17, 2414. (5) (a) Back, S.; Pritzkow, H.; Lang, H. Organometallics 1998, 17, 41. (b) Back, S.; Zsolnai, L.; Huttner, G.; Lang, H. J. Organomet. Chem. 1998, 663, 73. (c) Back, S.; Gossage, R. A.; Rheinwald, G.; del Rio, I.; Lang, H.; van Koten, G. J. Organomet. Chem. 1999, 582, 126.

10.1021/om990476v CCC: $18.00 © 1999 American Chemical Society Publication on Web 11/30/1999

5726

Organometallics, Vol. 18, No. 26, 1999

Notes

Scheme 1. Synthesis of 3 and 4 by the Reaction of 1 with 2

Results and Discussion The monomeric bis(η2-alkyne)-stabilized copper(I)methyl complex {[Ti](CtCtBu)2}CuMe (1)8 {[Ti] ) (η5C5H4SiMe3)2Ti} reacts at -70 °C with 1 equiv of (η5C5H4CO2H)2Fe (2) with loss of methane, producing orange-colored {[Ti](CtCtBu)2}CuO2C(η5-C5H4)Fe(η5C5H4CO2H) (3) in quantitative yield (Scheme 1). However, when 2 equiv of 1 are reacted with 2 at -20 °C the pentametallic ferrocenyl-bridged complex [{[Ti](Ct CtBu)2}CuO2C(η5-C5H4)]2Fe (4) is formed (Scheme 1). The latter molecule can also be obtained when 3 is reacted with 1 in a 1:1 ratio under similar reaction conditions (Scheme 1). In compound 4, the ferrocenyldicarboxylate ligand bridges two identical titanium-copper moieties. It is also possible for this ligand to bridge two different titanium-copper complex fragments. This is shown by the reaction of 3 with {[Ti](CtCSiMe3)2}CuCH3 (5) at low temperature, which results in the formation of the asymmetric pentametallic complex{[Ti](CtCtBu)2}CuO2C(η5-C5H4)Fe(η5-C5H4)CO2Cu{(Me3SiCtC)2[Ti]} (6) in high yield (Scheme 2). The yield is lowered somewhat at higher temperatures (81% at 0-25 °C, compared to 93% at -20 °C), due to concurrent decomposition of 5 to form the tetrametallic titanium-copper acetylide {[Ti](CtCSiMe3)(CtCCu)}2 (7), which has been previously characterized.9,10 Complexes 3, 4, and 6 can be isolated as orangecolored solids. In contrast to complexes 1 and 5, which (6) For related species see: (a) Hayashi, Y.; Osawa, M.; Kobayashi, K.; Wakatsuki, J. J. Chem. Soc., Chem. Commun. 1996, 1617. (b) Hayashi, Y.; Osawa, M.; Wakatsuki, J. J. Organomet. Chem. 1997, 542, 241. (7) (a) We, B. J.; Jones, C. J.; McCleverty, J. A.; Bloor, D.; Cross, G. J. Organomet. Chem. 1994, 464, 225. (b) Mulkens, R.; Gates, D. P.; Balaiskis, D.; Pudelski, J. K.; McIntosh, D. F.; Cough, A. J.; Manners, I. J. Am. Chem. Soc. 1997, 119, 10976. (c) Fabrizide Briani, F.; Gmeinwieser, T.; Heerdtweek, E.; Ja¨kle, F.; Caschi, F.; Wagner, M.; Zanello, P. Organometallics 1997, 16, 4776. (d) Manners, I. Adv. Mater. 1994, 6, 68. (8) (a) Janssen, M. D.; Ko¨hler, K.; Herres, M.; Dedieu, A.; Smeets, W. J. J.; Spek, A. L.; Grove, D. M.; Lang, H.; van Koten, G. J. Am. Chem. Soc. 1996, 118, 4817. (b) Lang, H.; Ko¨hler, K.; Zsolnai, L.; Bu¨chner, M.; Driess, A.; Huttner, G.; Stra¨hle, J. Organometallics 1997, 16, 4776. (9) Janssen, M. D.; Herres, M.; Zsolnai, L.; Grove, D. M.; Lang, H.; van Koten, G. Organometallics 1995, 14, 1018. (10) (a) Lang, H.; Weinmann, M. Synlett 1996, 1. (b) Lang, H.; Rheinwald, G. J. Prakt. Chem. 1999, 341, 1.

Scheme 2. Synthesis of 6 by the Reaction of 3 with 5

slowly decompose even at low temperature,8 the ferrocenyldicarboxylate species are stable at low temperature for extended periods in solution and in the solid state. As solids, they can be handled briefly in air, but decompose slowly in solution upon exposure to air. While 1 and 5 are readily soluble in most common organic solvents, complexes 3, 4, and 6 only dissolve in polar organic ones, such as tetrahydrofuran, dichloromethane, or dimethyl sulfoxide. Complexes 3, 4, and 6 can be precipitated as orange solids by cooling their tetrahydrofuran/n-pentane solutions to -30 °C. Complexes 3, 4, and 6 were characterized by elemental analysis as well as IR, 1H NMR, and 13C{1H} NMR spectroscopy. The progress of all reported reactions can easily be monitored by IR and NMR studies. The IR spectra of 3 and 4 exhibit only one CtC stretching vibration at 1989 and 1990 cm-1, respectively. Since two different titanocene-copper tweezer moieties are present in 6, two distinct νCtC absorptions at 1989 and 1918 cm-1 are observed, of which the first one can be assigned to the corresponding [Ti](CtCtBu)2 building block and the

Notes

Organometallics, Vol. 18, No. 26, 1999 5727 Table 1. Cyclic Voltammetric Dataa of Compounds 2-4 and 6 reduction E1/2 [V] (∆E [mV])

compound 2 3 4 6

oxidation E1/2 [V] (∆E [mV])

Ti-containing unit

TiIV/TiIII

CuI/Cu0

CuI/CuII

FeII/FeIII

[Ti](CtCtBu)2 [Ti](CtCtBu)2 [Ti](CtCtBu)2 [Ti](CtCSiMe3)2

-2.01 (100) -2.00 (120) -1.99 (110) -2.17 (120)

-1.79 (irr.) -1.84 (irr.) -1.81 (irr.)

0.11 (70) 0.09 (80) 0.11 (60)

0.46 (75) 0.40 (70) 0.39 (90) 0.41 (60)

a The cyclic voltammograms have been recorded in tetrahydrofuran solutions in the presence of [nBu N][PF ] (c ) 0.1 mol dm-3) at 25 4 6 °C under N2; scan-rate 100 mV s-1; potentials are referenced to the FcH/FcH+ couple (E1/2 ) 0.00 V).

second one to the [Ti](CtCSiMe3)2 entity. A characteristic feature in the IR spectra of 3, 4, and 6 is the shift of the corresponding νCtC vibrations to higher frequencies upon replacement of a methyl ligand with a carboxylate [cf. νCtC: 1909 cm-1 (1), 1867 cm-1 (5)].8 This observation is consistent with the IR stretching frequencies previously reported for copper-carboxylate complexes of this sort.11 This strongly suggests that a change from the η1-bonded methyl ligand in 1 or 5 to a carboxylic unit in 3, 4, or 6 leads to a stronger carboncarbon triple bond. Furthermore, this result demonstrates that the carboxylic entity is a weaker σ-donor ligand than the respective methyl group. In addition, IR spectra clearly show that the carboxylate ligands are only η1-bonded to the copper(I) center through one oxygen atom: The difference of the symmetric (ca. 1700 cm-1) and antisymmetric νCO-stretching vibration (at around 1560 cm-1) is around 140 cm-1, which is typical for this type of bonding.11b This result is consistent with, for example, monomeric alkyne-stabilized copper(I)acetate or -benzoate species, which were additionally characterized by X-ray diffraction analysis.10,11 The 1H and 13C{1H} NMR spectra of 3, 4, and 6 consist of well-resolved resonance signals for each of the organic building blocks present. The resonance signals of the titanium-bound cyclopentadienyl protons appear as broad signals at 6.07 ppm in 3, 6.01 and 6.04 ppm in 4, and 6.03 ppm in 6. These signals are significantly downfield of the signals for the starting materials 1 and 5 (5.13 and 5.67 ppm for 1; 5.38 and 5.68 ppm for 5) and are similar to values found for previously reported carboxylate compounds of this sort.8,10 Additionally, the cyclopentadienyl protons of the ferrocenyl units appear as broadened signals at approximately 4.4 and 4.8 ppm. While in 4 and 6 the sum of the integrals for the protons of the titanocene and the ferrocenyl unit is 2:1, for complex 3 the expected 1:1 ratio is observed. The most diagnostic signals in the 13C{1H} NMR spectra are those of the bridging alkynyl ligands. The CR carbon atoms of the alkynyl groups give rise to signals that are shifted to higher field with respect to the starting materials; the signals for the tBu-acetylide CR nuclei of 3, 4, and 6 appear at 147.7 and 147.8 ppm (compared to 169.1 ppm in 1), while that of the trimethylsilyl acetylide ligand appears at 180.4 ppm (compared to 203.6 in 5). In contrast, the resonance signals of the Cβ atoms are shifted to lower field in compounds 3, 4, and 6 [3, 134.7 ppm; 4, 135.2 ppm; 6, 135.2 (TiCtCtBu), 143.1 ppm (TiCtCSiMe3)], when (11) (a) Lang, H.; Frosch, W. In Selective Reactions of MetalActivated Molecules; Werner, H., Schreier, P., Eds.; Vieweg, 1998; pp 177-180. (b) Lang, H.; Ko¨hler, K.; Zsolnai, L. Chem. Ber. 1995, 128, 519, and references therein.

compared with 1 (123.4 ppm) or 5 (138.6 ppm).8,10 The resonance signals of the carbon atoms of the corresponding carboxylic units are found at 175.4 (3), 175.8 (4), and 175.6 ppm (6). Unfortunately, the carbon resonance signal for the noncoordinated CO2H moiety in 3 could not be unequivocally detected. The resonance signals of the titanocene cyclopentadienyl carbon atoms are found in the normal range of 115-125 ppm, and the corresponding signals of the ferrocenyl carbon atoms are found at higher field between 65 and 80 ppm, which is typical for ferrocenyl complexes.5 Also significant in the 13C{1H} NMR spectra of 3, 4, and 6 is the disappearance of the resonace signal of the copper σ-bonded methyl group, found at -7.4 ppm in 1 or -9.2 ppm in 5, respectively.8,10 In molecules 3, 4, and 6, a ferrocenyl unit is connected to the copper(I) center of a heterobimetallic titaniumcopper moiety via a carboxylic unit. Because of this, the electrochemical behavior of these complexes is of interest, since three different metal centers, Ti(IV), Fe(II), and Cu(I), are connected via π-conjugated organic units. Therefore, these complexes have been subjected to cyclovoltammetric measurements. The electrochemical data obtained for 2, 3, 4, and 6 are listed in Table 1. For 1,1′-(η5-C5H4CO2H)2Fe (2), a reversible oneelectron oxidation has been observed at E1/2 ) 0.46 V with ∆E ) 75 mV (Table 1). In comparison to the reference couple FcH/FcH+ this indicates that the oxidative process has been made more difficult by the two electron-withdrawing carboxylate substituents. Similar influences of electron-withdrawing12a or electrondonating12b substituents on the FeII/FeIII redox process in ferrocenyl species have been reported. In comparison to 2, the respective redox responses of the Cu(I)-bound ferrocenyl carboxylates are shifted slightly to a more positive potential. This indicates that the electronwithdrawing properties of the carboxylate functionalities have been somewhat decreased by replacement of the carboxylic acid hydrogen atom with a copper center (Table 1). At around 0.1 V a redox process is found, which can be interpreted as the one-electron reversible CuI/CuII oxidation (Table 1). This interpretation is corroborated by findings reported recently for similar copper(I)-containing titanium tweezer molecules.13 While the CuI/CuII redox couple is reversible under the conditions applied (vide supra), the CuI/Cu0 reduction shows a differing behavior: For complexes 3, 4, and 6 irreversible reductions are found at -1.79, -1.84, and -1.81 (12) For example see: (a) Beckham, T. J.; Cough, A. J.; Manners, I. Organometallics 1999, 18, 1030. (b) Mata, J.; Uriel, S.; Peris, E.; Clusar, R.; Houbrechts, S.; Persoons, A. J. Organomet. Chem. 1998, 562, 197. (13) Frosch, W.; Stein, T.; Back, S.; Lang, H. Inorg. Chim. Acta, to be submitted.

5728

Organometallics, Vol. 18, No. 26, 1999

V, respectively (Table 1). However, the TiIV/TiIII reduction is found to be reversible (Table 1). Thus, for the [Ti](CtCtBu)2 fragments, a reversible wave at around -2.0 V is observed, while the Ti(IV) center of the [Ti](CtCSiMe3)2 unit is reduced reversibly at a more negative potential (E1/2 ) -2.17 V, ∆E ) 120 mV). This directly indicates that the reduction of the titanium(IV) center in the latter building block becomes more difficult, due to an increased electron density on the titanium core.5 The fact that only one pair of redox processes is observed for the copper(I) centers of the dicopper complexes 4 and 6 indicates that electronic communication between the corresponding metal centers is not favored. Moreover, it seems that in this case the carboxylate units of the ferrocenyl connectivity act as an impedance rather than as a transmitter. Experimental Section General Methods. All reactions were carried out in an atmosphere of nitrogen using standard Schlenk techniques. Solvents were purified by distillation over appropriate drying agents: n-pentane and dichloromethane, calcium hydride; diethyl ether and tetrahydrofuran, sodium/benzophenone ketyl; toluene, sodium. FT-IR spectra were obtained on a PerkinElmer FT-IR 1000 spectrometer (KBr pellets, as film between NaCl plates, or as solutions between CaF2 plates). NMR spectra were recorded on a Bruker Avance 250 spectrometer, operating in the Fourier transform mode. 1H NMR spectra were recorded at 250.130 MHz (internal standard relative to CDCl3, δ ) 7.27); 13C{1H} NMR spectra were recorded at 67.890 MHz (standard intern, relative to CDCl3, δ ) 77.0). Chemical shifts are reported in δ units (ppm) downfield from SiMe4 with the solvent as reference signal. Melting points were determined using analytically pure samples, sealed off in nitrogen purged capillaries on a Gallenkamp MFB 595 010 M melting point apparatus. Microanalyses were performed by the Organic Department at the Technical University of Chemnitz. Electrochemical measurements were performed by cyclic voltammetry in a solution of [N(nBu)4]PF6 (0.1 mol/dm3) in tetrahydrofuran at 25 °C, using a standard three-electrode cell (Pt, Pt, SCE) on a Radiometer DEA 101 digital electrochemical analyzer. All potentials were referred to the ferroceneferrocenium couple [FcH/FcH+: E ) 0.00 mV] as internal standard; ∆E ) Epa - Epc. General Remarks. Compounds 1 and 5 were prepared by published procedures.8 All other chemicals were purchased by commercial suppliers and were used as received. Synthesis of {[Ti](CtCtBu)2}CuO2C(η5-C5H4)Fe(η5-C5H4CO2H) (3). (η5-C5H4CO2H)2Fe (2) (90 mg, 0.320 mmol) was added in one portion to a solution of {[Ti](CtCtBu)2}CuCH3 (1) (180 mg, 0.320 mmol) in 50 mL of tetrahydrofuran at -70 °C. After stirring for 30 min at this temperature, the reaction mixture was slowly warmed to 25 °C and stirred additionally for 1 h. All volatile materials were removed in vacuo. The orange residue was washed with cold n-pentane (3 × 10 mL). {[Ti](CtCtBu)2}CuO2C(η5-C5H4)Fe(η5-C5H4CO2H) (3) was obtained in quantitative yields. Mp: 107 °C (dec). IR (NaCl, ν, cm-1): 1989 (CtC), 1698 (CO, sym), 1558 (CO, as). 1H NMR (CDCl3): 0.27 (s, 18H, SiMe3), 1.33 (s, 18H, tBu), 4.35 (bs, 4H, C5H4Fe), 4.70 (bs, 4H, C5H4Fe), 6.07 (bs, 8H, C5H4Ti). 13C{1H} NMR (CDCl3): 0.1 (SiMe3), 31.1 (tBu), 31.8 (tBu, Cq), 71.7 (m, C5H4Fe), 77.2 (C5H4Fe, Cipso; the other Cipso signal is covered by the CDCl3 resonance), 114.0 (C5H4Ti), 116.7 (C5H4Ti), 119.8 (C5H4Ti,

Notes Cipso), 134.7 (TiCtCtBu), 147.7 (TiCtCtBu), 175.4 (CO2), the signal of the CO2H group could not be unequivocally detected. Anal. Calcd for C40H53CuFeO4Si2Ti (821.30): C, 58.50; H, 6.50. Found: C, 58.12; H, 6.33. Synthesis of [{[Ti](CtCtBu)2}CuO2C(η5-C5H4)]2Fe (4). Method A: [Ti](CtCtBu)2}CuCH3 (1) (90 mg, 0.164 mmol) in 20 mL of tetrahydrofuran was added dropwise to a tetrahydrofuran (30 mL) solution containing {[Ti](CtCtBu)2}CuO2C(η5-C5H4)Fe(η5-C5H4CO2H) (3) (135 mg, 0.164 mmol) at -20 °C. After stirring for 30 min at this temperature, the reaction mixture was warmed to 25 °C and stirred for 1 h. All volatiles were removed in vacuo. The orange-colored residue was washed with cold n-pentane (2 × 5 mL) to afford [{[Ti](Ct CtBu)2}CuO2C(η5-C5H4)]2Fe (4) in quantitative yields. Method B: (η5-C5H4CO2H)2Fe (2) (40 mg, 0.15 mmol) was added in one portion to {[Ti](CtCtBu)2}CuCH3 (1) (170 mg, 0.30 mmol) in 30 mL of tetrahydrofuran at -20 °C. After stirring for 1 h at this temperature, the reaction mixture was warmed to 25 °C and stirred for another 30 min. Then, all volatile materials were removed in vacuo. The orange-colored residue was washed twice with cold n-pentane (5 mL). [{[Ti](CtCtBu)2}CuO2C(η5-C5H4)]2Fe (4) was obtained quantitatively. Mp: 151 °C (dec). IR (NaCl, ν, cm-1): 1990 (CtC), 1699 (CO, sym), 1558 (CO, as). 1H NMR (CDCl3): 0.28 (s, 36H, SiMe3), 1.32 (s, 36H, tBu), 4.37 (bs, 4H, C5H4Fe), 4.76 (bs, 4H, C5H4Fe), 6.01 (bs, 8H, C5H4Ti), 6.04 (bs, 8H, C5H4Ti). 13C{1H} NMR (CDCl3): 0.1 (SiMe3), 31.1 (tBu), 31.4 (tBu, Cq), 70.5 (C5H4Fe), 70.8 (C5H4Fe), 80.4 (C5H4Fe, Cipso), 113.9 (C5H4Ti), 116.6 (C5H4Ti), 119.4 (C5H4Ti, Cipso), 135.2 (TiCtCtBu), 147.7 (TiCtCtBu), 175.8 (CO2). Anal. Calcd for C68H96Cu2FeO4Si4Ti2 (1368.54): C, 59.68; H, 7.07. Found: C, 60.03; H, 7.13. Synthesis of {[Ti](CtCtBu)2}CuO2C(η5-C5H4)Fe(η5-C5H4)CO2Cu{2(Me3SiCtC)[Ti]} (6). [Ti](CtCSiMe3)2}CuCH3 (5) (100 mg, 0.165 mmol) was dissolved in 30 mL of tetrahydrofuran and added dropwise to {[Ti](CtCtBu)2}CuO2C(η5-C5H4)Fe(η5-C5H4CO2H) (3) (135 mg, 0.165 mmol) in 50 mL of tetrahydrofuran at -20 °C. After stirring for 30 min at this temperature, the reaction mixture was allowed to warm to 25 °C. After 1 h, all volatiles were removed in vacuo. The orangecolored residue was washed twice with cold n-pentane (10 mL), and the remaining solid was crystallized from diethyl ether at -30 °C to produce {[Ti](CtCtBu)2}CuO2C(η5-C5H4)Fe(η5C5H4)CO2Cu{(Me3SiCtC)2[Ti]} (6) (220 mg, 93% yield based on 3). Mp: 144 °C (dec). IR (NaCl, ν, cm-1): 1989 (CtCtBu), 1918 (CtCSiMe3), 1698 (CO, sym), 1585 (CO, as). 1H NMR (CDCl3): 0.26 (m, 54H, SiMe3), 1.32 (s, 18H, tBu), 4.33 (bs, 4H, C5H4Fe), 4.74 (bs, 4H, C5H4Fe), 6.03 (m, 16H, C5H4Ti). 13C{1H} NMR (CDCl ): 0.1 (SiMe ), 0.3 (SiMe ), 0.5 (SiMe ), 3 3 3 3 30.7 (tBu), 31.0 (tBu, Cq), 70.4 (bs, C5H4Fe), 70.7 (bs, C5H4Fe), 80.1 (bs, C5H4Fe, Cipso), 113.8 (C5H4Ti), 114.2 (C5H4Ti), 116.6 (C5H4Ti), 117.8 (C5H4Ti), 119.3 (C5H4Ti, Cipso), 121.5 (C5H4Ti, Cipso), 135.2 (TiCtCtBu), 143.1 (TiCtCSiMe3), 147.8 (TiCt CtBu), 175.6 (CO2), 180.4 (TiCtCSiMe3). Anal. Calcd for C66H96Cu2FeO4Si6Ti2 (1400.69): C, 56.60; H, 6.91. Found: C, 56.24; H, 6.76.

Acknowledgment. We are grateful to the Volkswagenstiftung, the Fonds der Chemischen Industrie, and the Konrad-Adenauer-Stiftung (W.F.) for financial support. We thank Mrs. J. Ruder and Mrs. S. Ahrens for their assistance in the preparation of the manuscript and Dr. Darren George for many fruitful discussions. OM990476V