12C ... - ACS Publications

Mackay, A. W. East African lake evidence for Pliocene millennial-scale climate variability. 398. Geology 2014, 42, 955–958, DOI: 10.1130/G35915.1. 3...
0 downloads 0 Views 544KB Size
Subscriber access provided by IDAHO STATE UNIV

Article

Spatial micro-analysis of natural 13C/12C abundance in environmental samples using laser-ablation isotope-ratio-mass spectrometry Andrei Rodionov, Eva Lehndorff, Ciprian C. Stremtan, Willi A Brand, Heinz-Peter Königshoven, and Wulf Amelung Anal. Chem., Just Accepted Manuscript • DOI: 10.1021/acs.analchem.9b00892 • Publication Date (Web): 01 Apr 2019 Downloaded from http://pubs.acs.org on April 3, 2019

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Analytical Chemistry

1

Spatial micro-analysis of natural 13C/12C abundance in environmental

2

samples using laser-ablation isotope-ratio-mass spectrometry

3

Andrei Rodionov1,2*, Eva Lehndorff1,2#, Ciprian C. Stremtan3, Willi A. Brand4, Heinz-

4

Peter Königshoven5, Wulf Amelung1

5 6

1 Institute

7

Ecology, University of Bonn, Nussallee 13, 53115 Bonn, Germany

8

2 Present

9

Bayreuth, Germany

of Crop Science and Resource Conservation (INRES), Soil Science and Soil

address: Soil Ecology, University of Bayreuth, Dr.-Hans-Frisch-Str. 1-3, 95448

10

3 Teledyne

11

4 Max-Planck-Institute

12

Jena, Germany

13

5 Feinmechanische

14

Bonn, Wegeler Str. 12, 53115 Bonn, Germany

CETAC Technologies, 14306 Industrial Rd. Omaha, Nebraska 68144 USA for Biogeochemistry, Beutenberg Campus, P.O. Box 100164, 07701

Werkstatt, Institute of Physical and Theoretical Chemistry, University of

15 16 17 18

* Corresponding author ([email protected]) #shared first authorship

1 ACS Paragon Plus Environment

Analytical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 30

19

Abstract

20

The stable 13C/12C isotope composition usually varies among different organic materials due to

21

isotope fractionation during biochemical synthesis and degradation processes. Here we

22

introduce a novel laser-ablation stable isotope-mass-spectrometry methodology (LA-IRMS)

23

that allows highly resolved spatial analysis of carbon isotope signatures in solid samples down

24

to a spatial resolution of 10 µm. The presented instrumental setup includes in-house-designed

25

exchangeable ablation cells (3.8 and 0.4 mL, respectively) and an improved sample gas transfer,

26

which allow accurate δ13C measurements of an acryl plate standard down to 0.6 and 0.4 ng of

27

ablated carbon, respectively (standard deviation 0.25‰). Initial testing on plant and soil

28

samples confirmed that microheterogeneity of their natural

29

mapped at a spatial resolution down to 10 µm. The respective δ13C values in soils with C3/C4

30

crop sequence history varied by up to 14‰ across a distance of less than 100 µm in soil

31

aggregates, while being partly sorted along rhizosphere gradients of < 300 µm from Miscanthus

32

plant roots into the surrounding soil. These very first demonstrations point to the appearance of

33

very small metabolic hotspots originating from different natural isotope discrimination

34

processes, now traceable via LA-IRMS.

2 ACS Paragon Plus Environment

13C/12C

abundance can now be

Page 3 of 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Analytical Chemistry

35

Introduction

36

The stable 13C/12C isotope composition of environmental samples has become a unique tracer

37

of carbon assimilation pathways. In plants, its analysis provided key information about the

38

assimilation of fossil carbon sources (Suess effect) 1, about differentiated C3 and C4

39

photosynthetic pathways 2,3, and gave hints regarding water stress adaptation pathways 4–6. In

40

marine and lacustrine environments, the analysis helped to track terrestrial C input and was

41

useful for paleoclimate reconstruction 7–9. In terrestrial environments, δ13C analyses were

42

indispensable for assessing the mean residence time of soil carbon after C3/C4 vegetation

43

changes10,11, for elucidating microbial and faunal food-webs12, and for paleo-environmental

44

reconstructions13–16. However, spatially homogeneous C isotope signals were assumed for all

45

these studies because it has not been possible to map microscale variation of the 13C/12C isotope

46

composition in routine lab analyses down to the natural abundance level. The present

47

contribution provides a viable solution to this problem.

48

Different instrumental setups using laser ablation (LA) combined with other detectors have

49

already been applied on a micrometer scale for measuring bacterial cells and plant and animal

50

tissue, as well as to other substances in geological and biological studies17–23. For ablation of

51

organic matter, cold Nd:YAG laser ablation systems are recommended24,25. Lasers operating at

52

213 nm ensure cold ablation as more traditional 266 nm systems24,25 and thus avoid isotope

53

fractionation effects during the ablation process. All previous laser ablation studies relied on

54

obtaining spatially resolved signatures from organic solids with relatively large and

55

homogeneous organic C contents compared to soil (wood, single hair samples, or pollen grains

56

of C3 and C4 plants), yielding ablation spot sizes between 150 and 50 µm22,24,25 and a sensitivity

57

between 65 and 24 ng C25,26. Higher spatial resolution and sensitivity are crucial for many

58

environmental studies, which have aims such as identifying microbial hotspots in soils and

59

sediments, or patchy sequestration of carbon.









3 ACS Paragon Plus Environment

Analytical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

60

In this contribution we introduce a LA-IRMS system using frequency quintupled 213 nm Q-

61

switched Nd:YAG laser with 4 mJ pulse-1;

62

Teledyne CETAC Technologies, Omaha, USA). Laser ablation of particulate matter was done

63

in newly designed low-volume cells, the ablated particles were collected and transported using

64

helium as the carrier gas. Particles were oxidized to CO2 in an oven, then sample gas was

65

transferred to a system of two cryo-traps for gas clean-up and peak focus (modified PreCon

66

system, see27). Sample gas was then led through a GC-column before it entered the IRMS

67

DeltaVplus via a ConFloIV interface (both from ThermoFisher Scientific) for analysis of 13C.

68

The challenges were to increase the spatial resolution of the 13C signal by an order of

69

magnitude by decreasing the area of ablated spots down to 10 µm, thus responding to a growing

70

interest to isotopical characterization of microbial hot spots, organic exudates of roots and

71

residues of plants and microbes. Doing so would enable us to reach into areas where the

72

utilization of organic materials is physically hindered by, e.g., encrustation processes and

73

occlusion within aggregates, and thus limited bioaccessibility.

74

Experimental approach

75

Ablation system and isotope measurement

76

For laser ablation, highly focused laser light pulses are used to remove (ablate) material at a

77

spatial resolution of a few micrometers in diameter from discrete areas of virtually any solid

78

sample (e.g.,28 and references therein). For the present study, we used a Teledyne LSX-213G2+

79

solid state Nd:YAG laser system (CETAC, Omaha, NE, USA) that produces deep UV laser

80

radiation at a wavelength of 213 nm. The laser pulse frequency can be variably adjusted;

81

frequencies from 10 to 20 Hz proved to be optimal for this application. Furthermore, the laser

82

allowed adjustment of the energy output, the ablated spot size and the number of laser shots.

83

The standard cell of the LSX213 G2+ laser (two volume active cell HelEx II was replaced with

84

an in-house-designed single-volume cell (see Figure 1 − the cell was constructed with an active 4 ACS Paragon Plus Environment

Page 4 of 30

Page 5 of 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Analytical Chemistry

85

volume of 3.8 cm3 and a total internal volume of 17.2 cm3; for details see Figure S-1 in

86

supplementary material). The cell was mounted on an adapted plane mount aligned to the laser’s

87

original movable stages, which allowed the sample to be monitored by computer-controlled

88

video microscope and internal LED illumination (coaxial, ring, and transmitted light sources).

89

As we expected the samples to have very low amounts of C, we also produced a second cell

90

with the same design, but with an even smaller active volume of 0.4 cm3 and, therefore, with

91

reduced background signal. Both cells are easy to handle and are interchangeable.

92

The upper and lower windows of the single-volume cell were made of quartz glass and sealed

93

using O-rings (Ø30x2mm; form error: 3/0.5 wedge: