2D-CoSEC

Subscriber access provided by READING UNIV

Article

Using two-dimensional correlation size exclusion chromatography (2D-CoSEC) and EEM-PARAFAC to explore the heterogeneous adsorption behavior of humic substances on nanoparticles with respect to molecular sizes Diep Dinh Phong, and Jin Hur Environ. Sci. Technol., Just Accepted Manuscript • DOI: 10.1021/acs.est.7b04311 • Publication Date (Web): 21 Dec 2017 Downloaded from http://pubs.acs.org on December 21, 2017

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

Environmental Science & Technology is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 30

Environmental Science & Technology

1 2 3 4

Using two-dimensional correlation size exclusion chromatography (2D-

5

CoSEC) and EEM-PARAFAC to explore the heterogeneous adsorption

6

behavior of humic substances on nanoparticles with respect to molecular

7

sizes

8

Diep Dinh Phong a,b and Jin Hura,*

9 10 11 12

a

13

gu, Seoul, 05006, South Korea

14

b

15

Hanoi, 100000, Vietnam

Department of Environment and Energy, Sejong University, 209 Neungdong-ro, Gwangjin-

Vietnam Academy of Science and Technology, 18 Hoang Quoc Viet Street, Cau Giay City,

16 17 18

Revised and Re-submitted to Environmental Science & Technology, December, 2017

19 20 21 22 23 24 25 26

* Corresponding author: Tel. +82-2-3408-3826.

27

E-mail: [email protected]

Fax +82-2-3408-4320.

28

ACS Paragon Plus Environment


29

Abstract

30

The adsorption behaviors of different constituents within bulk humic substances (HS) on two

31

nanoparticles, TiO2 and ZnO, were examined by using two-dimensional correlation size

32

exclusion chromatography (2D-CoSEC) and excitation emission matrix – parallel factor

33

analysis (EEM-PARAFAC), which separated bulk HS into different size fractions and

34

fluorescent components, respectively. Subtle changes in the size distributions of HS with

35

increasing adsorbents were successfully identified and tracked via the 2D-CoSEC. From

36

adsorption isotherm experiments, three different HS constituent groups with respect to sizes

37

and fluorescence features were identified by the 2D-CoSEC and EEM-PARAFAC,

38

respectively. The chromatographically separated HS size groups presented dissimilar

39

adsorption behaviors in terms of adsorption affinity and isotherm non-linearity. The sequence

40

orders of adsorption, interpreted from the 2D-CoSEC, was consistent with those of the

41

isotherm model parameters individually calculated for different HS size sub-fractions,

42

signifying the promising application of 2D-CoSEC in obtaining an insight into the

43

heterogeneous adsorption of HS in terms of molecular sizes. EEM-PARAFAC results also

44

supported the major finding of the 2D-CoSEC as shown by the preferential adsorption of the

45

fluorescent components associated with large molecular sizes.

46 47 48

Keywords: EEM-PARAFAC; two-dimensional correlation spectroscopy (2D-COS); size

49

exclusion chromatography (SEC); preferential adsorption; photocatalysts

50 51 1


Page 2 of 30

Page 3 of 30


52

1. Introduction

53

Nano-oxides, such as TiO2 and ZnO, have been widely used for a number of

54

applications including catalysts, industrial ﬁlters, ceramics, coatings, semiconductors, and

55

microelectronics,1,2 which renders the nanoparticles frequently exposed to aquatic

56

environments, even potentially causing harm to the ecosystem.3-5 Meanwhile, dissolved

57

organic matter (DOM), ubiquitously present in aquatic environments, is known to be a

58

heterogeneous mixture of acidic, randomly polymerized, and polydisperse macromolecules

59

with a broad spectrum of sizes and chemical functional groups.6 Humic substances (HS), a

60

major DOM constituent with an operational definition of hydrophobic acids, can strongly

61

interact with inorganic particles.7

62

In aquatic environments, adsorption of HS onto nanoparticles is considered a primary

63

process that affects the fate, stability, surface properties, and environmental functions of the

64

particles.8,9 The major mechanisms by which HS adsorb onto inorganic surfaces are

65

documented to be: (i) hydrophobic interaction, (ii) electrostatic interaction, (iii) van der

66

Waals interaction, (iv) ligand exchange, (v) hydrogen bonding, and (vi) cation bridging.8,9

67

Both the structural heterogeneity of HS and a range of surface properties of nanoparticles

68

make the interactions very complicated even under a fixed solution chemistry. Adsorption

69

behavior of HS has traditionally been described by using bulk HS parameters such as UV

70

absorbance and dissolved organic carbon (DOC),10,11 which often failed to fully address the

71

complex adsorption phenomenon caused by the heterogeneous nature of HS. For example,

72

previous studies demonstrated preferential adsorption of certain HS constituents occurred on

73

mineral surfaces due to surface characteristics with preferable adsorption affinities for

74

specific HS sizes/moieties, which evidenced the limitation of using bulk HS parameters in 2



75 76

fully describing HS adsorption behavior.8,12 Fluorescence excitation emission matrix combined with parallel factor analysis (EEM-

77

PARAFAC) and size exclusion chromatography (SEC), both recent advanced HS

78

characterization tools, can separate bulk HS into several different components or groups

79

with respect to the spectral features and molecular sizes, respectively. The two techniques

80

are based on non-destructive, reliable, and sensitive measurements, which are advantageous

81

for quickly probing and tracking different HS constituents.14-16 In our previous study, EEM-

82

PARAFAC proved its successful application in individually tracing the changes of different

83

fluorescent HS components in photo-oxidation systems containing TiO2.17 It has also been

84

utilized to characterize DOM adsorption onto granular activated carbon or graphene

85

oxide.18,19. Meanwhile, Mwaanga et al. (2014) and Drosos et al. (2015) used the SEC

86

technique to demonstrate the preferential adsorption of certain sized HS molecules onto TiO2

87

particles.20,21 Combined use of the two tools could advance the understanding of HS

88

adsorption behavior on nano-particles because individual results are closely linked together

89

and complementary to each other. 14,18

90

Two dimensional correlation spectroscopy (2D-COS) is a powerful tool for exploring

91

the dynamic features of the relationships between two different spectral variables (e.g.,

92

wavelengths).22 Combined information of the synchronous and the asynchronous maps,

93

which are generated from 2D-COS, reveals the sequential order of any subtle spectral

94

change in response to external perturbations in a high resolution. It can also guide one to

95

identify the exact bands (or the ranges of variables) responding to specified

96

processes/reactions, presenting a clear picture of the dynamic changes occurring in a wide

97

range of variables.22 There is no doubt that using 2D-COS is beneficial for HS studies 3


Page 4 of 30

Page 5 of 30


98

considering the heterogeneous character of HS. The spectral variables used for 2D-COS

99

maps were mostly based on UV-visible and fluorescence spectroscopy or Fourier-transform

100

infrared spectroscopy (FT-IR).23-25 However, it should be noted that 2D-COS applications

101

are not limited to such spectroscopic measurements because it is a mathematical

102

representation for resolving the overlapping signals of chemical mixtures like HS.21 For

103

example, He et al (2015) have shown its usefulness of 2D-COS and SEC chromatograms in

104

combination in examining size-dependent changes of DOM with composting process.26 The

105

applicability can be extended to other HS studies such as HS adsorption behavior onto

106

minerals or nano-particles.

107

Although large sized HS molecules tend to adsorb onto inorganic surfaces to a great

108

extent, the exact preference of the adsorption for different sized HS molecules is dependent

109

on the surface characteristics and solution pH.27-29 Considering the complexity of the size-

110

dependent HS adsorption onto nanoparticles, 2D-COS combined with SEC (2D-CoSEC) can

111

be suggested as a promising tool to obtain an insight into the interactions between HS and

112

nanoparticles. Compared with the conventional SEC technique, 2D-CoSEC can be more

113

advantageous in identifying any subtle changes or differences that might occur within a

114

small range of HS molecular sizes upon the complex HS adsorption. The objectives of this

115

study were (1) to track the changes of different constituents within bulk HS upon the

116

adsorption onto two different nanoparticles (TiO2 and ZnO), and (2) to explore the

117

applicability of 2D-CoSEC and EEM-PARAFAC to obtain new insights into the

118

heterogeneous adsorption behavior.

119 120

2. Materials and Methods 4



121

2.1 Reagents

122

Two types of nanoparticles with similar particle sizes, TiO2 and ZnO, were used for this

123

study without further purification. The nano-particles have been widely used in a wide range

124

of applications such as electronics, chemical sensing, antimicrobial agents, and photocatalysts.

125

The TiO2 (AEROXIDE® P25) nanoparticles were purchased from Sigma-Aldrich, with a BET

126

surface area of 50±15 m2/g and an average size of 21 nm. The ZnO nanoparticles, obtained

127

from NanoAmor, have a BET surface area of 40 m2/g and an average size of 20 nm. The

128

point zero of charge (PZC) values of TiO2 and ZnO were ~7.0 and ~10.0, respectively, which

129

were determined by zeta potential measurements (Fig. S1). The measured PZC values were

130

comparable to those previously reported.29-32 Each type of nanoparticle was mixed with

131

distilled deionized water (DDW) to prepare a slurry before an amount of HS (15 mg C/L) was

132

added. The HS-nanoparticle suspension solutions could simulate natural environments and/or

133

industrial wastewater containing the nano-particles, in which HS can interact with suspended

134

nano-particles.

135

Elliott soil humic acid (ESHA) and Suwannee River humic acid (SRHA) were purchased

136

from the International Humic Substance Society (IHSS). The materials represent two

137

contrasting HS sources (i.e., soil-derived versus aquatic HS) with different structural and

138

compositional features (www.humicsubstnaces.org).18

139 140

2.2 Adsorption isotherm experiments

141

Adsorption experiments were conducted in batch using an initial HS concentration of 15

142

mgC/L, which fell within the range found in natural/engineered systems.14,33 The amounts of

143

nanoparticles were varied from 0.0 to 1.0 g/L with stepwise increases of 0.025 g/L up to 0.1 5


Page 6 of 30

Page 7 of 30


144

g/L and 0.1 g/L for the rest, which were determined based on preliminary tests to achieve the

145

adsorption isotherm. The solution pH was fixed to 7.0 by adding 0.1 N NaOH or 0.1 N HCl

146

solutions. The mixtures were shaken at room temperature (20±1 oC) on an orbit shaker at 150

147

rpm for 24 hours in the dark. No substantial change of pH was observed during the shaking,

148

which only deviated by ±0.3 from the original value. Dissolved HS (or the residual HS after

149

adsorption) was separated by centrifugation at 5000 rpm for 30 min, and the supernatant was

150

filtered through a pre-washed 0.2 µm membrane filter (cellulose acetate membrane, Advantec)

151

to remove the remaining particles. Adsorption isotherm parameters were estimated based on a

152

simple Freundlich model 1

153

Qe =k F Cen

(1)

154

Where Ce is the equilibrium HS concentration in solution. kF and 1/n represent the

155

Freundlich model capacity factor and the Freundlich model site heterogeneity factor, an

156

indicator of isotherm nonlinearity, respectively.

157 158

2.3 Analytical methods

159

DOC concentrations were determined using a TOC analyzer (Shimadzu V-CPH). UV–

160

visible spectra from 200 to 700 nm were recorded for HS samples using a UV–visible

161

spectrophotometer (UV-1800, Shimadzu) with a 1-cm quartz cuvette.

162

Fluorescence EEMs were measured with a fluorescence spectrophotometer (F-7000,

163

Hitachi) by scanning the emission spectra from 280 to 550 nm at 1 nm-increments and

164

stepping through the excitation wavelengths (Ex) from 220 to 450 nm at 5 nm intervals.

165

Excitation and emission slits were adjusted to 10 nm and 5 nm, respectively, and the scanning

166

speed was fixed at 12,000 nm min–1. To limit second order Raleigh scattering, a 290 nm

167

cutoff filter was used for all the fluorescence measurements. If the UV absorption coefficient 6



168

of samples at 254 nm exceeded 0.05 cm–1, they were diluted to avoid the need for inner-filter

169

correction.34 The background fluorescence EEM from a blank solution (DDW) was also taken

170

into account by subtraction. Fluorescence intensity was normalized using quinine sulfate

171

equivalent units (QSU), in which 1 QSU corresponded to the maximum fluorescence

172

intensity for 1 µg/L of quinine in 0.1 N H2SO4 at Ex/Em of 350/450 nm. Relative precisions

173

of intermediate MW > low MW


Page 30 of 30

2D-CoSEC

Recommend Documents