A Lanthanide Phosphinidene Complex: Synthesis ... - ACS Publications

Jason D. Masuda,, Kimberly C. Jantunen,, Oleg V. Ozerov,, Kevin J. T. Noonan,, Derek P. Gates,, Brian L. Scott, andJaqueline L. Kiplinger*. Los Alamos...
1 downloads 0 Views 393KB Size
Published on Web 01/31/2008

A Lanthanide Phosphinidene Complex: Synthesis, Structure, and Phospha-Wittig Reactivity Jason D. Masuda,† Kimberly C. Jantunen,† Oleg V. Ozerov,‡ Kevin J. T. Noonan,§ Derek P. Gates,§ Brian L. Scott,† and Jaqueline L. Kiplinger*,† Los Alamos National Laboratory, Mail Stop J514, Los Alamos, New Mexico 87545, Department of Chemistry, Brandeis UniVersity, MS015, 415 South Street, Waltham, Massachusetts 02454, and Department of Chemistry, UniVersity of British Columbia, 2036 Main Mall, VancouVer, British Columbia, V6T 1Z1 Canada Received November 21, 2007; E-mail: [email protected]

Although phosphinidene (M ) P) complexes are quite common in transition metal chemistry, analogous lanthanide derivatives remain unknown.1 The absence of bridging or terminal lanthanide phosphinidene complexes is striking since the related actinide series has two known structurally characterized examples belonging to uranium: (C5Me5)2U(dPMes*)(OdPMe3) (Mes* ) 2,4,6-tBu3C6H2),2 featuring a terminal phosphinidene group, and [(C5Me5)2U(OCH3)2]2PH,3 possessing a bridging phosphinidene. Recently, highly reactive transition metal species such as group 4 alkylidenes, alkylidynes, phosphinidenes, and imides have been stabilized using the robust pincer PNP ligand set.4 Herein we report the use of the PNP ligand 1 to prepare, isolate, and study the first example of a lanthanide phosphinidene complex. Reaction of the PNP ligands 1 and 2 with Lu(CH2SiMe3)3(THF)2 at room temperature in pentane and toluene, respectively, gave the corresponding lutetium bis(alkyl) complexes 3 and 4, respectively, as yellow solids in good isolated yield (Scheme 1). Whereas 3 is highly soluble in ethers and hydrocarbons and is best purified by recrystallization from hot TMS2O to give large yellow blocks, complex 4 must be triturated from pentane to yield an insoluble yellow powder. The most diagnostic feature in the 1H NMR spectra for the two Lu(III) bis(alkyl) complexes are the methylene resonances at δ -0.33 (3) and δ -0.08 ppm (4). Both 3 and 4 also display signals in their 31P{1H} NMR spectra at δ 14.5 and -4.8 ppm, respectively, downfield from the resonances observed for the free ligands (1, δ -12.9 ppm; 2, δ -18.7 ppm).5 Additionally, the 31P NMR resonance of 3 compares favorably to the structurally related d0 complex (PNPiPr)ZrMe3 (δ 13.0 ppm).4a The molecular structure of compound 3 is presented in Figure 1 and reveals a distorted square pyramidal geometry about the Lu(III) metal center with one alkyl group in the apical position and the PNPiPr ligand and the other alkyl group forming the pyramid base. The Lu-C bond lengths (2.307(6), 2.322(6) Å) fall within the range typically observed for Lu-CH2SiMe3 bonds.6 The Lu-N (2.244(5) Å) and Lu-P bonds (2.8534(15), 2.8547(15) Å) are somewhat shorter than those reported for the structurally related [{2-(Ph2P)C6H4}2N]Lu(CH2SiMe3)2(THF) (Lu-N ) 2.342(3) Å; Lu-P ) 2.9096(9), 2.9765(9) Å).7 This difference may be attributed to the lack of coordinated THF in 3. As shown in Scheme 1, reaction of a toluene solution of 3 with 1 equiv of MesPH2 (Mes ) 2,4,6-Me3-C6H2) at 80 °C for 12 h afforded the Lu(III) phosphinidene complex 5 as a cherry red solid in 52% isolated yield. The 31P{1H} NMR spectrum of 5 exhibits a diagnostic quintet at δ 186.8 ppm coupled to a triplet at δ 18.1 ppm (2JP-P ) 14.6 Hz) consistent with two bridging phosphinidene units between two (PNPiPr)Lu fragments. † ‡ §

Los Alamos National Laboratory. Brandeis University. University of British Columbia.

2408

9

J. AM. CHEM. SOC. 2008, 130, 2408-2409

Figure 1. Molecular structure of complex 3 with thermal ellipsoids projected at the 50% probability level. Selected bond distances (Å) and angles (°): Lu(1)-N(1) 2.244(5), Lu(1)-C(5) 2.307(6), Lu(1)-C(1) 2.322(6), Lu(1)-P(1) 2.8534(15), Lu(1)-P(2) 2.8547(15), Lu(1)-C(1)-Si(1) 126.2(3), Lu(1)-C(5)-Si(2) 127.6(3). Scheme 1

The most interesting aspect of the structure is the asymmetric Lu2P2 core. The Lu-Lu distance of 3.9353(5) Å is longer than the sum of their ionic radii (1.722 Å).8 The two shorter bonds of the core, Lu(1)-P(3) (2.6031(16) Å) and Lu(2)-P(4) (2.5973(15) Å), are on average ∼0.06 Å shorter than Lu(1)-P(4) (2.6724(14) Å) and Lu(2)-P(3) (2.6527(16) Å) as well as shorter than the Lu-P bond distances reported for the few known lutetium phosphide complexes (e.g., [Me2Si(C5Me4)(µ-PPh)Lu(CH2SiMe3)]2, Lu-P ) 2.826(1), 2.786(1) Å; [Me2Si(C5Me4)(µ-PCy)Lu(CH2SiMe3)]2, Lu-P 10.1021/ja7105306 CCC: $40.75 © 2008 American Chemical Society

COMMUNICATIONS

In summary, the first lanthanide complex featuring a phosphinidene functional group has been prepared and isolated. Although the large ionic radii of the lanthanide ions make it challenging to introduce enough steric saturation to stabilize a terminal phosphinidene, these results demonstrate that the formation of lanthanide phosphinidenes is possible and that the phosphinidene dimer 5 behaves as a nucleophilic phosphinidene transfer reagent. Efforts focused on stabilizing a terminal lanthanide-based phosphinidene complex by modifying both the supporting ligand and the substituent on the phosphorus atom are currently underway in our laboratory.

Figure 2. Molecular structure of complex 5 with thermal ellipsoids projected at the 50% probability level. Selected bond distances (Å) and angles (°): Lu(1)-P(3) 2.6031(16), Lu(1)-P(4) 2.6724(14), Lu(2)-P(3) 2.6527(16), Lu(2)-P(2) 2.5973(15), Lu(1)-N(1) 2.296(4), Lu(2)-N(2) 2.295(4), Lu(1)-P(3)-Lu(2) 96.96(5), Lu(1)-P(4)-Lu(2) 96.61(5), P(3)Lu(1)-P(4) 82.90(5), P(4)-Lu(2)-P(3) 83.40(5).

) 2.817(1), 2.789(1) Å; [Me2Si(C5Me4)(PPh)Lu(µ-H)]2(THF)3, Lu-P ) 2.788(2), 2.861(2) Å; [Me2Si(C5Me4)(PMes*)Lu(µ-H)(THF)]2, Lu-P ) 2.683(1) Å; [Cp2Lu{µ-PPh2}2Li(tmeda)], Lu-P ) 2.782(1), 2.813(2) Å).6a,9 Interestingly, the mesityl rings are nearly planar with the Lu2P2 core, with Lu(1)-P(4)-C(10)-C(11) and Lu(2)-P(3)-C(1)-C(2) dihedral angles of 7.11 and 5.81°, respectively. This likely minimizes unfavorable interactions between the ortho-CH3 groups on the mesityl rings and the iPr groups on the PNP ligand. Finally, the sum of the angles around P(3) and P(4) are 358.9 and 356.5°, respectively, allowing for π-donation of the phosphorus lone pairs to the Lu atoms. All of these combined structural features are consistent with the formulation of complex 5 as an asymmetric dimer of the terminal phosphinidene, (PNPiPr)LudPMes, with a bond order greater than 1 in the Lu(1)-P(3) and Lu(2)-P(4) interactions. Preliminary reactivity studies demonstrate that 5 behaves similarly to known nucleophilic phosphinidene systems such as [(N3N)TadPR] (R ) Ph, Cy, tBu; N3N ) (Me3SiNCH2CH2)3N)10 and Cp2Zr(dPMes*)(PMe3) (Figure 2).11 Complex 5 reacts smoothly as a phospha-Wittig reagent with aldehydes and ketones to give the corresponding phosphaalkenes. For example, reaction of 5 with pivalaldehyde affords (E)-MesPdC(H)tBu (48% yield, 31P NMR δ 227.1 ppm)12 and with benzophenone yields MesPdCPh2 (72% yield, 31P NMR δ 234.0 ppm).13 Concomitant formation of [(PNPiPr)LuO]x is likely, but to date, we have not been able to ascertain the fate of the lutetium byproduct. Attempts to disrupt the dimer and stabilize a terminal phosphinidene using Lewis bases were unsuccessful (PMe3, tmeda, DMAP, or bipyridines) or resulted in decomposition (OdPMe3). Kinetic stabilization was also explored using the sterically demanding phosphine, Mes*PH2. Reaction of a toluene-d8 solution of 3 or 4 with Mes*PH2 at 80 °C for 7-12 h resulted in quantitative formation of the phosphaindole 6 as determined by 31P NMR spectroscopy (eq 1).

For transition metals, the production of 6 signals the generation of a transient phosphinidene complex,1c,f which reacts with a C-H bond on the Mes* ortho-tBu group to give the phosphaindole.14,15

Acknowledgment. For financial support, we acknowledge LANL (Director’s PD Fellowship to J.D.M.), the LANL G. T. Seaborg Institute (PD fellowship to J.D.M.; summer student fellowship to K.C.J.), the Division of Chemical Sciences, Office of Basic Energy Sciences, the LANL LDRD Program (J.L.K.), the NSERC of Canada for Discovery & Tools grants (D.G.) and a PGS D scholarship (K.J.T.N.), the NSF (CHE-0517798), and the Sloan & Dreyfus Foundations (O.V.O.). We are thankful to Y. Zhu, M. Puri, and Dr. S. Gatard for the synthesis of initial samples of 1 and 2 used in this work. Supporting Information Available: Full experimental and characterization details for all new compounds. Crystallographic data for 3 and 5. This material is available free of charge via the Internet at http:// pubs.acs.org. References (1) (a) Nugent, W. A.; Mayer, J. M. Metal-Ligand Multiple Bonds; WileyInterscience: New York, 1988. (b) Cowley, A. H. Acc. Chem. Res. 1997, 30, 445-451. (c) Lammertsma, K. Top. Curr. Chem. 2003, 229, 95119. (d) Giesbrecht, G. R.; Gordon, J. C. Dalton Trans. 2004, 23872393. (e) Clark, D. L.; Gordon, J. C.; Hay, P. J.; Poli, R. Organometallics 2005, 24, 5447-5787. (f) Weber, L. Eur. J. Inorg. Chem. 2007, 40954117. (2) Arney, D. S. J.; Schnabel, R. C.; Scott, B. L.; Burns, C. J. J. Am. Chem. Soc. 1996, 118, 6780-6781. (3) Duttera, M. R.; Day, V. W.; Marks, T. J. J. Am. Chem. Soc. 1984, 106, 2907-2912. (4) (a) Weng, W.; Yang, L.; Foxman, B. M.; Ozerov, O. V. Organometallics 2004, 23, 4700-4705. (b) Mindiola, D. J. Acc. Chem. Res. 2006, 39, 813821. (c) Zhao, G.; Basuli, F.; Kilgore, U. J.; Fan, H.; Aneetha, H.; Huffman, J. C.; Wu, G.; Mindiola, D. J. J. Am. Chem. Soc. 2006, 128, 13575-13585. (d) Bailey, B. C.; Fan, H.; Huffman, J. C.; Baik, M. H.; Mindiola, D. J. J. Am. Chem. Soc. 2007, 129, 8781-8793. (e) Liang, L. C. Coord. Chem. ReV. 2006, 250, 1152-1177. (5) (a) Fan, L.; Foxman, B. M.; Ozerov, O. V. Organometallics 2004, 23, 326-328. (b) Fan, L. Ph.D. Thesis, Brandeis University, 2006. (6) For examples, see: (a) Tardif, O.; Nishiura, M.; Hou, Z. Tetrahedron 2003, 59, 10525-10539. (b) Cameron, T. M.; Gordon, J. C.; Scott, B. L. Organometallics 2004, 23, 2995-3002. (c) Jantunen, K. C.; Scott, B. L.; Hay, P. J.; Gordon, J. C.; Kiplinger, J. L. J. Am. Chem. Soc. 2006, 128, 6322-6323. (7) Zhang, L.; Suzuki, T.; Luo, Y.; Nishiura, M.; Hou, Z. Angew. Chem., Int. Ed. 2007, 46, 1909-1913. (8) Shannon, R. D. Acta Cryst. 1976, A32, 751-767. (9) Schumann, H.; Palamidis, E.; Schmid, G.; Boese, R. Angew. Chem., Int. Ed. Engl. 1986, 25, 718-719. (10) Cummins, C. C.; Schrock, R. R.; Davis, W. M. Angew. Chem., Int. Ed. Engl. 1993, 32, 756-759. (11) (a) Stephan, D. W. Angew. Chem., Int. Ed. 2000, 39, 314-329 and references therein. (b) Breen, T. L.; Stephan, D. W. J. Am. Chem. Soc. 1995, 117, 11914-11921. (12) Literature (C6D6) δ 228.4 ppm: Brym, M.; Jones, C.; Waugh, M.; HeyHawkins, E.; Majoumo, F. New J. Chem. 2003, 27, 1614-1621. (13) Literature (CDCl3) δ 233.06 ppm: Klebach, Th. C.; Lourens, R.; Bickelhaupt, F. J. Am. Chem. Soc. 1978, 100, 4886-4888. (14) For representative examples, see: (a) Champion, D. H.; Cowley, A. H. Polyhedron 1985, 4, 1791-1792. (b) Amor, I.; Garcia, M. E.; Ruiz, M. A.; Saez, D.; Hamidov, H.; Jeffery, J. C. Organometallics 2006, 25, 48974869. (15) Phosphaindole 6 has been made from Mes*PH2 using transition metal catalysts. Zr: (a) Masuda, J. D.; Hoskin, A. J.; Graham, T. W.; Beddie, C.; Fermin, M. C.; Etkin, N.; Stephan, D. W. Chem. Eur. J. 2006, 12, 8696-8707. Rh: (b) Bo¨hm, V. P. W.; Brookhart, M. Angew. Chem., Int. Ed. 2001, 40, 4694-4696. (c) Stradiotto, M. Fujdala, K. L.; Tilley, T. D. HelV. Chim. Acta 2001, 84, 2958-2970.

JA7105306

J. AM. CHEM. SOC.

9

VOL. 130, NO. 8, 2008 2409