A New Solution to an Old Problem: Synthesis of ... - ACS Publications

Nov 30, 2016 - In the purified PPP precursor (yield ≈ 10 wt %, Mw = 11 130 g/mol), ... The TGA trace shows a loss in mass of the precursor polymer a...
0 downloads 0 Views 1MB Size
Subscriber access provided by UNIVERSITY OF SOUTH CAROLINA LIBRARIES

Communication

A New Solution to an Old Problem: Synthesis of Unsubstituted Poly-(para-Phenylene) Ali Abdulkarim, Felix Hinkel, Daniel Jänsch, Jan Freudenberg, Florian Ernst Golling, and Klaus Müllen J. Am. Chem. Soc., Just Accepted Manuscript • DOI: 10.1021/jacs.6b10254 • Publication Date (Web): 30 Nov 2016 Downloaded from http://pubs.acs.org on November 30, 2016

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

Journal of the American Chemical Society is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Journal of the American Chemical Society

A New Solution to an Old Problem: Synthesis of Unsubstituted Poly-(para-Phenylene) Ali Abdulkarim,a,b,d Felix Hinkel,b,c Daniel Jänsch,a,b Jan Freudenberg,a,b Florian E. Golling,a,b,d and Klaus Müllen*,d a

InnovationLab, Speyererstr. 4, 69115, Heidelberg, Germany

b

Organisch-Chemisches Institut, Ruprecht-Karls-Universität Heidelberg, 69120, Heidelberg, Germany

c

Centre for Advanced Materials, Ruprecht-Karls-Universität Heidelberg, 69120, Heidelberg, Germany

d

Max Planck Institute for Polymer Research, Ackermannweg 10, 5128 Mainz, Germany

KEYWORDS: poly-para-phenylene, organic electronics, precursor-route, film-processing, thermal aromatization

ABSTRACT: Unsubstituted and structurally well-defined poly-(para-phenylene) (PPP) is long-desired as an organic semiconductor prototype of conjugated polymers. To date, several attempts to synthesize unsubstituted, pristine and high molecular-weight PPP failed. Here, we solve this synthetic problem by a versatile precursor route. Suzukipolymerization of kinked disubstituted 1,4-dimethoxy-cyclohexadienylene monomers yielded a well-soluble, nonaromatic precursor polymer. Its solubility allowed processing by spin-coating into nanometer-thick films. Subsequent additive-free thermal treatment induced aromatization and led to exclusively para-connected, highly fluorescent PPP with a length of about 75 phenylene units.

As the prototype of a conjugated polymer, unsubstituted and structurally well-defined poly-(para-phenylene) (PPP) was the quest of various synthetic approaches. In neutral form, PPP is an insulator, whereas upon doping its conductivity increases up to 500 Ω-1cm-1.1 Its compressive strength (207 MPa), low density (1.210 g cm-3) as well as high stability towards temperature, oxygen and moisture render PPP a promising candidate for applications in organic electronics.2 In the past, several routes towards PPP have been developed. Since already short para-phenylene oligomers (≤ 6 phenylenes) are barely soluble in common organic solvents, all direct arylaryl couplings via 1,4-dihalobenzenes lead to regioselectively formed but very short oligomers (Scheme 1 a).3 The oxidative coupling of benzene results in a significant amount of ortho-connected and hence illdefined phenylene units.4 Longer PPP (n≈30), could be obtained by the introduction of solubilizing side-chains (alkyl/alkoxy groups) in ortho-position (Scheme 1b),5 unfortunately resulting in low charge carrier mobility and an undesired blue-shift of the emission bands due to deplanarization of the polymer backbone.6 Recently, several approaches for the surface-assisted synthesis of PPP have been published.7 Drawbacks of this approach were the requirement of the high Miller-index metal surfaces, the obtained low quantity of PPP, lack of follow-up processability as well as high experimental effort. A promising strategy towards unsubstituted PPP is the socalled precursor-route, by which Grubbs could successfully address the problem of regioselectivity

(Scheme 1 c).8 Although precursor-polymers for subsequent syn-elimination reactions were obtained, structurally perfect and unsubstituted PPP without impurities (e.g. acid residues) could not be achieved so far (Scheme 1).9

[3-7]

Scheme 1. Different synthetic approaches towards PPP.

We sought to overcome the above-mentioned obstacles of the synthesis of regioregular high molecular weight PPP by pursuing a novel precursor approach. Herein, we report the first facile synthesis of unsubstituted,

ACS Paragon Plus Environment

Journal of the American Chemical Society

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

structurally well-defined PPP. By utilizing kinked monomers containing disubstituted cyclohexadienylene moieties, good solubility is introduced to the resulting precursor polymer. Furthermore, this cyclohexadienylene is convertible to a phenylene unit by aromatization reactions. Hence, processing of thin films from solution, subsequent additive-free thermal aromatization to PPP layers and their optical characterization are enabled.

Scheme 2. Synthesis of monomers and (precursor) polymer. Conditions: i) n-BuLi, THF, -78 °C; ii) NaH, MeI, THF, 25 °C; iii) n-BuLi, isopropoxyboronic acid pinacol ester, THF, -78 °C; iv) Pd(PPh3)4, Cs2CO3 , THF/H2O; v)