A new zinc difluorocarbenoid reagent - The Journal of Organic

Yu Ren, Timothy P. Lodge, and Marc A. Hillmyer. Journal of the American Chemical Society 1998 120 (27), 6830-6831. Abstract | Full Text HTML | PDF | P...
0 downloads 0 Views 400KB Size
5420

J . Org. Chem. 1990,55,5420-5422

hydroxypheny1)pyridazine (8), mp 190.5-192 "C dec. Recrystallization from MeCN gave 8 as pale yellow prisms, mp 195.5-197 "C dec: NMR 6 6.37 (dd, 1 H , J = 9.2 and 2 Hz), 6.44 (d, 1 H, J = 2 Hz), 7.09 (d, 1 H, J = 9.2 Hz), 7.98 (s, 1 H), 9.84 (br 8, 1 H), 10.0 (br s, 1 H) ppm; MS m / z 260 (131,258 (631,256 (loo),

222 (3),220 (9),193 (3),158 (30),129 (16). Anal. Calcd for CloHsC12N202:C, 46.72;H, 2.35; N, 10.90. Found: C, 46.61;H, 2.21;N, 10.79. After removal of a further 2.1 g (11%) of crude 8 from the recrystallization liquors, evaporation gave 2.9 g of a solid which was combined with 0.3 g obtained by EtOAc extraction of the original aqueous filtrate. The solid (3.2g) was digested with warm CHCI3-MeOH, 251,leaving 0.4 g of insoluble residue. Column chromatography of the soluble material gave 0.64 g (3.5%) of the less polar component, which was recrystallized from MeOH to give 0.25 g (1.4%) of 3,4-dichloro-6-(2,4-dihydroxyphenyl)pyridazine (10)as pale yellow platelets, mp 245 "C dec: NMR 6 6.4-6.5 (m, 2 H), 7.87 (m, 1 H), 8.65 ( 8 , 1 H), 10.1(9, 1 H), 11.65 (9, 1 H) ppm; MS m/z 260 (12),258 (641,256 (loo),223 (7),221 (21),195 (16),193 (42). Anal. Calcd for CloH6C1zNz0z:C, 46.72;H, 2.35;N, 10.90. Found: C, 46.55;H, 2.27;N, 10.89. Further elution gave 0.63 g (3.5%) of the more polar isomer, which was recrystallized from acetone to give 0.33 g (2%) of 3,5-dichloro-6-(2,4-dihydroxyphenyl)pyridazine(9) as white granular crystals, mp 185-187 "C: NMR 6 6.36 (dd, 1 H, J = 8.3 and 2.2 Hz),6.42 (d, 1 H, J = 2.2 Hz), 7.09 (d, 1 H, J = 8.3 Hz), 8.33 (s, 1 H), 9.72 (s, 1 H), 9.82 (s, 1 H) ppm; MS m/z 260 (4), 258 (19),256 (30),223 (35),221 (loo),167 (6),165 (17),129 (7). Anal. Calcd for CloH8Cl2N2O2:C, 46.72;H, 2.35;N, 10.90. Found: C, 46.78;H, 2.26;N, 10.90. 4-(2,4-Dihydroxyphenyl)pyridazine(12). A solution of 8 (0.8 g, 3 mmol) in aqueous NaOH (0.5 g, 12 mmol in 40 mL) was shaken under Hz (40psi) with 10% Pd/C (0.1g) until reaction

was complete. Neutralization of the filtered solution gave 0.53 g (90%) of a solid mp 245-247 "C. Recrystallization from aqueous MeOH gave 12 as pale yellow needles, mp 248-249 "C: NMR 6 6.40(dd, 1 H, J = 8.5 and 2.3 Hz), 6.48 (d, 1 H, J = 2.3 Hz), 7.37 (d, 1 H, J = 8.5Hz), 7.82 (dd, 1 H, J = 5.5 and 2.4 Hz), 9.11 (dd, lH,J=5.5andl.lHz),9.44(dd,lH,J=2.3and1.1Hz),9.98 (br s, 2 H) ppm; MS m / t 188 (loo),160 (4),134 (301,131 (la), 105 (7), 103 (lo), 77 (13). Anal. Calcd for C,,JI8N2O2:C, 63.82H, 4.29;N, 14.89. Found: C, 63.59;H, 4.12;N, 15.15. 3-(2,4-Dihydroxyphenyl)pyridazine(13). Hydrogenolysis of 3a by the method of Stanovnik' gave 13,mp 265-269 "C (lit.' mp 274-275 "C): NMR 6 6.38 (d, 1 H , J = 2.4 Hz), 6.43 (dd, 1 H, J = 8.7and 2.4 Hz), 7.81 (dd, 1 H, J = 4.8 and 9.0Hz), 7.86 (d, 1 H, J = 9.0Hz), 8.36 (dd, 1 H, J = 9.0 and 1.4Hz), 9.08 (dd, 1 H, J = 4.8 and 1.4 Hz), 10.0(br s, 1 H), 13.5 (br s, 1 H) ppm. 3-Chloro-7-hydroxybenzofuro[2,3-c]pyridazine(11). A stirred mixture of 8 (2.0g, 7.8mmol) and K2C03(1.2g, 8.7 mmol) in acetone (50 mL) was heated under reflux for 18 h. After

evaporation the residue was treated with water (50 mL), and the filtered solution was made pH 5-6 with AcOH to give 1.63 g (97%) of a solid. Recrystallization from aqueous DMF afforded 1.1 g (65%) of 11 as cream-colored microcrystals, which appeared to decompose above 270 "C but did not melt below 360 "C. TLC analysis indicated that this compound was a minor byproduct in the preparation of 8 and was also formed when 8 decomposed at its melting point. Compound 11 failed to give a colored reaction with alkaline diazotized sulfanilic acid, and its aqueous alkaline solutions displayed a marked green fluorescence in daylight: NMR d 6.99 (dd, 1 H, J = 8.6 and 2.1 Hz), 7.14 (d, 1 H, J = 2.1 Hz), 8.10 (d, 1 H, J = 8.6 Hz), 8.47 (s, 1 H), 10.7 (v br s, 0.4H) ppm; IR (Nujol mull) 3300-2300 (series bands), 1630 cm-'; MS m/z 222 (33),220 (loo),166 (7),164 (2),129 (55);UV (95% EtOH) ,A, (log t) 332 (4.25),389 (3.65),(basic 95% EtOH) 389 (4.47),(acidic 95% EtOH) 332 (4.32)nm; pK, (25 "C) 7.5. Anal. Calcd for CloH,CINzOz: C, 54.44;H, 2.28;N, 12.70. Found: C, 54.46;H, 2.34;N, 12.71. Acknowledgment. We thank our colleagues in the Physical Organic Chemistry Department of Smith Kline & French Research for providing microanalytical, spectral, and physical data.

New Zinc Difluorocarbenoid Reagent William R. Dolbier, Jr.,* Hanna Wojtowicz,' and Conrad R. Burkholder Department of Chemistry, University of Florida, Gainesville, Florida 3261 1 Received March 29, 1990

It was recently reported that good yields of chlorofluorocarbene adducts could be obtained from the reaction of CFC1, with reduced titanium in the presence of alkenes.',, Unfortunately, the utilization of CF2C1,, CF2Br,, or CF212in this same reaction did not lead to generally good yields of the analogous difluorocarbene adducts (Table I).

THF,0-5OC

I

\

Numerous methods of synthesizing gem-difluorocyclopropanes through the addition of difluorocarbene to olefins have been reported., The yields of cyclopropanes, however, have been seen to be greatly dependent upon both the nucleophilicity of the olefin substrate and the nature of the carbenelcarbenoid reagent. Two of the most effective methods we4 and others have used for generation of difluorocarbene are Seyferth's phenyl(trifluor0methy1)mercurf and Burton's triphenyl(bromodifluoromethyi)phosphonium bromides reagents. These reagents give excellent yields with relatively nucleophilic alkenes. However, phenyl(trifluoromethy1)mercw-yis both toxic and nontrivial to synthesize, while for optimum results Burton's reagent requires use of scrupulously dry solvents. We have found that the thermolysis of hexafluoropropylene oxide' provided a more reactive difluorocarbene for use with nonnucleophilic alkenes. Unfortunately the high temperatures required (1180 "C) for this thermal extrusion of CF,: often precludes its use. There therefore has been a continued effort to find a simple and effective way of generating a Oreactive" difluorocarbene reagent for use a t more moderate temperatures. We now report a new and useful difluorocarbene reagent, which is about equal in reactivity to the Seyferth and Burton reagents but has the advantage of being simply and cheaply prepared and needs no special, superanhydrous conditions. As such, it should prove to be the method of choice for synthesis of most difluorocyclopropane compounds.

/ CH3

I,(cat), THF, RT

In a reaction essentially analogous to the SimmonsSmith reaction: difluorodibromomethane reacts with zinc in tetrahydrofuran a t room temperature in the presence of an olefin to give difluorocyclopropanes in yields up to 96%. A total of 15 olefins have been utilized in this reaction, and Table I1 summarizes the results obtained. Most of the 1,l-difluorocyclopropanesthat were prepared had been previously reported,*13 and they could be un'Permanent address: Instytut Chemii, Uniwereytet im. Adama Mickiewicza, Poznan, Poland.

0022-3263/90/1955-5420$02.50/0 0 1990 American Chemical Society

J . Org. Chem., Vol. 55, No. 19, 1990 5421

Notes Table I. Yields of Difluorocarbene Adducts in the Difluorodihalomethane/Reduced Titanium Reaction with Alkenes in THF" alkene substrate 2,3-dimethyl-2-butene 2-ethyl-1-butene 2-methyl-2-butene a-methylstyrene

CF,X, CF2Br2 CF,Cl, CF&CF2Br2 CF,Br, CF&

% yield

33 3.5 41 3.2 traces 16

Another indication of the normal behavior of our CF2: reagent was the fact that its reaction with norbornadiene led to a relative degree of 1,4 versus 1,2 carbene addition that was similar to that observed by Jefford in his study wherein the CF2 was derived from Burton's method6 (Le., decomposition of triphenyl(bromodifluoromethy1)phosphonium bromide in triglyme).16

CFzBrZ, Zn

"Procedure as in ref 2.

____)

THF

Table 11. Yields and IsF Nuclear Magnetic Resonance Data for the Reaction of Zinc Difluorocarbenoid with Various Alkenes" alkene substrate % yield 6 , ppm (CDCl,) J F F ~ ref 2,3-dimethyl-2butene l-phenylcyclopentene 2-methyl-2-butene a-methylstyrene 2-ethyl-1-butene ( E ) -l-phenylpropene cyclopentadiene 1,3-butadiene styrene cis-2-butene trans-2-butene cyclohexene 1,4-cyclohexadiene 1-hexene

(12%)

9, 10

96

-148.6

84

-127.1, -141.6 (dm) 155

72 71 40 29

-138.8, -150.8 (dm) 151 -132.8, -137.8 (dd)* 150 -139.0 (m) -137.8, -138.9 (dd)b 153

9, 11 10, 11 9

21 17 15 7 4 7 7 6

-128.4, -154.7 (dm) -128.5, -141.6 (ddIb -126.1, -142.9 (dm) -127.4, -156.3 (dd)b -141.8 (br s) -125.7 (dt)b,-150.4 -127.7, -154.2 (dm) -128.2, -145.0 (dm)

12

(9)

147 156 153 158

11

10 9, 11 9, 11 162.5 9, 13 155 156

All products were characterized by their I9F NMR spectra. When able to be measured, JFH'S were found to be 12-14 Hz.

ambiguously identified by their characteristic 19FNMR spectra. It should be noted that, in general, a 3-fold excess of carbene reagent was utilized in the reaction so as to conserve alkene. The behavior of the reactive species derived from this zinc carbenoid reagent indicates that a "free" carbene is probably involved in the reaction. Certainly the reactivity profile of the reagent resembles those exhibited by most other difluorocarbene reagents.14 In our case, when a 10-fold excess of each of 2,3-dimethyl-2-butene and amethylstyrene was used in the reaction, the relative reactivity as derived directly from the ratio of cyclopropane products was found to be 3.5. This result can be compared with ratios obtained by Mitsch and Rodgers wherein 2,3dimethyl-2-butene was found to be 3.71 times as reactive as 2-methyl-2-butene and 13.1 times as reactive as isobutylene in the CF, cyclopropanation reaction derived from the gas-phase photolysis of difluorodiazirine at 36 0c.15

(1)Dolbier, W. R., Jr.; Burkholder, C. R. Tetrahedron Lett. 1988,29, 6749. (2) Dolbier, W. R., Jr.; Burkholder, C. R. J. Org. Chem. 1990,31,589. (3) Burton, D. J.; Hahnfeld, J. L.Fluorine Chemistry Reuiews; Tarrant, P., Ed.; Marcel1 Dekker, Inc.: New York, 1977; Vol. 8, pp 153-179. (4) Dolbier, W. R., Jr. Acc. Chem. Res. 1981, 14, 195. (5) Seyferth, D.; Hopper, S. P. J . Org. Chem. 1972, 37, 4070. (6) Burton, D. J.; Naae, D. G. J. Am. Chem. SOC.1973, 95, 8467. (7) Mahler, W.; Resnick, P. R. J. Fluorine Chem. 1973,3,451. See also ref 3. (8) Simmons, H. E.; Smith, R. D. J. Am. Chem. SOC.1958,BO, 5323. (9) Wheaton, G. A,; Burton D. J. J. Fluorine Chem. 1977, 9, 25. (10) Glemser, 0. 2.Naturforsch. 1981, 36b, 1375. (11) Kamel, M. Chem. Ber. 1976, 109, 2351. (12) Dolbier, W. R., Jr.; Keaffaber, J. J.; Burkholder, C. R.; Pradhan, J., unpublished results. (13) Seyferth, D.; Dertouzos, H. Suzuki, R.; Mui, J. Y.-P. J. Org. Chem. 1967,32, 2980. (14) Moss,R. A. Carbenes; Jones, M., Moss, R. A., Eds.; John Wiley and Sons: New York, 1973; Vol. 1, pp 153-304.

38.4%

58.3%

3.3%

A number of alternative solvents were tried for the reaction with a-methylstyrene, with much poorer yields being observed in all cases: E t 2 0 (9%), CH,CN (3%), DMF ( 9 % ) , and dioxane (traces). 19FNMR analyses of the reaction mixtures indicated that CF,ZnBr (4 = -42.1 ppm) and (CF,),Zn (4 = -42.5 ppm) were formed in competition with the reactive carbenoid ~ p e c i e s . ' ~Burton has reported such transformations from CF2Br,-derived organometallics before.ls Under the reaction conditions, these species were not reversibly formed, and they were not reactive in the presence of alkenes. If the CF,ZnBr/(CF,),Zn reagent was formed without alkene present, alkene added, and then the reagent decomposed by the addition of TiC14, one obtained difluorocyclopropane products with a similar reactivity pattern but with diminished yields: TME (67%), a-methylstyrene (32%), 2-ethyl-1-butene (traces 0nly).'~9~'' Thus, the CF2Br2/Zn/THF reagent has been demonstrated to offer significant advantages as a source of difluorocarbene. The good yields and simplicity of procedure should make this the method of choice for most difluorocyclopropane preparations where relatively reactive alkene precursors can be used. Experimental Section General Experimental Procedure. A 100-mL, three-necked flask was equipped with a magnetic stirrer, a thermometer, a rubber septum with an N2 inlet needle, and an addition funnel with an outlet stopcock. (In the case of volatile alkene substrates, a dry ice condenser is also needed). After flushing with N2, 10 mL of T H F , 22.8 mmol of activated Zn, 7.6 mmol alkene, and a small crystal of I2 were added. After the reaction vessel was placed in a water bath, 22.8 mmol of CFzBrzin 10-15 m L of THF was added over a period of 1.5-2 h. T h e mixture was then stirred overnight. All Zn was consumed. An internal standard (hexafluorobenzene) was added directly to the mixture, and analysis (15) Mitach, R. A.; Rodgers, A. S. Int. J . Chem. Kinet. 1969, I , 439. (16) Jefford, C. W.; Mareda, J.; Gehret, J. C. E.; Kabengele, N.; Graham, w . D.; Burger, U. J. Am. Chem. SOC.1976,98, 2585. (17) When I, is added, only the peak at @ = -42.1 ppm disappears with concomitant formation of CFJ ($I = -7.0 ppm). (18) Wiemers, D. M.; Burton, D. J. J . Am. Chem. SOC. 1986,108,832. (19) To a mixture of 15.2 mmol of preprepared reagent in THF were added 1.52 mmol of alkene and then 7.6 mmol of TiCl, at -20 OC. (20) CF3ZnI was first prepared by cocondensation of Zn atoms with CF31on a liquid N2 surface: Klabunde, K. J.; Key, M. S.; Low, J. Y. F. J . Am. Chem. SOC.1972, 94, 999.

5422 J. Org. Chem., Vol. 55, No. 19, 1990 and determination of yield of product were done by 19FNMR spectroscopy. 6,6-Difluoro-l-phenylbicyclo[3.1.0]hexane. A 250-mL, three-necked, round-bottom flask was equipped with an N, inlet, a rubber septum, and a pressure-equalizing addition funnel with a nitrogen outlet. The system was flushed with Nz, and the apparatus was flame-dried. A stirring bar was added to the flask. To the flask were added 50 mL of dry THF, 7.45 g (0.114 mol) of activated zinc dust, a small crystal of iodine, and 5.48 g (0.0380 mol) of l-phenylcyclopentene.21 To the stirred mixture was added a solution of 23.92 g (0.114 mol) of dibromodifluoromethane in 75 mL of anhydrous T H F over a period of 3.5 h. The reaction was slightly exothermic. The zinc dust dissolved t o give a clear, pale amber solution, which was stirred a t ambient temperature overnight (20.5 h). T o the reaction mixture was added 100 mg (0.5375 mmol) of hexafluorobenzene as internal standard, and the 19FNMR spectrum was taken. Integration of the fluorine spectrum indicated the yield of the product to be 84%. The reaction mixture was poured into 200 mL of 10% aqueous HCl containing 50 mL of crushed ice. The mixture was extracted three times with 50-mL portions of CH2Cl2 The combined organic extracts were washed with 50 mL of 10% aqueous NaHC03 and dried over anhydrous Na2S04. The solution was concentrated by rotary evaporation at reduced pressure to give a clear, colorless liquid. Purification by fractional distillation a t reduced pressure with a 15-cm Vigreux column gave 2.36 g (32%) of clear, colorless liquid product, bp 75 OC/l.O mm. Analysis by GC (10 f t by 0.125 in. 20% QF-1 a t 150 "C): IR (film) 3031, 2941, 2868, 1604 (w), (21)Garbisch, E.W., Jr. J. Org. Chem. 1961,26,4165.

Additions a n d Corrections 1500, 1452, 1433 (s), 1304, 1253, 1201 (s), 1149, 1119, 1060, 995 cm-'; 'H NMR (CDCl,, 300 MHz) 6 7.22-7.34 (m, 5 H), 2.46 (m, 1 H), 2.06-2.20 (m, 4 H), 1.7-1.9 ppm (m, 2 H); 19FNMR (CDC13, 282 MHz) 6 -127.1 (dm, J F F = 154.6 Hz, 1 F) and -141.6 ppm (dm, J F F = 154.6 Hz, 1 F); 13C NMR (CDC13, 75 MHz) 6 136.9 (t,J C F = 2.4 Hz, quat), 128.3 (s,CH), 128.2 (d, JCF = 1.7 Hz, CH), 127.0 (s, CH), 116.5 (dd, J C F = 280.2 and 306.4 Hz, CFZ), 42.9 (dd, J C F = 8.6 and 12.5 Hz, quat), 34.3 (d, J c F = 1.6 Hz, CHJ, 33.5 = (dd, J C F = 9.3 and 11.6 Hz, CH) 26.6 (9, CHZ), 24.1 (dd, JCF 1.4 and 10.2 Hz, CH,); HRMS gave M+ = 194.09011 f O.OOO6 (3.2 ppm), dev = -0.0006 (3.1 ppm); MS 194 (loo), 143 (38), 129 (33), 115 (76), 91 (35), 77 (35), 51 (34).

Competition Experiment between a-Methylstyrene and 2,3-Dimethyl-2-butene. T o a similarly equipped, lOO-mL, round-bottom flask were added 2.5 mmol of zinc (165 mg), T H F (20 mL), and 25 mmol each of olefins (2.96 g of a-methylstyrene and 2.10 g of 2,3-dimethyl-2-butene). The flask was placed in a water bath, and then a solution of 3.75 mmol of dibromodifluoromethane (787 mg) in THF (5 mL) was added during a period of 25 min. The reaction was not exothermic. The mixture was stirred overnight. Hexafluorobenzene (50 mg) was added to the mixture, and the products were analyzed by 19F NMR spectroscopy for l,l-difluoro-2,2,3,3-tetramethylcyclopropane (@-148.6 ppm (s)) and for 1,l-difluoro-2-methyl-2-phenylcyclopropane (6 -132.8 (dd, J F F = 150 Hz, J F H = 13 Hz), -137.8 ppm (dd, JFF = 150 Hz, JFH = 1 2 Hz)). The yields of the products were 51.3% and 14.5%, respectively, with a ratio of 3.5.

Acknowledgment. The support of this research in part b y the N a t i o n a l Science F o u n d a t i o n is gratefully acknowledged.

Additions and Corrections Vol. 55. 1990

Peter J. Garratt* and Andrew Tsotinis. Preparation and Reactions of Some (Trimethylsily1)cyclopropenes.Synthesis of In-Out Tricyclic [n.3.2.@e4]Compounds, Potential Precursors to Cyclopropaparacyclophanes. Page 84, column 2. The statement that the authors cited in ref 5 (Dent, B. R.; Halton, B.; Smith, A. M. F. Aust. J. Chem. 1986,39,1621) had prepared compound 5b from compound 4 is incorrect. These workers prepared 5b from compound 15,as we did. We thank Professor Halton for bringing this error to our attention.

Ernest L. Eliel* and Xu-Chang He. Highly Stereoselective Syntheses Involving N-Alkyl-4,4,7cu-trimethyl-trons-octahydro1,3-benzoxazine Intermediates. 2. Page 2115, column 2, Scheme IV: 10% P d / C should replace 1% Pd/C.

Page 2117, column 1, last line: 22.2 should replace 2.22. Page 2119, column 1, line 39: 2 mL should replace 2 mg.

Osmo E. 0. Hormi,* Carita Peltonen, and Laila Heikkila. 2-Aryl-4-quinolones and Fused Quinolines from 6-Chloroarylidenemalonates and Related Chloro Esters. Page 2513, structures IIb, IIc, 111, and IVb should be drawn as shown below. EtOOC

COOEt