Advanced Characterization Techniques for Evaluating Porosity

Micrographs were converted to an 8 bit format and uploaded to ImageJ, and the micrograph scale bar was traced with the line tool to calibrate the imag...
2 downloads 0 Views 2MB Size
Subscriber access provided by University of Sussex Library

Article

Advanced Characterization Techniques for Evaluating Porosity, Nanopore Tortuosity, and Electrical Connectivity at the Single Nanoparticle Level Matthew William Glasscott, Andrew David Pendergast, Moinul Choudhury, and Jeffrey E. Dick ACS Appl. Nano Mater., Just Accepted Manuscript • DOI: 10.1021/acsanm.8b02051 • Publication Date (Web): 28 Dec 2018 Downloaded from http://pubs.acs.org on January 2, 2019

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 39 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Nano Materials

Advanced Characterization Techniques for Evaluating Porosity, Nanopore Tortuosity, and Electrical Connectivity at the Single Nanoparticle Level Matthew W. Glasscott§, Andrew D. Pendergast§, Moinul H. Choudhury, and Jeffrey E. Dick* Department of Chemistry, The University of North Carolina at Chapel Hill, Chapel Hill, NC 27599 §These

authors contributed equally to this work

*To whom correspondence should be addressed: [email protected] 1. Abstract: We demonstrate quantification of porosity, nanopore tortuosity, and electrical connectivity at the single nanoparticle (NP) level for NPs synthesized by droplet-mediated electrodeposition. Focused Ion Beam-nanoSlice Tomography (FIB-nST) was used to slice NPs with ca. 10 nm slice resolution followed by imaging using Scanning Electron Microscopy (SEM), allowing measurement of these parameters on NPs not amenable to Transmission Electron Microscopy (TEM). Slices were reconstructed in 3D and revealed pores with an average size of 3 ± 2 nm and relative nanopore tortuosity of 46.8 ± 24.5. We also demonstrate a new technique to evaluate electrical connectivity at the single NP level by taking advantage of material-selective electrodeposition. The kinetics of Cu electrodeposition differ significantly on Pt compared to carbon, implying copper can be selectively electrodeposited onto Pt NPs adsorbed onto a carbon support. Following the copper electrodeposition step, NP connectivity was determined by the presence of copper on Pt, as studied by Energy-dispersive X-ray Spectroscopy (EDX) and SEM. We demonstrate that NPs synthesized by electrodeposition have >97% connectivity with underlying highly oriented pyrolytic graphite (HOPG) or amorphous carbon electrodes. The same method was employed to study connectivity of citrate-capped Pt NPs (diameter of 70 nm) on HOPG and amorphous graphite adsorbed by drop-casting.

1 ACS Paragon Plus Environment

ACS Applied Nano Materials 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 39

Surprisingly,