Ag Electrode Enables High-Efficiency Orga - ACS Publications

Apr 2, 2018 - large metal grid coverage ratio electrode would lead to undesirable optical loss. Here, we develop a strategy to balance PEDOT:PSS ...
2 downloads 0 Views 1MB Size
Subscriber access provided by - Access paid by the | UCSB Libraries

Organic Electronic Devices x

Buried MoO/Ag Electrode Enables High-Efficiency OrganicSilicon Heterojunction Solar Cells with High Fill Factor Zhouhui Xia, Peng Gao, Teng Sun, Haihua Wu, Yeshu Tan, Tao Song, Shuit-Tong Lee, and Baoquan Sun ACS Appl. Mater. Interfaces, Just Accepted Manuscript • DOI: 10.1021/acsami.8b02403 • Publication Date (Web): 02 Apr 2018 Downloaded from http://pubs.acs.org on April 2, 2018

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 26 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

Buried MoOx/Ag Electrode Enables High-Efficiency Organic-Silicon Heterojunction Solar Cells with High Fill Factor Zhouhui Xia, Peng Gao, Teng Sun, Haihua Wu, Yeshu Tan, Tao Song, Shuit-Tong Lee and Baoquan Sun * Jiangsu Key Laboratory for Carbon-Based Functional Materials and Devices, Institute of Functional Nano & Soft Materials (FUNSOM), Soochow University, Suzhou 215123, China KEYWORDS: Anisotropic conductivity; Heterojunction solar cells; Grid design; Optical loss; Tetraethyl orthosilicate

ABSTRACT

Silicon (Si)/organic heterojunction solar cells based on poly (3, 4-ethylenedioxythiophene): poly (styrenesulfonate) (PEDOT:PSS) and n-type Si have attracted wide interests because they promise cost-effective and high-efficiency. However, the limited conductivity of PEDOT:PSS leads to an inefficient hole transport efficiency for the heterojunction device. Therefore, a high dense top-contact metal grid electrode is required to assure the efficient charge collection efficiency. Unfortunately, the large metal grid coverage ratio electrode would lead to undesirable

ACS Paragon Plus Environment

1

ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 26

optical loss. Here, we develop a strategy to balance PEDOT:PSS conductivity and grid optical transmittance via a buried molybdenum oxide/silver grid electrode. In addition, grid electrode coverage ratio is optimized to reduce its light shading effect. The buried electrode dramatically reduces the device series resistance, which leads to a higher fill factor (FF). With the optimized buried electrode, a record FF of 80% is achieved for a flat Si/PEDOT:PSS heterojunction devices. With further enhancement adhesion between PEDOT:PSS film and Si substrate by a chemical cross-linkable silance, a power conversion efficiency (PCE) of 16.3% for organic/textured Si heterojunction devices is achieved. Our results provide a path to overcome the inferior organic semiconductor property to enhance organic-Si heterojunction solar cell.

ACS Paragon Plus Environment

2

Page 3 of 26 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

1. INTRODUCTION Organic-silicon (Si) heterojunction solar cells have achieved an impressive power conversion efficiency (PCE) by combining a conducting polymer of poly(3,4-ethylenedioxy-thiophene):poly (styrenesulfonate) (PEDOT:PSS) with crystal n-type Si.1-4 In PEDOT:PSS/Si heterojunction solar cells, incident photons are harvested by Si to generate electron-hole pairs instead of organics. An inversion layer is built in Si when PEDOT:PSS layer is deposited on it. Under electrical field generated in the inversion region of Si, photo-generated charges are swept toward to the corresponding electrodes.5 Here, all the devices are constructed by a simple structure at a relatively low temperature (