3-D PRINTING
Aluminum printed without cracks
CR E DI T: B RYA N F E RGU S O N
Nanoparticle additives make it possible to 3-D print alloys with useful mechanical properties Three-dimensional printing has become a popular method for making objects with complex geometries. But use of metal alloys with the technique, which could produce components for aerospace and automotive applications, has lagged. Of the 5,500 alloys in industrial use today, only about 10 can be printed. That’s because metal alloys are typically 3-D printed by rastering a laser across a bed of metal alloy powder to fuse it layer by layer. The way these alloys crystallize as they cool usually results in many little cracks, and therefore poor mechanical properties, in the printed part. By adding just 1% of zirconium hydride nanoparticles to high-strength aluminum alloy powder, researchers at HRL Laboratories and the University of California, Santa Barbara, managed to eliminate these small cracks, creating superior 3-D-print-
ed aluminum alloys (Nature 2017, DOI: 10.1038/nature23894). The technique could potentially be used on many alloys, dramatically expanding the number of metals that are compatible with the manufacturing process. “Our approach was to change the way these materials solidify,” explains J. Hunter Martin, who led the research team. The nanoparticles have just the right geometry to act as seed crystals throughout the molten alloy, providing a multitude of tiny nucleation sites for the alloy to crystallize around. “The approach used here is an elegant and simple way to enable 3-D printing of aluminum alloys, which are important for many applications but have been difficult to print until now,” comments Michael Dickey, an expert in liquid metal
An aluminum alloy powder mixed with nanoparticles is ready for 3-D printing. alloys at North Carolina State University. Martin says that the nanoparticles don’t increase the materials’ costs by a substantial margin and that they’re easy to incorporate into the alloy powders using HRL’s proprietary process. His team is working on scaling up the process to 3-D print hundreds of kilograms of metal alloys at a time. Even so, Martin says, there are many hurdles to overcome before the technique is used commercially simply because the process and the materials are new. Once widely adopted, however, 3-D-printed alloys could dramatically change how metal parts are made, Martin notes. “The vision is that you’d have full geometric freedom to design any component you want.”—BETHANY HALFORD
CHEMICAL EXPERTISE DEDICATED TO YOUR SUCCESS
Protecting Life’s Elements
2 1
ACTIVE PHARMACEUTICAL INGREDIENTS PORTFOLIO OF 200 COMMERCIAL APIs FERMENTATION PRODUCTS CORTICOSTEROIDS & HORMONES OPIATES & OPIOIDS PROSTAGLANDINS SYNTHESIS (SMALL MOLECULE APIs)
2 Sponsored by the Board of Trustees Group Insurance Plans for ACS Members Your Colleagues Working For You!
*Plans underwritten by New York Life Insurance Company, 51 Madison Avenue, New York, NY 10010, under Policy Form GMR. Brokered and administered by Pearl Insurance, 1200 E. Glen Ave., Peoria Heights, IL 61616.
California Insurance License #0F76076, AR# 1322
CUSTOM SYNTHESIS SMALL MOLECULES MICROBIAL FERMENTATION & DOWNSTREAM PROCESSING PROTEIN EXTRACTION & PURIFICATION PARTICLE DESIGN (SPRAY DRYING, MICRONIZATION) ALL SITES APPROVED BY MAJOR REGULATORY AUTHORITIES (FDA, EMEA, PMDA)
COMPLETE PORFOLIO OF QUALITY AND REGULATORY SUPPORT SERVICES 172079-ACS-MIP-MAG-PAD
SEPTEMBER 25, 2017 | CEN.ACS.ORG | C&EN
5
