Ammonium Phosphate, Dibasic - ACS Reagent Chemicals (ACS

A; Accounts of Chemical Research · ACS Applied Bio Materials - New in .... 7.7–8.1. Maximum Allowable; Insoluble matter. 0.005%. Chloride (Cl). 0.00...
2 downloads 0 Views 82KB Size
Monograph pubs.acs.org/doi/book/10.1021/acsreagents

Ammonium Phosphate, Dibasic (Diammonium Hydrogen Phosphate) Part 4, Monographs for Reagent Chemicals: General Descriptions, Specifications, and Tests eISBN: 9780841230460 Tom Tyner Chair, ACS Committee on Analytical Reagents James Francis Secretary, ACS Committee on Analytical Reagents

ABSTRACT This monograph for Ammonium Phosphate, Dibasic provides, in addition to common physical constants, a general description including typical appearance, applications, change in state (approximate), and aqueous solubility. The monograph also details the following specifications and corresponding tests for verifying that a substance meets ACS Reagent Grade specifications including: Assay, pH of a 5% Solution at 25.0 °C, Insoluble Matter, Chloride, Nitrate, Sulfate, Heavy Metals, Iron, Calcium, Magnesium, Potassium, and Sodium.

(NH4)2HPO4

Formula Wt 132.06

CAS No. 7783-28-0

GENERAL DESCRIPTION Typical appearance . . . . . . . . Applications . . . . . . . . . . . . . Change in state (approximate) . Aqueous solubility . . . . . . . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

colorless or white solid buffer solutions melting point, 155 °C, decomposes 1 g in 1.7 mL at about 25 °C

SPECIFICATIONS Assay . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≥98.0% (NH4)2HPO4 pH of a 5% solution at 25.0 °C . . . . . . . . . . . . 7.7–8.1 Maximum Allowable Insoluble matter . . . . . . . . . . . . . . . . . . . . . 0.005% Chloride (Cl) . . . . . . . . . . . . . . . . . . . . . . . 0.001% Nitrate (NO3) . . . . . . . . . . . . . . . . . . . . . . . 0.003% Sulfate (SO4) . . . . . . . . . . . . . . . . . . . . . . . 0.01% Heavy metals (as Pb) . . . . . . . . . . . . . . . . . . 0.001% Iron (Fe) . . . . . . . . . . . . . . . . . . . . . . . . . . 0.001% Calcium (Ca) . . . . . . . . . . . . . . . . . . . . . . . 0.001% Magnesium (Mg) . . . . . . . . . . . . . . . . . . . . . 0.0005%

© 2017 American Chemical Society

A

DOI:10.1021/acsreagents.4032 ACS Reagent Chemicals, Part 4

ACS Reagent Chemicals

Monograph

pubs.acs.org/doi/book/10.1021/acsreagents

Potassium (K) . . . . . . . . . . . . . . . . . . . . . . . 0.005% Sodium (Na) . . . . . . . . . . . . . . . . . . . . . . . . 0.005%

TESTS Assay (By acid–base titration). Weigh accurately about 0.5 g, and dissolve in 50 mL of water. Titrate with 0.1 N hydrochloric acid to the potentiometric end point. One milliliter of 0.1 N hydrochloric acid corresponds to 0.01321 g of (NH4)2HPO4.

pH of a 5% Solution at 25.0 °C [Part 2: Direct Electrometric Methods; pH Potentiometry; pH Range; Procedure for pH of a 5% Solution at 25.0 °C].

Insoluble Matter [Part 2: Gravimetric Methods; Insoluble Matter]. Use 20.0 g dissolved in 200 mL of water.

Chloride [Part 2: Colorimetry and Turbidimetry; Chloride]. Use 1.0 g of sample and 3 mL of nitric acid.

Nitrate [Part 2: Colorimetry and Turbidimetry; Nitrate; Procedure for Nitrate, Method 1 (Brucine Sulfate)]. For sample solution A, use 0.50 g. For control solution B, use 0.50 g and 1.5 mL of nitrate ion (NO3) standard solution.

Sulfate Dissolve 1.0 g in 15 mL of water, and add 4.0 mL of 10% hydrochloric acid (solution approximately pH 2). Filter through a washed filter paper, and add 10 mL of water through the same filter paper. For the control, add 0.10 mg of sulfate ion (SO4) in 20 mL of water, and add 1.0 mL of (1:19) hydrochloric acid. Dilute both to 35 mL with water, add 5.0 mL of 40% barium chloride reagent solution, and mix. Observe turbidity after 10 min. Sample solution turbidity should not exceed that of the control solution.

Heavy Metals [Part 2: Colorimetry and Turbidimetry; Heavy Metals (as Lead); Procedure for Heavy Metals, Method 1]. Dissolve 4.0 g in 10 mL of water, add 15 mL of 2 N hydrochloric acid, and dilute with water to 32 mL. Use 24 mL to prepare the sample solution, and use the remaining 8.0 mL to prepare the control solution.

Iron [Part 2: Colorimetry and Turbidimetry; Iron; Procedure for Iron, Method 2 (Hydroxylamine and 1,10-Phenanthroline)]. Use 1.0 g.

© 2017 American Chemical Society

B

DOI:10.1021/acsreagents.4032 ACS Reagent Chemicals, Part 4

ACS Reagent Chemicals

Monograph

pubs.acs.org/doi/book/10.1021/acsreagents

Calcium, Magnesium, Potassium, and Sodium (By flame AAS, [Part 2: Trace and Ultratrace Elemental Analysis; Atomic Absorption Spectroscopy; Analysis; Procedure for Flame AAS]).

For the Determination of Calcium, Magnesium, Potassium, and Sodium

S a m p l e S t o c k S o l u t i o n . Dissolve 20.0 g of sample in 60 mL of water, add 20 mL of nitric acid (1:1), transfer to a 100 mL volumetric flask, and mix (1 mL = 0.20 g).

For the Determination of Calcium, Magnesium, Potassium, and Sodium

Element

Wavelength (nm)

Sample Wt (g)

Standard Added (mg)

Flame Type*

Background Correction

Ca

422.7

4.0

0.02; 0.04

N/A

No

Mg

285.2

4.0

0.01; 0.02

A/A

Yes

K

766.5

1.0

0.05; 0.10

A/A

No

Na

589.0

0.10

0.005; 0.01

A/A

No

*A/A is air/acetylene; N/A is nitrous oxide/acetylene.

© 2017 American Chemical Society

C

DOI:10.1021/acsreagents.4032 ACS Reagent Chemicals, Part 4