An Inexpensive Sample Cell for Laser Spectrophotometry ... Each side of the cell is assembled with the window sandwiched between two Teflon washers an...
corrosiveness of the material under study. By using a small bench lathe equipped with a six-jawed chuck, the tube fitting is modified to hold the windows so as.
Expt. 24. ,, . . -(.hNCO I)C Vdtmeters Model 8248fi-1,O-3v dc. King's College. Theodore L. Miller. Wilkes-Barre, Pennsylvania I8711. Joseph DiPsolantonio I1.
Alexander and StelTel.1 A filtering crucible with a porous disc bottom (also used ... 0 54. 0.52. 1.05. ^Source for E° values:Latimer, E. M.t "The Oxidation States of ...
seals of platinum to pyrex. The writer ... form of a ribbon 6 mm. wide by 0.7 X 10-3 ... beyond the seal tomake contact with mercury in the side tube,which could be ...
A simple sample holder that provides a rigorous inert gas blanketing of air-sensitive samples without the need for elaborate inert atmosphere enclosures on the ...
Thomas J. Bruno. Thermophysics Division, National Institute of Standards and Technology, Boulder, CO 80303. In many synthetic and analytical procedures, it is ...
Thermophysics Division, National institute of Standards and Technology, Boulder, CO 80303 .... ing about 1- 2 h in a rudimentary machine shop, and mod-.
Oct 8, 2010 - for the Pulsed Laser in the Experiment âLaser ... Department of Chemistry, University of Portland, Portland, Oregon 97203, United States.
Oct 8, 2010 - for the Pulsed Laser in the Experiment âLaser. Measurement of the Speed of Sound in Gasesâ. Mark G. Epstein, Matthew W. Laszlo, and Steven ...
An Inexpensive Sample Cell for Laser Spectrophotometry Commerciallv available euvets for laser lieht scatterine and transmission studies are exoensive and often not adaotable ,~ for usr with ipwislircd r e r a n h rquipnwnt.'l hedrlicnfr nnrurr cdm
