Application of the Attainable Region Concept to the Oxidative

Distillation Sequences for Four-Component. Mixtures. Juan Luis Blancarte-Palacios, Marıa. Nancy Bautista-Valdés, Salvador Hernández, Vicente. Rico-Ram...
0 downloads 0 Views 59KB Size
Ind. Eng. Chem. Res. 2004, 43, 7207-7208

ADDITIONS AND CORRECTIONS Volume 42, Number 21 Energy-Efficient Designs of Thermally Coupled Distillation Sequences for Four-Component Mixtures. Juan Luis Blancarte-Palacios, Marı´a Nancy Bautista-Valde´s, Salvador Herna´ndez, Vicente Rico-Ramı´rez, and Arturo Jime´nez* Page 5163. In Table 3, the temperature is in °F instead of °C. The results and conclusions do not depend on this typographical error. IE0491387 10.1021/ie0491387 Published on Web 09/25/2004

7207

7208

Ind. Eng. Chem. Res. 2004, 43, 7208

Volume 43, Number 8 Application of the Attainable Region Concept to the Oxidative Dehydrogenation of 1-Butene in Inert Porous Membrane Reactors. David Milne, David Glasser, Diane Hildebrandt,* and Brendon Hausberger Page 1829. The title of Figure 4 should read: Residence times for butadiene at oxygen partial pressures of 15, 25, 45, 65, and 85 kPa in a FBR. Page 1829. In the second paragraph, 0.88 should be replaced by 0.87, and “low value of butene (less than 0.003)” should be replaced by “low value of butene of 0.007”. Page 1829. In the third paragraph, the values 0.88 and 248 should be replaced by 0.87 and 147. Page 1829. In the fourth paragraph, the range of partial pressures 55-85 kPa should be replaced by 8540 kPa. Page 1829. In the fifth paragraph, the partial pressures 40 and 55 kPa should be replaced by 35 and 15 kPa. Also, replace 11 by 10. Page 1829. In the sixth paragraph, 40 kPa should be replaced by 15 kPa. Page 1829. Figures 7-9 should be replaced by the corresponding figures herein. Page 1830. In the first paragraph, 0-300 should be replaced by 0-200. Also, 340 should be replaced by 190. Page 1830. In the seventh paragraph, 5.29 should be replaced by 2.93. Page 1830. In the eighth paragraph, 0.88, 248, and 98% should be replaced by 0.87, 147, and 96%. Page 1830. In the 12th paragraph, 0.88 and 0.003 should be replaced by 0.87 and 0.01. Page 1830. Figure 11 should be replaced by the corresponding figure herein.Page 1831. In the fourth paragraph, 1% should be replaced by 3%. Page 1831. In the sixth paragraph, 0.88, 248, and 98% should be replaced by 0.87, 147, and 96%.

Figure 8. Residence times for butadiene at constant oxygen partial pressures from 85 to 0.25 kPa in an IMR.

Figure 9. Residence times for butene at constant oxygen partial pressures from 85 to 0.25 kPa in an IMR.

Figure 11. Butadiene residence times at a very low oxygen partial pressure and in a very large IMR.

Figure 7. Profiles of butane and butadiene at constant oxygen partial pressures from 85 to 0.25 kPa in an IMR.

IE049408L 10.1021/ie049408l Published on Web 09/17/2004