Assembly and Adsorption Properties of Seven Supramolecular

3 days ago - Compound 5 exhibited great adsorption performance for organic dyes methylene blue, methyl orange, and rhodamine B (RhB) and can be ...
0 downloads 0 Views 5MB Size
This is an open access article published under an ACS AuthorChoice License, which permits copying and redistribution of the article or any adaptations for non-commercial purposes.

Article Cite This: ACS Omega 2019, 4, 8926−8934

http://pubs.acs.org/journal/acsodf

Assembly and Adsorption Properties of Seven Supramolecular Compounds with Heteromacrocycle Imidazolium Yuan-Yuan Li, Fu-Rong Wang, Zi-Yan Li, Zhen-Ning Yan, and Yun-Yin Niu* College of Chemistry and Molecular Engineering, Zhengzhou University, Zhengzhou, Henan 450001, P. R. China

Downloaded by 193.56.65.134 at 16:26:45:456 on May 24, 2019 from https://pubs.acs.org/doi/10.1021/acsomega.9b00669.

S Supporting Information *

ABSTRACT: Seven supramolecular compounds comprising multivalent imidazolium macrocycles and metal halides, {[MC-IM][Ag2I4]}n (1), {[PCIM]2[Ag7I11]}n (2), {[ODC-IM][Ag3I7]} (3), {[ODC-IM][Bi2I10]} (4), {[MDC-IM][Bi2I10]} (5), {[PDC-IM][Bi2I10]} (6), and {[MDC-IM][HgI4]} (7), have been synthesized by solvothermal reactions and structurally characterized by IR spectroscopy, thermogravimetric analysis, and single-crystal X-ray diffraction. Notably, the three tetravalent imidazolium macrocycles were introduced for the first time and the extended anion structures are featured with three-dimensional coordination networks, one-dimensional chains, or zerodimensional oligomers. This new study attempts to not only fill the gap in this supramolecular hybrid area that has been neglected but also enrich the type of imidazolium cyclophane. It is important that good efforts were devoted to study the adsorption properties of supramolecular compounds. Compound 5 exhibited great adsorption performance for organic dyes methylene blue, methyl orange, and rhodamine B (RhB) and can be evaluated as a potential candidate for industrial wastewater treatment.



INTRODUCTION Over the past few decades, much work has been done in developing imidazolium cyclophane complexes and exploring their potential applications. The properties of macrocyclic compounds mainly include host−guest chemistry,1−3 selfassembly,4 selective catalysis,5 and ion channel.6,7 In an earlier study, Thummel’s group prepared a series of 2,2′-bibenzimidazolium salts by N,N′-bridging using dihaloalkanes.8 They found that these salts may be reduced by one or two electrons to the corresponding cation radical or neutral 2,2′bibenzimidazolinylidene. Many studies have shown that the hydrogen in 2-C in the imidazole ring is strongly acidic. Under alkaline conditions, protons can be removed and coordinated with metals to form carbene complexes. More research about this come from Baker’s group.9−15 However, research on the use of imidazolium cyclophanes and metal salts to construct a supramolecular system is rare. We concentrated on the use of the imidazolium cation as the template because it has a positive charge on its own.16−18 Nowadays, organic dyes are closely related to our daily life, such as for the dyeing of silk, cotton, linen, and orlon fibers, as well as in the papermaking industry. Dyes that are electrically neutral, positive, or negative are usually difficult to degrade. Therefore, dyes must be removed before discharge. Recently, metal−organic frameworks (MOFs) have been widely used in the domain of selective adsorption and separation of dyes.19 Most of them contain approximately sized channels. Many applications in degradation of organic dyes by MOF have been explored, but supramolecular compounds are rarely used to absorb or isolate dye molecules.20 © 2019 American Chemical Society

It was rarely reported that imidazolium cyclophanes as the cationic template can be used to synthesize supramolecular compounds with metal halides.21 In this contribution based on two divalent imidazolium macrocycles (MC-IM·Br2 and PCIM·Br2) and three novel tetravalent imidazolium macrocycles: di-orthocyclo{l,4}(1,3)imidazolophanium dibromide (abbreviated as ODC-IM·Br4), di-metacyclo{l,4}(1,3)imidazolophanium dibromide (abbreviated as MDC-IM·Br4), and di-paracyclo{l,4}(1,3)imidazolophanium dibromide (abbreviated as PDC-IM·Br4) (shown in Scheme 1), we prepared seven new inorganic−organic hybrid supramolecules {[MCIM][Ag2I4]}n (1), {[PC-IM]2[Ag7I11]}n (2), {[ODC-IM][Ag3I7]} (3), {[ODC-IM][Bi2I10]} (4), {[MDC-IM][Bi2I10]} (5), {[PDC-IM][Bi2I10]} (6), and {[MDC-IM][HgI4]} (7). They not only enrich the type of imidazole ring but also can be used for dye adsorption research to achieve the purpose of purifying water.



RESULTS AND DISCUSSION Description of Crystal Structures. Crystal Structure of {[MC-IM][Ag2I4]}n (1). The asymmetric unit of 1 consists of an electron-deficient meta-imidazole ring [MC-IM]2+ and an anion [Ag2I4]2− (Figure 1a). There are two crystallographically independent Ag (I) atoms, both of which are four-coordinated in similar coordination environments. The anion [Ag2I4]n2− is partially polymerized into a three-dimensional (3D) iodoarReceived: March 10, 2019 Accepted: May 13, 2019 Published: May 22, 2019 8926

DOI: 10.1021/acsomega.9b00669 ACS Omega 2019, 4, 8926−8934

ACS Omega

Article

dimensional (1D) iodoargentate chain and cation. Seven Ag atoms have different coordination environments, which are coordinated with four I atoms; there exists a metal−metal bond between Ag2−Ag3 and Ag5−Ag6. A schematic of [Ag4I6]n2n− and [Ag3I5]n2n− anionic polymerization is shown in Figure 2b, where [Ag4I6]2− forms the cubic structure with the smallest building unit hexahedron and [Ag3I5]2− forms the minimum structure unit of tetrahedron. The asymmetric unit is connected by Ag−Ag bonds (the Ag−Ag bond length of 2.942−3.283 Å is less than twice the van der Waals radius of Ag 1.72 Å, which indicates the presence of Ag−Ag metal bonds). By this connection, two different anion polymeric chains are formed. Figure 2c shows the stacking of heterocyclic cation [PC-IM]2+ in the b-axis direction, and the anion chains [Ag4I6]n2n− and [Ag3I5]n2n− are surrounded and interacted with cations by electrostatic interaction. Viewed along the bdirection, this iodoargentate chain looks like a beautiful Chinese knot in Figure 2c. Crystal Structure of [ODC-IM][Ag3I7] (3). Compound 3 was synthesized by the solvothermal reaction from AgI, KI, and [ODC-IM]4+, at a certain molar ratio. Its asymmetric unit in Figure 3a contains Ag (I) atoms with different coordination environments. Each Ag adopts a four-coordination mode. Ag1 is not only connected to Ag2 and Ag3 through μ2-I but also coordinated with two t-I. Ag3 interacted with Ag2 to form Ag− Ag metal bonds and also coordinated with a t-I and three μ2-I. The Ag−I bond lengths ranged from 2.7310 to 3.1176 Å, and the I−Ag−I bond angles ranged from 55.00 to 131.82°. Figure 3b,c shows the stacked view of compound 3 under different visions. The anion-building unit Ag3I7 is located in the middle of two cationic [ODC-IM]4+ macrocycles interacted via the electrostatic force forming a sandwichlike structure. Crystal Structures of [ODC-IM][Bi2I10] (4), [MDC-IM][Bi2I10] (5), and [PDC-IM][Bi2I10] (6). The structures of compounds 4− 6 are featured by the binuclear iodobismuthates. Their crystal structures are very similar (except for some differences in the stacked patterns), and they are three isomers. Therefore, the structure of compound 4 is taken as an example here for a detailed description. The asymmetric unit of compound 4 contains 1/2 [ODC-IM]4+, a positive Bi atom, and five negative I atoms (Figure 4a). As is shown in Figure 4b, in isomorphic compounds 4−6, Bi(1) and Bi(2) atoms are bonded to four t-I and μ2-I (the Bi atoms are coplanar with μ2I, and the plane is named β-plane). It can be seen from Figure 4c that the inorganic moiety [Bi2I10]4− is in the middle of the two cationic [ODC-IM]4+ macrocycles. The anion and cation form a sandwichlike structure and construct a unit model (abstracted in Figure 4d) by electrostatic force and weak C− H···I bonds (where the bond length of C−H···I in [ODCIM]4+ is around 3.2 Å, the bond length of C−H···I in [MDCIM]4+ is around 3.01 Å, and C−H···I of [PDC-IM]4+ is about 3.03 Å). Figure 4e shows a stacked view of compounds 4−6. It can be seen from the stacking diagram that induced by different macrocyclic cations the [Bi2I10]4− anions are arranged along a different direction. Taking the β-plane as a reference, there existed an angle between the β-plane and the [ODCIM]4+ macrocyclic plane in compound 4, while it is substantially parallel to the macrocyclic cation plane of [MDC-IM]4+ and [PDC-IM]4+ in compounds 5 and 6, respectively. The phenomenon is probably caused by the presence of different C−H···I bonds. Crystal Structure of {[MDC-IM][Hg2I8]} (7). As shown in Figure 5a, its asymmetric unit consists of two parts of 1/2

Scheme 1. Bisimidazolium and Tetraimidazolium Macrocycle Cations Used in This Paper

Figure 1. (a) Asymmetric unit of compound 1; (b) anion structure diagram of compound 1; (c) stacked diagram of compound 1 in the caxis direction; and (d) stacked diagram of compound 1 in the a-axis direction.

gentate network structure (as shown in Figure 1b). It can be seen from the compound 1 packing diagram in Figure 1c that the imidazole ring is interspersed in the 3D [Ag2I4]n2n− anionic tunnel by electrostatic force. Figure 1d shows the crystalstacked diagram of compound 1 viewed along the a-axis direction (like bowls tied with a straw). Crystal Structure of {[PC-IM]2[Ag7I11]}n (2). Figure 2a shows that the characteristic feature of compound 2 is the one8927

DOI: 10.1021/acsomega.9b00669 ACS Omega 2019, 4, 8926−8934

ACS Omega

Article

Figure 2. (a) Asymmetric unit of compound 2; (b) anion structure diagram of compound 2; and (c) stacked diagram of compound 2 along the bdirection.

[MDC-IM]4+ and a mononuclear [HgI4]2− anion. In the anion, the Hg atom adopted a tetracoordinate mode bonded to four I atoms. The bond lengths of the Hg−I bond are between 2.7675 (12) and 2.8416 (12) Å. The bond angles of I−Hg−I are between 102.59 (4) and 113.28 (4)°. Figure 5b shows the spatial arrangement between anions and cations, and Figure 5c shows the sandwichlike packing unit. Single-crystal X-ray analysis reveals that compound 1 crystallizes in a monoclinic system with space group P212121, compounds 2 and 7 crystallize in a monoclinic system with space group P21/c, compounds 3−5 crystallize in a monoclinic system with space group P1̅, and compound 6 crystallizes in a monoclinic system with space group P21/c. The anion structures of compounds 1−7 are featured by the 3D iodoargentate network (for 1), 1D iodoargentate chain (for 2), trinuclear iodoargentate (for 3), binuclear iodobismuthates (for 4−6), and mononuclear iodomercute (for 7). The anion and organic cation interacted by electrostatic interaction, van der Waals’ interaction, or hydrogen bond (Figures 1−5). As shown in Figures 1−5, the macrocycle of the cation is larger

and the anion structure of the supramolecule is simpler. On the contrary, macrocycles of the cation are the smaller, supramolecular anion structures, which are easily polymerized.22 Thermal Stability of Compounds 1−7. We studied the thermal stability of compounds 1−7 through the NETZSCH STA 449C synchronous thermal analyzer (Figure S6). The experimental conditions were as follows: N2 gas atmosphere (gas flow rate 30 cm3 min−1), heating rate was 5 K min−1, experimental temperature is from 25 to 800 °C. The weight loss curve of the compounds can be clearly observed from the thermogravimetric analysis chart in Figure S6. The thermal stability of compounds 1 and 2 is similar, and the tendency of weight loss of compounds 3−7 is similar. They are stable below 320 °C. After 320 °C, the weight loss of the sample mainly consists of two stages. When the temperature is 320− 450 °C, it is mainly caused by the decomposition of the cations. After 450 °C, the weight loss of the sample is caused by the decomposition of the inorganic structure. As shown in Figure S6, seven compounds are stable up to the temperature 8928

DOI: 10.1021/acsomega.9b00669 ACS Omega 2019, 4, 8926−8934

ACS Omega

Article

Figure 3. (a) Asymmetric unit of compound 3; (b) anion structure diagram of compound 3 in the b-axis direction; and (c) stacked diagram of compound 3 in the a-axis direction.

of around 300 °C. Therefore, the stabilities of compounds 1−7 are relatively good. Adsorption Properties of Compounds 1−7. To explore the ability that compounds 1−7 purify organic dyes in wastewater, we selected three common dyes, methylene blue (MB), methyl orange (MO), and rhodamine B (RhB), to investigate the adsorption properties of compounds 1−7. The concentrations of MB, MO, and RhB solutions (100 mL volumetric flask) were 1.0 × 10−5, 5.0 × 10−5, and 2.0 × 10−5 mol L−1. Taking the adsorption of MB by compound 1 as an example, the experiment process is as follows: take 20 mL of MB solutions in a dark place and then take about 3 mL of the solution each time to measure its initial absorbance by ultraviolet adsorption spectrum (MB, A0 at 663 nm). Next, 10 mg of compound 1 was added to one of the MB solutions, and the other was a blank control. They were measured during the appropriate time interval. Figures S7−S13 show the adsorption of compounds 1−7 on MB, MO, and RhB and the UV spectra of their respective blank controls. Taking Ct/C0 (Lambert Beer’s law At/A0 = Ct/C0) as the ordinate and the illumination time as the abscissa, the relationships between the Ct/C0 of the adsorption of MB, MO, and RhB and their respective experiments are shown in Figures 6−8 and S14−S17. As is shown in Figures 6−8, compound 5 shows extraordinary adsorption capacity for organic dyes RhB and MB, which is much better than that of some MOFs,23 and the adsorption effect can approach 100%.24 The adsorption effect of compounds 4 and 6 on MO is also relatively good. The adsorption of the MB, MO, and RHB dyes by compounds 1−7 may be caused by the hydrogen bond, the electrostatic force, or the van der Waals force between the solid surface and the

dye. Compounds 4−6 exhibited different adsorption properties for MO and MB, which may be attributed to the different adsorption sites on the different macrocycles. There is a large amount of C−H···I hydrogen bonds between the inorganic anion and the organic cation in compounds 4−6. It can accelerate dye adsorption.20 The content of the leaking Ag+ ion after one cycle of adsorption was measured by inductively coupled plasma mass spectrometry (ICP-MS). The residual organic matter in the solution is digested by nitric acid.24b The content of Ag+ measured by ICP-MS is 4.67 × 10−5 mol L−1. This result indicates that the content of the leaking Ag+ ion after the first cycle of adsorption is rather small and can be neglected. The color changes of the adsorbed dye before and after the adsorption are provided in Figures S7−S13. One of the most important factors affecting the availability of dye adsorption in the industry is its recycling performance. In the second recycling experiment, 4 and 5 could be readily recovered from the catalytic system via centrifugation and deionized water rinsing. Reuse of the catalyst was then investigated (Figure S18). The second adsorption rates of compound 5 for MB decreased by 15%. The second adsorption rates of compounds 4 and 5 for MO decreased by 10 and 4%. They also have an obvious adsorption effect. We explored the reason for the adsorption of MB, MO, and RhB in aqueous solution by compounds 1−7. Taking compound 5 as an example, its specific surface area and pore size distribution were determined by the Brunauer−Emmett− Teller (BET) method. As shown in Figure 9, the N2 adsorption/desorption isotherms obtained from compound 5 conform to adsorption type II, which reflects the typical physical adsorption process. BET data show that the specific 8929

DOI: 10.1021/acsomega.9b00669 ACS Omega 2019, 4, 8926−8934

ACS Omega



Article

CONCLUSIONS In this article, we successfully synthesized seven novel inorganic−organic hybrid supramolecular polymers using an imidazole ring macrocyclic divalent organic cation template, which consist of a three-dimensional structure of compound 1, a one-dimensional structure of compound 2, a trinuclear structure of compound 3, a binuclear structure of compounds 4−6, and a mononuclear structure of compound 7. Three tetravalent cation imidazolium macrocycles that have not been previously reported were successfully introduced. It is found that the metal anions and the cation ligands mutually influence the final extended structures. We have investigated the thermostability and dye adsorption. The result indicated that compounds 4−6 can readily and quickly absorb MO and MB from water. We will continue to explore these supramolecular compounds for solving environmental pollution problems.



EXPERIMENTAL SECTION Materials and Methods. The imidazolium cationic derivative compounds MC-IM·Br2, PC-IM·Br2, ODC-IM·Br4, MDC-IM·Br4, and PDC-IM·Br4 were synthesized according to the reported synthetic method.26−28 MC-IM·Br2 or PC-IM·Br2 was synthesized by mixing and refluxing 1,4-bis(imidazol-1yl)butane (5 mmol) and α,α′-dibromo-o-xylene (or 1,4dibromomethylbenzene, 5 mmol) in acetonitrile for 20 h. After the reaction is completed, the mixture was filtered while hot, to yield a clear yellow filtrate. The solvent was removed from the filtrate under reduced pressure to yield a white solid.26 ODC-IM·Br4 (MDC-IM·Br4 or PDC-IM·Br4) was synthesized by 1,4-bis(imidazol-1-yl)butane (380 mg, 2 mmol) and 1,2-bis(bromomethyl)benzene (1,3-bis(bromomethyl)benzene or 1,4-bis(bromomethyl)benzene) (264 mg, 2 mmol) dissolved in acetonitrile. The latter was slowly added dropwise to a solution of 1,4-bis(imidazol-1-yl)butane under magnetic stirring (with a feeding time of not less than 40 min). The mixture was allowed to reflux for 20 h. After the reaction was completed, the solvent was removed under reduced pressure to yield a white solid.27,28 Other chemicals were of reagent grade and used without further purification. Experimental and instrumental conditions in this article referenced the reported literature.16,27 Compound Synthesis. {[MC-IM][Ag2I4]}n (1). A mixture of MC-IM·Br2 (0.010 g), AgI (0.010 g), and KI was dissolved in 3 mL of CH3CN.21 White rod crystals suitable for X-ray diffraction analysis were obtained in a yield of 6% based on silver ions. Anal. calc. (%) for C18H22Ag2I4N4: N, 5.32%; C, 21.32; H, 2.08; found: N, 5.5%; C, 21.22; H, 2.16; IR(KBr): 3441(w), 3128(m), 3041(m), 2932(s), 1623(m), 1557(m), 1441(m), 1342(s), 1151(w), 815(s), 737(m), 616(s) cm−1. {[PC-IM]2[Ag7I11]}n (2). The preparation method of 2 is similar to that of 1 except that MC-IM·Br2 is replaced with PCIM·Br2. The reaction gives yellow block crystals. After the reaction, the product was washed with anhydrous ethanol. The yield is 7%. Anal. calc. (%) for C36H44Ag7I11N8: N, 4.12%; C, 15.68; H, 1.59; found: N, 4.09%; C, 15.77; H, 1.61; IR(KBr): 3448(w), 3121(m), 3086(m), 2938(s), 2072(s), 1630(s), 1550(m), 1449(m), 1313(s), 1143(w), 871(s), 786(w), 643(m) cm−1. [ODC-IM][Ag3I7] (3). The preparation method of 3 is similar to that of 2 except that PC-IM·Br2 is replaced with ODC-IM· Br4. White rod crystals were prepared, washed, and obtained in a yield of 8.5%. Anal. calc. (%) for C38H47Ag3I7N9: N, 6.51%;

Figure 4. (a) Structural unit diagram of compound 4; (b) anionic βface of compound 4; (c) hydrogen bond diagram (blue dash lines) of compound 4; (d) model diagram of compounds 4−6; and (e) stacked diagram of compounds 4−6.

Figure 5. (a) Asymmetric unit of compound 7; (b) stacked diagram of compound 7; and (c) model diagram of compound 7.

surface area of compound 5 is 8.4264 m2 g−1, the pore diameter is 3.986 nm, and the N2 amount adsorbed is 1.936 cm3 g−1. This result indicated that compound 5 is a mesoporous material and the related process belongs to external surface adsorption.25 8930

DOI: 10.1021/acsomega.9b00669 ACS Omega 2019, 4, 8926−8934

ACS Omega

Article

Figure 6. Photographs are relevant solutions at different times. (a−c) Adsorption of MB solution (a), MO solution (b), and RhB solution (c) with the use of compound 4 and blank experiment.

Figure 7. Photographs are relevant solutions at different times. (a−c) Adsorption of MB solution (a), MO solution (b), and RhB solution (c) with the use of compound 5 and blank experiment. 8931

DOI: 10.1021/acsomega.9b00669 ACS Omega 2019, 4, 8926−8934

ACS Omega

Article

Figure 8. Photographs are relevant solutions at different times. (a−c) Adsorption of MB solution (a), MO solution (b), and RhB solution (c) with the use of compound 6 and blank experiment.

5.12%; C, 18.76; H, 1.83; found: N, 4.92%; C, 18.98; H, 1.93; IR(KBr): 3439(w), 3126(s), 3096(s), 2933(s), 1617(m), 1557(m), 1442(m), 1355(s), 1151(m), 825(s), 733(m), 616(s) cm−1. {[PDC-IM][Bi2I10]} (6). The preparation method of 6 is similar to that of 5 except that PC-IM-Br2 is replaced with ODC-IM·Br4. Red block crystals of compound 6 were obtained with a yield of 7.7%. Anal. calc. (%) for C36H44Bi2I10N8: N, 5.12%; C, 18.76; H, 1.83; found: N, 5.01%; C, 18.92; H, 1.90; IR (KBr): 3440(w), 3094(m), 3057(m), 2944(s), 1613(s), 1552(m), 1436(m), 1349(s), 1146(w), 816(m), 723(m), 608(m) cm−1. {[MDC-IM][HgI4]2} (7). The preparation method of 7 is similar to that of 5 except that BiI3 is replaced with HgI2. Light yellow rod-shaped crystals of compound 7 were obtained with a yield of 5.3%. Anal. calc. (%) for C36H44Hg2I8N8: N, 5.64%; C, 21.67; H, 2.13; found: N, 5.59%; C, 21.55; H, 2.19; IR (KBr): 3440(w), 3127(m), 3092(m), 2939(s), 1609(s), 1558(w), 1437(m), 1361(s), 1150(w), 815(s), 733(s), 638(m) cm−1.

Figure 9. Gas sorption isotherms of N2 adsorption and desorption at 77 K.

C, 24.91; H, 2.65; found: N, 6.81%; C, 24.76; H, 2.55; IR(KBr): 3434(w), 3158(m), 3064(m), 2870(s), 2073(s), 1632(s), 1566(w), 1454(m), 1159(w), 1062(w), 741(m), 521(s) cm−1. {[ODC-IM][Bi2I10]} (4). The preparation method of 4 is similar to that of 3 except that AgI is replaced with BiI3. Red block crystals were washed and obtained in a yield of 9%. Anal. calc. (%) for C36H44Bi2I10N8: N, 5.12%; C, 18.76; H, 1.83; found: N, 4.92%; C, 18.98; H, 1.93; IR(KBr): 3441(w), 3093(m), 3062(m), 2920(s), 1638(s), 1557(m), 1438(m), 1352(s), 1147(m), 828(s), 733(m), 638(m) cm−1. {[MDC-IM][Bi2I10]} (5). The preparation method of 5 is similar to that of 4 except that ODC-IM·Br4 is replaced with MDC-IM. Red block crystals of compound 5 were obtained with a yield of 12%. Anal. calc. (%) for C36H44Bi2I10N8: N,



ASSOCIATED CONTENT

S Supporting Information *

The Supporting Information is available free of charge on the ACS Publications website at DOI: 10.1021/acsomega.9b00669. Important crystallographic data (Tables S1 and S2); simulated powder XRD patterns (Figure S1) for compounds 1−7; after adsorption, powder X-ray diffraction of compounds 1−7 (Figures S2−S4); IR spectra of compounds 1−7 (Figure S5); thermogravi8932

DOI: 10.1021/acsomega.9b00669 ACS Omega 2019, 4, 8926−8934

ACS Omega



Article

(10) Wedlock, L. E.; Barnard, P. J.; Filipovska, A.; Skelton, B. W.; Berners-Price, S. J.; Baker, M. V. Dinuclear Au(I) N-heterocyclic carbene complexes derived from unsymmetrical azolium cyclophane salts: potential probes for live cell imaging applications. Dalton Trans. 2016, 45, 12221−12236. (11) Baker, M. V.; Brown, D. H.; Haque, R. A.; Skelton, B. W.; White, A. H. A new binding geometry for an ortho-xylylene-linked bis(NHC)cyclophane: a ruthenium(II) complex with a chelating (η1NHC)2: η6-arene ligand. Dalton Trans. 2010, 39, 70−72. (12) Baker, M. V.; Brown, D. H.; Simpson, P. V.; Skelton, B. W.; White, A. H. Palladium complexes of o-xylyl-linked alkoxybenzimidazolin-2-ylidenes: interesting structural conformations and application as pre-catalysts. Dalton Trans. 2009, 7294−7307. (13) Baker, M. V.; Brown, D. H.; Haque, R. A.; Simpson, P. V.; Skelton, B. W.; White, A. H.; Williams, C. C. Mercury complexes of N-heterocyclic carbenes derived from imidazolium-linked cyclophanes: synthesis, structure, and reactivity. Organometallics 2009, 28, 3793−3803. (14) Baker, M. V.; Brown, D. H.; Heath, C. H.; Skelton, B. W.; White, A. H.; Williams, C. C. Azolium-Linked Cyclophanes: Effects of Structure, Solvent, and Counteranions on Solution Conformation Behavior. J. Org. Chem. 2008, 73, 9340−9352. (15) Baker, M. V.; Brayshaw, S. K.; Skelton, B. W.; White, A. H.; Williams, C. C. Synthesis and structure of N-heterocyclic carbene complexes of rhodium and iridium derived from an imidazoliumlinked cyclophane. J. Organomet. Chem. 2005, 690, 2312−2322. (16) Du, H. J.; Li, Y. R.; Xu, M. M.; Niu, Y. Y.; Hou, H. W. Studies on crystal structures, optical and electrical properties of viologen cation salts of d10 metal halide anions. J. Mol. Struct. 2017, 1133, 101. (17) (a) Wang, C. H.; Du, H. J.; Lu, Y. B.; Xu, M. M.; Wu, B. L.; Niu, Y. Y.; Hou, H. W. Bis(3,5-lutidine)alkyl Dications and Their Use in the Fabrication of Organic-Inorganic 2D Polypseudorotaxane by Templated Self-Assembly. Cryst. Growth Des. 2016, 16, 2487. (b) Jiang, Z. L.; Li, Y. M.; Wang, M.; Song, B.; Wang, K.; Sun, M. Y.; Liu, D.; Li, X. H.; Yuan, J.; Chen, M. Z.; Guo, Y.; Yang, X. Y.; Zhang, T.; Moorefield, C. N.; Newkome, G. R.; Xu, B. Q.; Li, X. P.; Wang, P. S. Self-assembly of a supramolecular hexagram and a supramolecular pentagram. Nat. Commun. 2017, 8, No. 15476. (18) Yue, Z. C.; Du, H. J.; Niu, Y. Y.; Jin, G. X. An unprecedented ιtype octamolybdate: [TbI1]2[(β-Mo8O26)0.5(ι-Mo8O26)] directed by a new tricationic template. CrystEngComm 2013, 15, 9844. (19) (a) Qin, J. S.; Zhang, S. R.; Du, D. Y.; Shen, P.; Bao, S. J.; Lan, Y. Q.; Su, Z. M. A Microporous Anionic Metal-Organic Framework for Sensing Luminescence of Lanthanide(III) Ions and Selective Absorption of Dyes by Ionic Exchange. Chem. - Eur. J. 2014, 20, 5625−5630. (b) Li, L.; Sun, F. X.; Jia, J. T.; Borjigin, T.; Zhu, G. S. Growth of large single MOF crystals and effective separation of organic dyes. CrystEngComm 2013, 15, 4094. (c) Zhang, J.; Zhu, H. C.; Zhong, R. L.; Wang, L.; Su, Z. M. Promising heterocyclic anchoring groups with superior adsorption stability and improved IPCE for high-efficiency noncarboxyl dye sensitized solar cells: A theoretical study. Org. Electron. 2018, 54, 104−113. (d) Zhou, X.; Liu, D.; Lang, F. F.; Ren, Z. G.; Lang, J. P. Two 2D Zinc(II) Coordination Polymers and Their Orange IVComposites: Preparation, Structures, and Photocurrent Responses. Cryst. Growth Des. 2019, 19, 211−218. (e) Shi, Y. X.; Li, W. X.; Chen, H. H.; Young, D. J.; Zhang, W. H.; Lang, J. P. A crystalline zinc(II) complex showing hollow hexagonal tubular morphology evolution, selective dye absorption and unique response to UV irradiation. Chem. Commun. 2017, 53, 5515−5518. (f) Lang, F. F.; Zhou, X.; Ren, Z. G.; Young, D. J.; Lang, J. P. A Cationic Coordination Polymer and Its Orange II Anion-Exchanged Products: Isolation, Structural Characterization, Photocurrent Responses, and Dielectric Properties. Inorg. Chem. 2017, 56, 12542− 12550. (g) Wu, B.; Zhang, W. H.; Lang, J. P. Site-selective homo- and hetero-metallic doping of a 1D Zn-based coordination polymer to enhance the dimensionality and photocurrent responses. CrystEngComm 2016, 18, 3048−3054. (h) Hu, F. L.; Shi, Y. X.; Chen, H. H.; Lang, J. P. A Zn(II) coordination polymer and its photocycloaddition product: syntheses, structures, selective luminescence sensing of

metric analysis of compounds 1−7 (Figure S6); UV adsorption spectrum curves of compounds 1−7 and blank (Figures S7−S13); the adsorption rates of compounds 1−3 and 7 (Figures S14−S17); and the second adsorption rates (Figure S18) (PDF) CCDC reference numbers: 1554254 for 1, 1584594 for 2, 1898623 for 3, 1890793 for 4, 1890796 for 5, 1890794 for 6, and 1890795 for 7 (CIF)

AUTHOR INFORMATION

Corresponding Author

*E-mail: [email protected]. Tel: +86 371 67767627. ORCID

Yun-Yin Niu: 0000-0002-9113-0438 Author Contributions

The article was written through contributions of all authors, and all authors have given approval to the final version of the article. Notes

The authors declare no competing financial interest.

■ ■

ACKNOWLEDGMENTS Research efforts of Niu’s group are supported by the National Science Foundation of China (No. 21671177). REFERENCES

(1) Cram, D. J.; Cram, J. M. Host-Guest Chemistry: Complexes between organic compounds simulate the substrate selectivity of enzymes. Science 1974, 183, 803−809. (2) Cram, D. J. Cavitands: Organic Hosts with Enforced Cavities. Science 1983, 219, 1177−1183. (3) (a) Zapata, F.; Caballero, A.; White, N. G.; Claridge, T. D. W.; Costa, P. J.; Felix, V.; Beer, P. D. Fluorescent Charge-Assisted Halogen-Bonding Macrocyclic Halo-Imidazolium Receptors for Anion Recognition and Sensing in Aqueous Media. J. Am. Chem. Soc. 2012, 134, 11533−11541. (b) Bruns, C. J.; Liu, H. W.; Francis, M. B. Near-Quantitative Aqueous Synthesis of Rotaxanes via Bioconjugation to Oligopeptides and Proteins. J. Am. Chem. Soc. 2016, 138, 15307−15310. (c) Juríček, M.; Barnes, J. C.; Dale, E. J.; Liu, W. G.; Strutt, N. L.; Bruns, C. J.; Vermeulen, N. A.; Ghooray, K. C.; Sarjeant, A. A.; Stern, C. L.; Botros, Y. Y.; Goddard, W. A.; Stoddart, J. F. Ex2Box: Interdependent Modes of Binding in a TwoNanometer-Long Synthetic Receptor. J. Am. Chem. Soc. 2013, 135, 12736−12746. (4) Chen, M. Z.; Wang, J.; Chakraborty, S.; Liu, D.; Jiang, Z. L.; Liu, Q. Q.; Yan, J. H.; Zhong, G. R.; Newkome; Wang, P. S. Metallosupramolecular 3D assembly of dimetallic Zn4[RuL2]2 and trimetallic Fe2Zn2[RuL2]2. Chem. Commun. 2017, 53, 11087−11090. (5) Mata, J. A.; Hahn, F. E.; Peris, E. Heterometallic complexes, tandem catalysis and catalytic cooperativity. Chem. Sci. 2014, 5, 1723−1732. (6) Montesarchio, D.; Coppola, C.; Boccalon, M.; Tecilla, P. Carbohydrate-based synthetic ion transporters. Carbohydr. Res. 2012, 356, 62−74. (7) Matile, S.; Jentzsch, A. V.; Montenegro, J.; Fin, A. Recent synthetic transport systems. Chem. Soc. Rev. 2011, 40, 2453−2474. (8) (a) Shi, Z. Q.; Thummel, R. P. Bridged bibenzimidazolium salts and their conversion to ureaphanes. Tetrahedron Lett. 1994, 35, 33− 36. (b) Thummel, R. P.; Goulle, V.; Chen, B. Bridged derivatives of 2,2′-biimidazole. J. Org. Chem. 1989, 54, 3057−3061. (9) Sakamoto, R.; Soichiro, M.; Yuki, Y.; Mizuki, T.; Akihiko, T.; Chikaraish, K. N.; Kenji, N. Synthesis, characterization, and structureactivity relationship of the antimicrobial activities of dinuclear Nheterocyclic carbene (NHC)-silver(I) complexes. J. Inorg. Biochem. 2016, 163, 110−117. 8933

DOI: 10.1021/acsomega.9b00669 ACS Omega 2019, 4, 8926−8934

ACS Omega

Article

iron(III) ions and selective absorption of dyes. Dalton Trans. 2015, 44, 18795−18803. (20) (a) Du, H. J.; Wang, C. H.; Li, Y.; Zhang, W. L.; Xu, M. M.; Li, S. M.; Lu, Y. B.; Niu, Y. Y.; Hou, H. W. A supramolecular metalorganic framework derived from bismuth iodide and 4, 4′bipyridinium derivative: Synthesis, structure and efficient adsorption of dyes. Microporous Mesoporous Mater. 2015, 214, 136−142. (b) Liu, C. Y.; Xu, L. Y.; Ren, Z. G.; Wang, H. F.; Lang, J. P. Assembly of Silver(I)/N,N-Bis(diphenylphosphanylmethyl)-3-aminopyridine/Halide or Pseudohalide Complexes for Efficient Photocatalytic Degradation of Organic Dyes in Water. Cryst. Growth Des. 2017, 17, 4826−4834. (c) Zhang, J. G.; Gong, W. J.; Guan, Y. S.; Li, H. X.; Young, D. J.; Lang, J. P. Carboxylate-Assisted Assembly of Zinc and Cadmium Coordination Complexes of 1,3,5-Tri-4-pyridyl-1,2-ethenylbenzene: Structures and Visible-Light-Induced Photocatalytic Degradation of Congo Red in Water. Cryst. Growth Des. 2018, 18, 6172−6184. (d) Wang, F.; Li, F. L.; Xu, M. M.; Yu, H.; Zhang, J. G.; Xia, H. T.; Lang, J. P. Facile synthesis of a Ag(I)-doped coordination polymer with enhanced catalytic performance in the photodegradation of azo dyes in water. J. Mater. Chem. A 2015, 3, 5908− 5916. (e) Hu, F. L.; Shi, Y. X.; Chen, H. H.; Lang, J. P. A Zn(II) coordination polymer and its photocycloaddition product: syntheses, structures, selective luminescence sensing of iron(III) ions and selective absorption of dyes. Dalton Trans. 2015, 44, 18795−18803. (f) Cheng, H. J.; Tang, X. Y.; Yuan, R. X.; Lang, J. P. Structural diversity of Zn(II) coordination polymers based on bis-imidazolyl ligands and 5-R-1,3-benzenedicarboxylate and their photocatalytic properties. CrystEngComm 2016, 18, 4851−4862. (g) Lü, C. N.; Chen, M. M.; Zhang, W. H.; Li, D. X.; Dai, M.; Lang, J. P. Construction of Zn(II) and Cd(II) metal−organic frameworks of diimidazole and dicarboxylate mixed ligands for the catalytic photodegradation of rhodamine B in water. CrystEngComm 2015, 17, 1935−1943. (h) Dai, M.; Li, H. X.; Lang, J. P. New approaches to the degradation of organic dyes, and nitro- and chloroaromatics using coordination polymers as photocatalysts. CrystEngComm 2015, 17, 4741−4753. (21) (a) Wang, F. R.; Li, Z. Y.; Wei, D. H.; Niu, Y. Y.; Hou, H. W.; Wu, B. L. The conformational behavior of multivalent tri(imidazolium)cyclophanes in the hybrids with metal (pseudo)halides or polyoxometalates. CrystEngComm 2018, 20, 7184. (b) Li, N. Y.; Liu, D.; Ren, Z. G.; Lollar, C.; Lang, J. P.; Zhou, H. C. Controllable Fluorescence Switching of a Coordination Chain Based on the Photoinduced Single-Crystal-to-Single-Crystal Reversible Transformation of a syn-[2.2]Metacyclophane. Inorg. Chem. 2018, 57, 849− 856. (c) Li, N. Y.; Liu, D.; Abrahamsc, B. F.; Lang, J. P. Covalent switching, involving divinylbenzene ligands within 3D coordination polymers, indicated by changes in fluorescence. Chem. Commun. 2018, 54, 5831−5834. (d) Liu, D.; Ren, Z. G.; Li, H. X.; Lang, J. P.; Li, N. Y.; Abrahams, B. F. Single-Crystal-to-Single-Crystal Transformations of Two Three-Dimensional Coordination Polymers through Regioselective [2+2] Photodimerization Reactions. Angew. Chem., Int. Ed. 2010, 49, 4767−4770. (e) Hu, X. L.; Qin, C.; Wang, X. L.; Shao, K. Z.; Su, Z. M. A luminescent Dye@MOF as dual-emitting platform for sensing explosives. Chem. Commun. 2015, 51, 17521− 17524. (f) Li, Y. Y.; Xiao, M.; Wei, D. H.; Niu, Y. Y. Hybrid Supramolecules for Azolium-Linked Cyclophane Immobilization and Conformation Study: Synthesis, Characterization, and Photocatalytic Degradation. ACS Omega 2019, 4, 5137−5146. (22) Niu, Y. Y.; Zheng, H. G.; Hou, H. W.; Xin, X. Q. Heterothiometallic polymeric clusters. Coord. Chem. Rev. 2004, 248, 169−183. (23) (a) Dias, E. M.; Petit, C. Towards the use of metal-organic frameworks for water reuse: a review of the recent advances in the field of organic pollutants removal and degradation and the next steps in the field. J. Mater. Chem. A 2015, 3, 22484−22506. (b) Qin, J. S.; Zhang, S. R.; Du, D. Y.; Shen, P.; Bao, S. J.; Lan, Y. Q.; Su, Z. M. A Microporous Anionic Metal-Organic Framework for Sensing Luminescence of Lanthanide (III) Ions and Selective Absorption of Dyes by Ionic Exchange. Chem. - Eur. J. 2014, 20, 5625−5630.

(c) Zhao, S. N.; Song, X. Z.; Zhu, M.; Meng, X.; Wu, L. L.; Feng, J.; Song, S. Y.; Zhang, H. J. Encapsulation of LnIII Ions/Dyes within a Microporous Anionic MOF by Post-synthetic Ionic Exchange Serving as a LnIII Ion Probe and Two-Color Luminescent Sensors. Chem. Eur. J. 2015, 21, 9748−9752. (d) Cai, H.; Li, M.; Lin, X. R.; Chen, W.; Chen, G. H.; Huang, X. C.; Li, D. Spatial, Hysteretic, and Adaptive Host-Guest Chemistry in a Metal-Organic Framework with Open Watson-Crick Sites. Angew. Chem., Int. Ed. 2015, 54, 10454− 10459. (e) Yi, F. Y.; Li, J. P.; Wu, D.; Sun, Z. M. A Series of Multifunctional Metal-Organic Frameworks Showing Excellent Luminescent Sensing, Sensitization, and Adsorbent Abilities. Chem. - Eur. J. 2015, 21, 11475−11482. (f) Haque, E.; Lo, V.; Minett, A. I.; Harris, A. T.; Church, T. L. Dichotomous adsorption behaviour of dyes on an amino-functionalised metal-organic framework, aminoMIL-101(Al). J. Mater. Chem. A 2014, 2, 193−203. (g) Qi, P. G.; Wang, Z. J.; Liu, Z. T.; Yang, S. F.; Yang, Y.; Yao, J. J.; Zhang, G. X.; Zhang, D. Q. Conjugated donor−acceptor terpolymers entailing the Pechmann dye and dithienyl-diketopyrrolopyrrole as co-electron acceptors: tuning HOMO/LUMO energies and photovoltaic performances. Polym. Chem. 2016, 7, 3838−3847. (24) (a) Wu, B.; Zhang, W. H.; Rena, Z. G.; Lang, J. P. A 1D anionic coordination polymer showing superior Congo Red sorption and its dye composite exhibiting remarkably enhanced photocurrent response. Chem. Commun. 2015, 51, 14893−14896. (b) Du, Q.; Yao, C. Y. Determination of silver in the water by the method of flame atomic absorption spectrometry. Admin. Tech. Environ. Monit. (HUANJING JIANCE GUANLI YU JISHU) 2006, 18, 21−22 (in Chinese) . (25) (a) Liu, Y.; Wang, W. B.; Wang, A. Q. Effect of dry grinding on the microstructure of palygorskite and adsorption efficiency for methylene blue. Powder Technol. 2012, 225, 124−129. (b) Kang, X. Z.; Song, Z. W.; Shi, Q.; Dong, J. X. Utilization of Zeolite Imidazolate Framework as an Adsorbent for the Removal of Dye from Aqueous Solution. Asian J. Chem. 2013, 25, 8324−8328. (26) Wedlock, L. E.; Barnard, P. J.; Filipovska, A.; Skelton, B. W.; Berners-Price, S. J.; Baker, M. V. Dinuclear Au(I) N-heterocyclic carbene complexes derived from unsymmetrical azolium cyclophane salts: potential probes for live cell imaging applications. Dalton Trans. 2016, 45, 12221−12236. (27) Yoon, J. Y.; Kim, S. K.; Singh, N. J.; Lee, J. W.; Yang, Y. J.; Chellappan, K.; Kim, K. S. Highly Effective Fluorescent Sensor for H2PO4−. J. Org. Chem. 2004, 69, 581−583. (28) (a) Hahn, F. E.; Radloff, C.; Pape, T.; Hepp, A. Synthesis of Silver(I) and Gold(I) Complexes with Cyclic Tetra- and Hexacarbene Ligands. Chem. - Eur. J. 2008, 14, 10900−10904. (b) Dolomanov, O. V.; Bourhis, L. J.; Gildea, R. J.; Howard, J. A. K.; Puschmann, H. A complete structure solution, refinement and analysis program. J. Appl. Crystallogr. 2009, 42, 339−341.

8934

DOI: 10.1021/acsomega.9b00669 ACS Omega 2019, 4, 8926−8934