Assessing the Effects of Bioturbation on Metal Bioavailability in

School of Chemistry, University of Wollongong, Wollongong, NSW 2522, Australia. Environ. Sci. Technol. , 2016, 50 (6), pp 3055–3064. DOI: 10.1021/ac...
0 downloads 16 Views 1MB Size
Subscriber access provided by ORTA DOGU TEKNIK UNIVERSITESI KUTUPHANESI

Article

Assessing the effects of bioturbation on metal bioavailability in contaminated sediments by diffusive gradients in thin films (DGT) Elvio Diego Amato, Stuart L Simpson, Timothy Michael Remaili, David Spadaro, Chad V. Jarolimek, and Dianne F Jolley Environ. Sci. Technol., Just Accepted Manuscript • DOI: 10.1021/acs.est.5b04995 • Publication Date (Web): 05 Feb 2016 Downloaded from http://pubs.acs.org on February 13, 2016

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

Environmental Science & Technology is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 22

1 2

Environmental Science & Technology

Article Type: Research article

3 4 5

Assessing the effects of bioturbation on metal bioavailability in contaminated sediments by diffusive gradients in thin films (DGT)

6

Elvio D. Amato†‡, Stuart L. Simpson†*, Timothy M. Remaili †‡, David A. Spadaro†, Chad V. Jarolimek†, and

7

Dianne F. Jolley ‡*

8 9 10

† Centre for Environmental Contaminants Research, CSIRO Land and Water, Locked Bag 2007, Kirrawee, NSW 2232, Australia

11

‡ School of Chemistry, University of Wollongong, NSW 2522, Australia

12 13

* To whom correspondence may be addressed ([email protected]; [email protected])

14

Phone: +61 2 442213516; +61 2 97106807

15

ACS Paragon Plus Environment

Environmental Science & Technology

Page 2 of 22

16 17

ABSTRACT.

18

an organisms’ exposure to metals. Recently, the performance of the in situ technique of diffusive gradients

19

in thin films (DGT) for predicting metal bioavailability has been investigated in response to the increasing

20

demand of considering contaminant bioavailability in sediment quality assessments. In this study, we test

21

the ability of the DGT technique for predicting the metal bioavailability in clean and contaminated

22

sediments that are being subjected to varying degrees of sediments disturbance: low bioturbation (bivalve

23

Tellina deltoidalis alone) and high bioturbation (bivalve and actively burrowing amphipod, Victoriopisa

24

australiensis). Significant release of DGT-labile Cd, Ni, Pb and Zn, but lower Cu and Fe, occurred in the

25

pore and overlying waters of sediments exposed to high bioturbation conditions, resulting in higher

26

bioaccumulation of zinc in bivalves. Strong relationships were found between bioaccumulation of Pb and Zn

27

and time-integrated DGT-metal fluxes, whereas poor relationships were obtained using total or dilute-acid

28

extractable metal concentrations. This results demonstrate that DGT is a useful tool for assessing metal

29

bioavailability in sediments, and can provide useful predictions of metal bioavailable to benthic organisms

30

in dynamic sediment environments.

The burrowing and feeding activities of benthic organisms can alter metal speciation in sediments and affect

31 32 33 34

Keywords: Passive sampling; In situ, metal fluxes; bioturbation; sub-lethal toxicity; amphipod; sediment quality assessment

35

ACS Paragon Plus Environment

Page 3 of 22

Environmental Science & Technology

36

INTRODUCTION

37

Metal bioavailability is strongly linked to metal speciation, which in sediments is regulated by

38

biogeochemical processes. Burrowing and feeding activities of benthic organisms may alter the speciation of

39

metals in sediments by mixing and transporting fluids and sediment particles1-3. The introduction of

40

oxygenated water into sub-oxic and anoxic regions of the sediment may cause oxidation of dissolved Fe(II)

41

and Mn(II) to iron and manganese oxyhydroxide solid phases, and also oxidation of labile sulfide phases

42

such as acid-volatile sulfide (AVS).4-6 As these processes modify the partitioning of metals between

43

dissolved and particulate phases and the fluxes of metals to the pore waters, they also modify the exposure

44

and bioavailability of metals to the organisms in the sediments and overlying waters.7-9

45

Diffusive gradients in thin films (DGT) is an in situ technique that measures fluxes of metals present

46

in the sediment pore water as well as weakly-bound metals that dissociate from solid phases.10 In previous

47

studies, we demonstrated that DGT metal fluxes can be used for predicting toxicity to the amphipod Melita

48

plumulosa11 and the bivalve Tellina deltoidalis12 exposed to metal-contaminated marine sediments under

49

laboratory conditions. For nickel-spiked freshwater sediments, Costello et al.13 found that DGT-nickel

50

concentrations in surface sediments were less useful for predicting effects to macroinvertebrate abundance

51

or diversity than the potentially simpler measurements, for example, dilute-acid extractable nickel (SEM-Ni)

52

or (SEM-AVS)/foc (where SEM is simultaneously extracted metal released by the dilute-acid extraction,

53

and foc is the fraction of organic carbon in the sediment).

54

Many studies have observed useful relationships between DGT-labile metal concentrations and

55

bioaccumulation, for example Roulier et al.14 for copper and lead in the freshwater chironomid

56

Chironomus riparius; van der Geest and León Paumen15 for copper in the freshwater worm Tubifex; Dabrin

57

et al.16 cadmium accumulation in the freshwater mud snail Potamopyrgus antipodarum; and, Amato et al.17

58

for Cu, Pb and Zn and T. deltoidalis exposed to contaminated marine sediments under laboratory and field

59

conditions.

60

The majority of sediment toxicity and bioaccumulation studies are undertaken by exposing single

61

species of organisms to contaminants in sediments. However, in most sediment environments a range of

62

organisms coexist with differing behaviours and sensitivities to contaminants. The exposure and the risk

63

posed by the contaminants to the organisms in natural environments may therefore be significantly

64

influenced by the interactions between species and the behaviours that modify the bioavailability of

65

contaminants in sediments.8,18 For sediment quality assessments that rely heavily on laboratory-based

66

bioassays to assess potential impacts of contaminants to ecosystem health, neglecting to consider inter-

67

organism interactions may result in inaccurate assessment outcomes.

68

DGT sediment probes that are deployed through the sediment-water interface (SWI) can provide

69

information on metal speciation in different compartments of the sediment (oxic, sub-oxic, anoxic), and

70

potentially provide useful information on changes in metal bioavailability due to biological disturbance. In

71

this study, the use of DGT-metal fluxes were investigated for assessing the exposure and predicting the

72

bioaccumulation of metals in contaminated sediments as they are bioturbated by different organisms. Three ACS Paragon Plus Environment

Environmental Science & Technology

Page 4 of 22

73

sediments with different levels of contamination and physical properties were exposed to bioturbation by

74

either the bivalves T. deltoidalis alone (low bioturbation) or combined with the amphipod Victoriopisa

75

australiensis (high bioturbation). The DGT-metal fluxes (Cd, Cu, Fe, Mn, Ni, Pb, Zn) and major

76

bioaccumulated metals (Cu, Pb and Zn) were used to assess the degree to which the high bioturbation by the

77

amphipod influenced the metal bioaccumulation by the bivalve, and the benefits gained from using DGT-

78

metal flux measurements as an assessment tool, compared to other more traditional approaches such as total

79

and dilute-acid extractable metal concentrations, and the excess of AVS over SEM (AVS-SEM).19,20

80 81

MATERIALS AND METHODS

82

General Methods. All plasticware used for analyses was new and cleaned by soaking in 10% (v/v) HNO3

83

(BDH, AnalR) for ≥24 h then rinsed in deionised water (>18 MΩ·cm, Milli-Q, Millipore). Glass beakers

84

used for bioassays were washed in a dishwasher (Gallay Scientific) with detergent followed by acid washing

85

(1% HNO3) and rinsing with deionised water. All chemicals were analytical reagent grade or equivalent

86

analytical purity.

87

Filtered aliquots (0.45 µm, Sartorius) sampled from overlying waters were combined from replicates

88

and used for dissolved metal analysis. Sediment subsamples were collected before transfer into test vessels

89

and used to determine sediment chemical properties shown in Table 1. At the end of the experiment,

90

additional sediment mini-cores (thickness = 1 cm, 4 cm deep) were extracted from each test vessel and

91

immediately stored at -20 °C until analysis. These samples were used for investigating relationships between

92

AEM concentrations and metal bioaccumulation in organisms exposed to sediments, as AEM concentrations

93

were expected to change during the exposure period. The extrusion of sediment mini-cores (top and bottom

94

1.3±0.2 cm) and preparation of sediment for acid-volatile sulfide (AVS) and AEM analyses were undertaken

95

in a nitrogen gas-filled glove box. The fraction of fine particles of the sediment (