Assessment of Targeted Nanoparticle Assemblies for Atherosclerosis

ACS Appl. Mater. Interfaces , Article ASAP. DOI: 10.1021/acsami.9b02750. Publication Date (Web): April 10, 2019. Copyright © 2019 American Chemical S...
0 downloads 0 Views 948KB Size
Subscriber access provided by Nottingham Trent University

Biological and Medical Applications of Materials and Interfaces

Assessment of Targeted Nanoparticle Assemblies for Atherosclerosis Imaging with Positron Emission Tomography and Potential for Clinical Translation Yongjian Liu, Hannah Luehmann, Lisa Detering, Eric D Pressly, Alaina J McGrath, Deborah Sultan, Annie Nguyen, Susannah Grathwohl, Monica Shokeen, Mohamed Zayed, Robert J Gropler, Dana Abendschein, Craig J. Hawker, and Pamela K Woodard ACS Appl. Mater. Interfaces, Just Accepted Manuscript • DOI: 10.1021/acsami.9b02750 • Publication Date (Web): 10 Apr 2019 Downloaded from http://pubs.acs.org on April 11, 2019

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 19 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

Assessment of Targeted Nanoparticle Assemblies for Atherosclerosis Imaging with Positron Emission Tomography and Potential for Clinical Translation

Yongjian Liu,*† Hannah P. Luehmann,† Lisa Detering,† Eric D. Pressly,‡ Alaina J. McGrath, ‡ Deborah H. Sultan,† Annie Nguyen,§ Susannah Grathwohl, § Monica Shokeen,† Mohamed Zayed,, Robert J. Gropler,† Dana Abendschein,§ Craig J. Hawker,‡ Pamela K. Woodard*†

† Mallinckrodt Institute of Radiology, Washington University, St. Louis, MO 63110, United States ‡ Materials Department, University of California, Santa Barbara, CA 93106, United States § Department of Medicine, Washington University, St. Louis, MO 63110, United States

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 19

ABSTRACT: Nanoparticles have been assessed in preclinical models of atherosclerosis for detection of plaque complexity and treatment. However, their successful clinical translation has been hampered by less than satisfactory plaque detection, and lack of a general strategy for assessing the translational potential of nanoparticles. Herein, nanoparticles based on comb-copolymer assemblies were synthesized through a modular construction approach with precise control over the conjugation of multiple functional building blocks for in vivo evaluation. This high level of design control also allows physicochemical properties to be varied in a controllable fashion. Through conjugation of c-atrial natriuretic factor (CANF) peptide and radiolabeling with 64Cu, the 64Cu-CANF-Comb nanoparticle was assessed for plaque imaging by targeting natriuretic peptide clearance receptor (NPRC) in a double-injury atherosclerosis model in rabbits. The prolonged blood circulation and enhanced binding capacity of

64Cu-CANF-Comb

nanoparticles provided sensitive and specific imaging of NPRC overexpressed in atherosclerotic lesions by positron emission tomography (PET) at intervals during the progression of disease. Ex vivo tissue validation using autoradiography and immunostaining on human carotid endarterectomy specimens demonstrated specific binding of

64Cu-CANF-Comb

to human NPRC receptors. Taken together, this

study not only shows the potential of NPRC-targeted

64Cu-CANF-Comb

nanoparticles for increased

sensitivity to an epitope that increases during atherosclerosis plaque development, but also provides a useful strategy for the general design and assessment of translational potential of nanoparticles in cardiovascular imaging.

KEYWORDS: Nanoparticle, NPRC, atherosclerosis, positron emission tomography, translation

ACS Paragon Plus Environment

Page 3 of 19 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

Introduction Cardiovascular disease (CVDs) is the leading killer worldwide with atherosclerosis being the primary cause. It is a chronic inflammatory disease characterized by the accumulation of lipids, immune cells and cell debris in the vessel wall. It is the main underlying cause of CVDs including myocardial infarction, stroke, and peripheral arterial disease.1-4 Due to the chronic nature and long asymptomatic phase, the clinical challenge of atherosclerosis is predicting when a plaque may cause vessel occlusion and associated management of treatment to avoid fatal consequences.5 Although significant progresses have been achieved in risk factor modification, anatomic imaging techniques, new therapeutics, and revascularization procedures, the prevalence of CVDs and its complications are not only projected to increase by 12% by 2030,6 but also result in a significant financial burden.6 Complex plaque pathophysiology results from the dynamic expression and often low abundance of disease-related targets on advanced plaques, a scenario that limits clinically available anatomic imaging modalities from reliably visualizing specific cellular features or biological processes that identify highrisk individuals for targeted treatment. Thus, nanoparticles have demonstrated the advantages for early and sensitive detection of plaque and played more roles in drug discovery for cardiovascular diseases.5, 7-9 Of various imaging modalities, radionuclide-based molecular imaging, especially positron emission tomography (PET), has been extensively used for CVDs research due to its superior sensitivity, quantification, functional detection, non-invasive nature, and well-established pathways for human translation.10-12 Compared to small molecules or peptide-based imaging platforms with rapid in vivo pharmacokinetics, nanoparticles provide unique advantages for atherosclerosis imaging and therapy including extended blood circulation, improved sensitivity and specificity, and elevated drug loading capacity for theranostics.13-19 Previously, we reported a polymeric nanoparticle (64Cu-CANF-Comb) for the detection of natriuretic peptide clearance receptor (NPRC) that is overexpressed on plaques in a mouse apoE knock-out (apoE-/-) model using PET.20 This polymeric nanoparticle can be prepared using modular strategy that enables the

ACS Paragon Plus Environment

ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 4 of 19

synthesis in large quantify necessary for translational studies, we wanted to further assess this nanoprobe for plaque imaging in rabbits with advanced atherosclerosis.21 Moreover, based on our previous report showing up-regulation of NPRC receptor in the intima of advanced atherosclerotic lesions in the carotid arteries of patients who underwent carotid endarterectomy (CEA),22 we characterized the binding profile of

64Cu-CANF-Comb

to human NPRC receptors expressed on CEA specimens using ex vivo

autoradiography. We hypothesized that the combination of an advanced preclinical model and human CEA specimens would be a useful strategy to determine the potential of

64Cu-CANF-Comb

and other

agents for future assessment of atherosclerosis severity in patients using PET imaging. RESULTS AND DISCUSSION Synthesis of CANF-Comb nanoparticle The CANF-Comb nanoparticle was synthesized following a previous report to afford control over the conjugation of CANF on the nanostructure.20 The methacrylate-based functional monomers including PEG-methacrylate (PEGMA), CANF-PEG-methacrylate (CANF-PEGMA), and DOTA-methacrylate (DOTA-MA) were copolymerized with methyl methacrylate to prepare the CAN-Comb copolymer as outlined in Figure 1a. The controlled radical polymerization strategy enables the precise control of functional components incorporated in CANF-Comb by varying the feed ratios of the functional monomers, affording desirable physicochemical properties and targeting capability of the final CANFComb nanoparticles after assembly. As shown in Table 1, the targeted CANF-Comb nanoparticle has ~35 copies of CANF peptide on the surface for NPRC receptor targeting and ~105 copies of DOTA chelator buried in the core for 64Cu radiolabeling. PET imaging in rabbit atherosclerosis model At 4 weeks after air desiccation-induced injury of the femoral arteries in hypercholesterolemic rabbits, 64Cu-CANF-Comb

PET showed significant uptake in the injured artery with minimal signal observed in

the sham-operated artery (Figure 2) at 24 h post injection. Quantification showed that the SUV of 64Cu-

ACS Paragon Plus Environment

Page 5 of 19 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

CANF-Comb at the injury site was 4.93±0.98 (n=12), which was 2.5 times as much as that determined from the sham site (1.96 ± 0.66, n=12, p< 0.001). A competitive receptor blocking study, using an excess amount of non-radiolabeled CANF-Comb, resulted in more than 50% decrease of

64Cu-CANF-Comb

uptake at the injured site (2.36 ± 0.62, n=4) to a level not significantly different from the sham artery (1.53± 0.21, n=4) (Figure 2E, G), demonstrating the specificity of

64Cu-CANF-Comb

targeting NPRC

receptor expressed on plaque. Compared to NPRC-targeted

64Cu-CANF-Comb,

without the conjugation of CANF peptide, the non-

targeted 64Cu-Comb showed significantly lower tracer accumulation at the injury site at TP 1 (1.99 ± 0.88, p