Benzimidazolines Convert Sulfur Dioxide to Bisulfate at Room

Jun 2, 2017 - SO2 is a precursor to acid rain that poses risks to monumental structures such as the Tajmahal in India and Mayan temples in Mexico, as ...
0 downloads 3 Views 9MB Size
Subscriber access provided by UNIV LAVAL

Article

Benzimidazolines convert sulphur dioxide to bisulfate at room temperature and atmospheric pressure utilising aerial oxygen Sonam Mehrotra, Sakthi Raje, Anant Kumar Jain, and Raja Angamuthu ACS Sustainable Chem. Eng., Just Accepted Manuscript • Publication Date (Web): 02 Jun 2017 Downloaded from http://pubs.acs.org on June 3, 2017

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

ACS Sustainable Chemistry & Engineering is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 26

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

Benzimidazolines convert sulphur dioxide to bisulfate at room temperature and atmospheric pressure utilising aerial oxygen Sonam Mehrotra,†,# Sakthi Raje †,# Anant Kumar Jain† and Raja Angamuthu*† †

Laboratory of Inorganic Synthesis and Bioinspired Catalysis (LISBIC), Department of

Chemistry, Indian Institute of Technology Kanpur, Kanpur 208016, India. Corresponding Author *E-mail: [email protected]. Key words: sulfur dioxide activation – sulfuric acid - benzimidazole - bisulfate – metastable dianions – smog formation

ACS Paragon Plus Environment

1

ACS Sustainable Chemistry & Engineering

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 26

ABSTRACT. By employing a simple strategy of reacting SO2 gas with easily attainable hydride donors such as 2-substituted-1,3-dimethyl-2,3-dihydro-1H-benzo[d]imidazole, benzimidazoline and SO2 were converted into benzimidazolium bisulfate at room temperature and atmospheric pressure. Bisulfate originated from SO2, hydride from benzimidazoline and aerial oxygen. Metastable dimers of bisulfate anions were observed in the solid state and in solution where the anions are not stabilized by encapsulation in cages but through hydrogen bonding from benzimidazolium cations.

All the three benzimidazolines and resulted benzimidazolium

bisulfates have been characterized using 1H and

13

C NMR spectroscopy, high-resolution

electrospray ionization mass spectrometry and single crystal X-ray diffraction techniques.

ACS Paragon Plus Environment

2

Page 3 of 26

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

INTRODUCTION. Sulfur dioxide (SO2) is one among the small molecules that are detrimental to the environment and poses risks to human health. Prolonged exposure to SO2 contaminated air can cause respiratory and skin diseases. Oxides of sulfur can react with other molecules in the atmosphere to form fine particles that reduce visibility (haze). SO2 is a precursor to acid rain that poses risks to monumental structures such as Tajmahal in India and Mayan temples in Mexico, as sulfuric acid in the acid rain reacts with the marble exterior (CaCO3) and converts it into more soluble calcium sulfate (solubility in water: CaCO3, 1.3×10—4 mol/L; CaSO4, 4.5×10—2 mol/L). As a consequence, environmental chemists around the world are toiling to discover greener technologies to sequester and activate SO2 into value added commodities. Many strategies have been developed to sequester and/or activate SO2 using electron rich amines,1-4 ionic liquids,5-9 highly reactive metal-alkyl/aryl complexes10-28 of electron rich noble metals such as rhodium, ruthenium,29 platinum,30,31 iridium,32 metal-organic frameworks,33 multicomponent assemblies,34,35 etc., Interesting activation of SO2 was reported by Darensbourg et al., where the electron poor S of SO2 (O=S+−O— ↔ O—−S+=O ↔ O0.5—−S+−O0.5—) binds on an electron rich Ni(II)-bound-thiolate center through S—···SO2 interactions and undergoes Soxygenation utilizing aerial oxygen to yield sulfate; two electrons resulted from the sacrificial disulfide formation of an expensive ligand (eq 1).36-38 Industry uses vanadium based catalysts and temperature as high as 400 °C to produce sulfuric acid from SO2 (SO2 → SO3 → H2S2O7 → H2SO4).

ACS Paragon Plus Environment

3

ACS Sustainable Chemistry & Engineering

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 4 of 26

Recently, we have utilized benzothiazolines and its coordination complexes in aerial oxygen involved activation of SO2 into sulphuric acid at room temperature and atmospheric pressure.39 Benzothiazolines undergo aerial oxidation spontaneously to yield benzothiazoles, which hampers storing them for prolonged periods. We have managed to avoid this problem by installing benzothiazolines as ligands on transition metals to store them as stable coordination complexes.39 However, we sought to circumvent the use of transition metals in the process as they may pose risk to the environment. Thus we are in continuous search of hydrogen or hydride donors that are easily attainable and weaker reductants than benzothiazolines to avoid spontaneous

aerial

oxidation.40

In

the

aforementioned

search

we

stumbled

upon

benzimidazolines as sacrificial hydride donors, which are weaker as hydride donors than highly sensitive benzothiazolines (Figure 1).41-44 Figure 1. Structures of benzimidazolines used in the present work.

N H

HO N H

N H N

N

N

N

MB1-H

MB2-H

Br

MB3-H

Benzimidazoles are important class of organic compounds that are seen in many natural products and constitute parts of large number of highly sold drug molecules (Scheme 1). Bilastine (rhinoconjunctivitis and urticarial drug),45 Emedastine (allergic conjunctivitis),

ACS Paragon Plus Environment

4

Page 5 of 26

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

Clemizole (itching) and Picoprazole (antisecretory) are important drugs where benzimidazole moiety plays very crucial part.45 Omeprazole is used to treat gastroesophageal reflux disease (GERD), peptic ulcer disease and Zollinger–Ellison syndrome.46 Large number of antiviral drugs (TIBO, anti-HIV-1),47 antidiabetic drugs (Rivoglitazone)48, vasodilators for heart failure therapy (Pimobendan),49 oral anticoagulants (Dabigatran),50 retinoic acid metabolism blockers (Liarazole),51 opioid analgesics (Etonitazene, Clonitazene), narcotic analgesics (Bezitramide), anticancer drugs (AT9283, Galeterone, Veliparib),52-54 antimicrobial drugs (SMT19969)55 are also developed which comprise at least one benzimidazole moiety. Scheme 1. Few pharmaceutically important benzimidazole45 based drug molecules.

ACS Paragon Plus Environment

5

ACS Sustainable Chemistry & Engineering

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 6 of 26

RESULTS AND DISCUSSION. We have studied the reactions of benzimidazolines such as 1,3-dimethyl-2-phenyl-2,3-dihydro1H-benzo[d]imid yl)phenol

azole

(MB2-H)

(MB1-H), and

2-(1,3-dimethyl-2,3-dihydro-1H-benzo[d]

imidazol-2-

2-(6-bromopyridin-2-yl)-1,3-dimethyl-2,3-dihydro-1H-benzo[d]

imidazole (MB3-H) with SO2 in continuation to our efforts in small molecule sequestration56 and activation39,57 and report herein the activation of SO2 into bisulfate at room temperature and atmospheric pressure utilizing aerial oxygen (Scheme 2). Scheme 2. Representative reaction of SO2 with benzimidazolines showing the formation of 1,3dimethyl-2-phenyl-1H-benzo[d]imidazol-3-ium bisulfate (MB1HSO4) from 1,3-dimethyl-2phenyl-2,3-dihydro-1H-benzo[d]imidazole (MB1-H) upon interaction with SO2. Crystallographic details are available as supplementary information (Fig. S31, 32; Table S1; CCDC-1541081).

N H Ph N

i) SO 2 ii) O 2

N N

O O Ph HO S O

ACS Paragon Plus Environment

6

Page 7 of 26

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

Reactions of benzimidazolines MB1-H, MB2-H and MB3-H with SO2 yielded corresponding benzimidazolium bisulfates readily (Scheme 2) that were characterized by 1H and 13

C NMR spectroscopy and electrospray ionization mass spectrometric techniques (ESI-MS),

and single crystal X-ray diffraction studies. The yellow color benzimidazoline, 1,3-dimethyl-2phenyl-2,3-dihydro-1H-benzo[d]imidazole (MB1-H) with an oxidation potential of –68 mV (vs Fc+/Fc in acetonitrile at 298 K)58 was dissolved in dry acetonitrile at room temperature and SO2 was purged for 20 minutes; the color of the solution turned red upon purging SO2 which was left to stand in open air. Initial characterization of the resulted solution was performed employing high resolution ESI-MS; envelops of m/z = 223.1236 in positive ion mode corresponding to 1,3dimethyl-2-phenyl-1H-benzo[d]imidazol-3-ium cation (calculated m/z = 223.1235; Fig. S7, S4) and 96.9582 in negative ion mode corresponding to bisulfate anion (calculated m/z = 96.9596; Fig. S8, S9) were observed that unequivocally confirmed the loss of hydride from benzimidazoline (MB1-H) to yield 1,3-dimethyl-2-phenyl-1H-benzo[d]imidazol-3-ium cation with simultaneous formation of bisulfate anion which is in line with the observed reactivity of benzothiazolines with SO2 reported by us.39 Interestingly, an envelope of m/z = 194.9268 (Fig. S8) was also observed in negative ion mode which might correspond to the hydrogen bonded dimer of two bisulfate anions in protonated form (calculated m/z = 194.9269 for [HSO4¯⋅⋅⋅HSO4¯ + H+]¯ monoanion; Fig. S18). The observation of this metastable dimer made of two bisulfate anions is contrary to the Coulomb’s law but stabilized by hydrogen bonding to each other.58 This encouraged us to look for the possibilities of isolating this metastable dimer due to a recent report from Amar Flood where hydrogen-bonded bisulfate dimer was encapsulated in a cyanostar macrocyclic host.58 As MB1HSO4 does not have such a cage structure, observation of bisulfate dimer was a great surprise to us. Hence, we set out to see the stabilizing factors of such a dimer

ACS Paragon Plus Environment

7

ACS Sustainable Chemistry & Engineering

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 8 of 26

in solution and utilized MB2-H in SO2 activation; MB2-H comprises similar properties as MB1H and reacted with SO2 to yield MB2HSO4. Figure 2. Solid-state structure of 2-(2-Hydroxyphenyl)-1,3-dimethyl-1H-benzo[d]imidazol-3ium bisulfate (MB2HSO4) obtained by the reaction of SO2 with MB2-H showing the bisulfate dimers.58 Selected distances: O(7)⋅⋅⋅O(12), 2.551; O(6)⋅⋅⋅O(9), 2.607; O(1)⋅⋅⋅O(11), 2.662; O(2)⋅⋅⋅O(10), 2.644; S(2)-O(8), 1.4315(16); S(2)-O(5), 1.4385(16); S(2)-O(7), 1.4761(15); S(2)O(6), 1.5574(16); S(3)-O(11), 1.4452(16); S(3)-O(10), 1.4502(16); S(3)-O(9), 1.4640(15); S(3)O(12), 1.5521(15). Crystallographic details are available as supplementary information (Fig. S33, 34; Table S2; CCDC-1541079).

MB2-H was chosen as the hydroxyl group might help to trap the intermediates involved and/or to stabilize the metastable dimeric bisulfate. To our surprise, the hydroxyl group indeed stabilized the bisulfate dimer, which is seen in the solid-state structure unequivocally (Fig. 2). The distances observed in the X-ray structure of MB2HSO4 suggests that the hydrogen bonds present are closer to the range of strong than moderate ones.59 The bisulfate dimer is further connected to two benzimidazolium through O-H···O hydrogen bonds (Fig. 2). The cationic

ACS Paragon Plus Environment

8

Page 9 of 26

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

carbon center acquired trigonal planar geometry as seen in the solid-state structures of benzimidazolium bisulfate salts (Scheme2; Fig. 2, 4) as a result of aromatization upon loosing hydride from benzimidazoline to SO2. This can be clearly seen from the sum of the three angles (N1CN2, N1CCAr, N2CCAr) around the carbon which is ~360° in MBXHSO4 (X=1-3) whereas the same was 343.68° in MB2-H. The ESI-MS envelope corresponding to [HSO4¯⋅⋅⋅HSO4¯ + H+]¯ monoanion was more intense than the peak for HSO4¯ anion that indicates the pronounced stability of the bisulfate dimer in solution even at harsh conditions of ESI-MS spectrometry (Fig. 3, S17-S19). In addition to the envelopes for monomeric and dimeric bisulfate anions, we have observed envelopes for the anions [MB2+⋅⋅⋅(HSO4¯⋅⋅⋅HSO4¯)]¯ at 433.0370 (calculated m/z = 433.0375; Fig. S17, S19), [(MB2+⋅⋅⋅[HSO4¯⋅⋅⋅HSO4¯]⋅⋅⋅MB2+)-H+]¯ at 671.1506 (calculated m/z = 671.1482; Fig. SS17, S20), [(MB2+⋅⋅⋅[HSO4¯⋅⋅⋅HSO4¯]⋅⋅⋅MB2+)+HSO4¯]¯ at 769.1174 (calculated m/z = 769.1155; Fig. S17, S21) and [(MB2HSO4)3-H+]¯ anion at 1007.2303 (calculated m/z = 1007.2262; Fig. S17, S22). To the best of our knowledge this is the first time these many metastable anions have been observed to be stable in solution at harsh conditions. Figure 3. Part of the ESI mass spectrum of MB2HSO4 (anion mode) showing the isotopic distributions of [HSO4¯⋅⋅⋅HSO4¯ + H+]¯ and HSO4¯ monoanions at 194.9240 (Calc. 194.9269), 96.9572 (Calc. 96.9596) and 433.0370 (Calc. 433.0375) Daltons. Conditions: 20:80 solution of 0.1% formic acid in water (20) and acetonitrile (80), 80 °C source temperature, 22 V cone voltage, 3.5 kV capillary voltage. Complete details and full ESI-MS spectra are available as supplementary information (Fig. S9, S13, S16-S22).

ACS Paragon Plus Environment

9

ACS Sustainable Chemistry & Engineering

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 10 of 26

In order to unequivocally confirm that the presence of hydroxyl group in the MB2 moiety was the reason for the stabilization of the aforementioned metastable anions of bisulfates even in solution, we have designed MB3-H with bromopyridinyl substitution (Fig. S23-S26). The design of MB3-H was also inspired by our previous results where we have employed 2-(pyridin-2-yl)2,3-dihydrobenzothiazole to catch hold of the intermediate Bunte salt, S-(2-((pyridin-1-ium-2ylmethyl)amino)phenyl)thiosulfate.39 Though MB3-H was able to react with SO2 to yield MB3HSO4 in the similar manner as MB1-H and MB2-H (Fig. 4, S27-S30), stabilization of bisulfate dimer was not observed in its ESI-MS spectra (Fig. S29, S30); this suggests that the hydroxyl group of MB2-H was keeping the bisulfate dimers stable in solution through hydrogen bonds.

ACS Paragon Plus Environment

10

Page 11 of 26

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

Figure 4. Solid-state structure of 2-(6-bromopyridin-2-yl)-1,3-dimethyl-1H-benzo[d]imidazol-3ium bisulfate (MB3HSO4) obtained by the reaction of SO2 with MB3-H. Selected distances: S(2)-O(8), 1.4315(16); S(2)-O(5), 1.4385(16); S(2)-O(7), 1.4761(15); S(2)-O(6), 1.5574(16); S(3)-O(11), 1.4452(16); S(3)-O(10), 1.4502(16); S(3)-O(9), 1.4640(15); S(3)-O(12), 1.5521(15). Crystallographic details are available as supplementary information (Fig. S35, S36; Table S3; CCDC-1541080).

ACS Paragon Plus Environment

11

ACS Sustainable Chemistry & Engineering

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 12 of 26

CONCLUSIONS. Benzimidazolines are shown to convert SO2 into bisulfate anions at room temperature and atmospheric pressure utilising aerial oxygen producing benzimidazolium bisulfates in moderate to good yields (51-91%) though benzimidazolines are weaker hydride donors than benzothiazolines that were used as organic hydride donors in our previous study.39 One of the benzimidazolium bisulfate salts formed (MB2HSO4) showed interesting feature of stabilizing metastable dimers of bisulfate anions in solid-state and in solution at harsh conditions; this was possible by the hydrogen bonding provided by the hydroxyl group of benzimidazolium cations to the dimeric bisulfate anions. To date dimeric anions or clusters of anions have been observed only in solid-state; only in one case the bisulfate dimer has been observed in solution where it is encapsulated in a cage.58 Further studies from our lab will focus on newly developed hydride donors that are weaker than benzimidazolines or benzothiazolines in activating small molcules such as SO2. Studies on stabilizing the metastable bisulfate dimers might shed light on the formation of haze, aerosols through nucleation as bisulfate is among the most prevalent anions in atmosphere due to its pronounced stability.60

ACS Paragon Plus Environment

12

Page 13 of 26

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

Experimental Section. Materials. 1,2-Phenylenediamine (SDFCL), p-toluenesulfonyl chloride (SDFCL), pyridine (SDFCL), dimethylsulfate (SDFCL), NaOH flakes (Fisher), 6-bromopyridine-2-carboxaldehyde (TCI India), benzaldehyde (Rankem) and salicylaldehyde (SRL) were used as received from commercial sources. Solvents were distilled under dry nitrogen atmosphere using conventional methods. N,N'-(1,2-Phenylene)bis(N,4-dimethylbenzenesulfonamide),61 N1,N2-dimethylbenzene1,2-diamine62 and 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole63 were synthesized by following literature methods. Methods. NMR spectra were recorded on JEOL 500 MHz and JEOL 400 MHz spectrometers. Temperature was kept constant using a variable temperature unit within the error limit of ±1 K. The software MestReNova64 was used for the processing of the NMR spectra. Tetramethylsilane (TMS) or the deuterated solvent residual peaks were used for calibration. Mass spectrometry experiments were performed on a Waters-Q-ToF-Premier-HAB213 equipped with an electrospray interface. Spectra were collected by constant infusion of the sample dissolved in methanol or acetonitrile with 0.1% formic acid. The freeware mMass was used to simulate the calculated isotopic distributions.65 Crystal Structure Determinations. Single-crystal X-ray data were collected at 123 K on a Bruker SMART APEX CCD diffractometer using graphite-monochromated Mo Kα radiation (λ = 0.71069 Å). The linear absorption coefficients, the scattering factors for the atoms, and the anomalous dispersion corrections were taken from International Tables for X-ray Crystallography. Data integration and reduction were conducted with SAINT. An empirical absorption correction was applied to the

ACS Paragon Plus Environment

13

ACS Sustainable Chemistry & Engineering

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 14 of 26

collected reflections with SADABS using XPREP. Structures were determined by direct method using SHELXTL and refined on F2 by a full-matrix least-squares technique using the SHELXL97 program package. The lattice parameters and structural data are listed somewhere else in this Supporting Information. 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole. N H N MB1-H

In 50 ml Schlenk RB, N1,N2-dimethylbenzene-1,2-diamine (0.300 g, 2.202 mmol) was dissolved in 5 ml of dry dichloromethane with activated molecular sieves 3 Å. The solution of benzaldehyde (0.233 g, 2.202 mmol) in dry dichloromethane (5 ml) was slowly added to prestirred dichloromethane solution at 0 °C under nitrogen atmosphere. The resulting mixture was stirred at room temperature for 24 h and filtered through cannula under nitrogen atmosphere. The yellow filtrate was concentrated and crystallized in dichloromethane solution. The resulting white crystals was filtered off and dried under high vacuum. (0.050 g, 10%). 1H NMR (400 MHz, CDCl3): δH = 7.58 (m, 2H, Ar), 7.41 (m, 3H, Ar), 6.72 (dd, 2H, Ar), 6.43 (dd, 2H, Ar), 4.88 (s, 1H, CH), 2.57(s 6H, CH3). 13C NMR (100 MHz, CDCl3): δC = 142.23, 139.20, 129.46, 128.99, 128.60, 119.41, 105.85, 94.18, 33.30. High Resolution ESI-MS: m/z for C15H15N2 = 223.1231 (calcd. 223.1235) = [MB1]+. 2-(1,3-dimethyl-2,3-dihydro-1H-benzo[d]imidazol-2-yl)phenol. HO N H N MB2-H

ACS Paragon Plus Environment

14

Page 15 of 26

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

In 50 ml Schlenk RB, N1,N2-dimethylbenzene-1,2-diamine (0.238 g, 1.747mmol) was dissolved in 5 ml of dry dichloromethane with activated molecular sieves 3 Å. The solution of salicylaldehyde (0.213 g, 1.747mmol) in dry dichloromethane (5 ml) was slowly added to prestirred dichloromethane solution at 0 °C under nitrogen atmosphere. The resulting mixture was stirred at room temperature for 20 h and filtered through cannula under nitrogen atmosphere. The yellow filtrate was concentrated and added dry ethanol (5ml). The resulting pale yellow powder was filtered off and dried under high vacuum. (0.060 g, 14%). 1H NMR (400 MHz, DMSO-d6): δH = 9.59 (s, 1H, OH), 7.48 (dd, 1H, Ar), 7.16 (dt, 1H, Ar), 6.85-6.56 (m, 4H, Ar), 6.40 (dd, 2H, Ar), 5.32 (s, 1H, CH), 2.46 (s, 6H, CH3). 13C NMR (100 MHz, DMSO-d6): δC = 157.97, 143.15, 130.60, 130.11, 124.62, 120.18, 119.97, 116.50, 106.86, 100.44, 34.20. High Resolution ESIMS: m/z for C15H15N2O = 239.1186 (calcd. 239.1184) = [MB2]+. 2-(6-bromopyridin-2-yl)-1,3-dimethyl-2,3-dihydro-1H-benzo[d]imidazole. Br N H N N MB3-H

In a oven dried 50 mL Schlenk flask added 2 g of activated 4 Å molecular sieves and 10 mL toluene. It was stirred for 30 minutes at room temperature in N2 atmosphere, added N1,N2dimethylenzene-1,2-diamine (0.108 g, 0.73 mmol) and the brown solution was heated at 100 oC for 2 hours in N2 atmosphere. It was cooled to room temperature and 6-bromopyridine-2carboxaldehyde (0.136 g) was added as solid, immediately colour of the solution turned from brown to yellow. The yellow solution was heated at 100 oC for 12 hours and refluxed at 130 oC for 3 hours in N2 atmosphere. The yellow solution cannulated to 50 mL round bottom flask and the solvent was removed under reduced pressure gave orange yellow oil. It was dried under high

ACS Paragon Plus Environment

15

ACS Sustainable Chemistry & Engineering

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 16 of 26

vacuum for 1 hour gave orange yellow solid, which was dissolved in diethyl ether and left in -35 o

C forms orange crystals suitable for single crystal X-ray diffraction. (0.208 g, 94%). 1H NMR

(400MHz, CDCl3): δH = 7.83 (d, 1H, Py), 7.66 (t, 1H, Py), 7.52 (d, 1H, Py), 6.74 (dd, 2H, Ph), 6.45 (dd, 2H, Ph), 5.13 (s, 1H), 2.67 (s, 6H). 13C NMR (100MHz, CDCl3): δC = 161.68, 141.98, 141.03, 139.60, 128.26, 121.54, 119.69, 106.10, 93.50, 33.96. High Resolution ESI-MS: m/z for C14H13BrN3 = 302.0284 (calcd. 302.0293) = [MB3]+. 1,3-dimethyl-2-phenyl-1H-benzo[d]imidazol-3-ium bisulfate. N N

O O HO Ph S O

Yellow crystalline powder of HL (0.028 g, 0.124 mmol) was dissolved in dry acetonitrile (5 ml) and purged SO2 at room temperature for 20 min. While purging SO2, the color of the solution turned to bright red. The resulting solution was stored at -30 °C for one day to facilitate the precipitation of 1,3-dimethyl-2-phenyl-1H-benzo[d]imidazol-3-ium bisulfate and evaporated the solvent to get brick red precipitate. Crystals were grown in mixture of methanol and acetonitrile at -30 °C (0.020 g, 51%). 1H NMR (400 MHz, DMSO-d6): δH = 8.15 (dt, 2H, Ar), 7.91 (m, 2H, Ar), 7.83 (m, 5H, Ar), 3.89 (s, 6H, CH3). 13C NMR (100 MHz, DMSO-d6): δC = 151.32, 133.92, 132.70, 131.73, 130.44, 127.62, 121.99, 114.39, 33.79. High Resolution ESI-MS (cation mode): m/z for C15H15N2 = 223.1236 (calcd. 223.1235) = MB1+ cation. High Resolution ESI-MS (anion mode): m/z for HSO4 = 96.9582 (calcd. 96.9596) = bisulfate anion 2-(2-hydroxyphenyl)-1,3-dimethyl-1H-benzo[d]imidazol-3-ium bisulfate. HO N N

O HO

S O

O

ACS Paragon Plus Environment

16

Page 17 of 26

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

Yellow crystalline powder of HL (0.060 g, 0.249 mmol) was dissolved in dry acetonitrile (4 ml) and purged SO2 at room temperature for 20 min. While purging SO2, the color of the solution turned to brown. The resulting solution was stored at -30 °C for one day and crystals were grown in one week at room temperature (0.076 g, 91%). 1H NMR (400 MHz, DMSO-d6): δ = 11.04 (s, 1H, OH), 8.12 (dd, 2H, Ar), 7.76 (dd, 2H, Ar), 7.67 (m, 2H, Ar), 7.22 (m, 2H, Ar), 3.87 (s, 6H, CH3).

13

C NMR (100 MHz, DMSO-d6): δ157.58, 149.98, 135.96, 132.72, 132.63, 127.56,

120.87, 117.84, 114.34, 108.47, 33.54. High Resolution ESI-MS (cation mode): m/z = 239.1167 (calcd. 239.1184) = MB2+ cation. High Resolution ESI-MS (anion mode): m/z for HSO4 = 96.9572 (calcd. 96.9596) = bisulfate anion 2-(6-bromopyridin-2-yl)-1,3-dimethyl-1H-benzo[d]imidazol-3-ium bisulfate. Br N N

N

O HO

S O

O

Yellow powder of HL (37 mg, 0.121 mmol) was dissolved in dry acetonitrile (4 ml) and purged SO2 at room temperature for 20 min. While purging SO2, the color of the solution turned to brown. The resulting solution was stored at -30 °C for one day and crystals were formed immediately at -30 °C (0.041 mg, 85%). 1H NMR (400 MHz, DMSO d6): δH = 8.19 (d, 2H, Ph), 8.13-8.10 (m, 3H, py), 7.78 (dd, 2H, Ph), 4.06 (s, 6H, CH3). 13C NMR (100 MHz, DMSO-d6): δC = 146.80, 142.93, 142.18, 142.14, 132.98, 132.62, 128.94, 128.25, 114.69, 34.18. High Resolution ESI-MS (cation mode): m/z = 302.0290 (calcd. 302.0293) = MB3+ cation. High Resolution ESI-MS (anion mode): m/z for HSO4 = 96.9590 (calcd. 96.9596) = bisulfate anion

ACS Paragon Plus Environment

17

ACS Sustainable Chemistry & Engineering

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 18 of 26

ASSOCIATED CONTENT Supporting Information. The Supporting Information is available free of charge on the ACS Publications website at DOI: 10.1021/acssuschemeng.xxxxxxx. 1

H NMR, electrospray ionisation mass spectra, single crystal X-ray diffrcation data, packing

diagrams and crystallographic details (PDF) AUTHOR INFORMATION Corresponding Author *E-mail: [email protected]. ORCID Sonam Mehrotra: 0000-0002-0577-0405 Sakthi Raje: 0000-0001-6825-3942 Anant Kumar Jain: 0000-0002-2981-6527 Raja Angamuthu: 0000-0002-5152-0837 Notes The authors declare no competing financial interest. Author Contributions #

SM and SR contributed equally to this work.

RA designed the work and wrote the paper. SM, SR and AKJ executed the experiments. ACKNOWLEDGMENT

ACS Paragon Plus Environment

18

Page 19 of 26

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

The Ministry of Earth Sciences (MoES, India) and Indian Institute of Technology Kanpur (IITK/CHM/20120078) sponsored this research. S.M. and S.R. acknowledge the University Grants Commission (UGC, India) and Council of Scientific & Industrial Research (CSIR, India) for their Senior Research Fellowships. AKJ contributed to this work through Summer Undergraduate Research and Graduate Excellence (SURGE) program of IIT Kanpur. Tanay Batra and Tanmoy Seth are acknowledged for the artworks. DEDICATION Dedicated to Professor Parimal Kanti Bharadwaj on the occasion of his 65th birthday. REFERENCES (1) (2)

(3) (4) (5) (6) (7) (8) (9)

Tailor, R.; Abboud, M.; Sayari, A. Supported Polytertiary Amines: Highly Efficient and Selective sulfur dioxide Adsorbents. Environ. Sci. Tech. 2014, 48, 2025, DOI: 10.1021/es404135j. Woolven, H.; González-Rodríguez, C.; Marco, I.; Thompson, A. L.; Willis, M. C. DABCO-Bis(sulfur dioxide), DABSO, as a Convenient Source of Sulfur Dioxide for Organic Synthesis: Utility in Sulfonamide and Sulfamide Preparation. Org. Lett. 2011, 13, 4876, DOI: 10.1021/ol201957n. Zheng, D.; An, Y.; Li, Z.; Wu, J. Metal-free aminosulfonylation of aryldiazonium tetrafluoroborates with DABCO-bis(sulfur dioxide) and hydrazines. Angew. Chem.-Int. Edit. Engl. 2014, 53, 2451, DOI: 10.1002/anie.201309851. Nguyen, B.; Emmett, E. J.; Willis, M. C. Palladium-catalyzed aminosulfonylation of aryl halides. J. Am. Chem. Soc. 2010, 132, 16372, DOI: 10.1021/ja1081124. Cui, G.; Lin, W.; Ding, F.; Luo, X.; He, X.; Li, H.; Wang, C. Highly efficient sulfur dioxide capture by phenyl-containing azole-based ionic liquids through multiple-site interactions. Green Chem. 2014, 16, 1211, DOI: 10.1039/c3gc41458b. Huang, K.; Chen, Y.-L.; Zhang, X.-M.; Xia, S.; Wu, Y.-T.; Hu, X.-B. Sulfur dioxide absorption in acid salt ionic liquids/sulfolane binary mixtures: Experimental study and thermodynamic analysis. Chem. Eng. J. 2014, 237, 478, DOI: 10.1016/j.cej.2013.10.050. Tian, S.; Hou, Y.; Wu, W.; Ren, S.; Qian, J. Hydrophobic task-specific ionic liquids: Synthesis, properties and application for the capture of sulfur dioxide. J. Hazard. Mater. 2014, 278, 409, DOI: 10.1016/j.jhazmat.2014.06.037. Zeng, S.; Gao, H.; Zhang, X.; Dong, H.; Zhang, X.; Zhang, S. Efficient and reversible capture of sulfur dioxide by pyridinium-based ionic liquids. Chem. Eng. J. 2014, 251, 248, DOI: 10.1016/j.cej.2014.04.040. Yang, D.; Hou, M.; Ning, H.; Ma, J.; Kang, X.; Zhang, J.; Han, B. Reversible Capture of sulfur dioxide through Functionalized Ionic Liquids. ChemSusChem 2013, 1191, DOI: 10.1002/cssc.201300224.

ACS Paragon Plus Environment

19

ACS Sustainable Chemistry & Engineering

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

(10) (11) (12) (13) (14) (15) (16) (17) (18) (19) (20) (21)

(22) (23) (24) (25)

Page 20 of 26

Li, K.; Guzei, I. A.; Darkwa, J. Insertion of sulfur dioxide into metal-carbon bonds of chloro(methyl)palladium complexes. Polyhedron 2003, 22, 805, DOI: http://dx.doi.org/10.1016/S0277-5387(02)01377-3. Lefort, L.; Lachicotte, R. J.; Jones, W. D. Insertion of sulfur dioxide into the Metal−Carbon Bonds of Rhodium and Iridium Compounds, and Reactivity of the sulfur dioxide-Inserted Species. Organometallics 1998, 17, 1420, DOI: 10.1021/om971030m. Bibler, J. P.; Wojcicki, A. A Novel Reaction of Transition Metal Alkyls and Aryls. Sulfur Dioxide Insertion. J. Am. Chem. Soc. 1964, 86, 5051, DOI: 10.1021/ja01076a096. Bibler, J. P.; Wojcicki, A. Sulfur dioxide insertion. 3. Synthesis and characterization of pi-cyclopentadienyliron S-sulfinatodicarbonyl complexes. J. Am. Chem. Soc. 1966, 88, 4862, DOI: 10.1021/ja00973a020. Hartman, F. A.; Wojcicki, A. Sulfur dioxide insertion. 2. Ssulfinatopentacarbonylmanganese(i) complexes. J. Am. Chem. Soc. 1966, 88, 844, DOI: 10.1021/ja00956a045. Hartman, F. A.; Pollick, P. J.; Downs, R. L.; Wojcicki, A. Sulfur dioxide insertion. 4. A new allylic rearrangement. J. Am. Chem. Soc. 1967, 89, 2493, DOI: 10.1021/ja00986a051. Hartman, F. A.; Wojcicki, A. Sulfur dioxide insertion. 6. S-sulfinatopentacarbonyl complexes of group 6 and 7 transition metals. Inorg. Chem. 1968, 7, 1504, DOI: 10.1021/ic50066a007. Thomasson, J. E.; Wojcicki, A. Sulfur dioxide insertion. V. A new mode of addition of sulfur dioxide to a metal-carbon bond. J. Am. Chem. Soc. 1968, 90, 2709, DOI: 10.1021/ja01012a053. Graziani, M.; Bibler, J. P.; Montesan.Rm; Wojcicki, A. Sulfur dioxide insertion. X. Studies on cyclopentadienylmolybdenum and -tungsten sulfinato carbonyl complexes. J. Organomet. Chem. 1969, 16, 507, DOI: 10.1016/s0022-328x(00)89779-x. Pollick, P. J.; Bibler, J. P.; Wojcicki, A. Sulfur dioxide insertion. 9. Sulfinato complexes of divalent mercury. J. Organomet. Chem. 1969, 16, 201, Jacobson, S. E.; Reichroh.P; Wojcicki, A. Intermediacy of o-sulphinates in reaction of transition-metal carbonyl alkyls and aryls with sulphur dioxide. J. Chem. Soc. Chem. Comm. 1971, 1526, DOI: 10.1039/c29710001526. Jacobson, S. E.; Wojcicki, A. Sulfur-dioxide insertion. 20. reaction of sulfur-dioxide with some alkyl complexes of chromium, manganese, molybdenum, rhenium, and ruthenium, a comparative study of reactivity. J. Organomet. Chem. 1974, 72, 113, DOI: 10.1016/s0022-328x(00)82022-7. Wojcicki, A. Sulfur dioxide insertion reactions of transition metal alkyls and related complexes. Acc. Chem. Res. 1971, 4, 344, DOI: 10.1021/ar50046a003. Thomasson, J. E.; Robinson, P. W.; Ross, D. A.; Wojcicki, A. Sulfur dioxide insertion. 15. Transition metal-vinyl complexes containing a sultine ring. Inorg. Chem. 1971, 10, 2130, DOI: 10.1021/ic50104a008. Jacobson, S. E.; Wojcicki, A. Sulfur dioxide insertion. 14. Electronic effects in sulfur dioxide insertion reactions. J. Am. Chem. Soc. 1971, 93, 2535, Reichroh, P.; Wojcicki, A. Stereochemical studies at pseudotetrahedral, chiral metal of decarbonylation, carbonylation, and sulfur-dioxide insertion reactions. Inorg. Chem. 1974, 13, 2457, DOI: 10.1021/ic50140a031.

ACS Paragon Plus Environment

20

Page 21 of 26

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

(26)

(27) (28) (29)

(30)

(31)

(32) (33)

(34) (35) (36) (37) (38)

Severson, R. G.; Wojcicki, A. Lewis acid mediated reactions of organotransition metalcomplexes - marked promotion of the sulfur-dioxide insertion in alkyl(eta-5cyclopentadienyl)tricarbonyltungsten(II) by boron(III) and antimony(V) fluorides. J. Am. Chem. Soc. 1979, 101, 877, DOI: 10.1021/ja00498a015. Joseph, M. F.; Baird, M. C. Sulfur-dioxide insertion reactions of alkylruthenium compounds. Inorg. Chim. Acta 1985, 96, 229, DOI: 10.1016/s0020-1693(00)87586-6. Morton, M. S.; Lachicotte, R. J.; Vicic, D. A.; Jones, W. D. Insertion of elemental sulfur and sulfur dioxide into the metal-hydride and metal-carbon bonds of platinum compounds. Organometallics 1999, 18, 227, DOI: 10.1021/om980772s. Zhu, B.; Lang, Z.-L.; Ma, N.-N.; Yan, L.-K.; Su, Z.-M. Bonding interactions between sulfur dioxide and mono-ruthenium(II)-substituted Keggin-type polyoxometalates: electronic structures of ruthenium-sulfur dioxide adducts. Phys. Chem. Chem. Phys. 2014, 16, 18017, DOI: 10.1039/C4CP01389A. Arcís-Castillo, Z.; Muñoz-Lara, F. J.; Muñoz, M. C.; Aravena, D.; Gaspar, A. B.; Sánchez-Royo, J. F.; Ruiz, E.; Ohba, M.; Matsuda, R.; Kitagawa, S.; Real, J. A. Reversible Chemisorption of Sulfur Dioxide in a Spin Crossover Porous Coordination Polymer. Inorg. Chem. 2013, 52, 12777, DOI: 10.1021/ic4020477. Albrecht, M.; Gossage, R. A.; Lutz, M.; Spek, A. L.; van Koten, G. Diagnostic Organometallic and Metallodendritic Materials for sulfur dioxide Gas Detection: Reversible Binding of Sulfur Dioxide to Arylplatinum(II) Complexes. Chem.-Eur. J. 2000, 6, 1431, DOI: 10.1002/(SICI)1521-3765(20000417)6:83.0.CO;2-D. Collman, J. P.; Valentine, J. S.; Valentine, D. Formation of chelated sulfate by reactions between sulfur dioxide and oxygen in the coordination sphere of iridium and ruthenium complexes. Inorg. Chem. 1971, 10, 219, DOI: 10.1021/ic50096a002. Yang, S.; Sun, J.; Ramirez-Cuesta, A. J.; Callear, S. K.; DavidWilliam, I. F.; Anderson, D. P.; Newby, R.; Blake, A. J.; Parker, J. E.; Tang, C. C.; Schröder, M. Selectivity and direct visualization of carbon dioxide and sulfur dioxide in a decorated porous host. Nat Chem 2012, 4, 887, DOI: http://www.nature.com/nchem/journal/v4/n11/abs/nchem.1457.html - supplementaryinformation. Li, X.; Wu, J.; He, C.; Zhang, R.; Duan, C. Multicomponent self-assembly of a pentanuclear Ir-Zn heterometal-organic polyhedron for carbon dioxide fixation and sulfite sequestration. Chem. Commun. 2016, 52, 5104, DOI: 10.1039/C6CC00064A. Browne, C.; Ramsay, W. J.; Ronson, T. K.; Medley-Hallam, J.; Nitschke, J. R. Carbon Dioxide Fixation and Sulfate Sequestration by a Supramolecular Trigonal Bipyramid. Angew. Chem.-Int. Edit. Engl. 2015, 54, 11122, DOI: 10.1002/anie.201504856. Darkwa, J.; Moutloali, R. M.; Nyokong, T. Reversible sulfur dioxide reactions with cyclopentadienylnickel(II) organochalcogenide complexes. J. Organomet. Chem. 1998, 564, 37, DOI: 10.1016/s0022-328x(98)00604-4. Darensbourg, M. Y.; Reibenspies, J. H.; Tuntulani, T. Sulfur site adducts of sulfurdioxide in nickel-bound thiolates and their conversion to sulfate. Inorg. Chem. 1994, 33, 611, DOI: 10.1021/ic00081a033. Bhuvanesh, N. S. P.; Reibenspies, J. H.; Golden, M. L.; Darensbourg, M. Y.; Zhang, Y. G.; Lee, P. L. The vapochromic behavior, desulfoxidation and structural characterization

ACS Paragon Plus Environment

21

ACS Sustainable Chemistry & Engineering

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

(39) (40) (41)

(42) (43) (44)

(45) (46)

(47)

(48) (49) (50) (51)

Page 22 of 26

of the sulfur dioxide adducts of Ni(BME-DACH) from powder data. Synth. React. Inorg. Met.-Org. Nano-Metal Chem. 2005, 35, 11, DOI: 10.1081/sim-200047506. Mehrotra, S.; Butcher, R. J.; Angamuthu, R. Benzothiazoline Converts SO2 to Sulfuric Acid en Route to Benzothiazole. ACS Sustainable Chem. Eng. 2016, DOI: 10.1021/acssuschemeng.6b01330. McSkimming, A.; Colbran, S. B. The coordination chemistry of organo-hydride donors: new prospects for efficient multi-electron reduction. Chem. Soc. Rev. 2013, 42, 5439, DOI: 10.1039/C3CS35466K. Zhu, X.-Q.; Zhang, M.-T.; Yu, A.; Wang, C.-H.; Cheng, J.-P. Hydride, Hydrogen Atom, Proton, and Electron Transfer Driving Forces of Various Five-Membered Heterocyclic Organic Hydrides and Their Reaction Intermediates in Acetonitrile. J. Am. Chem. Soc. 2008, 130, 2501, DOI: 10.1021/ja075523m. Tamaki, Y.; Koike, K.; Ishitani, O. Highly efficient, selective, and durable photocatalytic system for CO2 reduction to formic acid. Chem. Sci. 2015, 6, 7213, DOI: 10.1039/C5SC02018B. Hasegawa, E.; Arai, S.; Tayama, E.; Iwamoto, H. Metal-Free, One-Pot, Sequential Protocol for Transforming α,β-Epoxy Ketones to β-Hydroxy Ketones and α-Methylene Ketones. J. Org. Chem. 2015, 80, 1593, DOI: 10.1021/jo5025249. Hasegawa, E.; Seida, T.; Chiba, N.; Takahashi, T.; Ikeda, H. Contrastive Photoreduction Pathways of Benzophenones Governed by Regiospecific Deprotonation of Imidazoline Radical Cations and Additive Effects. J. Org. Chem. 2005, 70, 9632, DOI: 10.1021/jo0514220. Gaba, M.; Mohan, C. Development of drugs based on imidazole and benzimidazole bioactive heterocycles: recent advances and future directions. Med. Chem. Res. 2016, 25, 173, DOI: 10.1007/s00044-015-1495-5. Hetzel, D. J.; Dent, J.; Reed, W. D.; Narielvala, F. M.; Mackinnon, M.; McCarthy, J. H.; Mitchell, B.; Beveridge, B. R.; Laurence, B. H.; Gibson, G. G.; Grant, A. K.; Shearman, D. J. C.; Whitehead, R.; Buckle, P. J. HEALING AND RELAPSE OF SEVERE PEPTIC ESOPHAGITIS AFTER TREATMENT WITH OMEPRAZOLE. Gastroenterology 1988, 95, 903, De Corte, B. L. From 4,5,6,7-Tetrahydro-5-methylimidazo[4,5,1-jk](1,4)benzodiazepin2(1H)-one (TIBO) to Etravirine (TMC125):  Fifteen Years of Research on NonNucleoside Inhibitors of HIV-1 Reverse Transcriptase. J. Med. Chem. 2005, 48, 1689, DOI: 10.1021/jm040127p. Schimke, K.; Davis, T. M. E. Drug evaluation: Rivoglitazone, a new oral therapy for the treatment of type 2 diabetes. Curr. Opin. Investig. Drugs 2007, 8, 338, Gordon, S. G.; Miller, M. W.; Saunders, A. B. Pimobendan in Heart Failure Therapy – A Silver Bullet? J. Am. Anim. Hosp. Assoc. 2006, 42, 90, DOI: 10.5326/0420090. Hauel, N. H.; Nar, H.; Priepke, H.; Ries, U.; Stassen, J.-M.; Wienen, W. Structure-Based Design of Novel Potent Nonpeptide Thrombin Inhibitors. J. Med. Chem. 2002, 45, 1757, DOI: 10.1021/jm0109513. Vahlquist, A.; Blockhuys, S.; Steijlen, P.; van Rossem, K.; Didona, B.; Blanco, D.; Traupe, H. Oral liarozole in the treatment of patients with moderate/severe lamellar ichthyosis: results of a randomized, double-blind, multinational, placebo-controlled phase II/III trial. British Journal of Dermatology 2014, 170, 173, DOI: 10.1111/bjd.12626.

ACS Paragon Plus Environment

22

Page 23 of 26

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

(52)

(53) (54)

(55) (56) (57) (58) (59) (60) (61)

(62)

(63) (64) (65)

Sun, L.; Li, D. W.; Dong, X.; Yu, H. Y.; Dong, J. T.; Zhang, C. M.; Lu, X. Y.; Zhou, J. Small-molecule inhibition of Aurora kinases triggers spindle checkpoint-independent apoptosis in cancer cells. Biochem. Pharmacol. 2008, 75, 1027, DOI: 10.1016/j.bcp.2007.11.007. Njar, V. C. O.; Brodie, A. M. H. Discovery and Development of Galeterone (TOK-001 or VN/124-1) for the Treatment of All Stages of Prostate Cancer. J. Med. Chem. 2015, 58, 2077, DOI: 10.1021/jm501239f. Penning, T. D.; Zhu, G. D.; Gandhi, V. B.; Gong, J. C.; Liu, X. S.; Shi, Y.; Klinghofer, V.; Johnson, E. F.; Donawho, C. K.; Frost, D. J.; Bontcheva-Diaz, V.; Bouska, J. J.; Osterling, D. J.; Olson, A. M.; Marsh, K. C.; Luo, Y.; Giranda, V. L. Discovery of the Poly(ADP-ribose) Polymerase (PARP) Inhibitor 2- (R)-2-methylpyrrolidin-2-yl -1Hbenzimidazole-4-carboxamide (ABT-888) for the Treatment of Cancer. J. Med. Chem. 2009, 52, 514, DOI: 10.1021/jm801171j. Jarrad, A. M.; Karoli, T.; Blaskovich, M. A. T.; Lyras, D.; Cooper, M. A. Clostridium difficile Drug Pipeline: Challenges in Discovery and Development of New Agents. J. Med. Chem. 2015, 58, 5164, DOI: 10.1021/jm5016846. Mehrotra, S.; Angamuthu, R. Janus head type lone pair-[small pi]-lone pair and S[three dots, centered]F[three dots, centered]S interactions in retaining hexafluorobenzene. Crystengcomm 2016, 18, 4438, DOI: 10.1039/C6CE00496B. Angamuthu, R.; Byers, P.; Lutz, M.; Spek, A. L.; Bouwman, E. Electrocatalytic carbon dioxide Conversion to Oxalate by a Copper Complex. Science 2010, 327, 313, DOI: 10.1126/science.1177981. Fatila, E. M.; Twum, E. B.; Sengupta, A.; Pink, M.; Karty, J. A.; Raghavachari, K.; Flood, A. H. Anions Stabilize Each Other inside Macrocyclic Hosts. Angew. Chem.-Int. Edit. Engl. 2016, 55, 14057, DOI: 10.1002/anie.201608118. Jeffrey, G. A. An Introduction to Hydrogen Bonding; Oxford University Press: New York, 1997. Yacovitch, T. I.; Wende, T.; Jiang, L.; Heine, N.; Meijer, G.; Neumark, D. M.; Asmis, K. R. Infrared Spectroscopy of Hydrated Bisulfate Anion Clusters: HSO4¯(H2O)1–16. J. Phys. Chem. Lett. 2011, 2, 2135, DOI: 10.1021/jz200917f. Zhu, X. Q.; Zhang, M. T.; Yu, A.; Wang, C. H.; Cheng, J. P. Hydride, hydrogen atom, proton, and electron transfer driving forces of various five-membered heterocyclic organic hydrides and their reaction intermediates in acetonitrile. J. Am. Chem. Soc. 2008, 130, 2501, DOI: 10.1021/ja075523m. Vlaar, T.; Cioc, R. C.; Mampuys, P.; Maes, B. U. W.; Orru, R. V. A.; Ruijter, E. Sustainable Synthesis of Diverse Privileged Heterocycles by Palladium-Catalyzed Aerobic Oxidative Isocyanide Insertion. Angew. Chem., Int. Ed. 2012, 51, 13058, DOI: 10.1002/anie.201207410. Igarashi, T.; Tayama, E.; Iwamoto, H.; Hasegawa, E. Carbon–carbon bond formation via benzoyl umpolung attained by photoinduced electron-transfer with benzimidazolines. Tetrahedron Lett. 2013, 54, 6874, DOI: 10.1016/j.tetlet.2013.10.028. MestReNova, 9.0.1-13254, Mestrelab Research S.L., Santiago de Compostela, Spain, www.mestrelab.com, 2014. Strohalm, M.; Kavan, D.; Novak, P.; Volny, M.; Havlicek, V. mMass 3: A CrossPlatform Software Environment for Precise Analysis of Mass Spectrometric Data. Anal. Chem. 2010, 82, 4648, DOI: 10.1021/ac100818g.

ACS Paragon Plus Environment

23

ACS Sustainable Chemistry & Engineering

Page 24 of 26

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 ACS Paragon Plus Environment

24

Page 25 of 26

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

For Table of Contents Use Only

N H Ph

i) SO 2 ii) O 2

N

N N

O O Ph HO S O

Benzimidazolines convert sulphur dioxide to bisulfate at room temperature and atmospheric pressure utilising aerial oxygen Sonam Mehrotra,† Sakthi Raje † Anant Kumar Jain† and Raja Angamuthu*† By employing a simple strategy of reacting SO2 gas with easily attainable hydride donors such as 2-substituted-1,3-dimethyl-2,3-dihydro-1H-benzo[d]imidazole, benzimidazoline and SO2 were converted into benzimidazolium bisulfate at room temperature and atmospheric pressure where bisulfate originated from SO2, hydride from benzimidazoline and aerial oxygen. Metastable dimers of bisulfate anions were observed in the solid state and in solution.

ACS Paragon Plus Environment

25

ACS Sustainable Chemistry & Engineering

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Paragon Plus Environment

Page 26 of 26