Biomass Treatment Strategies for Thermochemical Conversion

Mar 30, 2017 - motivating the development of renewable technologies as sustainable long-term solutions. These technologies rely on biomass, solar, win...
0 downloads 13 Views 739KB Size
Subscriber access provided by UNIV OF REGINA

Review

Biomass treatment strategies for thermochemical conversion Qiaoming Liu, Stephen C. Chmely, and Nourredine (Nour) Abdoulmoumine Energy Fuels, Just Accepted Manuscript • DOI: 10.1021/acs.energyfuels.7b00258 • Publication Date (Web): 30 Mar 2017 Downloaded from http://pubs.acs.org on March 31, 2017

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

Energy & Fuels is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 38

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Energy & Fuels

Biomass treatment strategies for thermochemical conversion Qiaoming Liua, Stephen C. Chmelyb and Nourredine Abdoulmouminea,b a Biosystems Engineering and Soil Science Department, University of Tennessee b Center for Renewable Carbon, University of Tennessee Abstract Biomass is among the most promising renewable resources to provide a sustainable solution to meet the world’s increasing using biochemical and thermochemical conversion technologies. Thermochemical conversion processes (pyrolysis, gasification, and combustion) thermally convert biomass into energy dense intermediates that can be in turn converted into power, liquid fuels and chemicals. The performance of the processes and quality of the intermediates are strongly affected by endogenic and technogenic inorganics. This review highlights investigations on the effect and the fate of inorganics during pyrolysis, gasification, and combustion of lignocellulosic biomass and critically and comprehensively presents pretreatment and posttreatment approaches for inorganic removal. During pyrolysis process, the inorganic contents can have significant catalytic effects and change the thermal degradation rate, chemical pathway, and bio-oil yield. During combustion process, the inorganic contents can bring various technological problems, environmental risks, and health concerns. During gasification process, the inorganic contents cause diversified downstream hazards. In recent years, several pretreatment (mechanical, thermal, and chemical pretreatment) and posttreatment (gas product and liquid product posttreatment) approaches have been employed to control and diminish the impact of inorganics during thermochemical conversion. Effective pretreatment technologies exist to remove inorganic contaminants to lower concentration limits. However, the main drawbacks of these pretreatments are that they (i) reduce the overall efficiency due to the need of further drying process of wet biomass after pretreatment and (ii) increase chemicals, facilities and drying costs. Posttreatment technologies are utilized to meet the strict levels of cleanup demands for the downstream applications. A great number of technologies exist to purify the raw synthesis gas stream that is produced by thermochemical conversion of biomass.

Keywords: Inorganic remediation; Thermochemical conversion; Inorganic contaminants; Lignocellulosic biomass

1 ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1

1. Introduction

2

The excessive consumption, finite reserves, and established contribution to the greenhouse

3

effect of fossil fuels is motivating the development of renewable technologies for as sustainable

4

long term solution. These technologies rely on biomass, solar, wind, water or geothermal

5

resources as their primary energy source. Among all these renewable resources, biomass is the

6

only that produce power, liquid fuels and chemicals thus making it an attractive option for

7

countries with abundant biomass resources.1 Biomass can be converted into intermediates that

8

can be used to produce power, liquid fuels and chemicals through biochemical (enzymatic

9

hydrolysis, sugar fermentation) or thermochemical (combustion, pyrolysis, gasification) routes.

10

The biochemical route seeks to convert carbohydrates in lignocellulosic biomass into energy

11

carriers for power2, ethanol and butanol as liquid fuels3, and other platform chemicals4-6. In the

12

thermochemical platform, biomass is converted thermally into energy dense intermediates that

13

can be in turn converted into power, liquid fuels, and chemicals.7 Specifically, biomass can be

14

converted into thermal energy during direct combustion; into thermal energy and a mixture of

15

flammable gas known as syngas during gasification; and into mostly an energy-rich liquid

16

known as bio-oil as well as small amount of syngas and solid biochar during pyrolysis.7 The

17

presence of biomass inorganics is detrimental to processes in both routes. For example, the

18

presence of inorganic compounds during biochemical conversion has been associated with a

19

number of issues that resulted in inhibition of biological growth or productivity through the

20

biochemical conversion route.8-10 Issues related to inorganics during thermochemical conversion

21

include equipment corrosion, fouling of surfaces, catalysts deactivation, and bed agglomeration

22

in reactors.11, 12

2 ACS Paragon Plus Environment

Page 2 of 38

Page 3 of 38

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

1

In recent years, recognizing the challenges associated with inorganics during biomass

2

conversion, several review papers attempted to organize the growing body of knowledge on the

3

fate of inorganics during conversion, their effects on the processes and pretreatment and

4

posttreatment strategies to mitigate those effects.13,

5

pretreatment techniques in the context of biochemical conversion technologies15 and

6

posttreatments reviews focused solely on gasification.11, 12 This review focuses only on the main

7

thermochemical conversion processes – namely pyrolysis, gasification and combustion – and

8

comprehensively reviews recent work to elucidate the fate of inorganics during these processes

9

and summarizes pretreatment and posttreatment techniques for controlling these elements.

10

14

However, past reviews focused on

2. The origin, nature, and variability of inorganics in lignocellulosic biomass

11

Besides the structural carbohydrates and lignin, lignocellulosic biomass also contains a small

12

amount of extraneous components that do not serve structural functions. These extraneous

13

components are present in and outside the cell wall but are generally not bound to it.16-18

14

Extraneous components are grouped into extractives and inorganics, the latter being of interest in

15

this review. Inorganic elements in lignocellulosic biomass have authigenic - formed in biomass -,

16

detrital - formed outside biomass, but fixed in or on biomass -, and technogenic - formed outside

17

biomass – origins (see Table 1).19, 20

3 ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1

Page 4 of 38

Table 1. Origin of inorganic matter in lignocellulosic biomass Process Origin Time of formation Formation mechanism Authigenic Syngenetic Inorganics that are the result of biogenic Natural processes during plant growth (e.g. photosynthesis, diffusion, adsorption, osmosis, pinocytosis, exocytosis, endocytosis, hydrolysis, precipitation, etc.). Epigenetic Inorganics generated from natural processes after plants died (evaporation, precipitation) Detrital Pre-syngenetic Fine (~ 1µm) inorganic particulates suspended in water and transported into the plant during syngenesis (endocytosis). Syngenetic, Small (