Subscriber access provided by TULANE UNIVERSITY
Biological and Medical Applications of Materials and Interfaces 2+
A biomimetic sensing system for tracing Pb distribution in living cells based on metal-peptide supramolecular assembly Shilang Gui, Yanyan Huang, Yuanyuan Zhu, Yulong Jin, and Rui Zhao ACS Appl. Mater. Interfaces, Just Accepted Manuscript • DOI: 10.1021/acsami.8b19076 • Publication Date (Web): 21 Jan 2019 Downloaded from http://pubs.acs.org on January 22, 2019
Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.
is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.
Page 1 of 26 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
1
A biomimetic sensing system for tracing Pb2+ distribution in living
2
cells based on metal-peptide supramolecular assembly
3 4
Shilang Gui,†,‡ Yanyan Huang,*,†,‡ Yuanyuan Zhu,†,‡ Yulong Jin,†,‡ Rui Zhao†,‡
5
† Beijing National Laboratory for Molecular Sciences, CAS Key Laboratory of
6
Analytical Chemistry for Living Biosystems, CAS Research/Education Center for
7
Excellence in Molecular Sciences, Institute of Chemistry, Chinese Academy of Sciences,
8
Beijing, 100190, China
9
‡ University of Chinese Academy of Sciences, Beijing, 100049, China
10
* Email:
[email protected] 11
1
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
12
Abstract
13
Metal-peptide interactions provide plentiful resource and design principles for developing
14
functional biomaterials and smart sensors. Pb2+, as a borderline metal ion, has versatile
15
coordination modes. The interference from competing metal ions and endogenous
16
chelating species greatly challenges Pb2+ analysis, especially in complicated living
17
biosystems. Herein, a biomimetic peptide-based fluorescent sensor GSSH-2TPE was
18
developed initiated from the structure of a natural occurring peptide glutathione. Lewis
19
acid-base theory was employed to guide the molecular design and tune the affinity and
20
selectivity of the targeting performance. The integration of peptide recognition and
21
aggregation-induced emission effect provides desirable sensing features, including specific
22
turn-on response to Pb2+ over 18 different metal ions, rapid binding and signal output, as
23
well as high sensitivity with a detection limit of 1.5 nM. Mechanism investigation
24
demonstrated the balance between the chelating groups and the molecular configuration of
25
the sensor contributes to the high selectivity towards Pb2+ complexation. The ion-mediated
26
supramolecular assembly lights up the bright fluorescence. The ability to imaging Pb2+ in
27
living cells was exhibited with minimal interference from endogeneous biothiols, no
28
background fluorescence and good biocompatibility. With good cell permeability, GSSH-
29
2TPE can monitor changes in Pb2+ levels, biodistribution thus predict possible damage
30
pathways. Such metal-peptide interaction-based sensing systems offer tailorable platforms
31
for design bioanalytical tools and show great potential for studying the cell biology of metal
32
ions in living biosystems.
33 34
Keywords: lead ion, biodistribution, cell imaging, aggregation-induced emission,
35
supramolecular assembly
36
2
ACS Paragon Plus Environment
Page 2 of 26
Page 3 of 26 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
37
Introduction
38
Lead ion (Pb2+), a highly toxic heavy metal contaminant, poses severe threats to both
39
environment and human health worldwide.1,2 With high body absorption efficiency and
40
non-degradable nature, lead accumulates and affects almost every organ systems in body,
41
including cardiovascular, renal, and reproductive systems.3,4 By mimicking calcium ion,
42
Pb2+ can pass the blood brain barrier and exert its most serious damage to central nervous
43
system.3,5 The fact that lead interferes with the developing brain and nervous system
44
makes children and fetus at a greater risk of lead poisoning.6,7 Although the industrial
45
usage of lead declined, the wide applications of lead in agriculture and household
46
continuously brings threats of lead exposure.1,8 Given such situation, it is critical to
47
develop rapid, selective and sensitive sensors for Pb2+ screening and detection. Monitoring
48
Pb2+ in living biosystems would be further beneficial for understanding the molecular
49
mechanism of the adverse effects of this ion.
50
Tremendous efforts have been devoted to the detection and treatment of Pb2+ in eco-/ bio-
51
samples.9-13 During the past decades, fluorescent probes and materials received
52
considerable attentions due to their simplicity and sensitivity for analysis.9,14-16 Capable of
53
intracellular and in vivo detection, fluorescent sensors show distinct advantage in imaging
54
and real-time monitoring various species in biological samples.10,17,18 Particularly, the
55
incorporation of metal ion-targeting ligands to signal activatable dyes provides off-on
56
and/or ratiometric strategies with high spatial and temporal resolution and in-situ
57
quantitation ability.19,20 However, current chemosensors for Pb2+ bioimaging in living
58
biosystems with switchable fluorescence are still limited. As the signal switch, Pb2+-
59
recognition ligands are central to the selectivity of the sensors, thus the accuracy of the
60
detection. Meanwhile, the binding affinity also directly affects the sensitivity of the
61
analysis. Therefore, effective design Pb2+-specific fluorescent sensors, especially the
62
recognition ligands are of great importance. 3
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
63
Metal-biomolecule interactions, essential for various biological processes, are ubiquitous
64
in nature.21-23 These naturally occurring complexes provides plentiful resource and design
65
principles for new recognition ligands.24 It has been revealed that coordination bonds are
66
frequently adopted by metal ions to bind proteins, peptides, nucleic acids and DNA.25-27
67
For Pb2+, different biomolecules, including DNA, DNAzymes and G-quadruplexes, have
68
been employed as the targeting moieties to gate the sensing signals.28-32 The biomolecule-
69
based sensors show advantage in high biocompatibility, which would be favorable for Pb2+
70
detection in biological samples.28 However, the delicate nature and difficulty in preparation
71
of macro biomolecules limit their broad applications. Furthermore, Pb2+ has high similarity
72
with several divalent ions (such as Ca2+) in structure and chemical property.5,33 As a
73
borderline Lewis acid, Pb2+ usually has cross reactions with other metal ions during ligand
74
binding.12,34,35 The interference from competing metal ions and endogenous chelating
75
species greatly challenge the selectivity and applicability of the sensors for probing Pb2+ in
76
complicated living biosystems.
77
Peptides with optional building blocks, rich coordination chemistry and high stability are
78
attractive candidates for tailoring selective metal-binding ligands.36-39 In organisms,
79
peptides act as ion transporters or scavengers via chelating various metal ions.40,41 Their
80
high biocompatibility, ease of chemical synthesis and functionalization further bring
81
favorable features for probing species in biological systems.36,42,43 Initiating from the
82
structure of an endogenous peptide glutathione (-GSH), herein a biomimetic Pb2+
83
recognizer was developed. Based on Lewis acid-base theory, the modification in the
84
molecular structure of GSH was expected to tune the non-specific and broad-spectrum
85
binding to highly specific towards Pb2+. The incorporation of an aggregation-induced
86
emission (AIE) fluorophore44-46 serves as the indicator for the recognition event, while the
87
targeting peptide plays a role as the signal switch. The Pb2+-sensing performance was
88
assayed with ion-induced fluorescence response, molecular assembly behavior, binding
89
kinetics and thermodynamics. Mechanism investigation demonstrated the particular 4
ACS Paragon Plus Environment
Page 4 of 26
Page 5 of 26 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
90
molecular configuration of the sensor during complexation contributes to the high
91
selectivity towards Pb2+. The feasibility of this peptide-based sensor for monitoring cellular
92
Pb2+ exhibits its great potential for studying the cell biology of this metal ion in living
93
biosystems.
94
Experimental
95
Synthesis of GSH-TPE. The tetraphenylethylene (TPE) conjugated GSH (GSH-TPE) was
96
synthesized with standard FMOC solid phase peptide synthesis strategy (Figure 1). Fmoc-
97
Gly-Wang resin was used as the starting material. Piperidine (20% in DMF), 4-
98
methylmorpholine and HBTU were used as deprotection reagent, activating reagent, and
99
coupling
agent,
respectively.
After
peptide
elongation,
2-(4-(1,2,2-
100
triphenylvinyl)phenoxy)acetic acid (TPE-COOH) was conjugated to the amino terminals
101
of the tripeptides under the same conditions. Finally, GSH-TPE was cleaved from the resins
102
with a freshly prepared reagent (94% TFA, 2.5% H2O, 2.5% EDT and 1% TIPS as
103
scavengers). The product was purified on a semi-preparative HPLC column (Dikma-C18,
104
250 mm×10 mm i.d.) using water with 0.1% TFA as the aqueous phase and CH3CN with
105
0.1% TFA as the organic phase.
106
Synthesis of GSSH-2TPE. GSSH-2TPE was obtained by oxidation of GSH-TPE with
107
iodine. A beaker with magnetic stirrer was charged with GSH-TPE (30.05 mg) and a
108
mixture of water-acetonitrile (4 mL, 1:1, v/v). Then, iodine (5.32 mg) was added at room
109
temperature. The reaction was monitored by HPLC. With 24-h oxidation, the mixed
110
solution was separated on a semi-preparative HPLC column to collect the product. After
111
purification, GSSH-2TPE was obtained as white solid.
112
Fluorescence measurement. The stock solutions (0.25 mM) of each metal ions (Pb2+, Al3+,
113
Cu2+, Ag+, Ni2+, Li+, Mg2+, Co2+, Ca2+, Cr3+, K+, Na+, Fe3+, Ba2+, Cd2+, Zn2+, Mn2+, Hg2+
114
Fe2+) were prepared with ultra-pure water, respectively. A stock solution of GSSH-2TPE
115
was prepared by dissolving the solid with DMSO to a concentration of 1 mM. For a typical 5
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
116
detection, 2.5 L GSSH-2TPE stock solution was mixed with the stock solution of metal
117
ion (10 L), followed by the dilution with appropriate amounts of water and acetonitrile to
118
a final volume of 500 L. Without further incubation, the corresponding fluorescence
119
spectrum was recorded with the excitation wavelength of 330 nm. The emission was
120
collected from 350 to 625 nm.
121
Electron microscopic characterization. The Pb2+-induced GSSH-2TPE assembly was
122
characterized scanning electron microscopy (SEM). For sample preparation, the mixed
123
solution of Pb2+ (5 μM) and GSSH-2TPE (5 μM) was dipped on cover slips. After dried
124
under atmosphere, the sample was coated with a thin layer of gold, then subjected for SEM
125
observation.
126
Fluorescence imaging of Pb2+ in living cells. HeLa cells were seeded into glass bottom
127
culture dishes at a density of 1.0105 cells mL-1 and cultured overnight for adhesion. The
128
adherent cells were washed with stroke-physiological saline solution three times and
129
loaded with Pb2+ (in stroke-physiological saline solution) at 37 oC for 30 min. After
130
removal of free Pb2+ by washing the cells with stroke-physiological saline solution, GSSH-
131
2TPE (20 M in stroke-physiological saline solution) was added. After incubated for 30
132
min. Fluorescence imaging was performed on an Olympus IX83 Fluorescence microscope
133
(Tokyo, Japan) with the USH-1030L 100W high pressure mercury burner (Olympus, Japan)
134
as the excitation source. The objective used for imaging was a UPLSAPO 100 oil-
135
immersion objective NA 1.40 (oil) (Olympus). Excitation filter: BP325-375 (Olympus),
136
emission filter: BA420 (Olympus). Image processing and analysis were performed on
137
Olympus software (cellsens standard). For comparison, the imaging parameters of the
138
microscope were set to be the same for all samples. Pixel intensity was analyzed on Image-
139
Pro Plus software.
140
Cytotoxicity assay. HeLa cells were seeded in 96-well plates at a density of 7000 cells per
141
well. After 24 h incubation, the culture medium was replaced by GSSH-2TPE solutions at
142
various concentrations (2, 5, 10 or 20 m), respectively. The cells were further cultured at 6
ACS Paragon Plus Environment
Page 6 of 26
Page 7 of 26 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
143
37 oC for another 24 h. The solutions were then discarded, and freshly prepared MTT
144
solution (100 L, 0.5 mg/mL in culture medium) was added to each well. This was
145
followed by incubation at 37 oC for 4 h. After removal of the MTT medium solution,
146
DMSO (150 L) was added to each well, and the plate was shaken for 10 min to dissolve
147
the formed precipitates. The absorbance values of the wells were read with a microplate
148
reader at 490 nm (Molecular Device, California, USA). The cell viability rate (VR) was
149
calculated from the equation VR=A/A0100%, in which A is the absorbance of the probe-
150
treated cells and A0 is the absorbance from cells without treatment. All data were obtained
151
from three separate experiments.
152
Results and Discussion
153
Design and synthesis.
154
Glutathione (-Glu-Cys-Gly, GSH), an important tripeptide, is well-known for its affinity
155
to various metal ions, including Hg2+, Cu2+, Pb2+, Ag+, etc.41 The co-existence of thiol and
156
carboxylic acid groups, as well as their specific intramolecular distribution account for the
157
binding towards metal ions. Aiming at specific detection of Pb2+, peptide design was started
158
from the structure of GSH. As a soft Lewis base, thiol group takes the dominant role for
159
the recognition of soft Lewis metal ions, such as Hg2+ and Ag+ (Figure 1). Accordingly,
160
carboxyl group as a hard Lewis base preferentially binds hard Lewis metal ions, such as
161
Al3+. For Pb2+, as a borderline Lewis metal ion, its property is intermediate between soft
162
and hard acids. Therefore, it is important to balance the affinity between thiol and carboxyl
163
groups for the development of Pb2+-specific ligand. In this effort, oxidation of GSH to
164
GSSH was proposed (Figure 1). The conversion of thiol group to disulfide group was
165
supposed to regulate the affinity and selectivity of the peptide. The unchanged molecular
166
configuration and remaining carboxyl groups were expected to maintain the binding
167
towards Pb2+. 7
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
168 169
Figure 1. Design, synthesis and sensing concept of GSSH-2TPE for Pb2+ detection. Images
170
were taken under UV light (360 nm).
171
As the signal reporter, an AIE fluorophore tetraphenylethylene (TPE) was introduced for
172
the conjugation with GSSH. The ion recognition-induced fluorescence turn-on effect is
173
appealing for highly sensitive sensing. Taking advantage of the high efficiency of solid
174
phase synthesis approach, the building unit GSH-TPE was facilely prepared. Direct
175
oxidation of GSH-TPE gave the final product GSSH-2TPE (Figure 1). The synthesized
176
compounds were characterized with HPLC, MS and NMR (Figure S-1~S-3, Supporting
177
Information).
178
Tuning ion-induced fluorescence behavior.
179
To validate the design and working concept, the fluorescence of both GSH-TPE and
180
GSSH-2TPE in the presence of soft (Ag+ and Hg2+), hard (Al3+ and Cr3+) and borderline
181
(Pb2+ and Cu2+) metal ions were recorded, respectively. With native GSH as the recognition
182
ligand, GSH-TPE responded to all three kinds of metal ions (hard, soft and borderline metal
183
ions) with blue fluorescence (Figure 1). Slightly stronger emission was detected for Ag+,
184
which was almost probably due to the strong coordination of thiol group towards soft Lewis 8
ACS Paragon Plus Environment
Page 8 of 26
Page 9 of 26 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
185
metal ions. In comparison, GSSH-2TPE showed distinctively different fluorescence
186
performance. Pb2+ brought the highest emission from GSSH-2TPE. No fluorescence was
187
detected for GSSH-2TPE solutions added with Ag+ or Hg2+. These results demonstrate that
188
the transformation of thiol group to disulfide bond successfully tunes down the affinity
189
towards soft Lewis metal ions. The balance between the soft and hard bases leads to the
190
recognition of Pb2+. It is also notable that the fluorescence from the binding of Pb2+ to
191
GSSH-2TPE is the brightest among all the complexes from GSH-TPE and GSSH-2TPE
192
(Figure 1).
193
Encouraged by the above results, the fluorescence turn-on behavior of GSSH-2TPE was
194
further examined with 19 different metal ions (Figure S-4). Pb2+ induced the strongest
195
fluorescence from GSSH-2TPE over the other ions, indicating the selectivity of GSSH-
196
2TPE towards Pb2+. It is noticed that after the oxidation of thiol group, the coordination
197
effect from carboxyl group becomes prominent. Therefore, binding of GSSH-2TPE to hard
198
Lewis metal ions needs to be considered. Among these hard metal ions, only Al3+ brought
199
weak fluorescence (Figure 1, Figure S-4). For Al3+, it belongs to p-block elements as Pb2+,
200
thus has flexible coordination geometry. Together with its hard Lewis acid property, Al3+
201
is able to bind carboxyl groups in GSSH-2TPE. However, the significant difference in ionic
202
size leads to different binding affinity. With a Shannon radii of 119 pm, Pb2+ fits the cavity
203
of GSSH-2TPE created for chelating. The match in geometry reinforces the coordination
204
bonding between Pb2+ and GSSH-2TPE and results in strong fluorescence. The small Al3+
205
(53 pm) cannot accommodate the coordination cavity formed by GSSH-2TPE. Although
206
there are multiple carboxyl groups in GSSH-2TPE, the mismatched size and loose binding
207
between GSSH-2TPE and Al3+ result in weak fluorescence. In biosystems, Ca2+ is usually
208
substituted by Pb2+, however Ca2+ cannot mimic Pb2+ to coordinate with GSSH-2TPE
209
(Figure S-4). These can be ascribed to the restricted coordination number (6–8) of Ca2+
210
which cannot be meet by the structure of GSSH-2TPE (four carboxyl groups). Moreover, 9
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
211
alkali and alkaline earth metal ions tends to form hydrated structure with H2O,47 which
212
further prevents it from binding with GSSH-2TPE.
213
To address possible interference from Al3+, further regulation of the affinity and selectivity
214
of GSSH-2TPE was performed. Ammonium fluoride (NH4F) was employed as the
215
competing reagent to adjust the interactions (Figure S-5, Supporting Information). With
216
optimized concentration (Figure S-5), NH4F effectively inhibits the Al3+-induced signal by
217
blocking its binding to GSSH-2TPE with strong hard-acid bonding of F-. No sacrifice in
218
the Pb2+-induced fluorescence was observed. Under these conditions, 18 metal ions with
219
different valence and properties were mixed with GSSH-2TPE either individually or as a
220
mixture. None of these metal ions can turn on the emission of GSSH-2TPE (Figure 2a).
221
Even these borderline metal ions (Fe2+, Co2+, Ni2+, Cu2+ and Zn2+) also cannot light up the
222
fluorescence. This can be ascribed to their small and unfitted sized for ligand complexation
223
(Table S-1), which disabled stable binding with GSSH-2TPE. Furthermore, these transition
224
metal ions belong to d-block elements. Their inflexible geometry cannot accommodate
225
different ligand configuration.48 Pb2+ is the only metal ion that can induce the blue
226
fluorescence signal from GSSH-2TPE, thus can be easily discriminated either individually
227
or co-existing with various metal ions in complicated samples. By tuning the affinity with
228
molecular design and competing reagent, GSSH-2TPE provides high selectivity for Pb2+
229
recognition and detection.
230 231
Figure 2. (a) Fluorescence variation of GSSH-2TPE responding to 19 different metal ions,
232
respectively. Insert: fluorescence spectra of GSSH-2TPE in the mixtures of metal ions. Ion
233
mixture = Ni2+, Hg2+, Li+, Mg2+, Cu2+, Co2+, Ca2+, Cr3+, K+, Na+, Fe3+, Al3+, Ag+, Ba2+, 10
ACS Paragon Plus Environment
Page 10 of 26
Page 11 of 26 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
234
Cd2+, Zn2+, Mn2+, and Fe2+. [GSSH-2TPE] = 5 M, [metal ion] = 5 M. (b) Fluorescence
235
spectra of GSSH-2TPE (5 M) responding to various concentrations of Pb2+. (c) Plot of
236
fluorescence intensity of GSSH-2TPE to Pb2+ concentration. Solvent: aqueous solution of
237
NH4F (80 M) containing 20% CH3CN.
238
Rapid and sensitive fluorescence turn-on detection of Pb2+.
239
Binding kinetics and thermodynamics are crucial for the sensing performance of GSSH-
240
2TPE. Kinetic study was performed by real-time monitoring the fluorescence from GSSH-
241
2TPE upon the addition of Pb2+ (Figure S-6, Supporting Information). Within 1 min, the
242
emission reached the maximum. Such fast binding and signal responding are appealing for
243
rapid and real-time analysis.
244
Fluorescence titration shows the dependence of the emission intensity on Pb2+
245
concentration in the range of 0.1 - 5 M (Figure 2b). The signal obtained a plateau with
246
1.0 equiv of Pb2+, indicating the saturation of the binding. According to the 3 rule,49,50
247
the detection limit was calculated as 1.5 nM (Figure S-7), which is lower than many
248
previously reported fluorescence sensors.29,37,51 This sensing performance can well satisfy
249
the requirement of EPA drinking water regulation of Pb2+ (48 nM). From the fluorescence
250
binding isotherm, the dissociation constant (KD) between GSSH-2TPE and Pb2+ was
251
estimated as 2.1 10-6 M (Figure S-8). Such high affinity contributes to the high sensitivity
252
of the peptide sensor.
253
In previous works, higher sensitivity has also been reported for some Pb2+ sensors in
254
solutions by using nanomaterials and/or DNAzyme.52-55 However, these sensors cannot be
255
applied for analyzing Pb2+ in living cells. Given the high biocompatibility and tailorable
256
features of peptide, peptide-based sensors attract increasing interests. Among these, GSH
257
is the most widely used peptide for Pb2+ sensing. However, the selectivity and sensitivity
258
are limited due to its general affinity towards various metal ions. Herein, by taking 11
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
259
advantages of peptide recognition and Pb2+-induced emission effect, GSSH-2TPE shows
260
high affinity, selectivity and sensitivity for Pb2+ in biosystems.
261
Investigation of Pb2+-peptide assembly mechanism.
262
For AIE fluorophores, the switch-on of fluorescence is usually accompanied with the
263
formation of nanoassemblies. In the effort to reveal the Pb2+-induced fluorescence
264
mechanism, GSSH-2TPE solutions with Pb2+ were characterized with dynamic light
265
scattering (DLS) analysis. As shown in Figure 3a, the presence of Pb2+ resulted in the
266
generation of nanoparticles with an average diameter of 118 nm. Such phenomenon was
267
further confirmed by SEM observation. For GSSH-2TPE only, no obvious assembly was
268
found (Figure 3b). Nano-sized particles (~100 nm) were detected in the mixed sample of
269
GSSH-2TPE and Pb2+. The emissive behavior of these nanoparticles was imaged with
270
fluorescence microscopy (Figure 3f). These results manifest that Pb2+ is the inducer of
271
GSSH-2TPE assembling. The generated nanoaggregates are the source of the blue
272
fluorescence.
273 12
ACS Paragon Plus Environment
Page 12 of 26
Page 13 of 26 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
274
Figure 3. (a) DLS characterization of the assembly behavior of GSSH-2TPE (5 M) in the
275
presence of Pb2+ (5 M). (b) SEM images of GSSH-2TPE without and with the presence
276
of Pb2+. Scale bar: 100 nm. (c) MS characterization of the coordination complex from
277
GSSH-2TPE and Pb2+ (ESI, negative mode). The calculated m/z for [M + Pb - 4H]2− is
278
795.82; the calculated m/z for [M-2H]− is 693.22. (d) FT-IR chemical imaging microscopic
279
characterization of GSSH-2TPE (5 M) with and without Pb2+ (5 M). (e) Possible process
280
for the formation of coordination complex and supramolecular assembling of fluorescent
281
nanoaggregates from GSSH-2TPE and Pb2+. (f) Fluorescence microscopic image of the
282
nanoparticles assembled from GSSH-2TPE and Pb2+. Scale bar: 5 m.
283
To investigate the molecular basis of the ion-induced assembly, the coordination complex
284
was characterized with mass spectrometer, Job’s plot assay, competitive binding assay and
285
Fourier transform infrared spectroscopy (FT-IR). In MS spectrum, an m/z signal (m/z
286
795.92) attributed to the complex of [GSSH-2TPE + Pb2+] was detected (Figure 3c).
287
Binding assays by continuous variation of Pb2+ mole fraction gave a peak at a mole fraction
288
of 0.5 in the Job’s plot (Figure S-9). Both results exhibit that the binding stoichiometry of
289
GSSH-2TPE with Pb2+ is 1:1. The competition assay with GSSH demonstrates that the
290
peptide structure plays the central role for Pb2+ recognition (Figure S-10). The TPE parts
291
mainly act as the signal generator. From microscopic FT-IR characterization (Figure 3d),
292
significant diminish of the carboxylic C=O vibration signal (1726 cm-1) and the shift of
293
stretching vibration of COO- (1414 cm-1) towards lower wavenumber (1409 cm-1) suggest
294
the involvement of carboxyl group in GSSH-2TPE for Pb2+ coordination. The shift of
295
vibration of amide bonds from 1647 cm-1 to 1638 cm-1 can be ascribed to the formation of
296
hydrogen bonds during the formation of nanoaggregates. These results provide useful
297
insights into the formation of coordination complex and supramolecular assembly.
298
The specificity of GSSH-2TPE towards Pb2+ can be explained with the properties of ligand
299
and metal ions. With multiple coordination sites, GSSH-2TPE binds Pb2+ with a 13
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
300
stoichiometry of 1:1, thus is a polydentate ligand. For polydentate ligands, the selectivity
301
and stability of the chelation is determined by not only Lewis acid-base theory, but also the
302
geometry and cavity size of the coordination complex. As a borderline metal ion, Pb2+
303
binds both hard and soft donor atoms, such as oxygen and sulfur atoms in GSSH-2TPE. In
304
GSSH-2TPE, there are four free carboxylic acid groups available for Pb2+ chelating (Figure
305
3e). The high tendency of Pb2+ to form strong bonds with sulfur-containing groups
306
reinforces the stability of the coordination complex. Particularly, the large size of Pb2+ (119
307
pm) could also contribute to the selective binding, which well fit the cavity created by the
308
ligand. Moreover, as a p-block elements, Pb2+ has versatile coordination chemistry and can
309
adopt various geometries. The match in chelating bonds, size and configuration leads to
310
the high affinity and specificity between GSSH-2TPE and Pb2+.
311
For the signal generation, restriction of intramolecular rotation lays the fundamental for the
312
light up of AIE fluorophores. The formation of complex between GSSH-2TPE with Pb2+
313
brings steric hindrance which impedes the bond rotation in TPE moieties. Furthermore,
314
during the supramolecular assembly of nanoaggregates, the 1:1 complex of GSSH-2TPE
315
and Pb2+ is employed as the building block (Figure 3e). The intermolecular noncovalent
316
forces including hydrogen bonds between amide and carboxyl groups, - stacking
317
between the benzene rings in TPE moieties and electrostatic forces drive the self-
318
assembling of nanoparticles. The restriction of intramolecular rotation of TPE structure
319
gives rise to the bright blue emission (Figure 3f).
320
Imaging detection of Pb2+ in living cells.
321
To apply GSSH-2TPE for tracking Pb2+ in living cells, possible interference from
322
endogenous biothiol species such as GSH, cysteine, homocysteine needs to be excluded.
323
No obvious inhibition to the Pb2+-induced fluorescence signal from GSSH-2TPE was
324
detected, when using these biothiol species and their mixtures as competitors (Figure S-
325
11). The presence of Ca2+ and high concentration Mg2+ in cells was also considered. No 14
ACS Paragon Plus Environment
Page 14 of 26
Page 15 of 26 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
326
interference from Mg2+ and Ca2+ was detected even when Mg2+ concentration was as high
327
as 1 mM (Figure S-12). These results provides the basis for applying GSSH-2TPE for
328
sensing Pb2+ in cells.
329
The feasibility of GSSH-2TPE for cell imaging was probed by treating HeLa (cervical
330
cancer cell line) cells with and without Pb2+. In the absence of Pb2+, no fluorescence emitted
331
from GSSH-2TPE-incubated HeLa cells (Figure 4a). No background and non-specific
332
fluorescence were detected, which is favorable to acquire high signal-to-noise ratio and
333
high sensitivity. This also further excludes the interference from endogenous Ca2+ and
334
Mg2+. In contrast, distinct fluorescence was observed for Pb2+-preloaded cells after the
335
incubation with GSSH-2TPE (Figure 4a). These results suggest the capability and
336
specificity of GSSH-2TPE for Pb2+ sensing even in complicated biosystems.
337 338
Figure 4. (a) Fluorescence microscopic images of living HeLa cells with GSSH-2TPE (20
339
M) with and without the addition of Pb2+ (20 M). (b) Monitoring binding kinetics of
340
GSSH-2TPE to Pb2+ in cells. Cells were preloaded with Pb2+ (20 M), followed by the
341
addition of GSSH-2TPE (20 M). Images were obtained with different incubation time
342
with GSSH-2TPE. Scale bar: 10 m. (c) Pixel intensity analysis of the cell images with
343
different GSSH-2TPE incubation time.
15
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
344
When exists individually, Al3+ induces weak fluorescence of GSSH-2TPE, which may
345
bring selectivity problem during biological application. In competitive binding assays,
346
Pb2+-responding fluorescence was not affected by the co-existence of Al3+ even at high
347
Al3+ concentration (Figure S-13, Supporting Information). Moreover, Al3+ cannot induce
348
any fluorescence in cells due to its weak affinity with GSSH-2TPE (Figure S-13d). These
349
results ensure the high specificity of GSSH-2TPE for Pb2+ analysis in complicated
350
biosystems. To assess the sensitivity of GSSH-2TPE for Pb2+ in cells, lower Pb2+
351
concentration were used for the treatment of cells (Figure S-14). At a concentration as low
352
as 100 nM, obvious fluorescence still can be clearly observed in cells, while cells without
353
Pb2+ treatment remained dark under the same conditions
354
Cellular binding kinetics of GSSH-2TPE towards Pb2+ was investigated by monitoring the
355
fluorescence of cell images obtained at different incubation times (Figure 4b, c and Figure
356
S-15). With 5-min incubation, cell membrane became fluorescent, indicating the binding
357
of GSSH-2TPE to membrane-anchored Pb2+. As the incubation time prolonged to 10 min,
358
blue fluorescence inside cells was detected, suggesting the internalization of GSSH-2TPE
359
and its binding to intracellular Pb2+. With 15-min incubation, the fluorescence of the cells
360
further intensified. The signal intensity almost kept the same after treated for 20 min,
361
demonstrating the saturation of the binding between GSSH-2TPE and Pb2+. Based on these
362
results, 20 min was chosen as the optimal incubation time to reach the binding equilibrium.
363
Encouraged by the high sensitivity, selectivity and fast response, GSSH-2TPE was applied
364
to trace the dependence of Pb2+ biodistribution on exposure dosage. At a Pb2+ concentration
365
of 5 M, blue fluorescence was observed both inside and surrounding the cells (Figure 5b).
366
Noticeably, much stronger emission was from cell membrane, denoting that at lower
367
concentration, Pb2+ ions tend to be retained by the lipid structure. This is in accordance
368
with the membrane association property of Pb2+.56 For HeLa cells loaded with 10 M Pb2+,
369
the overall fluorescence signal greatly enhanced. Besides, the fluorescence distribution 16
ACS Paragon Plus Environment
Page 16 of 26
Page 17 of 26 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
370
pattern also changed. Cytoplasm became strongly emissive with unevenly distributed
371
fluorescence. The signal intensity of cytoplasm became similar with that from cell
372
membrane. (Figure 5c, e). Co-staining assays with commercial membrane tracker was
373
performed to verify and differentiate the signal from cell membrane (Figure S-16).
374
Compared with cytosol, cell nucleus displayed weaker fluorescence, indicating lower
375
tendency of Pb2+ to enter nucleus. Further increase of Pb2+ loading to 20 M did not change
376
the fluorescence intensity and distribution (Figure 5d, e). By locating to a variety of
377
subcellular units, Pb2+ interferes with enzyme functions, poisons cellular activity and
378
destroy biological systems.
379 380
Figure 5. (a-d) Fluorescence microscopic images of living cells with GSSH-2TPE (20 M).
381
(a) HeLa cells only treated with GSSH-2TPE. (b-d) Pb2+-preloaded cells treated with
382
GSSH-2TPE. [Pb2+] = 5 M (b), 10 M (c), and 20 M (d). Scale bar: 10 m. (e)
383
Subcellular distribution of Pb2+ responding to exposure dosage based on pixel intensity
384
analysis.
385
Cellular distribution pattern of Pb2+ in different cell lines were examined, including MCF-7
386
(human breast cancer cell line), HepG2 (hepatoblastoma cell line) and HEK293 (from
387
normal human kidney). Although with different origins, similar dose-dependent
388
distribution behavior of Pb2+ was observed (Figure S-17). The consistence results from
389
different cell types denotes the wide applicability of the observed cellular distribution
390
pattern of Pb2+. In cells, metal ions exist either as free ions or bind to biomolecules. For
391
Pb2+, although some Pb2+-binding proteins exhibit strong binding ability and would 17
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
392
compete with GSSH-2TPE, their contents are low. Under the Pb2+ concentrations used in
393
this work, the fluorescence of GSSH-2TPE can be used as the indicator for monitoring Pb2+
394
in cells.
395
The cytotoxicity of GSSH-2TPE was examined with cell viability assay (Figure S-18).
396
Even after 24-h incubation with different concentrations of GSSH-2TPE, HeLa cells
397
remained >95% viability. Such high biocompatibility makes GSSH-2TPE promising for
398
long-term bioanalysis.
399
Conclusion
400
To conclude, this work presents a biomimetic peptide-based fluorescent sensor GSSH-
401
2TPE for tracking Pb2+ in living biosystems. Hard-soft acid theory was successfully
402
employed to guide the molecular design and tune the affinity and selectivity of the targeting
403
performance. The integration of peptide recognition and AIE effect provides desirable
404
sensing features, including specific turn-on response to Pb2+ over 18 different metal ions,
405
rapid binding and signal output, as well as high sensitivity with detection limit as low as
406
1.5 nM. The ability to image Pb2+ in living cells was demonstrated with high
407
biocompatibility, minimal interference from endogeneous biothiols, and no background
408
fluorescence. By tracing the Pb2+ in living cells, GSSH-2TPE can monitor changes in Pb2+
409
levels, biodistribution thus predict possible damage pathways. Future efforts will exert to
410
expand the conjugation chemistry of GSSH to switch the emission wavelength to red or
411
infrared regions with the aim to imaging Pb2+ in vivo. Metal-peptide interactions offer
412
plentiful tailorable platforms for design bioanalytical and biomedical tools.
413 414
ASSOCIATED CONTENT
415
Supporting Information
18
ACS Paragon Plus Environment
Page 18 of 26
Page 19 of 26 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
416
Materials and apparatus. HPLC, MS and NMR Characterization, optimization of the
417
selectivity of GSSH-2TPE, binding kinetics in solution and in cell, estimation of the
418
detection limit and binding affinity, Job’s plot, competitive binding with GSSH, effect of
419
biothiols, effect of Ca2+, Mg2+ and Al3+, cell imaging sensitivity of GSSH-2TPE, co-
420
staining assays with membrane tracker, imaging Pb2+ biodistribution in different cell lines,
421
and cytotoxicity evaluation of GSSH-2TPE. The Supporting Information is available free
422
of charge on the ACS Publications website.
423 424
ACKNOWLEDGMENT
425
This work is supported by grants from National Natural Science Foundation of China
426
(21874141, 21675161, 21621062, and 21705154), Ministry of Science and Technology of
427
China (2015CB856303), Chinese Academy of Sciences, and Youth Innovation Promotion
428
Association CAS (No. 2015027).
429 430
REFERENCES
(1) Bellinger, D. C. Lead Contamination in Flint - An Abject Failure to Protect Public Health. N. Engl. J. Med. 2016, 374 (12), 1101-1103. (2) Pompeani, D. P.; Abbott, M. B.; Steinman, B. A.; Bain, D. J. Lake Sediments Record Prehistoric Lead Pollution Related to Early Copper Production in North America. Environ. Sci. Technol. 2013, 47 (11), 5545-5552. (3) Needleman, H. Lead Poisoning. Annu. Rev. Med. 2004, 55, 209-222. (4) Ferreira de Mattos, G.; Costa, C.; Savio, F.; Alonso, M.; Nicolson, G. L. Lead Poisoning: Acute Exposure of the Heart to Lead Ions Promotes Changes in Cardiac Function and Cav1.2 Ion 19
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Channels. Biophys. Rev. 2017, 9 (5), 807-825. (5) Lidsky, T. I.; Schneider, J. S. Lead Neurotoxicity in Children: Basic Mechanisms and Clinical Correlates. Brain 2003, 126, 5-19. (6) Baghurst, P. A.; McMichael, A. J.; Wigg, N. R.; Vimpani, G. V.; Robertson, E. F.; Roberts, R. J.; Tong, S. L. Environmental Exposure to Lead and Childrens Intelligence at the Age of 7 Years the Port-Pirie Cohort Study. N. Engl. J. Med. 1992, 327 (18), 1279-1284. (7) Cecil, K. M.; Brubaker, C. J.; Adler, C. M.; Dietrich, K. N.; Altaye, M.; Egelhoff, J. C.; Wessel, S.; Elangovan, I.; Hornung, R.; Jarvis, K.; Lanphear, B. P. Decreased Brain Volume in Adults with Childhood Lead Exposure. Plos. Med. 2008, 5 (5), 741-750. (8) Del Toral, M. A.; Porter, A.; Schock, M. R. Detection and Evaluation of Elevated Lead Release from Service Lines: A Field Study. Environ. Sci. Technol. 2013, 47 (16), 9300-9307. (9) Kim, H. N.; Ren, W. X.; Kim, J. S.; Yoon, J. Fluorescent and Colorimetric Sensors for Detection of Lead, Cadmium, and Mercury Ions. Chem. Soc. Rev. 2012, 41 (8), 3210-3244. (10) Domaille, D. W.; Que, E. L.; Chang, C. J. Synthetic Fluorescent Sensors for Studying the Cell Biology of Metals. Nat. Chem. Biol. 2008, 4 (3), 168-175. (11) Saidur, M. R.; Aziz, A. R. A.; Basirun, W. J. Recent Advances in DNA-Based Electrochemical Biosensors for Heavy Metal Ion Detection: A review. Biosens. Bioelectron. 2017, 90, 125-139. (12) Peng, Y.; Huang, H.; Zhang, Y.; Kang, C.; Chen, S.; Song, L.; Liu, D.; Zhong, C. A Versatile MOF-Based Trap for Heavy Metal Ion Capture and Dispersion. Nat. Commun. 2018, 9, 187. (13) Liu, M.; Wang, Y.; Chen, L.; Zhang, Y.; Lin, Z. Mg(OH)(2) Supported Nanoscale Zero Valent Iron Enhancing the Removal of Pb(II) from Aqueous Solution. ACS Appl. Mater. Interfaces 2015, 7 (15), 7961-7969. (14) Gui, S.; Huang, Y.; Hu, F.; Jin, Y.; Zhang, G.; Yan, L.; Zhang, D.; Zhao, R. Fluorescence 20
ACS Paragon Plus Environment
Page 20 of 26
Page 21 of 26 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
Turn-On Chemosensor for Highly Selective and Sensitive Detection and Bioimaging of Al3+ in Living Cells Based on Ion-Induced Aggregation. Anal. Chem. 2015, 87 (3), 1470-1474. (15) Zhang, Q.; Wang, Q.; Xu, S.; Zuo, L.; You, X.; Hu, H.-Y. Aminoglycoside-Based Novel Probes for Bacterial Diagnostic and Therapeutic Applications. Chem. Commun. 2017, 53 (8), 13661369. (16) Wang, J.; Lv, F.; Liu, L.; Ma, Y.; Wang, S. Strategies to Design Conjugated Polymer Based Materials for Biological Sensing and Imaging. Coord. Chem. Rev. 2018, 354, 135-154. (17) He, Q.; Miller, E. W.; Wong, A. P.; Chang, C. J. A Selective Fluorescent Sensor for Detecting Lead in Living Cells. J. Am. Chem. Soc. 2006, 128 (29), 9316-9317. (18) Qian, X.; Xu, Z. Fluorescence Imaging of Metal Ions Implicated in Diseases. Chem. Soc. Rev. 2015, 44 (14), 4487-4493. (19) Chen, X.; Pradhan, T.; Wang, F.; Kim, J. S.; Yoon, J. Fluorescent Chemosensors Based on Spiroring-Opening of Xanthenes and Related Derivatives. Chem. Rev. 2012, 112 (3), 1910-1956. (20) Fan, J.; Hu, M.; Zhan, P.; Peng, X. Energy Transfer Cassettes Based on Organic Fluorophores: Construction and Applications in Ratiometric Sensing. Chem. Soc. Rev. 2013, 42 (1), 29-43. (21) Finney, L. A.; O'Halloran, T. V. Transition Metal Speciation in the Cell: Insights From the Chemistry of Metal Ion Receptors. Science 2003, 300 (5621), 931-936. (22) Milroy, L.-G.; Grossmann, T. N.; Hennig, S.; Brunsveld, L.; Ottmann, C. Modulators of Protein-Protein Interactions. Chem. Rev. 2014, 114 (9), 4695-4748. (23) Salgado, E. N.; Faraone-Mennella, J.; Tezcan, F. A. Controlling Protein-Protein Interactions Through Metal Coordination: Assembly of a 16-Helix Bundle Protein. J. Am. Chem. Soc. 2007, 129 (44), 13374-13375. (24) Degtyar, E.; Harrington, M. J.; Politi, Y.; Fratzl, P. The Mechanical Role of Metal Ions in 21
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Biogenic Protein-Based Materials. Angew. Chem. Int. Ed. 2014, 53 (45), 12026-12044. (25) Faller, P.; Hureau, C.; La Penna, G. Metal Ions and Intrinsically Disordered Proteins and Peptides: From Cu/Zn Amyloid-Beta to General Principles. Acc. Chem. Res. 2014, 47 (8), 22522259. (26) Knight, A. S.; Larsson, J.; Ren, J. M.; Zerdan, R. B.; Seguin, S.; Vrahas, R.; Liu, J.; Ren, G.; Hawker, C. J. Control of Amphiphile Self-Assembly via Bioinspired Metal Ion Coordination. J. Am. Chem. Soc. 2018, 140 (4), 1409-1414. (27) Bergamo, A.; Dyson, P. J.; Sava, G. The Mechanism of Tumour Cell Death by Metal-Based Anticancer Drugs is not Only a Matter of DNA Interactions. Coord. Chem. Rev. 2018, 360, 17-33. (28) Huang, Y.; Ma, Y.; Chen, Y.; Wu, X.; Fang, L.; Zhu, Z.; Yang, C. J. Target-Responsive DNAzyme Cross-Linked Hydrogel for Visual Quantitative Detection of Lead. Anal. Chem. 2014, 86 (22), 11434-11439. (29) Xu, L.; Shen, X.; Hong, S.; Wang, J.; Zhang, Y.; Wang, H.; Zhang, J.; Pei, R. Turn-On and Label-Free Fluorescence Detection of Lead Ions Based on Target-Induced G-Quadruplex Formation. Chem. Commun. 2015, 51 (38), 8165-8168. (30) Li, T.; Dong, S.; Wang, E. A Lead(II)-Driven DNA Molecular Device for Turn-On Fluorescence Detection of Lead(II) Ion with High Selectivity and Sensitivity. J. Am. Chem. Soc. 2010, 132 (38), 13156-13157. (31) Zang, Y.; Lei, J.; Hao, Q.; Ju, H. "Signal-On" Photoelectrochemical Sensing Strategy Based on Target-Dependent Aptamer Conformational Conversion for Selective Detection of Lead(II) Ion. ACS Appl. Mater. Interfaces 2014, 6 (18), 15991-15997. (32) Liu, Y.; Guo, Q.; Qu, X.; Sun, Q. Supramolecularly Assembled Ratiometric Fluorescent Sensory Nanosystem for "Traffic Light"-Type Lead Ion or pH Sensing. ACS Appl. Mater. Interfaces 2018, 10 (36), 30662-30669. 22
ACS Paragon Plus Environment
Page 22 of 26
Page 23 of 26 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
(33) Kerper, L. E.; Hinkle, P. M. Cellular Uptake of Lead is Activated by Depletion of Intracellular Calcium Stores. J. Biol. Chem. 1997, 272 (13), 8346-8352. (34) Puskar, L.; Barran, P. E.; Duncombe, B. J.; Chapman, D.; Stace, A. J. Gas-Phase Study of the Chemistry and Coordination of Lead(II) in the Presence of Oxygen-, Nitrogen-, Sulfur-, and Phosphorus-Donating Ligands. J. Phys. Chem. A 2005, 109 (1), 273-282. (35) Kaupp, M.; Schleyer, P. V. Abinitio Study of Structures and Stabilities of Substituted Lead Compounds - Why is Inorganic Lead Chemistry Dominated by Pb(Ⅱ) But Organolead Chemistry by Pb(IV). J. Am. Chem. Soc. 1993, 115 (3), 1061-1073. (36) Gui, S.; Huang, Y.; Hu, F.; Jin, Y.; Zhang, G.; Zhang, D.; Zhao, R. Bioinspired Peptide for Imaging Hg2+ Distribution in Living Cells and Zebrafish Based on Coordination-Mediated Supramolecular Assembling. Anal. Chem. 2018, 90 (16), 9708-9715. (37) Ali, E. M.; Zheng, Y.; Yu, H.-h.; Ying, J. Y. Ultrasensitive Pb2+ Detection by GlutathioneCapped Quantum Dots. Anal. Chem. 2007, 79 (24), 9452-9458. (38) Chu, W.; Zhang, Y.; Li, D.; Barrow, C. J.; Wang, H.; Yang, W. A Biomimetic Sensor for the Detection of Lead in Water. Biosens. Bioelectron. 2015, 67, 621-624. (39) Qian, Y.; Wang, W.; Wang, Z.; Han, Q.; Jia, X.; Yang, S.; Hu, Z. Switchable Probes: pHTriggered and VEGFR2 Targeted Peptides Screening Through Imprinting Microarray. Chem. Commun. 2016, 52 (33), 5690-5693. (40) Zenk, M. H. Heavy Metal Detoxification in Higher Plants - A Review. Gene 1996, 179 (1), 21-30. (41) Pompella, A.; Visvikis, A.; Paolicchi, A.; De Tata, V.; Casini, A. F. The Changing Faces of Glutathione, a Cellular Protagonist. Biochem. Pharmacol. 2003, 66 (8), 1499-1503. (42) Zhang, P.; Cui, Y.; Anderson, C. F.; Zhang, C.; Li, Y.; Wang, R.; Cui, H. Peptide-Based 23
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Nanoprobes for Molecular Imaging and Disease Diagnostics. Chem. Soc. Rev. 2018, 47 (10), 34903529. (43) He, J.; Gui, S.; Huang, Y.; Hu, F.; Jin, Y.; Yu, Y.; Zhang, G.; Zhang, D.; Zhao, R. Rapid, Sensitive, and In-Solution Screening of Peptide Probes for Targeted Imaging of Live Cancer Cells Based on Peptide Recognition-Induced Emission. Chem. Commun. 2017, 53 (80), 11091-11094. (44) Mei, J.; Leung, N. L. C.; Kwok, R. T. K.; Lam, J. W. Y.; Tang, B. Z. Aggregation-Induced Emission: Together We Shine, United We Soar! Chem. Rev. 2015, 115 (21), 11718-11940. (45) Liang, J.; Tang, B. Z.; Liu, B. Specific Light-Up Bioprobes Based on AIEgen Conjugates. Chem. Soc. Rev. 2015, 44 (10), 2798-2811. (46) Hu, F.; Mao, D.; Kenry; Wang, Y.; Wu, W.; Zhao, D.; Kong, D.; Liu, B. Metal-Organic Framework as a Simple and General Inert Nanocarrier for Photosensitizers to Implement Activatable Photodynamic Therapy. Adv. Funct. Mater. 2018, 28 (19), 1707519. (47) Katz, A. K.; Glusker, J. P.; Beebe, S. A.; Bock, C. W. Calcium Ion Coordination: A Comparison with That of Beryllium, Magnesium, and Zinc. J. Am. Chem. Soc. 1996, 118 (24), 5752-5763. (48) Parr, J. Some recent coordination chemistry of lead(II). Polyhedron 1997, 16 (4), 551-566. (49) Long, G. L.; Winefordner, J. D. Limit of detection. A closer look at the IUPAC definition. Anal. Chem. 1983, 55, 712A–724A. (50) Analytical Methods Committee. Recommendations for the definition, estimation and use of the detection limit. Analyst 1987, 112, 199-204. (51) Niu, X.; Zhong, Y.; Chen, R.; Wang, F.; Liu, Y.; Luo, D. A "Turn-On" Fluorescence Sensor for Pb2+ Detection Based on Graphene Quantum Dots and Gold Nanoparticles. Sensor. Actuat. BChem. 2018, 255, 1577-1581. (52) Fu, C.; Xu, W.; Wang, H.; Ding, H.; Liang, L.; Cong, M.; Xu, S. DNAzyme-Based Plasmonic Nanomachine for Ultrasensitive Selective Surface-Enhanced Raman Scattering Detection of Lead Ions via a Particle-on-a-Film Hot Spot Construction. Anal. Chem. 2014, 86, 11494-11497. 24
ACS Paragon Plus Environment
Page 24 of 26
Page 25 of 26 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
(53) Huang, P.-J. J.; Liu, J. Sensing Parts-per-Trillion Cd2+, Hg2+, and Pb2+ Collectively and Individually Using Phosphorothioate DNAzymes. Anal. Chem. 2014, 86 (12), 5999-6005. (54) Shi, X.; Gu, W.; Peng, W.; Li, B.; Chen, N.; Zhao, K.; Xian, Y. Sensitive Pb2+ Probe Based on the Fluorescence Quenching by Graphene Oxide and Enhancement of the Leaching of Gold Nanoparticles. ACS Appl. Mater. Interfaces 2014, 6 (4), 2568-2575. (55) Yun, W.; Cai, D.; Jiang, J.; Zhao, P.; Huang, Y.; Sang, G. Enzyme-free and label-free ultrasensitive colorimetric detection of Pb2+ using molecular beacon and DNAzyme based amplification strategy. Biosens. Bioelectron. 2016, 80, 187-193. (56) Morales, K. A.; Lasagna, M.; Gribenko, A. V.; Yoon, Y.; Reinhart, G. D.; Lee, J. C.; Cho, W.; Li, P.; Igumenova, T. I. Pb2+ as Modulator of Protein-Membrane Interactions. J. Am. Chem. Soc. 2011, 133 (27), 10599-10611.
25
ACS Paragon Plus Environment
ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Table of Contents
26
ACS Paragon Plus Environment
Page 26 of 26