Black Carbon Emissions in Chinese Cities Based ... - ACS Publications

Oct 13, 2015 - ABSTRACT: Black carbon (BC) emissions from heavy-duty diesel vehicles (HDDVs) are rarely continuously measured using portable emission ...
0 downloads 0 Views 639KB Size
Subscriber access provided by UNIV OF WATERLOO

Article

Characteristics of On-road Diesel Vehicles: Black Carbon Emissions in Chinese Cities Based on Portable Emissions Measurement Xuan Zheng, Ye Wu, Jingkun Jiang, Shaojun Zhang, Huan Liu, Shaojie Song, Zhenhua Li, Xiaoxiao Fan, Lixin Fu, and Jiming Hao Environ. Sci. Technol., Just Accepted Manuscript • DOI: 10.1021/acs.est.5b04129 • Publication Date (Web): 13 Oct 2015 Downloaded from http://pubs.acs.org on October 13, 2015

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

Environmental Science & Technology is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 29

Environmental Science & Technology

Characteristics of On-road Diesel Vehicles: Black Carbon Emissions in Chinese Cities Based on Portable Emissions Measurement Xuan Zheng1, Ye Wu1,

2,*

, Jingkun Jiang1, 2, Shaojun Zhang3, Huan Liu1, 2, Shaojie Song4,

Zhenhua Li1, Xiaoxiao Fan1, Lixin Fu1, 2, Jiming Hao1, 2 1. School of Environment, State Key Joint Laboratory of Environment Simulation and Pollution Control, Tsinghua University, Beijing 100084, P. R. China. 2. State Environmental Protection Key Laboratory of Sources and Control of Air Pollution Complex, Beijing 100084, P. R. China 3. Department of Mechanical Engineering, University of Michigan, Ann Arbor, Michigan 48109, U.S.A. 4. Department of Earth, Atmospheric and Planetary Sciences, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139, U.S.A. *Corresponding author. Phone: +86-10-62796947; Fax: +86-10-62773597; E-mail: [email protected]

1

ACS Paragon Plus Environment

Environmental Science & Technology

1

Page 2 of 29

ABSTRACT

2

Black carbon (BC) emissions from heavy-duty diesel vehicles (HDDVs) are rarely

3

continuously measured using portable emission measurement systems (PEMSs). In this

4

study, we utilize a PEMS to obtain real-world BC emission profiles for twenty-five

5

HDDVs in China. The average fuel-based BC emissions of HDDVs certified according to

6

Euro II, III, IV, and V standards are 2224 ± 251 mg kg-1, 612 ± 740 mg kg-1, 453 ± 584

7

mg kg-1, and 152 ± 3 mg kg-1, respectively. Notably, HDDVs adopting mechanical pump

8

engines had significantly higher BC emissions than those equipped with electronic

9

injection engines. Applying the useful features of PEMSs, instantaneous BC emissions

10

can be related to driving conditions using an operating mode binning methodology, and

11

the average emission rates for Euro II to Euro IV diesel trucks can be constructed. From

12

a macroscopic perspective, we observe that average speed is a significant factor affecting

13

BC emissions and is well correlated with distance-based emissions (R2=0.71). Therefore,

14

the average fuel-based and distance-based BC emissions on congested roads are 40% and

15

125% higher than those on freeways. These results should be taken into consideration in

16

future emission inventory studies.

17

1. INTRODUCTION

18

Because of China’s rapid motorization, fine particulate matter (PM2.5) and gaseous

19

precursors (e.g., nitrogen oxides and hydrocarbons) emitted from gasoline and diesel

20

vehicles have significantly contributed to urban air pollution

21

light-duty gasoline vehicles (LDGVs), primary PM2.5 emissions from heavy-duty diesel

22

vehicles (HDDVs) can be 1-2 orders of magnitude higher [5-7]. Among various species of

23

diesel particulate matter (DPM), black carbon (BC) is a key component contributing

24

36-90% of the mass emitted by HDDVs without advanced after-treatment devices.

25

However, the fraction of BC in DPM can be significantly reduced by diesel particle filters

26

(DPFs), which have been commercially adopted by new diesel vehicles in the U.S. and

27

Europe [8-11]. In terms of total climate forcing (e.g., +1.1 W m−2, as reported by Bond et al.

28

[12]

29

through cloud, snow and sea-ice processes), BC is identified as the second most

[1-4]

. Compared with

), including direct radioactive forcing and semi-direct and indirect effects (e.g., effects

2

ACS Paragon Plus Environment

Page 3 of 29

Environmental Science & Technology

30

significant anthropogenic emission, after carbon dioxide (CO2) [12-14]. In addition, BC has

31

been recognized as an essential indicator of diesel exhaust in carcinogenicity studies,

32

supporting a positive association between exposure to diesel engine exhaust and cancer

33

risk [15, 16]. These well-documented properties and impacts of BC strongly motivated us to

34

measure real-world BC emissions from HDDVs.

35

BC emissions from HDDVs have been evaluated worldwide primarily through

36

laboratory dynamometer testing and remote sensing measurements using tunnel, plume

37

chasing or tent-like exhaust measurement systems

38

challenges remain regarding the accurate measurement of BC emissions from HDDVs.

39

For example, in dynamometer tests, potential uncertainties may result from the weak

40

representativeness of test conditions (e.g., test cycles). Additionally, in remote sensing

41

measurements, despite their ability to capture large-sized samples, the test duration is

42

usually relatively short (ranging from a few seconds for tunnel studies or a few minutes

43

for road chasing to hours or more for portable emission measurement systems (PEMSs)).

44

Therefore, such approaches may not be able to adequately reflect the complexity of

45

traffic conditions and provide statistical evidence for high emitters

46

noting that in an effort to overcome the limitations of dynamometer tests and specifically

47

address the significant off-cycle exceedances, on-board PEMSs have been employed in

48

establishing regulatory test protocols in several developed countries (e.g., the U.S. and

49

Europe)

50

pollutants and fuel consumption and were only recently extended to particle mass or

51

particle number [25-29]. To date, PEMS measurements of second-by-second BC emissions

52

for HDDVs worldwide have been rare. China has always closely followed advanced

53

international experiences in vehicle emission control

54

PEMS protocols are currently being formulated. In addition to existing measurement

55

challenges, severe air pollution problems and lax supervision of the diesel vehicle market

56

have created a strong need for more domestic emissions measurements, and advanced

57

PEMS instruments can be used to investigate in-use BC emissions from HDDVs and the

58

real-world impacts of operating conditions.

59

[23, 24]

[17-19]

. Nevertheless, numerous

[20-22]

. It is worth

. However, previous PEMS tests were typically focused on gaseous

[4]

, and national HDDV-specific

In this study, we develop a new PEMS platform by integrating on-board instruments 3

ACS Paragon Plus Environment

Environmental Science & Technology

60

to allow the continuous monitoring of BC emissions for HDDVs. Twenty-five HDDVs

61

that are declared to comply with Euro II to Euro V emission standards were tested under

62

various traffic conditions in China. Although the number of vehicle tested is small

63

compared with remote sensing studies, the PEMS approach enables (1) the evaluation of

64

real-world emissions from HDDVs over entire trip lengths, (2) the elucidation of

65

instantaneous BC emission rates by operating mode, and (3) the quantification of impacts

66

due to transient driving conditions (e.g., vehicle speed change). The advantages of the

67

PEMS allow us to report useful data and provide insightful suggestions to researchers and

68

policy makers.

69

2. METHODOLOGY

70

2.1. The PEMS platform

71

Our PEMS sampling system consisted of an exhaust flow meter, a global position

72

system (GPS) receiver, a gas analyzer, an air compressor, an air filtration and drying unit, a

73

dilution system and a BC detector (see Figure 1). The exhaust flow meter (Model EcoStar,

74

Sensors Inc., U.S.) was used to record real-time exhaust volume data. The GPS receiver

75

was employed to obtain instantaneous vehicle speed and location. The air filtration and

76

drying unit was used to ensure that the dilution air was dry and particle free. The dilution

77

system (Model FPS4000, Dekati Ltd, Finland) consisted of an ejector dilution device able

78

to heat the exhaust gas to 350 °C in the mixing box to avoid water and volatile organic

79

compound condensation. The exhaust gas passed through a hose from the exhaust pipe to

80

the platform; to maintain the gas temperature and effectively reduce particle loss during

81

transmission, the hose was constructed of high temperature plastics. A portion of the

82

exhaust gas was sampled directly by the gas analyzer, and the remaining exhaust was

83

routed through the dilutor to the BC detector.

84

Second-by-second CO2 and CO emission rates were measured by a gas analyzer

85

monitor (Model EcoStar, Sensors Inc., U.S.) from the full-flow sampling exhaust before

86

the dilution process (see Figure 1) using a non-dispersive infrared (NDIR) analyzer. BC

87

mass concentrations were measured using an Aethalometer (Model AE-51, Magee

88

Scientific, U.S.). The flow rate of the BC measurement was 100 ml min-1, with time 4

ACS Paragon Plus Environment

Page 4 of 29

Page 5 of 29

Environmental Science & Technology

89

resolutions of 1 min and 1 s. Second-by-second BC concentration data were collected

90

from 19 diesel trucks in Beijing after a software update for the Aethalometer in late 2014;

91

for previously tested HDDVs, we only collected minute-by-minute BC profiles (see

92

Table S1).

93

2.2. Tested vehicles and routes

94

On-road BC emissions tests based on the PEMS platform were conducted in two

95

Chinese cities, Beijing and Macao, from 2013 to 2015. We recruited 25 HDDVs,

96

including 23 heavy-duty diesel trucks (HDDTs, gross vehicle weight over 12 t) and 2

97

diesel buses; detailed vehicle information is listed in Table S1. The test vehicles were

98

declared by their manufacturers to comply with Euro II to Euro V (i.e., equivalent to

99

China II to China V) emission standards. Currently, HDDVs complying with Euro III and

100

Euro IV standards account for a major portion of the total diesel fleet because the Euro V

101

standard has been only adopted in public fleets (e.g., public transit buses) for a limited

102

number of cities (e.g., Beijing)

103

(i.e., Vehicle ID #1, see Table S1), all the remaining 24 vehicles were manufactured in

104

China. The numbers of sampled vehicles for the Euro III and Euro IV categories were

105

eleven and nine, an adequate sampling for PEMS studies.

[30]

. In this study, except for one 1998 model year truck

106

Prior to road tests, we carefully checked the vehicle labels, engine types and

107

post-treatment devices and compared the data with the corresponding type-approval

108

information provided by China’s authority in charge of vehicle emission control.

109

However, it should be noted that many local environmental protection agencies do not

110

strictly enforce type-approval conformity during the selling process. For example, we

111

found that one diesel truck (Vehicle ID #23) manufactured to meet the Euro IV standard

112

employed a mechanical pump engine, which is a typical engine type for pre-Euro III

113

emission standards and should not be adopted to meet the stringent Euro IV emission

114

limit (e.g., for PM, 0.02 g kWh-1 under the steady test cycle). Furthermore, none of the

115

tested vehicles, including two Euro V HDDVs, were equipped with a DPF; Beijing will

116

not require the application of DPFs until 2016, when ultra-low sulfur diesel is expected

117

to be delivered to the municipal area and neighboring regions (e.g., Hebei Province and

118

Tianjin Municipal City) [31, 32]. 5

ACS Paragon Plus Environment

Environmental Science & Technology

119

The sample routes in Beijing and Macao can be divided into two road

120

categories—congested roads and freeways (see Figure S1)—representing various driving

121

conditions. The total tested distance and average speed by road category for each vehicle

122

are presented in Table S2. The tested vehicles were cycled two to four times along the

123

sampling routes in Beijing and Macao to ensure a typical continuous test duration of

124

nearly 2 hours for each sample. The diesel fuels used in our tests were obtained directly

125

from retail fuel stations, and the sulfur contents were lower than 15 ppm in both cities.

126

2.3. Quality assurance and control

127

It should be noted that there is no reference method to measure BC emissions for

128

HDDVs. Indeed, the use of the PEMS method is rather novel for this applications. Thus,

129

a series of quality control and assurance processes were carefully considered for the key

130

experimental and data analysis procedures.

131

Using GPS-derived vehicle speeds, which could be uncertain because of the

132

substantial signal noise in building-dense areas, we compared second-by-second speed

133

profiles for two Euro IV trucks determined by the GPS receiver and the on-board

134

diagnostic (OBD) system (required since the Euro IV stage in China). The comparison

135

results demonstrate that the GPS receiver was able to provide sufficiently accurate speed

136

data (relative discrepancy within ±2%, see Figure S2 as an example).

137

For the exhaust dilution and sampling system, the dilution rates of our measurement

138

range from “100:1” to “120:1” to match the Aethalometer’s range of 0 to 1 mg m-3 and

139

avoid instantaneous over-loading. Furthermore, we chose an appropriate caliber hose to

140

ensure that the exhaust gases of all samples were in a completely turbulent state

141

(Re~24000, see Supporting Information). Thus, the BC concentration in the sampling

142

flow was representative of the entire exhaust flow.

143

Because the Aethalometer neglects any influence of particle light scattering, previous

144

studies have already reported that BC concentrations might be erroneously estimated

145

when using this instrument

146

Aethalometer were adjusted using equations (1) and (2) [33].

[33]

. Therefore, in this study, the raw data detected by the

6

ACS Paragon Plus Environment

Page 6 of 29

Page 7 of 29

Environmental Science & Technology

BC o (1) (0.88Tr + 0.12)

147

BC =

148

 − ATN  Tr = exp    100 

(2)

149

where BCo and BC are the originally measured and corrected BC concentrations,

150

respectively, [ng m-3], Tr is the filter transmission, and ATN is the absorbance

151

parameter,

152

Aethalometer-derived BC concentrations have been demonstrated to exhibit good

153

correlations with elementary carbon concentration values measured using thermal–

154

optical analysis (TOA) methods

155

vehicle emissions measurement studies [20, 21]. We also determined the agreement for BC

156

emissions estimated using 1-min and 1-s profiles from two paralleled and pre-calibrated

157

Aethalometers for 19 vehicle samples (see Figure S3 as one example) and quantified the

158

discrepancies in BC emissions between two time resolutions: 7±7%. For each vehicle

159

sample, we carefully modified the time alignment among the various instruments (i.e.,

160

the gas analyzer EcoStar vs. the Aethalometer AE-51) to minimize potential mismatch

161

between instantaneous data sources.

162

2.4. Emission calculations and operating mode binning methodology

which

is

directly

obtained

[33, 34]

by

the

Aethalometer.

Corrected,

, and this correction has been commonly applied in

163

Based on continuous second-by-second emission profiles for BC and gaseous

164

species combined with simultaneous driving condition data, we were able to estimate the

165

distance and fuel consumption specifically related to BC emissions (i.e., units in mg km-1

166

and mg kg-1), as equations (3) and (4) illustrate: n

∑ BC ⋅V ⋅ DR i

167

EFdis =

i

n

∑S

i

×106

i =1

(3)

i

i =1

168

EFfuel

n   BCi ⋅Vi ⋅ DRi ∑   i =1  = 103 ⋅ wc ⋅  n  (12 / 44 ⋅ CO +12 / 28 ⋅ CO ) 2i i  ∑  i =1 

7

ACS Paragon Plus Environment

(4)

Environmental Science & Technology

169

where EFdis is the distance-based BC emissions [mg km-1], BCi is the corrected BC

170

concentration for episode i (minute or second) [ng m-3], Vi represents the exhaust gas

171

volume for episode i [m-3], DRi represents the instantaneous dilution ratio for episode i,

172

Si is the distance traveled during episode i [km], EFfuel is the fuel-based BC emissions

173

[mg kg-1], wc represents the mass fraction of carbon in the fuel (0.87 for diesel), CO2i is

174

the CO2 mass of emissions for minute i [g], and COi is the CO mass of emissions [g]. We

175

did not include hydrocarbons in equation (4) because hydrocarbon emissions were not

176

derived for all samples and because the carbon mass contribution from hydrocarbon

177

emissions should be minor (