Catalytic Reforming of Volatiles from Biomass Pyrolysis for Hydrogen

Mar 8, 2017 - Citation data is made available by participants in Crossref's Cited-by Linking service. For a more comprehensive list of citations to th...
0 downloads 0 Views 3MB Size
Subscriber access provided by HACETTEPE UNIVERSITESI KUTUPHANESI

Article

Catalytic reforming of volatiles from biomass pyrolysis for hydrogen-rich gas production over limonite ore Xiao-Yan Zhao, Jie Ren, Jing-Pei Cao, Fu Wei, Chen Zhu, Xing Fan, Yun-Peng Zhao, and Xian-Yong Wei Energy Fuels, Just Accepted Manuscript • DOI: 10.1021/acs.energyfuels.7b00005 • Publication Date (Web): 08 Mar 2017 Downloaded from http://pubs.acs.org on March 14, 2017

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

Energy & Fuels is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

1

Catalytic reforming of volatiles from biomass pyrolysis for hydrogen-rich gas production over

2

limonite ore

3

Xiao-Yan Zhao, Jie Ren, Jing-Pei Cao*, Fu Wei, Chen Zhu, Xing Fan, Yun-Peng Zhao, Xian-Yong

4

Wei

5

Key Laboratory of Coal Processing and Efficient Utilization (Ministry of Education), China

6

University of Mining & Technology, Xuzhou 221116, Jiangsu, China

7

Abstract

8

The feasibility of using natural limonite ore for catalytic cracking of biomass pyrolysis volatiles

9

was investigated to study the effects of catalyst treated method, temperature, space velocity, and

10

atmosphere on carbon conversion and gas yields. Limonite ore has a certain catalytic activity in the

11

cracking of tarry material and the activity could be significantly enhanced after reduction with H2.

12

When the reduced limonite was used, the gas yield increased to the maximum value of 41.6 mmol/g

13

and the yield of carbon in water soluble tar decreased to a negligible value (0.7%) by increasing the

14

reforming temperature from 400 to 650 oC. The reforming activity of the reduced limonite is

15

comparable with the commercial Ni/Al2O3 catalyst. Steam can inhibit carbon deposition on limonite

16

and give a H2-rich gas (H2 content 70.4 vol.%) in a high yield of 74.1 mmol/g at 700 oC. Lower

17

space velocity improve carbon conversion and gas production. The study revealed the possibility of

18

using limonite as an alternative and attractive catalyst to the commercial precious metal catalysts for

19

catalytic gasification of biomass in low temperature.

20

Keywords: Biomass; Catalytic reforming; Gasification; Limonite; Volatiles

21

1. Introduction

22

With the depletion of fossil fuels and increasing concern over pollution and its effects on

23

climate change, biomass has attracted more attention as a valuable energy source.1 Biomass

24

utilization is recognized as one of the most promising solutions for current energy and * Corresponding author. Tel./fax: +86 516 83591059. E-mail address: [email protected]; [email protected]; [email protected] (J. P. Cao)

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 28

25

environmental problems.2 Thermochemical conversion of biomass, such as combustion, gasification

26

and pyrolysis, have been developed.3-5 Among that, gasification of biomass for combustible gas and

27

H2-rich gas production was regarded to be the most promising process due to its high conversion

28

efficiency.6 The gaseous products can be widely used as fuel for power generation or feedstock for

29

chemical synthesis and fuel cells.7

30

However, biomass gasification is still in the developing stage due to some challenges. The most

31

severe problem is dealing with the tar formed during gasification.8-11 As a sticky material, biomass

32

tar usually condenses in the low-temperature zone of the downstream applications and blocks the

33

narrow pipeline, which makes troubles for either gasification process or the subsequent utilization

34

of gasous product.12 Among the approaches for tar reduction, catalytic gasification is one of the

35

most effective methods of tar elimination even at moderate conditions.13-16 Catalyst can efficiently

36

promote the tar cracking, and improve the gas production, such as CaO/Al2O3,17 zeolite catalyst

37

and transition metal based catalysts, especially for nickel ones,19-21 which were proven to be active

38

for tar decomposition even at a relatively low temperature.22,23 Nevertheless, Ni is a noble metal,

39

using the expensive commercial Ni catalysts for biomass gasificaiton is economically infeasible.

18

40

Iron oxide was employed as a catalyst for tar cracking. Uddin et al.24 found that iron oxide

41

(Fe2O3) was transformed to Fe3O4 during the gasification reaction, and exhibited a certain catalytic

42

activity for gasification of biomass tar. The iron oxide caused the cracking of the tar and affected

43

the composition and yield of the gaseous products. Specific surface area (SSA) of the iron oxide

44

was the main contributors to the tar cracking. Li et al.25 studied the catalytic behavior of Indonesian

45

natural limonite ore for decomposition of coal volatile. The low cost and high activity limonite ore

46

showed a fine surface structure and a high SSA and was active for hydropyrolysis of coal volatiles

47

between 600 and 800 oC. Matsumura et al.26 tested Australian natural limonite, which contains

48

about 30% mud and 57% iron brown spots, for the decomposition of the asphaltenes and found that

49

the limonite was more active for asphaltenes cracking than Ni/Mo at the same temperature.

ACS Paragon Plus Environment

Page 3 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

50

Nordgreen et al.27 studied the hematite as catalyst for gasification of birch in fluidized bed and

51

found that the tar cracked completely when the temperature reached 900 oC. He et al.28 investigated

52

the catalytic cracking of pyrolytic vapors of low-rank coal over limonite ore and found that limonite

53

was active for tar cracking. Limonite with abundant resource, low price and easy disposal is thought

54

to be an attractive alternative to the commercial metal catalysts.25,26

55

In this study, the physical and chemical properties of limonite samples treated under different

56

conditions were studied. The feasibility of using limonite ore for reforming of biomass volatile at

57

low temperature was carried out in a two-stage fixed-bed reactor. The effects of catalyst, space

58

velocity (SV), temperature, atmosphere of the carbon conversion and gas yield were significantly

59

investigated.

60

2. Materials and Methods

61

2.1. Materials

62

The corncob was used as the biomass sample, and the sample preparation and main

63

characteristics were described in detail previously.29 The proximate and ultimate analyses of the

64

corncob was listed in Table S1 (as shown in the Supporting Information). The catalyst used is an

65

Indonesian limonite, which is provided by Kobe Steel, Ltd. A commercial Ni/Al2O3, which was

66

proven to be active for tar cracking, and sand were used for catalytic and non-catalytic comparison.

67

All the catalysts were prepared to be 1-2 mm particle size before use. The limonite was

68

characterized by X-Ray Fluorite Spectroscopy, X-ray diffraction (XRD), transmission electron

69

microscope (TEM), thermogravimetric (TG) analyzer and adsorption apparatus. The preparation

70

and characterization of materials in detail was presented in Supporting Information.

71

2.2. Catalytic reforming and products analysis

72

The catalytic volatiles reforming experiment was performed in a two-stage fixed-bed quartz

73

reactor as reported previously.29 The reforming temperature was set at a temperature range of

74

400-750 oC and the SV was set as 2400, 3600 and 7200 h-1 by packed catalyst heights of 3, 2 and 1

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 4 of 28

75

cm. About 1 g corncob was put on the first stage and prescribed amount of catalyst was put on the

76

second stage. Before the temperature of the first stage was raised from 30 oC to 900 oC, the second

77

stage of the quartz reactor was firstly heated to 650 oC for catalyst reduction by H2 for 1 h and then

78

set prescribed temperature of 400-750 oC and switched to Ar atmosphere for the reaction. For steam

79

catalytic reforming, steam was injected through a single-channel pump as reported.30 The total flow

80

rate and the steam partial pressure were controlled at 120 mL/min and 30 kPa, respectively.

81

Catalytic reforming test under the calcined limonite without H2 reduction was also conducted.

82

The reforming product was cooled in two traps with deionized water at -10 oC. The gaseous

83

products were collected for 1 h in a valved gas sampling bag and analyzed by Shimadzu GC-2014

84

GC/FID and GC/TCD. The gas yield was calculated by Eq. (1). n(x)=(V(total)×y(x))/22.4

85 86 87

(1)

y(x): The volume content of x in gas bag (vol.%); V(x): Total volume of gas in bag (mL); n(x): The yield for x (mmol).

88

A Shimadzu TOC-L analyzer was used to determine the total soluble carbon in deionized water.

89

Tar and carbon deposited (Cdep) on the reactor wall and catalysts were burned out at 800 oC under

90

O2 for 1 h. The gaseous product was collected and the concentration of CO2 was detected by GC to

91

calculate the content of the Cdep. An Elementar vario MACRO cube CHNS elemental determinator

92

was used to analyze the carbon content in char collected in the first stage (Cchar).

93

3. Results and discussion

94

3.1. Characterization of limonite

95

3.1.1. XRD analysis

96

Figure 1a shows the XRD spectra of the limonite raw material (L-RA), the limonite calcined at

97

650 oC for 1 h (L-CA) and the limonite reduced at 650 oC for 1 h (L-RE). It can be found that the

98

main crystalline species detected in raw limonite ore is goethite (FeOOH). For the calcined limonite,

99

the diffraction signal of goethite (FeOOH) was almost diminished completely with increased

ACS Paragon Plus Environment

Page 5 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

100

hematite (Fe2O3) signals, suggesting the conversion of goethite (FeOOH) to hematite (Fe2O3)

101

during the calcined process (Eq. (2)). González et al.31 and Mochizuki et al.32 also reported the

102

conversion of goethite (FeOOH) to hematite (Fe2O3). 2FeOOH → Fe2O3 + H2O

103

(2)

104

XRD analysis showed that the crystalline phase of goethite (FeOOH) transformed into metallic

105

iron rather than hematite (Fe2O3) when the limonite was reduced under H2 atmosphere at 650 oC for

106

1 h, which indicated the catalyst reduction temperature at 650 oC is suitable enough. Figure 1b

107

shows the typical XRD spectra of the raw limonite sample and the thermally treated ones at

108

200-700 oC for 3 h, and it can be concluded that goethite (FeOOH) peaks at 21.3°, 33.3°, 36.7°,

109

53.3° and 59.9° have no change in phase. When the calcination temperature reached to 300 oC, the

110

goethite diffraction peak almost entirely disappeared. At the same time, some new hematite

111

diffraction peaks appeared.33,34 It also can be concluded that the diffraction peak of hematite

112

gradually strengthened with the increase of temperature. The reactivity of natural limonite for tar

113

reforming could further be increased by reduction with H2.35 Therefore, 650 oC was selected as the

114

catalyst reduction temperature in this experiment.

115

3.1.2. TEM analysis

116

TEM images about limonite were recorded after treated at different temperatures of 25, 300,

117

500 and 700 oC. As shown in Figure 2, the acicular should be goethite, the main ingredient in

118

natural limonite, which can be calculated to 10-30 nm diameter of goethite (FeOOH) crystals. There

119

is no significant change in acicular shape after calcination at 300 oC, except for the formation of

120

nanometer pore goethite with diameter of 0.5-3 nm due to water removal and dihydroxylation

121

process at 300 oC. Combined with XRD analysis, it can be concluded that the acicular product is

122

hematite (Fe2O3). The trend is well consistent with previous report.36 After calcination at 500 oC, the

123

nanometer pore became larger in comparison with that treated at 300 oC. The bulk of the hematite

124

was sintered when the calcination temperature increased to 700 oC.

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

125

3.1.3. TG analysis

126

As shown in Figure 3, it can be observed the total mass loss with average value of 15.21 wt.%.

127

The derivative TG (DTG) curve can be resolved into three stages associated to the main weight loss

128

peaks. The first stage occurred below 150 oC interval representing the 2.31 wt.% of weight-loss,

129

which corresponded to the loss of absorbed water of limonite. The second stage of decomposition at

130

150-400 oC, with a weight loss of 10.58 wt.%, was associated to dehydroxylation.37 However,

131

according to the Eq. (2), the conversion of goethite to hematite should have the theoretical weight

132

loss of 10.1%. The phenomenon should be due to the existence of considerable strong interactions

133

between broken bonds and desorption of hydroxylation on goethite surface. This conclusion is in

134

good agreement with the studies of Parfitt et al.,37 Russel et al.,38 and Rochester et al.39 which

135

proved two types of surface hydroxyl group exist in limonite. Above 700 oC, a sharp peak accounts

136

for 2.3% of the total weight loss occurred. This stage can be contributed to desorption of the

137

remanent hydroxyl.

138

3.1.4. SSA and pore size analysis

139

As shown in Figure 4, an obvious change can be found for SSA below 200 oC. When the

140

temperature was increased to 350 oC, the SSA significantly increased to the maximum value of

141

183.1 m2/g, which should be due to the dehydroxylation of goethite and the formation of slit-shaped

142

micropores. The SSA decreased to 72.6 m2/g at 700 oC due to the internal and interparticles

143

sintering, which can be found in XRD and TEM analyses. The presence and change of slit-shaped

144

micropores is in agreement with that mentioned in 3.1.3. As Figure 5 shows, the pore mainly

145

distributed 0.3-20 nm. The peak at 2.9 nm for the raw limonite should be attributed to the

146

micropores arising from the interparticles clearance. After treated at 300 and 400 oC, a strong peak

147

appeared below 1.3 nm for the two samples, which is well analogous to the results reported.34,35 The

148

peak shifts to 3.5 nm when treated the limonite at 400 oC and the intensity becomes weak with the

149

increased temperature. The dramatic increase of SSA should be ascribed to slit-shaped micropores

ACS Paragon Plus Environment

Page 6 of 28

Page 7 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

150

from goethite dehydroxylation. The micropore in the limonite disappeared at 600-700 oC. The

151

uniform mesopores, mainly around 4.5 nm, can provide an excellent environment for volatile

152

reforming. Thus, with the increase of treated temperature, newly formed micropores are easily

153

transformed to mesoporous and macropores, as a result causes the decrease of SSA and increase of

154

pore size.

155

3.2. Catalytic reforming of volatiles over limonite

156

3.2.1. Effect of catalyst

157

The gaseous composition and the H2/CO and CO/CO2 molar ratios are important index for

158

syngas production. As shown in Figures 6 and 7, the gas yield was quite low (13.7 mmol/g) when

159

sand was used at 650 oC, and the H2/CO molar ratio of the gas was 0.85. When the L-CA was used,

160

about 49.8% and 6.1% of carbon were converted to carbon in gas (Cgas) and Cdep, respectively,

161

indicating that the L-CA can promote volatiles reforming and giving a gaseous product with a

162

H2/CO molar ratio of 2.93. L-CA showed a certain activity for tar cracking. These results were well

163

consistent with the reports from Hurley et al.40 However, there was still 1.6% of carbon left in water

164

soluble oil (CWSO) over L-CA during reforming under inert atmosphere. At the same temperature,

165

the gas yield was 41.16 mmol/g (daf) when L-RE was used. Ni/Al2O3 was reported being quite

166

active for tar cracking at 650 oC.16 L-RE has a comparable activity with the commercial Ni/Al2O3.

167

Compared with Ni/Al2O3, L-RE gives a relative lower H2/CO ratio of 1.72 but a higher CO/CO2

168

ratio of 3.31. Compared with Ni/Al2O3, L-RE gives a higher carbon balance of 97.8% and lower

169

CWSO yield, but a higher Cdep yield partly due to the high SSA of limonite shown in Figure 4. Thus,

170

it can be concluded that the L-RE was efficient for corncob volatiles reforming, and the activity is

171

comparable with the commercial Ni/Al2O3. In addition, as listed in Table 1, the limonite ore also

172

contains quite low content of Ni, Cr, Co, CaO and MgO, all these impurities have been reported

173

active for biomass volatiles reforming.16-20 Understanding of the catalytic effects of the impurities in

174

limonite is challenging work and deserves further investigation.

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

175

3.2.2. Effect of SV

176

Generally, the low SV is in favor of catalytic reaction.30 As Figures 6 and 7 display, about 46.3%

177

of carbon was found in Cgas, and the yield of gas reached to 36.22 mmol/g. 9.4% of carbon was

178

converted to Cdep at a SV of 7200 h-1. In addition, 4.6% of carbon was found in WSO. From Figures

179

6 and 7 it can be seen that the gas yield reached to 41.61 mmol/g, and the H2 and CO production

180

reached to 21.65 mmol/g and 12.61 mmol/g, when the SV was decreased to 3600 h−1. It can be

181

found that gasification efficiency was enhanced and Cdep was decreased. No obvious change can be

182

found of the Cgas (42.28 mmol/g) and CWSO when the SV was further decreased to 2400 h-1. Lower

183

SV was in favor of volatiles reforming and gas products formation because of the relatively long

184

residence time, which is well consistent with the report of Uddin et al.24

185

3.2.3. Effect of reforming temperature

186

Catalytic temperature was reported to be the most important factor affecting the activity for

187

volatiles reforming.14 As illustrated in Figures 8 and 9, L-RE gives a gas yield of 1.3 times higher

188

than non-catalytic test at 400 oC. However, the CWSO yield (8.1%) was quite high at 400 oC. The gas

189

yield increased to the maximum value of 41.6 mmol/g when the temperature was ramped to 650 oC.

190

On the other hand, the CWSO yield decreased significantly to a negligible amount of 0.7%. The

191

yields of CH4 and CO2 decreased with increasing temperature and attained to a yield 3.6 and 3.8

192

mmol/g, respectively. On the contrary, the H2 and CO yields increased rapidly. The results indicated

193

that the L-RE is active for reforming of CH4 with CO2 (Eq. (3)). Further raising the temperature to

194

750 oC lead to a slight decrease in the yield of H2 and CO. As mentioned in Figure 4, the SSA of

195

limonite decreased with the increasing temperature, which might cause the decline of the activity.

196

The lower heating value (LHV) of the gaseous products was calculated following previous

197

literature,5 and the result showed that the LHV decreased from 14.6 to 12.8 MJ/m-3 with the

198

temperature rising from 400 to 750 oC. In general, CH4 has the highest heating value in the gaseous

199

products. The decrease of CH4 content leads to a decrease in the LHV of the gaseous products.

ACS Paragon Plus Environment

Page 8 of 28

Page 9 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

200

Moreover, the H2/CO ratio gets a value range around 1.7-1.8 between 650 and 750 oC, which is

201

comparable with the molar ratio of 1.87 over Ni/Al2O3. The trend suggests that the gaseous product

202

from biomass gasification over limonite can be potential candidate for FT synthesis. CH4 + CO2 ↔ 2CO + H2

203 204

(3)

3.2.4. Effect of temperature on catalytic steam reforming

205

Steam as the gasification agent is effective atmosphere for the increase of H2 production.41

206

Figure 10 shows the reaction mechanism of steam reforming. The volatiles will oligomerize and

207

generate Cdep, while steam can dissociate hydroxyl radicals produced at catalyst surface, then react

208

with the volatiles to generate COx and H2. Steam reforming is considered as an efficient method for

209

H2-rich gas production via the reaction of volatiles with steam at temperatures of 650-700 oC. Thus,

210

steam reforming test was investigated over L-RE under a SV of 3600 h-1 and a steam partial

211

pressure of 30 kPa at 400-750 oC.

212

As displayed in Figure 11 and Table 2, steam reforming decomposed most of the tarry materials

213

and gave a high H2 yield via the steam reforming reactions. The H2 content was 59.2 vol.% at 400

214

o

215

Compared with catalytic reforming, steam reforming mainly promotes the decomposition of tarry

216

materials to H2, CO, and small amounts of CO2 below 500 oC. The CWSO yield decreased from 6.9%,

217

a value quite lower than that of catalytic reforming, to a negligible value of 0.3% when the

218

temperature was increased from 400 to 700 oC. In this temperature range, the water-gas shift

219

reactions will produce additional H2 and CO2. The yield of gas significantly increased to a high

220

value of 74.1 mmol/g at 700 oC. There is no obvious change when the temperature further ramped

221

to 750 oC, besides a slightly decrease in CH4 yield to produce H2 and CO2 (Eq. (4)).

222

C and increased to a level of 70.4-71.0 vol.% when the temperature raised to 650-750 oC.

CH4 + 2H2O ↔ 4H2+ CO2

(4)

223

Steam reforming of biomass and waste over Ni/Al2O3 also gave a higher H2 content.30 The

224

temperature range of 650-750 oC is suitable for catalytic steam reforming, which gives a high gas

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

225

yield of 71.35-74.38 mmol/g. Similar with that obtained over Ni/Al2O3, the H2/CO molar ratio over

226

L-RE is about 3.64-3.82 at 650-750 oC. In addition, the highest molar ratio of CO/CO2 reached to

227

2.46 at this temperature range. A higher molar ratio of CO/CO2 will have a stronger influence on the

228

calorific content of the gaseous product. Therefore, limonite can be used as an economical and

229

alternative catalyst for steam gasification of biomass to produce hydrogen-rich gas at relatively low

230

temperature.

231

As Figures 9 and 12 show, no obvious change can be found of the Cdep yield below 600 oC

232

between catalytic reforming and steam reforming. In general, carbon and water were almost

233

non-reactive below 800 oC without catalyst.42 The Cdep yield decreased significantly to 8.0% at 600

234

o

235

can promote this reaction at 600 oC.30 In this study, Steam reforming of Cdep above 600 oC was

236

ascribed to the presence of metal Fe catalyst. In summary, steam reforming of biomass volatiles

237

over limonite is favorable for not only producing tar-free H2-rich gas, but also avoiding Cdep on

238

catalyst, at a relatively low temperature range of 650-750 oC.

239

4. Conclusions

C and further decreased below 3% when raising the temperature to 700-750 oC. Ni-based catalyst

240

The natural limonite ore can be converted to a porous Fe-based catalyst after reduction at 650 oC

241

and significantly promotes biomass volatiles reforming and produces a tar-free synthetic gas in a

242

high yield of 41.6 mmol/g of 650 oC. Steam introduction significantly promotes the gasification of

243

Cdep and gives a H2-rich gas (up to 70.4 vol.%) in a high yield of 74.1 mmol/g. Catalytic reforming

244

and steam reforming of biomass volatiles significantly depends on temperature, SV and atmosphere.

245

With abundant resource, low price and easy disposal of spent catalyst, limonite is thought to be an

246

attractive and alternative to the commercial metal catalysts. Further work will focus on other impact

247

parameters, such as steam partial pressure and feedstock type, along with assessment of the lifetime.

248

Supporting Information

249

Material suppliers and properties, proximate and ultimate analyses of the samples (Table S1),

ACS Paragon Plus Environment

Page 10 of 28

Page 11 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

250

and preparation and characterization of the catalyst.

251

Acknowledgements

252

This work was subsidized by the Fundamental Research Funds for the Central Universities

253

(China University of Mining & Technology, 2015XKQY05), National Natural Science Foundation

254

of China (Grant 21676292), Natural Science Foundation of Jiangsu Province (Grant BK20151141)

255

and the Priority Academic Program Development of Jiangsu Higher Education Institutions.

256

References

257

(1) Asadullah, M.; Tomishige, K.; Fujimoto, K. Catal. Commun. 2001, 2, 63-68.

258

(2) Chan, F. L.; Tanksale, A. Renew. Sust. Energ. Rev. 2014, 38, 428-438.

259

(3) Wang, Y.; Li, X.; Mourant, D.; Gunawan, R.; Zhang, S.; Li, C. Z. Energy Fuels 2012, 26, 241–

260 261 262 263 264 265 266

247. (4) Fan, X.; Zhu J. L.; Zheng, A. L.; Wei, X. Y.; Zhao, Y. P.; Cao, J. P.; Lu, Y.; Chen, L.; You, C. Y. J. Anal. Appl. Pyrol. 2015, 115, 16-23. (5) Cao, J. P.; Xiao, X. B.; Zhang, S. Y.; Zhao, X. Y.; Kazuyoshi, S.; Ogawa, Y.; Wei, X. Y.; Takarada, T. Bioresour. Technol. 2011, 102, 2009-2015. (6) Liu, H. B.; Chen, T. H.; Chang, D. Y.; Chen, D.; He, H. P.; Frost, R. L. J. Mol. Catal. A-Chem. 2012, 363, 304-310.

267

(7) Bridgwater, A. V. Fuel 1995, 74, 631-653.

268

(8) Asadullah, M.; Miyazawa, T.; Ito, S.; Kunimori, K.; Tomishige, K. Appl. Catal. A-Gen. 2003,

269

246, 103-116.

270

(9) Devi, L.; Ptasinski, K. J.; Janssen, F. J.G. Biomass Bioenergy 2003, 24, 125-140.

271

(10) Caballero, M. A.; Corella, J.; Aznar, M. P.; Gil, J. Ind. Eng. Chem. Res. 2000, 39, 1143-1154.

272

(11) Cao, J. P.; Huang, X. Zhao, X. Y.; Wang, B. S.; Meesuk, S.; Sato, K.; Wei, X. Y.; Takarada,

273 274

T. Int. J. Hydrogen Energy 2014, 39, 9193-9199. (12) Asadullah, M. Renew. Sust. Energ. Rev. 2014, 40, 118-132.

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

275

(13) Gao, N.; Wang, X.; Li, A.; Wu, C. F.; Yin, Z. F. Fuel Process. Technol. 2016, 148, 380-387.

276

(14) Olivares, A.; Aznar, M. P.; Caballero, M. A.; Gil, J.; Frances, E.; Corella, J. Ind. Eng. Chem.

277

Res. 1997, 36, 5220-5226.

278

(15) Asadullah, M. Ito, S.; Kunimori, K.; Yamada, M.; Tomishige, K. J. Catal. 2002, 208, 255-259.

279

(16) Cao, J. P.; Huang, X.; Zhao, X. Y.; Wei, X. Y.; Takarada, T. Fuel 2015, 140, 477-483.

280

(17) Tang, R. Y.; Tian, Y. Y.; Qiao, Y. Y.; Zhao, G. M.; Zhou, H. F. Energy Fuels 2016, 30,

281 282 283 284 285 286 287

8855-8862. (18) Buchireddy, P. R.; Bricka, R. M.; Rodriguez, J.; Holmes, W. Energy Fuels 2010, 24, 2707-2715. (19) Moud, P. H.; Andersson, K. J.; Lanza, R.; Engvall, K. Appl. Catal. B-Environ. 2016, 190, 137-146. (20) Aznar, M. P.; Caballero, M. A.; Gil, J.; Martín, J. A.; Corella, J. Ind. Eng. Chem. Res. 1998, 37, 2668-2680.

288

(21) Rostrupnielsen, J. R.; Hansen, J. H. B. J. Catal. 1993, 144, 38-49.

289

(22) Xu, C. C.; Donald, J.; Byambajav, E.; Ohtsuka, Y. Fuel 2010, 89, 1784-1795.

290

(23) Cao, J. P.; Shi, P.; Zhao, X. Y.; Wei, X. Y.; Takarada, T. Energy Fuels 2014, 28, 2041-2046.

291

(24) Uddin, M. A, Tsuda, H.; Wu, S.; Sasaoka, E. Fuel 2008, 87, 451-459.

292

(25) Li, L.; Morishita, K.; Takarada, T. Fuel 2007, 86, 1570-1576.

293

(26) Wang, Y.; Jiang, L.; Hu, S.; Su, S.; Zhou, Y. B.; Xiang, J.; Zhang, S.; Li, C. Z. Fuel Process.

294

Technol. 2017, 158, 180-190.

295

(27) Nordgreen, T.; Liliedahl, T.; Sjöström, K. Fuel 2006, 85, 689-694.

296

(28) He, L.; Li, S. G.; Lin, W. G. Energy Fuels 2016, 30, 6984-6990.

297

(29) Wang, B. S.; Cao, J. P.; Zhao, X. Y.; Bian, Y.; Song, C.; Zhao, Y. P.; Fan, X.; Wei, X. Y.;

298

Takarada, T. Fuel Process. Technol. 2015, 136, 17-24.

ACS Paragon Plus Environment

Page 12 of 28

Page 13 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

299 300

Energy & Fuels

(30) Cao, J. P.; Shi, P.; Zhao, X. Y.; Wei, X. Y.; Takarada, T. Fuel Process. Technol. 2014, 123, 34-40.

301

(31) González, G.; Sagarzazu, A.; Villalba, R. Mater. Res. Bull. 2000, 35, 2295-2308.

302

(32) Mochizuki, Y.; Nishio, M.; Ma, J.; Tsubouchi, N.; Akiyama, T. Energy Fuels 2016, 30,

303

6233-6239.

304

(33) Goss, C. J. Mineral. Mag. 1987, 51, 437-451.

305

(34) Rendon, J. L.; Cornejo, J.; de Arambarri, P.; Serna, C. J. J. Colloid Interf. Sci. 1983, 92,

306

508-516.

307

(35) Naono, H.; Nakai, K.; Sueyoshi, T.; Yagi, H. J. Colloid Interf. Sci. 1987, 120, 439-450.

308

(36) Liu, H. B.; Chen, T. H.; Zou, X. H.; Qing, C. S.; Frost, R. L. Thermochim. Acta 2013, 568,

309

115-121.

310

(37) Parfitt, R. L.; Russell, J.D.; Farmer, V. C. J. Chem. Soc., Faraday Trans. 1976, 72, 1082-1087.

311

(38) Russell, J. D.; Parfitt, R. L.; Fraser, A. R.; Farmer, V. C. Nature 1974, 248, 220-221.

312

(39) Rochester, C. H.; Topham, S. A. J. Chem. Soc., Faraday Trans. 1979, 75, 591-602.

313

(40) Hurley, S.; Xu, C. C.; Preto, F.; Shao, Y.; Li, H.; Wang, J.; Tourigny, G. Fuel 2012, 91,

314

170-176.

315

(41) Garcia, L.; Salvador, M. L.; Arauzo, J.; Bilbao, R. Energy Fuels 1999, 13, 851-859.

316

(42) Takarada, T.; Tamai, Y.; Tomita, A. Fuel 1985, 64, 1438-1442.

317

Figure captions

318

Table 1 Chemical composition of the Indonesian limonite (expressed as wt.% of metal oxides).

319

Table 2 The gas yields (mmol/g) under Ar and steam atmosphere at different temperatures.

320

Figure 1 XRD patterns of L-RA, L-CA and L-RE (a) and thermally treated limonite (b).

321

Figure 2 TEM images of natural limonite and thermally treated limonite.

322

Figure 3 TG and DTG curves of limonite.

323

Figure 4 SSA of raw limonite and thermally treated limonite.

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

324

Figure 5 Pore size distribution of raw limonite and thermally treated limonite.

325

Figure 6 Effects of catalyst and SV on gas yield.

326

Figure 7 Effects of catalyst and SV on carbon balance.

327

Figure 8 Effect of temperature on gas yield during catalytic reforming.

328

Figure 9 Effect of temperature on carbon balance during catalytic reforming.

329

Figure 10 Catalytic steam reforming mechanism of volatiles.

330

Figure 11 Effect of temperature on gas yield during steam reforming.

331

Figure 12 Effect of temperature on carbon balance during steam reforming.

ACS Paragon Plus Environment

Page 14 of 28

Page 15 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

332

Energy & Fuels

Table 1. Chemical composition of the Indonesian limonite (expressed as wt.% of metal oxides). Sample

Fe2O3

SiO2

Al2O3

NiO

Co2O3

Cr2O3

CaO

MgO

Limonite

65.00

1.67

11.24

1.69

0.13

1.70

0.07

0.25

333

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

334

Page 16 of 28

Table 2. The gas yields (mmol/g) under Ar and steam atmosphere at different temperatures.

Catalyst

Temperature (oC)

Ar

Steam

H2

CO

CO2

CH4

H2

CO

CO2

CH4

L-RE

400

6.7

2.2

4.5

4.5

18.1

3.1

6.6

2.8

L-RE

500

9.1

3.8

5.4

4.3

31.4

6.1

7.1

2.3

L-RE

600

15.5

9.8

4.1

4.0

41.2

9.6

7.0

2.3

L-RE

650

21.7

12.6

3.8

3.6

50.2

13.1

5.9

2.1

L-RE

700

21.5

12.4

3.0

3.8

52.2

14.3

5.8

1.8

L-RE

750

21.7

12.5

2.9

3.7

52.8

14.5

5.9

1.2

Ni/Al2O3

650

25.4

13.5

5.2

2.8

51.0

13.2

6.1

1.8

335

ACS Paragon Plus Environment

Page 17 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

336

a

∆ : Fe × : Fe 2 O 3



∗ ∗

b ∗





∆ FeOOH * Fe2O3



o

700 C

∗∗

+ : FeOOH

o

600 C ∆ ∆

o

500 C

L-RE

o

400 C

× × ×

×

×

×

××

o

300 C

L-CA

+



∆ ∆∆

+ +

+

++





o



200 C

+ +

o

25 C

L-RA 20

337 338

30

40

50

60

2 θ ( o)

70

80

90 10

20

30

40

o

50

2θ ( )

60

70

80

Figure 1. XRD patterns of L-RA, L-CA and L-RE (a) and thermally treated limonite (b).

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

339

340 341

Figure 2. TEM images of natural limonite and thermally treated limonite.

ACS Paragon Plus Environment

Page 18 of 28

Page 19 of 28

100

0.00 -0.02 -0.04 -0.06 -0.08

90 -0.10 -0.12 85

-0.14 -0.16

80 100

342 343

200

300

400 500 600 o Temperature ( C)

700

800

-0.18 900

Figure 3. TG and DTG curves of limonite.

344

ACS Paragon Plus Environment

o

Weight loss (%)

95

DTG (%/ C)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

Energy & Fuels

190 170 150 2

SSA(m /g)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 20 of 28

130 110 90 70 50 0

345 346

100

200

300 400 500 o Temperature( C)

600

700

Figure 4. SSA of raw limonite and thermally treated limonite.

ACS Paragon Plus Environment

Page 21 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

o

700 C o 600 C

o

500 C

o

400 C

o

300 C o

200 C Raw

0

2

4

6

8

10

12

14

16

18

20

347

Pore size (nm)

348

Figure 5. Pore size distribution of raw limonite and thermally treated limonite.

ACS Paragon Plus Environment

Energy & Fuels

50

o

-1

650 C SV: 3600 h

o

650 C

40 Gas yield (mmol/g, daf)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 22 of 28

20

CO2

10

0

349 350

H2

30

CO CH4

sand

L-CA Ni/Al2O3 L-RE Catalyst

7200

2400 -1 SV (h )

Figure 6. Effect of catalyst and SV on gas yield.

ACS Paragon Plus Environment

Page 23 of 28

o

-1

o

650 C SV: 3600 h

100

Carbon balance (%)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

650 C Cwso Cdep

80 Cgas

60

40

20 Cchar

0

351 352

Sand

L-CA Ni/Al2O3 L-RE Catalyst

7200 2400 -1 SV (h )

Figure 7. Effect of catalyst and SV on carbon balance.

ACS Paragon Plus Environment

Energy & Fuels

40 Gas yield (mmol/g, daf)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 24 of 28

30

H2

20 CO2

10

CO CH4

0 400

353 354

500

700 750 650 600 o Reforming temperature ( C)

Figure 8. Effect of temperature on gas yield during catalytic reforming.

ACS Paragon Plus Environment

Page 25 of 28

100

CWSO Cdep

80

Carbon balance (%)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

40

20

0

355 356

Cgas

60

Cchar

400

500 650 700 600 o Reforming temperature ( C)

750

Figure 9. Effect of temperature on carbon balance during catalytic reforming.

ACS Paragon Plus Environment

Energy & Fuels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

357 358

Figure 10. Catalytic steam reforming mechanism of volatiles.

ACS Paragon Plus Environment

Page 26 of 28

Page 27 of 28

80

Gas yield (mmol/g, daf)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Energy & Fuels

60 H2

40

20

0

CO CO2 CH4

400

500

600 650 L-RE

700

750

650 NiAl2O3

o

359 360

Reforming temperature ( C)

Figure 11. Effect of temperature on gas yield during steam reforming.

ACS Paragon Plus Environment

Energy & Fuels

100

CWSO Cdep

80 Carbon balance (%)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 28 of 28

Cgas

60

40

20

0

361 362

Cchar

400

500

600 650 700 750 L-RE o Reforming temperature ( C)

650 NiAl2O3

Figure 12. Effect of temperature on carbon balance during steam reforming.

ACS Paragon Plus Environment