Catalyzed Gasoline Particulate Filters Reduce Secondary Organic

Feb 22, 2019 - ... by practically eliminating black carbon and increasing the fractional contribution of organic ... Bowman, Jobst, Helm, Kleywegt, an...
0 downloads 0 Views 715KB Size
Subscriber access provided by WEBSTER UNIV

Environmental Processes

Catalyzed Gasoline Particulate Filters Reduce Secondary Organic Aerosol Production from Gasoline Direct Injection Vehicles Patrick Roth, Jiacheng Yang, Emmanuel Fofie, David R. Cocker, Thomas D. Durbin, Rasto Brezny, Michael Geller, Akua Asa-Awuku, and Georgios Karavalakis Environ. Sci. Technol., Just Accepted Manuscript • DOI: 10.1021/acs.est.8b06418 • Publication Date (Web): 22 Feb 2019 Downloaded from http://pubs.acs.org on February 23, 2019

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 57

Environmental Science & Technology

1

Catalyzed Gasoline Particulate Filters Reduce

2

Secondary Organic Aerosol Production from

3

Gasoline Direct Injection Vehicles

4

Patrick Roth †,‡, Jiacheng Yang †,‡, Emmanuel Fofie †,‡, David R. Cocker III †,‡, Thomas

5

D. Durbin †,‡, Rasto Brezny §, Michael Geller §, Akua Asa-Awuku *,†,‡,¥, Georgios

6

Karavalakis *,†,‡

7

†University

8

Research and Technology (CE-CERT), 1084 Columbia Avenue, Riverside, CA 92507,

9

USA

of California, Bourns College of Engineering, Center for Environmental

10

‡Department

of Chemical and Environmental Engineering, Bourns College of

11

Engineering, University of California, Riverside, CA 92521, USA

ACS Paragon Plus Environment

1

Environmental Science & Technology

12

§Manufacturers

13

Arlington, Virginia 22201, USA

14

¥Department

15

Engineering, University of Maryland, College Park, MD 20742, USA

16

Corresponding Authors

17

* Georgios Karavalakis. Phone: (951)-781-5799; Fax: (951)-781-5790; Email:

18

[email protected].

19

* Akua Asa-Awuku. Phone: (301)-405-8527; E-mail: [email protected]

20

Abstract

Page 2 of 57

of Emission Controls Association, 2200 Wilson Boulevard, Suite 310,

of Chemical and Biomolecular Engineering, A. James Clark School of

21

The effects of photochemical aging on exhaust emissions from two light-duty vehicles

22

with gasoline direct injection (GDI) engines equipped with and without catalyzed gasoline

23

particle filters (GPFs) were investigated using a mobile environmental chamber. Both

24

vehicles with and without the GPFs were exercised over the LA92 drive cycle using a

25

chassis dynamometer. Diluted exhaust emissions from the entire LA92 cycle were

26

introduced to the mobile chamber and subsequently photochemically reacted. It was

ACS Paragon Plus Environment

2

Page 3 of 57

Environmental Science & Technology

27

found that the addition of catalyzed GPFs will significantly reduce tailpipe particulate

28

emissions and also provide benefits in gaseous emissions, including non-methane

29

hydrocarbons (NMHC). Tailpipe emissions composition showed important changes with

30

the use of GPFs by practically eliminating black carbon and increasing the fractional

31

contribution of organic mass. Production of secondary organic aerosol (SOA) was

32

reduced with GPF addition, but was also dependent on engine design which determined

33

the amount of SOA precursors at the tailpipe. Our findings indicate that SOA production

34

from GDI vehicles will be reduced with the application of catalyzed GPFs through the

35

mitigation of reactive hydrocarbon precursors.

36

Introduction

37

Mobile sources are major contributors of emissions, especially in urban areas (1). On-

38

road vehicles equipped with internal combustion engines are known to emit nitrogen

39

oxides (NOx), carbon monoxide (CO), particulate matter (PM), and volatile organic

40

compounds (VOCs) (2). While vehicular NOx, CO, and VOC emissions have been

41

reducing over the past years as a result of tightening regulations imposed by

42

environmental and governmental agencies (3-4), several urban and rural areas across

ACS Paragon Plus Environment

3

Environmental Science & Technology

Page 4 of 57

43

the United States (US) and especially in California are characterized as nonattainment

44

for air pollutant emissions (5). Directly emitted PM from the vehicle’s exhaust is comprised

45

by a complex mixture of constituents, including sulfate, metals, and black carbon, as well

46

as primary organic aerosol (POA) (6). Studies have shown that PM emissions can be

47

deposited deep into the lungs, inducing oxidative stress and respiratory diseases (7-8).

48

Other studies have shown that PM emissions influence the cardiovascular system (9).

49

Emissions of NOx, VOCs, and other semi-volatile compounds are responsible for the

50

formation of secondary organic aerosol (SOA) through the photo-oxidation of these

51

species in the atmosphere (10-11). Emissions of NOx and VOCs can undergo

52

atmospheric reactions resulting in the formation of secondary lower volatility organic

53

gases. As the gases continue to react, their volatility decrease until these gases nucleate

54

(to form new particles) or condense onto existing particles and ultimately increase the

55

atmospheric organic aerosol (OA) mass (the organic fraction of particles). The

56

mechanism for the formation of SOA from anthropogenic or biogenic sources is not

57

entirely clear as it involves complex processes, with the number of organic compounds

58

participating in SOA formation being unknown (12-13). Studies have reported that SOA

ACS Paragon Plus Environment

4

Page 5 of 57

Environmental Science & Technology

59

accounts for the largest fraction of atmospheric OA, accounting for approximately 30-90%

60

of total OA in megacities (12, 14-15). Recent studies have shown that gasoline vehicles,

61

a major source of VOC emissions, dominate the production of SOA in urban areas

62

compared to diesel vehicles, at least in the United States (US) (16). This phenomenon

63

can be confirmed by the fact that gasoline vehicle sales far exceed those of diesel

64

vehicles in the US compared to the European Union, and also by the fact that gasoline

65

fuel consists of lighter and more volatile hydrocarbons in the range of C4-C10, which are

66

major SOA precursors (11, 17).

67

The significant contribution of gasoline vehicles to the SOA budget has been shown in

68

several studies (18-20). Gordon et al. (21) tested pre-LEV and newer gasoline vehicles

69

and they concluded that SOA formation exceeds primary PM emissions. They also found

70

lower SOA production from the newer vehicles compared to the pre-LEV gasoline

71

vehicles and less SOA production during the hot-start testing compared to cold-start

72

cycles. In another study, the authors confirmed the production of 15 times higher SOA

73

compared to POA when they tested a gasoline vehicle over the New European Driving

74

Cycle (NEDC) (22). Nordin et al. (23) showed that C6-C9 light aromatic hydrocarbons

ACS Paragon Plus Environment

5

Environmental Science & Technology

Page 6 of 57

75

contributed up to 60% of the formed SOA when they tested Euro 1 and Euro 4 compliant

76

passenger cars under idling conditions. Liu and co-workers (24) tested Euro 1 and Euro

77

4 gasoline vehicles under idling conditions and found that single-ring aromatics and

78

naphthalene were responsible for 51%-90% of the formed SOA.

79

Over the past decade the transportation sector has changed significantly with the

80

introduction of gasoline direct injection (GDI) engines, driven by stringent legislative

81

measures to lower vehicle fuel efficiency and greenhouse gas emissions. However, GDI

82

engines are known to emit more soot emissions than traditional port fuel injection (PFI)

83

engines (25-26). In GDI engines, fuel is sprayed directly into the combustion chamber,

84

which leads to incomplete fuel evaporation due to the imperfect mixing of fuel and air,

85

resulting in pockets with high temperatures but insufficient oxygen, leading to pyrolysis

86

reactions and soot formation. Additionally, as the fuel comes directly into contact with the

87

cold cylinder walls and piston, a small amount of fuel may impinge on the piston, which

88

during evaporation may lead to diffusion combustion and PM formation (27-29). One

89

strategy to reduce PM emissions from GDI vehicles is through the use of a gasoline

90

particulate filter (GPF) (30-31). The use of GPFs in GDI vehicles have been shown to

ACS Paragon Plus Environment

6

Page 7 of 57

Environmental Science & Technology

91

dramatically reduce PM mass, black carbon, and particle number emissions, as well as

92

toxic pollutants such as polycyclic aromatic hydrocarbons (PAHs) and nitrated PAHs (30,

93

32). Despite the increased popularity of GDI engines in the light-duty vehicle sector

94

across the US and Europe, there is limited information on the SOA production from

95

current technology GDI vehicles. In a recent study, Du et al. (33) tested both a PFI and

96

GDI vehicle over the NEDC and reported much higher SOA production for the GDI vehicle

97

compared to the PFI vehicle. In a different study, on the other hand, Zhao et al. (34)

98

showed no differences in SOA production between PFI and GDI vehicles. Finally,

99

Karjalainen et al. (35) tested a GDI vehicle over the NEDC and showed reduced SOA

100

formation when the engine was warm and higher SOA formation during the cold-start

101

phase when the three-was catalyst (TWC) was below its light-off temperature.

102

In this study, we investigated the SOA production from two current GDI vehicles with

103

and without a catalyzed GPF. To the best of our knowledge, only Pieber et al. (36)

104

evaluated SOA production from GDI vehicles equipped with prototype GPFs using a

105

batch and a flow reactor. While the authors did not find differences in SOA formation with

106

the tested non-catalyzed and catalytically coated GPFs, they suggested that the

ACS Paragon Plus Environment

7

Environmental Science & Technology

Page 8 of 57

107

catalyzed GPFs could be installed at the same position as the underfloor TWC, and that

108

this should be investigated in future work. Here, for the first time, we report results on

109

SOA formation with catalyzed GPFs or 4-way catalysts when exercising GDI vehicles

110

over the LA92 test cycle. This is a companion study to Yang et al. (30), in which detailed

111

primary gaseous and particulate emissions, as well as toxic pollutants, are reported.

112

Experimental

113

Test Vehicles and Driving Cycles. This study utilized two 2016 model year passenger

114

cars. GDI_1 was equipped with a 2.0 liter (L) wall-guided direct injection SI Atkinson cycle

115

engine and GDI_2 was equipped with a 1.5 L downsized turbocharged centrally-mounted

116

direct injection engine. Testing on both vehicles was performed over duplicate cold-start

117

LA92s cycles with commercial California E10 fuel. Additional information on the test

118

vehicles and driving cycle can be found elsewhere (30).

119

Both vehicles were tested in their original configuration and also retrofitted with a

120

catalyzed GPF, which was installed in place of the underfloor TWC. The original close-

121

coupled catalysts were retained in their stock location. The catalyzed GPFs were provided

ACS Paragon Plus Environment

8

Page 9 of 57

Environmental Science & Technology

122

by the Manufacturers of Emissions Controls Association (MECA) and more information

123

on their technical characteristics can be found in Yang et al. (30). Briefly, both GPFs were

124

sized based on the engine displacement of each vehicle and they were catalyzed with

125

precious metal loadings typical of underfloor catalysts matching the certification levels of

126

the two vehicles. The GPFs had a TWC washcoat with approximately 1.0 g/liter loading

127

of palladium (Pd) and rhodium (Rh) (Pd:Rh tatio of 4:1).

128

Emissions and Chamber Testing. All tests were conducted in CE-CERT’s Vehicle

129

Emissions Research Laboratory (VERL), on a Burke E. Porter 48-inch single-roll electric

130

dynamometer. A Pierburg Positive Displacement Pump-Constant Volume Sampling

131

(PDP-CVS) system was used to obtain standard bag measurements for total

132

hydrocarbons (THC), CO, NOx, non-methane hydrocarbons (NMHC), and carbon dioxide

133

(CO2). Bag measurements were made with a Pierburg AMA-4000 bench. More details for

134

the measurement methods and analysis of the primary emissions are provided elsewhere

135

(30).

ACS Paragon Plus Environment

9

Environmental Science & Technology

Page 10 of 57

136

The photochemical aging experiments were carried out in UCR’s (University of

137

California, Riverside) Mobile Atmospheric Chamber (MACh). The MACh consists of a 30

138

m3 2 mil fluorinated ethylene propylene Teflon film reactor. Briefly, the reactor is enclosed

139

in a segmented, lightweight aluminum frame fitted with wheels and a static resistant/UV

140

blackout tarp. It is surrounded by 600 15 W, 18”, T8 black light fluorescent bulbs that

141

serve as a photochemical light source. More detailed information on the construction and

142

characterization of MACh can be found in Vu et al. (37).

143

Prior to each irradiation experiment, the chamber was cleaned by injecting O3, H2O2,

144

and purified air (AADCO 737 air purifier) and was irradiated with UV light. The AADCO

145

air consists of no detectable reactive compounds (i.e., H2O, NOx, CO, O3, hydrocarbons)

146

to minimize background reactions in experiments. The chamber was then subsequently

147

emptied and filled repeatedly until all gases and particles were measured to be below

148

detection limit (H2O < -50°C dew point, NOx, CO, HC, and O3 at ~0 ppb, and PM=0 µg

149

m-3) then flushed with purified air overnight. Prior to the injection of vehicle exhaust, the

150

chamber was half-filled with the AADCO air. CVS blank tests were conducted during the

ACS Paragon Plus Environment

10

Page 11 of 57

Environmental Science & Technology

151

test campaign, with the chamber filled with the CVS air for the same duration as the LA92

152

cycle (1735 seconds) and then filled the remaining volume with the AADCO clean air. The

153

final mass of aerosol formation (wall loss corrected) was found to average at 0.67 μg/m3,

154

which was then subtracted from the actual vehicle exhaust experiments.

155

The dilute exhaust was injected from the PDP-CVS into MACh during an LA92 cycle

156

(excluding the hot soak). The exhaust was injected utilizing two Ejector Dilutors (Air-Vac

157

TD11OH) in parallel, connected to a home built clean air system with filters and

158

desiccants to remove the PM (HEPA filters), water (silica gel columns), NOx (Purafil), CO

159

(Carulite canister), and hydrocarbons (activated charcoal) from the dilution air. The

160

injection lines consisted of 8.5 m of 0.5” stainless steel tubing. The dilution setup was

161

designed to allow a variation of dilution from 50:1 up to 200:1 by varying the dilution air

162

and CVS flow. MACh utilized gravitational forces to ensure a positive pressure inside the

163

reactor, such that potential holes in the Teflon surface of the chamber will force air to flow

164

out of the reactor. This minimized the contamination and dilution of the exhaust

165

throughout the experiment.

ACS Paragon Plus Environment

11

Environmental Science & Technology

Page 12 of 57

166

For the experiments without the GPFs, after the exhaust was collected, the chamber

167

was filled to maximum volume with purified air. A concentration of 1.0 ppm of H2O2 was

168

also injected to act as an OH radical source. Prior to irradiation, the primary exhaust was

169

evaluated for about 30 min to help characterize the diluted tailpipe composition. The

170

emissions were then photo-oxidized continuously for 7-10 hours. The exhaust was

171

monitored during photo-oxidation utilizing a host of gaseous and particulate instruments

172

allowing for real time evaluation of the aged exhaust. All chamber experiments were

173

concluded when the wall-loss corrected aerosol mass formation, and the ozone

174

concentration plateaued.

175

For the experiments with the GPF-equipped vehicles, the partially diluted exhaust

176

collected in MACh was characterized for approximately 20-30 min. The total tailpipe PM

177

were significantly lower and inert seeds were deemed necessary to mimic a similar

178

condensable particulate surface area for low volatility gases to partition on as they age.

179

Therefore, an ammonium sulfate (AS) seed was injected into the chamber utilizing an

180

atomizer with a 2.40 M, aqueous AS solution (Acros, 99.5 % in Millipore © DI water

ACS Paragon Plus Environment

12

Page 13 of 57

Environmental Science & Technology

181

(18mΩ,