Chemoselective Chan-Lam Coupling Reactions between

1 day ago - An efficient Chan–Lam-type methodology for the selective synthesis of S-arylbenzimidazoles and N,S-diarylbenzimidazoles was developed...
0 downloads 0 Views 327KB Size
Subscriber access provided by UNIVERSITY OF SASKATCHEWAN LIBRARY

Article

Chemoselective Chan-Lam Coupling Reactions between Benzimidazoline-2-Thiones and Arylboronic Acids Xing Liu, and Zhi-Bing Dong J. Org. Chem., Just Accepted Manuscript • DOI: 10.1021/acs.joc.9b01370 • Publication Date (Web): 22 Aug 2019 Downloaded from pubs.acs.org on August 22, 2019

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 33 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Organic Chemistry

Chemoselective

Chan-Lam

Coupling

Reactions

between

Benzimidazoline-2-Thiones and Arylboronic Acids Xing Liu,a Zhi-Bing Dong* a,b aSchool

of Chemistry and Environmental Engineering, Wuhan Institute of

Technology, Wuhan 430205, China. bMinistry-of-Education

Key Laboratory for the Synthesis and Application of Organic

Functional Molecules, Hubei University, Wuhan 430062, China Email: [email protected]

R1

R

H N

Cu(OAc)2 H2O (5%) Bpy (10%)

S N R2 4

DMF/H2O = 1 : 3 80 oC, open air

R2

H N

1

S 1

N H

+

good selectivity good substrate scope H2O as reaction co-solvent 16 examples, yields up to 93% obviates the use of equivalent catalyst

S N

o

B(OH)2 R

N

Cu(OAc)2 H2O (50%) R1 Bpy (50%)

2

2

DMF, 30 C open air

3

R2

mild conditions one pot manner C-S and C-N bond formation in one step 14 examples, yields up to 95% first example of double Chan-Lam coupling

ABSTRACT An

efficient

Chan-Lam-type

methodology

for

the

selective

synthesis

of

S-arylbenzimidazoles and N,S-diarylbenzimidazoles was developed. The selectivity was controlled by varying the amount of the catalyst Cu(OAc)2•H2O, temperature and solvent switching. These transformations feature a simple protocol, broad functional group tolerance, high selectivity, and good to excellent yields. It is noteworthy that these reactions represent the first examples of the application of the selective Chan-Lam coupling.

ACS Paragon Plus Environment

The Journal of Organic Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 33

INTRODUCTION Benzimidazoline-2-thione derivatives represent a class of very important heterocyclic organosulfur compounds widely used in the fields of medicine, agriculture, dye industry, and functional materials.1 The heteroatom-containing aryl sulfide is universal and serves as a critically important structural motif in certain biologically active

natural

products

and

drugs.2

The

tautomeric

nature

of

benzimidazoline-2-thiones make them a unique structural class due to the presence of two adjacent nucleophilic nitrogen and sulfur atoms. According to the literature, benzimidazole sulfides have attracted much attention from synthetic chemists mainly for their wide range of biological activities (Figure 1).3 N

H N

S

S O

N

N

H N O

N

O CF3

Prevacid

O

Ufiprazole Cl

N N

S

N N S N N Antiprotozoal

N

H 2N

S N

N

N

NHcPr

Heat shock protein (HSP)-90 inhibitor

Figure 1. Some biologically active benzimidazole sulfides.

Given their importance, several synthetic strategies to access benzimidazole sulfides have been developed (Scheme 1). General methods for the synthesis of 2-thio-substituted benzimidazoles include: nucleophilic addition of arylthiols on pre-formed 2-halobenzimidazoles (path a),4 cross-coupling reactions between benzimidazoline-2-thiones and aryl iodides or diaryliodonium triflates (path b),5 and the S-arylation of benzimidazoles with diaryl disulfides (path c).6,3d Recently, Hajra and co-workers reported the visible-light-mediated synthesis of 2-thiobenzimidazoles

ACS Paragon Plus Environment

Page 3 of 33 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Organic Chemistry

via oxidative coupling of benzimidazoline-2-thione with arylhydrazine (path d).7 However, these synthetic processes involve the requirement of stoichiometric strong bases and/or high reaction temperatures, which somehow limit their synthetic applications. Though significant progress has been achieved, protocols that are environmentally benign, mild, and efficient are still highly valuable. H N

H N Cl

N

Ar Pa

th a

S

f

OT

SH

ArI H N

or

I Ar 2

th

Pa

N H

b

Ar S

-Ar S-S r A c th Pa

H N

N

ArN

Pa

th

H

HN H

d

2

H N S

N

N H

Scheme 1. Existing synthetic strategies towards 2-thiobenzimidazoles.

The Chan-Lam coupling is a generally known efficient tool for the construction of carbon-heteroatom bonds to proceed at ambient temperature as opposed to high temperature transformations.8 Many efficient Chan-Lam-type coupling reactions of aromatic and heteroaromatic NH-derivatives have been reported,9 while S-arylation has received less attention as compared to N- or O-arylations. Difficulties in C-S bond formation may be attributed to the sulfur species rapidly and irreversibly deactivating the catalyst.10 Although several examples of Chan-Lam-type C-S coupling reactions have been developed,11 the C-S bond formation between potentially ambiphilic thiocarbonyl compounds and phenylboronic acids is rare (Scheme 2, previous work).12 Recently, we disclosed an efficient Chan-Lam S-arylation of arylthioureas with aryl boronic acids.13 To the best of our knowledge, to date Chan-Lam-type mono- and bis-arylation of benzimidazoline-2-thiones with arylboronic acids was not

ACS Paragon Plus Environment

The Journal of Organic Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 4 of 33

reported. As part of our longstanding interest in organosulfur chemistry14 and our expertise in the development of Chan-Lam chemistry,15 we anticipated that chemoselective C-S and C-N bond formations with benzimidazoline-2-thiones via Chan–Lam-type cross-coupling reactions could be feasible. Here, we disclose un-precedented one-pot double and single Chan–Lam coupling reactions to access diversely substituted bis- and mono-arylbenzimidazoles (Scheme 2, this work). Unlike the previously reported work, the protocol here features broad substrate scope, simple and mild reaction conditions, as well as good to excellent yields. Notably, the use of an inorganic base and the exclusion of air and water were not required. The selectivity was shown to be modulated by varying the amount of Cu(OAc)2•H2O, temperature and solvent switching, which could be an attractive alternative approach to accessing these important compounds. Classical Chan-Lam coupling RX H

+

Ar B(OH)2

Cat. Cu(OAc)2 (equivalent) weak base, air, r.t.

Ar XR

X = N, O, S Previous work : Ph EtO2C

NH N H

S

Ph

Cu(OAc)2 (1.0 eq.) +

Ar B(OH)2 (4.0 eq.)

EtO2C

N

1,10-phenanthroline, air, MW, 110 oC

N H

H N

py

S N H + B(OH)2

R2

Ar

R2

This work :

R1

S

), B (50% H 2O o air ) 2 c A C, Cu(O F, 30 ),DM % 0 (5

Cu(O Ac) 2 H (10% ),DM 2 O (5%), Bpy F/H 2O = 1:3 , 80

R1

N S N R2

o

C, air

R

1

H N S N R2

Scheme 2. Chan-Lam-type coupling reactions: (i) previous work; (ii) this work: chemoselective C-S and C-N bond formations.

ACS Paragon Plus Environment

Page 5 of 33 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Organic Chemistry

RESULTS AND DISCUSSION Based on our earlier study,13 benzimidazoline-2-thione (1a; 0.5 mmol) and phenylboronic acid (2a; 1.0 mmol) were used as substrates in the model reaction (Table 1). When Cu(OAc)2•H2O (0.8 equiv) and 2,2'-bipyridine (Bpy; 0.8 equiv) were tested as catalyst system in THF, N,S-diarylation product 3a and S-arylation product 4a were obtained in a trace amount and 65% yield, respectively (entry 1). On the other hand, when dichloromethane was used as solvent, S-arylation product 4a was obtained in 59% yield (entry 2). Interestingly, N,S-diarylation product 3a was obtained as the sole product in 51% yield when DMF was used as a solvent (entry 3). Based on these results, we focused on improving the yield of 3a by increasing the amounts of Cu(OAc)2•H2O and 2a but satisfactory results were not obtained (entries 4 and 5). Similarly, the use of different mediators such as CuCl2, Cu(OAc)2•5H2O, and Cu(OTf)2 did not facilitate this reaction (entries 6–8). In the same line, the use of different ligands such as 1,10-phenanthroline, pyridine, and NEt3 proved that Bpy was most effective (entry 4 vs entries 9-11). The yield of product 3a was improved to 76% when an increased ratio 1a:2a was used (entry 4 vs entry 12). Replacement of DMF by other solvents such as DMSO or toluene proved to be ineffective (entries 13 and 14). Somehow surprisingly, screening the catalyst and ligand loading gave product 3a in 91% yield (entries 15-17). The optimal reaction conditions for the selective formation of 3a were as follows: 3a:2a = 1:4, Cu(OAc)2•H2O (50 mol%), Bpy (50 mol%), DMF (3 mL), 30 oC, 3.5 h (Table 1, entry 15). Next, we examined the selective synthesis of mono-S-arylbenzimidazole 4a (Table 1, entries 18-25). Nishiura and co-workers reported that the addition of a certain amount of water to a polar aprotic solvent (such as DMF) may improve the Chan-Lam

ACS Paragon Plus Environment

The Journal of Organic Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 6 of 33

coupling reaction.16 The adding of water makes the reaction proceed in heterogeneous way, which might slow down the reaction speed, thus allows the reaction to give the S-arylation selectivity, and decreasing the catalyst loading might also help the selective synthesis. We anticipated that a decreased amount of the mediator and the addition of water may favor the formation of 4a over the production of 3a. Hence, a tentative experiment was carried out under the following conditions: 1a:2a = 1:1.5, Cu(OAc)2•H2O (0.1 equiv), Bpy (0.2 equiv), DMF:H2O = 1:1 (Table 1, entry 18), and product 4a was obtained in 80% yield. Further screening of the catalyst and ligand loadings as well as the phenylboronic acid ratio (entries 19-21) were conducted. Finally, the reaction temperature screening (80°C) and the modulation of solvent (DMF : H2O = 1:3) gave the mono-S-arylbenzimidazole product 4a in 95% yield (entry 23). The control experiments (entries 26-27) in THF with a low mediator loading (entry 1 vs entry 26) and addition of water showed the parameter modulation based on THF had no help for the yields (entry 23 vs entry 27).

Table 1. Optimizing of the selective formations of 3a and 4aa

H N S N 1a H

Entry 1 2 3 4 5

+ PhB(OH)2 2a

Ratio

Cat.

(1a:2a)

[Cu]

1:2

0.8 eq Cu(OAc)2.H2O

1:2 1:2 1:3 1:3

Chan-Lam conditions

Ligand

.H .H .H .H

0.8 eq Cu(OAc)2 0.8 eq Cu(OAc)2 0.8 eq Cu(OAc)2 1.0 eq Cu(OAc)2

N S

+

H N S

N

N

3a

4a

Solvent

Temp.

Yield

Yield

(oC)

3a (%)b

4a (%)b

0.8 eq Bpyc

THF

30

trace

65

2O

0.8 eq Bpy

CH2Cl2

30

trace

59

2O

0.8 eq Bpy

DMF

30

51

0

2O

0.8 eq Bpy

DMF

30

71

trace

2O

1.0 eq Bpy

DMF

30

64

trace

ACS Paragon Plus Environment

Page 7 of 33 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Organic Chemistry

6

1:3

0.8 eq CuCl2 .5H

7

1:3

8

1:3

0.8 eq Cu(OTf)2

1:3

.H

9 10

1:3

11

1:3

12

1:4

0.8 eq Cu(OAc)2

0.8 eq Cu(OAc)2

2O

2O

0.8 eq Bpy

DMF

30

0

0

0.8 eq Bpy

DMF

30

0

0

0.8 eq Bpy 0.8 eq

DMF

30

0

0

1,10-Phend

DMF

30

56

trace

Pye

DMF

30

0

trace

.H

2O

.H

2O

0.8 eq Et3N

DMF

30

0

0

.H

2O

0.8 eq Bpy

DMF

30

76

trace

.H

0.8 eq Cu(OAc)2 0.8 eq Cu(OAc)2 0.8 eq Cu(OAc)2

0.8 eq

13

1:4

0.8 eq Cu(OAc)2

2O

0.8 eq Bpy

DMSO

30

57

trace

14

1:4

0.8 eq Cu(OAc)2.H2O

0.8 eq Bpy

Toluene

30

0

0

15

1:4

0.5 eq Cu(OAc)2.H2O

0.5 eq Bpy

DMF

30

91 (85)

0

16

1:4

0.4 eq Cu(OAc)2.H2O

0.4eq Bpy

DMF

30

87

0

17

1:4

18

1:1.5

19

1:1.5

20

1:1.5

21

1:1.2

22

1:1.5

.H

2O

0.1 eq Bpy

DMF

30

0

0

.H

2O

0.2 eq Bpy

DMF:H2O= 1:1

80

trace

80

0.1 eq Cu(OAc)2 0.1 eq Cu(OAc)2

.H

2O

0.1 eq Bpy

DMF:H2O= 1:1

80

trace

87

.H

2O

0.05 eq Bpy

DMF:H2O= 1:1

80

--

47

.H

2O

0.1 eq Bpy

DMF:H2O= 1:1

80

--

61

.H

0.05 eq Cu(OAc)2 0.05 eq Cu(OAc)2 0.05 eq Cu(OAc)2 0.05 eq Cu(OAc)2

2O

0.1 eq Bpy

DMF:H2O= 1:2

80

0

93

Cu(OAc)2.H2O

23

1:1.5

0.05 eq

0.1 eq Bpy

DMF:H2O= 1:3

80

0

95 (90)

24

1:1.5

0.05 eq Cu(OAc)2.H2O

0.1 eq Bpy

DMF:H2O= 1:4

80

0

79

25

1:1.5

0.05 eq Cu(OAc)2.H2O

0.1 eq Bpy

DMF:H2O= 1:3

60

0

61

26

1:2

0.1 eq Cu(OAc)2.H2O

0.1 eq Bpy

THF

30

trace

45f

.H

1:2 0.1 eq Cu(OAc)2 2O 0.2 eq Bpy THF:H2O= 1:3 60 trace 48g aReaction conditions (for entries 1–17): [Cu], ligand, 1a (0.5 mmol), solvent (0.16 M, total 3 mL), open air, 3.5 h; reaction conditions (for entries 18–25): [Cu], ligand, 1a (0.5 mmol), solvent (0.16 M, total 3 mL), open air, 18 h. bIsolated yield; scaled-up (5mmol) yields are shown in brackets. cBpy = 2,2’-bipyridine. d1,10-Phen = 1,10-phenanthroline. ePy = pyridine. fopen air, 3.5 h. gopen air, 18 h.

27

Under the optimized conditions we explored the substrate generality for the selective synthesis of N,S-diarylbenzimidazoles 3 (Table 2). A range of phenylboronic acids containing electron-donating and electron-withdrawing groups were tolerated. Halogen

substituted

arylboronic

acids

successfully

coupled

with

benzimidazoline-2-thione to give the desired products in moderate to good yields (3b-3d). Arylboronic acids with electron-donating substituents such as methyl, ethyl, methoxy, and isopropyl at the para- position afforded the corresponding products (3e, 3f,

3g,

3j)

with

good

to

excellent

yields

(81%-91%).

Di-substituted

3,4-dimethylphenylboronic acid and 3,5-dimethylphenylboronic acid underwent the coupling reation smoothly to give the corresponding products 3h and 3i in 93% and 82% yields, respectively. To our delight, 3,4-methylenedioxyphenylboronic acid and

ACS Paragon Plus Environment

The Journal of Organic Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 8 of 33

4-(methoxycabonyl)phenylboronic acid were also suitable for this transformation (3k and 3l). It is a pity that 2-chloro-4-methylbenzeneboronic acid could not be converted to desired di-substituted arylbenzimidazole product under the optimal reaction conditions, and the mono-S-aryl benzimidazole 4k was obtained in 91% yield. The effect of the substituent attached on the benzimidazoline-2-thione ring was examined, and it showed that the electron donating benzimidazoline-2-thione was more reactive than the electron withdrawing benzimidazoline-2-thione (3m vs 3n).

Table 2. Substrate scope for the selective synthesis of N,S-diarylbenzimidazoles 3a R2 H N

R1

Cu(OAc)2 H2O (50%) Bpy (50%) R1 DMF, 30 oC, open air

B(OH)2 S

N 1 H

+ R2

S N

2

3

F

Cl

N

N

S

N

R2

Br

N S

N

S

N

S

N

N 3e, 88%

3d, 38%

3c, 65%

3b, 51%

N

F

Cl

Br

O

N

N

N

S N

S N

N

N 3g, 91%

3f, 81%

N S

S

3h, 93%

3i, 82%

O

O

O

O

O N

N

S

N

S

N

S

N

3j, 86%

O

3k, 65%

N 3l, 67%

O

Cl

N N

S

N

S 3m, 78%

O O

H N S N 3n, 30%

N Cl 4k, 91%

ACS Paragon Plus Environment

Page 9 of 33 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Organic Chemistry

a

Reaction conditions: 1 (0.5 mmol), 2 (2.0 mmol), Cu(OAc)2.H2O (50 mol%), Bpy (50 mol%), DMF (3 mL), 30

oC,

open air, 3.5-9 h; Isolated yield based on 1.

Next, we explored the substrate generality for the selective synthesis of N-arylbenzimidazoles 4 (Table 3). Here again, a variety of phenylboronic acids containing electron-donating and electron-withdrawing groups were tolerated. Both electron-donating groups, such as methyl, methoxy, isopropyl, ethyl (4b-4e) and electron-withdrawing groups, such as chloro, bromo, cyano (4g-4i) on the aromatic ring gave the respective mono-S-arylation products in good to high yields (70-95%). Due to the possible steric hindrance reason, the o-methyl and o-chloro compound showed similar activity with good yields (4j, 4k), while no significant effect of steric hindrance was observed when m-methyl and m-bromo groups were applied (4f, 4m). It

was

noteworthy

that

both

electron-rich

and

electron-deficient

benzimidazoline-2-thiones were suitable for this transformation (4n-4p). The extension of this protocol was also applied to 2-mercaptobenzothiazole and 1,1-dimethyl-3-phenylthiourea, and the desired product 4q and 4r were obtained in poor yields (28% and 33%, respectively).

Table 3. Substrate scope for the selective synthesis of S-arylbenzimidazoles 4a H N

R1

S 1

N H

B(OH)2 Cu(OAc)2 H2O (5%) Bpy (10%) R1

+ R

2

2

DMF/H2O = 1 : 3, 80 oC, open air

ACS Paragon Plus Environment

H N S N 4

R2

The Journal of Organic Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

H N

H N

H N

S

N

N

N 4e, 95%

4d, 84%

4c, 70%

4b, 93%

H N

S

S

S N

Page 10 of 33

O H N

H N

H N

S

S N 4f, 84% H N

S

N

N

4g, 81%

4h, 82% Cl

H N

S

4k, 78% H N

S

CN H N

S

S O H N

Br S

N 4m, 92%

Br

O S

N

N

4o, 89%

4p, 72%

N

S

Br

4l, 52% H N

S N 4n, 77%

4i, 72%

N

N

4j, 80%

S N

H N

Cl

S

N

H N

N S

N 4q, 28%

4r, 33%

a Reaction

conditions: 1 (0.5 mmol), 2 (0.75 mmol), Cu(OAc)2.H2O (5 mol%), Bpy (10 mol%), DMF : H2O = 1 : 3 (total 3 mL), 80 oC, open air, 18-24 h; Isolated yield based on 1.

In an additional experiment, S-arylbenzimidazole product 4k (cf. Table 2) was obtained under the optimal conditions for the synthesis of N,S-diarylbenzimidazoles 3, and 4a was isolated in 49 % yield in 2 h by using the double Chan-Lam reaction conditions (control experiment shown in Scheme 3 as well). These indicate that the S-arylbenzimidazole 4a is an intermediate for the double Chan-Lam reaction, and the S-arylation is faster than the N-arylation. Product 4a was characterized by X-ray crystallography (Scheme 3, CCDC 1905719), and this supports the fact that S-arylation is more favored than the N-arylation. H N S N H

PhB(OH)2 (4.0 eq) Cu(OAc)2 H2O (50%) Bpy (50%), DMF 30 oC, open air, 2h

H N S N 4a, 49%

ACS Paragon Plus Environment

X-Ray crystal of 4a

Page 11 of 33 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Organic Chemistry

Scheme 3. Control experiment under the “double” Chan-Lam reaction conditions: S-aryl intermediate 4a was obtained. Base on the above experimental results and previous literature reports,17,11a a reaction mechanism for the mono- and bis-arylation of benzimidazoline-2-thiones with boronic acids was proposed (Scheme 4). As for the assumed Cu(I/II/Ⅲ) catalysis cycle, the intermediary Cu(I) complex would be oxidized under aerobic conditions. For the S-arylation, aryl boronic acid would reacted with Cu(II) to form complex A. The intermediate A was oxidized by Cu(II), forming an Cu(III) species B that would react

with

the

tautomeric

form

of

benzimidazoline-2-thione

(2-mercaptobenzimidazole), the subsequent reductive elimination gave product 4 and Cu(I). Finally, rapid aerobic oxidation of Cu(I) regenerates Cu(II). For the bis-S/N-arylation, the S-arylation took place firstly to give mono-S-arylation product 4, 4 further reacted with B to give product bis-S/N-arylated product 3 and Cu(I) via reductive elimination. N

Cu

N



1/2 O2

1/2 O2 ArB(OH)2

N Cu H N S 4 H N S N H

Ⅱ Cu -Ar

N

I

CuI

A

Ar N

CuII

Ar

CuI

N

N

3

H N

H N SH

N N B

Ar S

S

III -

Cu Ar

4

N

Scheme 4. Proposed mechanism for the formation of 3a and 4a.

ACS Paragon Plus Environment

Ar

N

The Journal of Organic Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

CONCLUSION In summary, we describe herein an easy and efficient method for the controllable synthesis of S-arylbenzimidazoles and N,S-diarylbenzimidazoles by using inexpensive and commercially available arylboronic acids as well as Cu(OAc)2•H2O as catalyst. The products were selectively formed in good to excellent yields by varying the amount of Cu(OAc)2•H2O, temperature and solvent switching. The protocol features good selectivity, easy performance, broad functional group tolerance, and good to excellent yields. To the best of our knowledge, this is the first report of selective synthesis of mono- and bis-S/N-arylbenzimidazoles performed by Chan-Lam reaction, which might be useful and practical for the synthesis of some potentially biologically active compounds.

EXPERIMENTAL SECTION The thione substrates 1 were prepared by using our previously reported method, see ref 14(e). All

other starting materials were purchased from commercial suppliers and used without further purification unless otherwise stated. Yields refer to isolated compounds estimated to be >95% pure as determined by 1H NMR and capillary GC analysis. NMR spectra were recorded on a Bruker AM400 NMR instrument in CDCl3 and DMSO-d6 using TMS as an internal standard. Chemical shifts are given in ppm and coupling constants (J) are given in Hz. All melting points were determined on a RY-1G melting point instrument without correction. High-resolution mass spectra (HRMS) were recorded on a Finnigan MAT 95Q or Finnigan 90 mass instrument (ESI). TLC was performed using aluminum plates coated with SiO2 (Merck 60, F-254) and visualized with UV light at 254 nm. Column chromatography was performed on

ACS Paragon Plus Environment

Page 12 of 33

Page 13 of 33 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Organic Chemistry

silica gel (200-300 mesh) with petroleum ether-EtOAc as eluent. Typical procedure for the synthesis of bis-arylbenzimidazoles 3 (TP1). Benzimidazoline-2-thione 1a (0.5 mmol) and phenylboronic acid 2a (2.0 mmol), Cu(OAc)2.H2O (0.25 mmol), bipyridine (0.25 mmol) were added in a dried tube (open to air) equipped with a magnetic stirring bar, DMF (3.0 mL) was then added. The mixture was stirred at 30 oC and checked by TLC until the starting material was finished. The reaction was terminated with sat. NH4Cl solution (3 mL) and then extracted with ethyl acetate. The crude solution was dried over anhydrous Na2SO4 and evaporated under vacuum. The residue was purified by flash column chromatography to afford the desired product 3a. Typical procedure for the synthesis of mono-arylbenzimidazoles 4 (TP2). Benzimidazoline-2-thione 1a (0.5 mmol) and phenylboronic acid 2a (0.75 mmol), Cu(OAc)2.H2O (0.025 mmol), bipyridine (0.05 mmol) were added in a dried tube (open to air) equipped with a magnetic stirring bar, DMF (0.75 mL) and H2O (2.25 mL) was then added. The mixture was stirred at 80 oC and checked by TLC until the starting material was finished. The reaction was terminated with sat. NH4Cl solution (3 mL) and then extracted with ethyl acetate. The crude solution was dried over anhydrous Na2SO4 and evaporated under vacuum. The residue was purified by flash column chromatography to afford the desired product 4a

Analytical data of the products 1-phenyl-2-(phenylthio)-1H-benzo[d]imidazole (3a) According to TP1, the residue was purified by flash chromatography on silica gel

ACS Paragon Plus Environment

The Journal of Organic Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

(petroleum ether/ethyl acetate = 5:1) to give the target compound 3a as a colorless oil (137 mg, yield = 91%; for 5mmol scale-up syntheses, 1283 mg, yield = 85%). 1H NMR (400 MHz, CDCl3, TMS): δ (ppm) 5.59 (d, 1H, J = 8.0 Hz), 5.54-5.45 (m, 3H), 5.41 (d, 2H, J = 8.0 Hz), 5.37-5.35 (m, 2H), 5.29-5.26 (m, 3H), 5.19-5.11 (m, 2H), 5.01 (d, 1H, J = 8.0 Hz). 13C NMR (100 MHz, CDCl3, TMS): δ (ppm) 154.1, 148.0, 142.0, 139.9, 137.4, 135.3, 135.0, 134.6, 134.4, 133.7, 132.4, 128.5, 127.8, 123.9, 115.1. HRMS (ESI) m/z [M+H]+ Calcd for C19H15N2S (303.0951), found: 303.0955. 1-(4-fluorophenyl)-2-((4-fluorophenyl)thio)-1H-benzo[d]imidazole (3b) According to TP1, the residue was purified by flash chromatography on silica gel (petroleum ether/ethyl acetate = 5:1) to give the target compound 3b as a colorless oil (86 mg, yield = 51%). 1H NMR (400 MHz, CDCl3, TMS): δ (ppm) 7.64 (d, 1H, J = 8.0 Hz), 7.30-7.26 (m, 2H), 7.22-7.08 (m, 6H), 6.96 (d, 1H, J = 8.0 Hz), 6.87 (t, 2H, J = 8.0 Hz). 13C NMR (100 MHz, CDCl3, TMS): δ (ppm) 161.9 (d, J = 248 Hz), 161.5 (d, J = 248 Hz), 148.8, 142.0, 136.3, 134.0 (d, J = 9.0 Hz), 130.2 (d, J = 4.0 Hz), 128.3 (d, J = 8.0 Hz), 124.1 (d, J = 3.0 Hz), 122.4, 121.8, 118.4, 115.7 (d, J = 23.0 Hz), 115.5 (d, J = 23.0 Hz), 108.6. HRMS (ESI) m/z [M+H]+ Calcd for C19H13F2N2S (339.0762), found: 339.0765. 1-(4-chlorophenyl)-2-((4-chlorophenyl)thio)-1H-benzo[d]imidazole (3c) According to TP1, the residue was purified by flash chromatography on silica gel (petroleum ether/ethyl acetate = 5:1) to give the target compound 3c as a colorless oil (120 mg, yield = 65%). 1H NMR (400 MHz, CDCl3, TMS): δ (ppm) 7.65 (d, 1H, J = 8.0 Hz), 7.38 (d, 2H, J = 12.0 Hz), 7.24-7.10 (m, 8H), 6.99 (d, 1H, J = 8.0 Hz). 13C NMR (100 MHz, CDCl3, TMS): δ (ppm) 147.8, 142.0, 136.0, 134.1, 133.8, 132.7, 132.7, 128.9, 128.5, 128.1, 127.7, 127.6, 122.7, 122.0, 118.5, 115.9, 108.7. HRMS (ESI) m/z [M+H]+ Calcd for C19H13Cl2N2S (371.0171), found: 371.0169.

ACS Paragon Plus Environment

Page 14 of 33

Page 15 of 33 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Organic Chemistry

1-(4-bromophenyl)-2-((4-bromophenyl)thio)-1H-benzo[d]imidazole (3d) According to TP1, the residue was purified by flash chromatography on silica gel (petroleum ether/ethyl acetate = 5:1) to give the target compound 3d as a colorless oil (87 mg, yield = 38%). 1H NMR (400 MHz, CDCl3, TMS): δ (ppm) 7.66 (d, 1H, J = 8.0 Hz), 7.56 (d, 2H, J = 8.0 Hz), 7.30 (d, 2H, J = 8.0 Hz), 7.21-7.11 (m, 6H), 7.01 (d, 1H, J = 8.0 Hz).

13C

NMR (100 MHz, CDCl3, TMS): δ (ppm) 155.6, 147.5, 142.0,

135.9, 133.2, 132.8, 131.9, 131.4, 131.0, 128.4, 127.9, 122.7, 122.1, 122.1, 121.9, 118.5, 116.5, 108.8. HRMS (ESI) m/z [M+H]+ Calcd for C19H13Br2N2S (458.9161), found: 458.9165. 1-(p-tolyl)-2-(p-tolylthio)-1H-benzo[d]imidazole (3e) According to TP1, the residue was purified by flash chromatography on silica gel (petroleum ether/ethyl acetate = 5:1) to give the target compound 3e as a colorless oil (145 mg, yield = 88%). 1H NMR (400 MHz, CDCl3, TMS): δ (ppm) 7.60 (d, 1H, J = 8.0 Hz), 7.19 (d, 2H, J = 8.0 Hz), 7.13 (d, 2H, J = 8.0 Hz), 7.08-7.04 (m, 3H), 7.00 (t, 1H, J = 8.0 Hz), 6.93 (t, 3H, J = 8.0 Hz), 2.27 (s, 3H), 2.13 (s, 3H). 13C NMR (100 MHz, CDCl3, TMS): δ (ppm) 154.2, 149.5, 142.0, 137.9, 137.6, 136.2, 132.0, 131.5, 129.1, 128.9, 128.4, 126.0, 125.3, 121.8, 121.3, 118.0, 114.4, 108.7, 20.1, 20.1. HRMS (ESI) m/z [M+H]+ Calcd for C21H19N2S (331.1264), found: 331.1269. 1-(4-ethylphenyl)-2-((4-ethylphenyl)thio)-1H-benzo[d]imidazole (3f) According to TP1, the residue was purified by flash chromatography on silica gel (petroleum ether/ethyl acetate = 5:1) to give the target compound 3f as a colorless oil (145 mg, yield = 81%). 1H NMR (400 MHz, CDCl3, TMS): δ (ppm) 7.62 (d, 1H, J = 8.0 Hz), 7.22-7.17 (m, 4H), 7.10 (t, 3H, J = 8.0 Hz), 7.03 (t, 1H, J = 8.0 Hz), 6.96 (t, 3H, J = 8.0 Hz), 2.63-2.57 (m, 2H), 2.48-2.42 (m, 2H), 1.18 (t, 3H, J = 8.0 Hz), 1.05 (t, 3H, J = 8.0 Hz). 13C NMR (100 MHz, CDCl3, TMS): δ (ppm) 155.5, 150.7, 145.3,

ACS Paragon Plus Environment

The Journal of Organic Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

145.0, 143.1, 137.4, 134.6, 133.3, 132.9, 129.0, 128.9, 128.5, 127.3, 126.8, 123.1, 122.6, 119.2, 115.6, 110.0, 28.7, 28.6, 15.5, 15.4. HRMS (ESI) m/z [M+H]+ Calcd for C23H23N2S (359.1577), found: 359.1574. 1-(4-methoxyphenyl)-2-((4-methoxyphenyl)thio)-1H-benzo[d]imidazole (3g) According to TP1, the residue was purified by flash chromatography on silica gel (petroleum ether/ethyl acetate = 5:1) to give the target compound 3g as a colorless oil (165 mg, yield = 91%). 1H NMR (400 MHz, CDCl3, TMS): δ (ppm) 7.60 (d, 1H, J = 8.0 Hz), 7.28 (d, 2H, J = 8.0 Hz), 7.15-7.01 (m, 4H), 6.94 (d, 1H, J = 8.0 Hz), 6.89 (d, 2H, J = 8.0 Hz), 6.71 (d, 2H, J = 8.0 Hz), 3.73 (s, 3H), 3.64 (s, 3H). 13C NMR (100 MHz, CDCl3, TMS): δ (ppm) 159.2, 158.8, 150.6, 142.1, 136.7, 134.5, 127.7, 126.9, 121.8, 121.3, 119.1, 118.1, 113.9, 113.7, 108.6, 54.6, 54.3. HRMS (ESI) m/z [M+H]+ Calcd for C21H19N2O2S (363.1162), found: 363.1166. 1-(3,4-dimethylphenyl)-2-((3,4-dimethylphenyl)thio)-1H-benzo[d]imidazole (3h) According to TP1, the residue was purified by flash chromatography on silica gel (petroleum ether/ethyl acetate = 5:1) to give the target compound 3h as a yellow oil (166 mg, yield = 93%). 1H NMR (400 MHz, CDCl3, TMS): δ (ppm) 7.61 (d, 1H, J = 8.0 Hz), 7.13-7.07 (m, 4H), 7.02 (t, 1H, J = 8.0 Hz), 6.97-6.90 (m, 4H), 2.20 (s, 3H), 2.15 (s, 3H), 2.07 (s, 3H), 2.03 (s, 3H). 13C NMR (100 MHz, CDCl3, TMS): δ (ppm) 154.4, 149.6, 142.0, 136.9, 136.4, 136.3, 136.3, 133.3, 131.8, 129.8, 129.4, 129.3, 127.1, 125.4, 123.5, 121.6, 121.1, 117.9, 108.7, 18.6, 18.5, 18.4. 18.3. HRMS (ESI) m/z [M+H]+ Calcd for C23H23N2S (359.1577), found: 359.1580. 1-(3,5-dimethylphenyl)-2-((3,5-dimethylphenyl)thio)-1H-benzo[d]imidazole (3i) According to TP1, the residue was purified by flash chromatography on silica gel (petroleum ether/ethyl acetate = 5:1) to give the target compound 3i as a white soild (147 mg, yield = 82%). mp: 112-114 oC. 1H NMR (400 MHz, CDCl3, TMS): δ (ppm)

ACS Paragon Plus Environment

Page 16 of 33

Page 17 of 33 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Organic Chemistry

7.65 (d, 1H, J = 8.0 Hz), 7.11 (t, 1H, J = 8.0 Hz), 7.04 (t, 1H, J = 8.0 Hz), 6.97 (t, 2H, J = 8.0 Hz), 6.89 (s, 2H), 6.75 (s, 3H), 2.21 (s, 6H), 2.09 (s, 6H). 13C NMR (100 MHz, CDCl3, TMS): δ (ppm) 148.7, 142.0, 138.0, 137.5, 136.2, 134.1, 129.3, 129.3, 129.0, 128.8, 123.9, 121.8, 121.2, 118.1, 108.8, 20.0. 19.9. HRMS (ESI) m/z [M+H]+ Calcd for C23H23N2S (359.1577), found: 359.1582. 1-(4-isopropylphenyl)-2-((4-isopropylphenyl)thio)-1H-benzo[d]imidazole (3j) According to TP1, the residue was purified by flash chromatography on silica gel (petroleum ether/ethyl acetate = 5:1) to give the target compound 3j as a colorless oil (166 mg, yield = 86%). 1H NMR (400 MHz, CDCl3, TMS): δ (ppm) 7.64 (d, 1H, J = 8.0 Hz), 7.19 (d, 4H, J = 8.0 Hz), 7.11 (t, 3H, J = 8.0 Hz), 7.04 (t, 1H, J = 8.0 Hz), 6.98 (t, 3H, J = 8.0 Hz), 2.90-2.83 (m, 1H), 2.75-2.68 (m, 1H), 1.19 (d, 6H, J = 8.0 Hz), 1.08 (d, 6H, J = 8.0 Hz).

13C

NMR (100 MHz, CDCl3, TMS): δ (ppm) 154.5,

149.4, 148.7, 148.3, 142.1, 138.1, 136.4, 132.0, 132.0, 126.5, 126.4, 126.2, 126.1, 125.9, 122.0, 121.5, 118.2, 114.4, 108.9, 32.9, 32.8, 23.0, 22.8. HRMS (ESI) m/z [M+H]+ Calcd for C25H27N2S (387.1890), found: 387.1894. 1-(benzo[d][1,3]dioxol-5-yl)-2-(benzo[d][1,3]dioxol-5-ylthio)-1H-benzo[d]imidazol e (3k) According to TP1, the residue was purified by flash chromatography on silica gel (petroleum ether/ethyl acetate = 5:1) to give the target compound 3k as a white soild (127 mg, yield = 65%). mp: 137-139 oC. 1H NMR (400 MHz, CDCl3, TMS): δ (ppm) 7.61 (d, 1H, J = 8.0 Hz), 7.13-7.05 (m, 2H), 6.99 (d, 1H, J = 8.0 Hz), 6.87 (d, 2H, J = 8.0 Hz), 6.81 (d, 1H, J = 8.0 Hz), 6.71 (t, 2H, J = 8.0 Hz), 6.61 (d, 1H, J = 8.0 Hz), 5.96 (s, 2H), 5.83 (s, 2H). 13C NMR (100 MHz, CDCl3, TMS): δ (ppm) 150.1, 147.6, 147.3, 147.1, 147.1, 142.0, 136.5, 127.7, 127.0, 121.9, 121.4, 120.2, 118.1, 113.1, 108.6, 107.8, 107.5, 107.3, 101.0, 100.5. HRMS (ESI) m/z [M+H]+ Calcd for

ACS Paragon Plus Environment

The Journal of Organic Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

C21H15N2O4S (391.0747), found: 391.0744. methyl 4-((1-(4-(methoxycarbonyl)phenyl)-1H-benzo[d]imidazol-2-yl)thio)benzo ate (3l) According to TP1, the residue was purified by flash chromatography on silica gel (petroleum ether/ethyl acetate = 5:1) to give the target compound 3l as a colorless oil (140 mg, yield = 67%). 1H NMR (400 MHz, CDCl3, TMS): δ (ppm) 8.09 (d, 2H, J = 8.0 Hz), 7.79 (d, 2H, J = 8.0 Hz), 7.72 (d, 1H, J = 8.0 Hz), 7.35 (d, 2H, J = 8.0 Hz), 7.27-7.18 (m, 4H), 7.09 (d, 1H, J = 8.0 Hz), 3.88 (s, 3H), 3.79 (s, 3H). 13C NMR (100 MHz, CDCl3, TMS): δ (ppm) 166.1, 165.2, 164.9, 160.6, 145.9, 141.9, 138.0, 136.2, 135.6, 130.6, 130.0, 129.6, 129.3, 128.4, 126.1, 123.3, 122.5, 120.2, 118.7, 114.3, 109.1, 51.5, 51.2. HRMS (ESI) m/z [M+H]+ Calcd for C23H19N2O4S (419.1060), found: 419.1064. 5,6-dimethyl-1-phenyl-2-(phenylthio)-1H-benzo[d]imidazole (3m) According to TP1, the residue was purified by flash chromatography on silica gel (petroleum ether/ethyl acetate = 5:1) to give the target compound 3m as a white soild (129 mg, yield = 78%). mp: 102-104 oC. 1H NMR (400 MHz, CDCl3, TMS): δ (ppm) 7.45 (s, 1H), 7.30 (d, 3H, J = 8.0 Hz), 7.15-7.12 (m, 4H), 7.04 (t, 3H, J = 4.0 Hz), 6.77 (s, 1H), 2.22 (s, 3H), 2.15 (s, 3H). 13C NMR (100 MHz, CDCl3, TMS): δ (ppm) 146.2, 140.6, 134.7, 134.6, 131.8, 130.7, 130.6, 130.3, 128.3, 128.0, 127.6, 126.6, 126.3, 118.5, 109.2, 19.3, 19.1. HRMS (ESI) m/z [M+H]+ Calcd for C21H19N2S (331.1264), found: 331.1268. 6-chloro-1-phenyl-2-(phenylthio)-1H-benzo[d]imidazole (3n) According to TP1, the residue was purified by flash chromatography on silica gel (petroleum ether/ethyl acetate = 5:1) to give the target compound 3n as a yellow oil (50 mg, yield = 30%). 1H NMR (400 MHz, CDCl3, TMS): δ (ppm) 7.64 (s, 1H),

ACS Paragon Plus Environment

Page 18 of 33

Page 19 of 33 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Organic Chemistry

7.46-7.42 (m, 3H), 7.32 (t, 2H, J = 4.0 Hz), 7.25-7.18 (m, 5H), 7.07 (d, 1H, J = 8.0 Hz), 6.93 (d, 1H, J = 8.0 Hz).

13C

NMR (100 MHz, CDCl3, TMS): δ (ppm) 150.3,

142.8, 134.8, 133.9, 131.7, 128.9, 128.6, 128.2, 128.2, 127.5, 127.2, 126.2, 122.5, 118.0, 109.5. HRMS (ESI) m/z [M+H]+ Calcd for C19H14ClN2S (337.0561), found: 337.0558. 2-(phenylthio)-1H-benzo[d]imidazole (4a) According to TP2, the residue was purified by flash chromatography on silica gel (petroleum ether/ethyl acetate = 2:1) to give the target compound 4a as a white soild (107 mg, yield = 95%; for 5mmol scale-up syntheses, 1017 mg, yield = 90%). mp: 202-204 oC. 1H NMR (400 MHz, DMSO-d6, TMS): δ (ppm) 12.78 (s, 1H), 7.58-7.41 (m, 7H), 7.19 (s, 2H). 13C NMR (100 MHz, DMSO-d6, TMS): δ (ppm) 151.8, 148.9, 140.5, 136.4, 136.4, 134.8, 133.4, 127.8, 126.8, 123.5, 116.2. HRMS (ESI) m/z [M+H]+ Calcd for C13H11N2S (227.0638), found: 227.0642. 2-(p-tolylthio)-1H-benzo[d]imidazole (4b) According to TP2, the residue was purified by flash chromatography on silica gel (petroleum ether/ethyl acetate = 2:1) to give the target compound 4b as a white soild (112 mg, yield = 93%). mp: 174-176 oC. 1H NMR (400 MHz, DMSO-d6, TMS): δ (ppm) 12.65 (s, 1H), 8.00-7.14 (m, 8H), 2.32 (s, 3H). 13C NMR (100 MHz, DMSO-d6, TMS): δ (ppm) 148.2, 139.8, 138.8, 134.7, 134.0, 132.8, 130.7, 128.6, 128.5, 127.3, 122.4, 21.1. HRMS (ESI) m/z [M+H]+ Calcd for C14H13N2S (241.0794), found: 241.0790. 2-((4-methoxyphenyl)thio)-1H-benzo[d]imidazole (4c) According to TP2, the residue was purified by flash chromatography on silica gel (petroleum ether/ethyl acetate = 2:1) to give the target compound 4c as a white soild (90 mg, yield = 70%). mp: 206-208 oC. 1H NMR (400 MHz, DMSO-d6, TMS): δ

ACS Paragon Plus Environment

The Journal of Organic Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

(ppm) 12.43 (s, 1H), 7.57-7.36 (m, 4H), 7.13 (d, 2H, J = 8.0 Hz), 7.03 (d, 2H, J = 8.0 Hz), 3.80 (s, 3H).

13C

NMR (100 MHz, DMSO-d6, TMS): δ (ppm) 160.5, 149.4,

144.2, 135.8, 122.5, 121.8, 120.2, 118.3, 115.7, 111.2, 55.8. HRMS (ESI) m/z [M+H]+ Calcd for C14H13N2OS (257.0743), found: 257.0747. 2-((4-isopropylphenyl)thio)-1H-benzo[d]imidazole (4d) According to TP2, the residue was purified by flash chromatography on silica gel (petroleum ether/ethyl acetate = 2:1) to give the target compound 4d as a white soild (113 mg, yield = 84%). m.p: 207-209 oC. 1H NMR (400 MHz, DMSO-d6, TMS): δ (ppm) 12.69 (s, 1H), 7.56-7.15 (m, 8H), 2.94-2.87 (m, 1H), 1.21 (s, 3H), 1.19 (s, 3H). 13C

NMR (100 MHz, DMSO-d6, TMS): δ (ppm) 149.4, 147.9, 144.1, 135.8, 132.5,

128.1, 128.0, 122.8, 122.0, 118.6, 111.4, 33.6, 24.1. HRMS (ESI) m/z [M+H]+ Calcd for C16H17N2S (269.1107), found: 269.1104. 2-((4-ethylphenyl)thio)-1H-benzo[d]imidazole (4e) According to TP2, the residue was purified by flash chromatography on silica gel (petroleum ether/ethyl acetate = 2:1) to give the target compound 4e as a white soild (121 mg, yield = 95%). mp: 189-191 oC. 1H NMR (400 MHz, DMSO-d6, TMS): δ (ppm) 12.67 (s, 1H), 7.46 (d, 4H, J = 8.0 Hz), 7.27 (d, 2H, J = 8.0 Hz), 7.17 (s, 2H), 2.64-2.58 (m, 2H), 1.18 (t, 3H, J = 8.0 Hz). 13C NMR (100 MHz, DMSO-d6, TMS): δ (ppm) 148.0, 144.9, 134.7, 132.6, 129.5, 127.8, 127.3, 122.7, 122.0, 118.6, 111.3, 28.2, 15.8. HRMS (ESI) m/z [M+H]+ Calcd for C15H15N2S (255.0951), found: 255.0954. 2-((3,5-dimethylphenyl)thio)-1H-benzo[d]imidazole (4f) According to TP2, the residue was purified by flash chromatography on silica gel (petroleum ether/ethyl acetate = 2:1) to give the target compound 4f as a white soild (107 mg, yield = 84%). mp: 178-180 oC. 1H NMR (400 MHz, DMSO-d6, TMS): δ

ACS Paragon Plus Environment

Page 20 of 33

Page 21 of 33 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Organic Chemistry

(ppm) 12.71 (s, 1H), 7.57 (s, 1H), 7.43 (s, 1H), 7.15 (d, 4H, J = 12.0 Hz), 6.99 (s, 1H), 7.17 (s, 2H), 2.25 (s, 3H), 2.23 (s, 3H).

13C

NMR (100 MHz, DMSO-d6, TMS): δ

(ppm) 147.6, 144.2, 139.3, 135.8, 130.7, 130.4, 129.7, 122.9, 122.0, 118.7, 111.4, 21.1. HRMS (ESI) m/z [M+H]+ Calcd for C15H15N2S (255.0951), found: 255.0957. 2-((4-chlorophenyl)thio)-1H-benzo[d]imidazole (4g) According to TP2, the residue was purified by flash chromatography on silica gel (petroleum ether/ethyl acetate = 2:1) to give the target compound 4g as a white soild (105 mg, yield = 81%). mp: 220-222 oC. 1H NMR (400 MHz, DMSO-d6, TMS): δ (ppm) 12.82 (s, 1H), 7.60-7.50 (m, 5H), 7.44 (d, 1H, J = 8.0 Hz), 7.23-7.16 (m, 2H). 13C

NMR (100 MHz, DMSO-d6, TMS): δ (ppm) 146.7, 144.1, 135.8, 133.6, 133.5,

130.5, 130.0, 123.1, 122.1, 118.8, 111.5. HRMS (ESI) m/z [M+H]+ Calcd for C13H10ClN2S (261.0248), found: 261.0253. 2-((4-bromophenyl)thio)-1H-benzo[d]imidazole (4h) According to TP2, the residue was purified by flash chromatography on silica gel (petroleum ether/ethyl acetate = 2:1) to give the target compound 4h as a white soild (125 mg, yield = 82%). mp: 213-215 oC. 1H NMR (400 MHz, DMSO-d6, TMS): δ (ppm) 12.84 (s, 1H), 7.63 (d, 3H, J = 8.0 Hz), 7.46 (d, 3H, J = 8.0 Hz), 7.21 (s, 2H). 13C

NMR (100 MHz, DMSO-d6, TMS): δ (ppm) 146.5, 144.1, 135.8, 133.7, 132.9,

131.2, 123.1, 122.1, 122.0, 118.8, 111.5. HRMS (ESI) m/z [M+H]+ Calcd for C13H10BrN2S (304.9743), found: 304.9745. 4-((1H-benzo[d]imidazol-2-yl)thio)benzonitrile (4i) According to TP2, the residue was purified by flash chromatography on silica gel (petroleum ether/ethyl acetate = 2:1) to give the target compound 4i as a white soild (90 mg, yield = 72%). mp: 178-180 oC. 1H NMR (400 MHz, DMSO-d6, TMS): δ (ppm) 13.17 (s, 1H), 7.84 (d, 2H, J = 8.0 Hz), 7.67 (s, 1H), 7.55 (d, 3H, J = 8.0 Hz),

ACS Paragon Plus Environment

The Journal of Organic Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

7.26 (s, 2H).

13C

NMR (100 MHz, DMSO-d6, TMS): δ (ppm) 144.2, 143.8, 140.4,

135.8, 133.5, 129.6, 123.7, 122.5, 119.3, 118.9, 111.9, 110.0. HRMS (ESI) m/z [M+H]+ Calcd for C14H10N3S (252.0590), found: 252.0593. 2-((2,4-dimethylphenyl)thio)-1H-benzo[d]imidazole (4j) According to TP2, the residue was purified by flash chromatography on silica gel (petroleum ether/ethyl acetate = 2:1) to give the target compound 4j as a white soild (102 mg, yield = 80%). mp: 177-179 oC. 1H NMR (400 MHz, DMSO-d6, TMS): δ (ppm) 12.51 (s, 1H), 7.51 (s, 1H), 7.41 (d, 2H, J = 8.0 Hz), 7.18 (s, 1H), 7.14 (d, 2H, J = 8.0 Hz), 7.06 (d, 1H, J = 8.0 Hz), 2.34 (s, 3H), 2.30 (s, 3H). 13C NMR (100 MHz, DMSO-d6, TMS): δ (ppm) 148.6, 144.3, 140.9, 139.6, 135.8, 134.8, 132.1, 128.2, 126.0, 122.5, 121.8, 118.3, 111.2, 21.1, 20.8. HRMS (ESI) m/z [M+H]+ Calcd for C15H15N2S (255.0951), found: 255.0954. 2-((2-chloro-4-methylphenyl)thio)-1H-benzo[d]imidazole (4k) According to TP2, the residue was purified by flash chromatography on silica gel (petroleum ether/ethyl acetate = 2:1) to give the target compound 4k as a white soild (107 mg, yield = 78%). mp: 161-163 oC. 1H NMR (400 MHz, DMSO-d6, TMS): δ (ppm) 12.82 (s, 1H), 7.57 (s, 1H), 7.44 (s, 2H), 7.34 (d, 1H, J = 8.0 Hz), 7.18 (t, 3H, J = 8.0 Hz), 2.31 (s, 3H). 13C NMR (100 MHz, DMSO-d6, TMS): δ (ppm) 146.2, 144.2, 140.8, 135.8, 134.7, 133.7, 131.0, 129.4, 127.1, 123.0, 122.1, 118.7, 111.5, 20.7. HRMS (ESI) m/z [M+H]+ Calcd for C14H12ClN2S (275.0404), found: 275.0408. 2-(benzo[d][1,3]dioxol-5-ylthio)-1H-benzo[d]imidazole (4l) According to TP2, the residue was purified by flash chromatography on silica gel (petroleum ether/ethyl acetate = 2:1) to give the target compound 4l as a white soild (70 mg, yield = 52%). mp: 185-187 oC. 1H NMR (400 MHz, DMSO-d6, TMS): δ (ppm) 12.49 (s, 1H), 7.53 (s, 1H), 7.40 (s, 1H), 7.19-7.13 (m, 4H), 7.00 (d, 1H, J = 8.0

ACS Paragon Plus Environment

Page 22 of 33

Page 23 of 33 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Organic Chemistry

Hz), 6.11 (s, 2H).

13C

NMR (100 MHz, DMSO-d6, TMS): δ (ppm) 149.2, 148.9,

148.5, 144.2, 135.8, 128.3, 122.6, 121.9, 121.6, 118.4, 114.1, 111.3, 109.6, 102.2. HRMS (ESI) m/z [M+H]+ Calcd for C14H11N2O2S (271.0536), found: 271.0533. 2-((3-bromophenyl)thio)-1H-benzo[d]imidazole (4m) According to TP2, the residue was purified by flash chromatography on silica gel (petroleum ether/ethyl acetate = 2:1) to give the target compound 4m as a white soild (140 mg, yield = 92%). mp: 144-146 oC. 1H NMR (400 MHz, DMSO-d6, TMS): δ (ppm) 12.93 (s, 1H), 7.70 (s, 1H), 7.57 (d, 2H, J = 8.0 Hz), 7.48 (d, 2H, J = 8.0 Hz), 7.37 (t, 1H, J = 8.0 Hz), 7.21 (d, 2H, J = 4.0 Hz).

13C

NMR (100 MHz, DMSO-d6,

TMS): δ (ppm) 146.0, 144.1, 135.8, 134.4, 133.2, 131.9, 131.4, 130.3, 123.3, 122.7, 122.2, 118.9, 111.6. HRMS (ESI) m/z [M+H]+ Calcd for C13H10BrN2S (304.9743), found: 304.9746. 5,6-dimethyl-2-(phenylthio)-1H-benzo[d]imidazole (4n) According to TP2, the residue was purified by flash chromatography on silica gel (petroleum ether/ethyl acetate = 2:1) to give the target compound 4n as a white soild (98 mg, yield = 77%). mp: 167-169 oC. 1H NMR (400 MHz, DMSO-d6, TMS): δ (ppm) 12.64 (s, 1H), 7.43-7.31 (m, 7H), 2.29 (s, 6H). 13C NMR (100 MHz, DMSO-d6, TMS): δ (ppm) 144.8, 143.0, 132.8, 130.7, 129.9, 128.1, 118.9, 111.5, 20.4. HRMS (ESI) m/z [M+H]+ Calcd for C15H15N2S (255.0951), found: 255.0956. 6-methyl-2-(phenylthio)-1H-benzo[d]imidazole (4o) According to TP2, the residue was purified by flash chromatography on silica gel (petroleum ether/ethyl acetate = 2:1) to give the target compound 4o as a white soild (107 mg, yield = 89%). mp: 135-137 oC. 1H NMR (400 MHz, DMSO-d6, TMS): δ (ppm) 12.71 (s, 1H), 7.47-7.24 (m, 7H), 7.01 (d, 1H, J = 8.0 Hz), 2.40 (s, 3H).

13C

NMR (100 MHz, DMSO-d6, TMS): δ (ppm) 145.8, 144.6, 136.0, 132.2, 131.2, 130.0,

ACS Paragon Plus Environment

The Journal of Organic Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

128.4, 124.5, 123.6, 118.5, 111.2, 21.7. HRMS (ESI) m/z [M+H]+ Calcd for C14H13N2S (241.0794), found: 241.0791. 6-bromo-2-(phenylthio)-1H-benzo[d]imidazole (4p) According to TP2, the residue was purified by flash chromatography on silica gel (petroleum ether/ethyl acetate = 2:1) to give the target compound 4p as a yellow oil (109 mg, yield = 72%). 1H NMR (400 MHz, CDCl3, TMS): δ (ppm) 7.46 (t, 3H, J = 8.0 Hz), 7.22 (s, 5H).

13C

NMR (100 MHz, CDCl3, TMS): δ (ppm) 149.4, 139.2,

136.9, 132.4, 128.8, 128.4, 128.0, 124.7, 116.4, 114.6, 114.5. HRMS (ESI) m/z [M+H]+ Calcd for C13H10BrN2S (304.9743), found: 304.9740. 2-(phenylthio)benzo[d]thiazole (4q) According to TP2, the residue was purified by flash chromatography on silica gel (petroleum ether/ethyl acetate = 2:1) to give the target compound 4q as a colorless oil (34 mg, yield = 28%). 1H NMR (400 MHz, CDCl3, TMS): δ (ppm) 7.80 (d, 1H, J = 8.0 Hz), 7.66 (d, 2H, J = 4.0 Hz), 7.56 (d, 1H, J = 8.0 Hz), 7.44-7.37 (m, 3H), 7.32 (t, 1H, J = 8.0 Hz), 7.18 (d, 1H, J = 8.0 Hz). 13C NMR (100 MHz, CDCl3, TMS): δ (ppm) 168.7, 152.8, 134.5, 134.3, 129.5, 128.9, 128.9, 125.1, 123.3, 120.9, 119.7. HRMS (ESI) m/z [M+H]+ Calcd for C13H10NS2 (244.0249), found: 244.0245. phenyl-N,N-dimethyl-N'-phenylcarbamimidothioate (4r): According to TP2, the residue was purified by flash chromatography on silica gel (petroleum ether/ethyl acetate = 4:1) to give the target compound 4r as a yellow oil (42 mg, yield = 33%). 1H NMR (400 MHz, CDCl3, TMS): δ (ppm) 7.13-7.04 (m, 7H), 6.85 (t, 1H, J = 8.0 Hz), 6.66 (d, 2H, J = 4.0 Hz), 3.01 (s, 6H). 13C NMR (100 MHz, CDCl3, TMS): δ (ppm) 152.3, 150.3, 133.1, 129.9, 128.6, 128.0, 126.3, 121.9, 121.8, 39.4. HRMS (ESI) m/z [M+H]+ Calcd for C15H17N2S (257.1107), found: 257.1111.

ACS Paragon Plus Environment

Page 24 of 33

Page 25 of 33 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Organic Chemistry

ACKNOWLEDGMENT We thank the foundation support from National Natural Science Foundation of China (21302150), Chen-Guang program from Hubei Association for Science and Technology, Ministry-of-Education Key Laboratory for the Synthesis and Application of Organic Functional Molecules, Hubei University (KLSAOFM1810).

We also

thank Prof. Wenjing Xiao at Central China Normal University for generous NMR analysis support.

Supporting Information: concise list of 1H and

13C

NMR of products, X-ray

crystallography data and CIF file of 4a found in the SI.

REFERENCES (1) (a) Beard, R. L.; Colon, D. F.; Song, T. K.; Davies, P. J.; Kochhar, D. M.; Chandraratna, R. A. Synthesis and Structure-Activity Relationships of Retinoid X Receptor Selective Diaryl Sulfide Analogs of Retinoic Acid. J. Med. Chem. 1996, 39, 3556-3563. (b) Liu, G.; Link, J.; Pei, Z.; Reilly, E. B.; Leitza, S.; Nguyen, B.; Marsh, K. C.; Okasinski, G. F.; von Geldern, T. W.; Ormes, M. Discovery of Novel p-Arylthio Cinnamides as Antagonists of Leukocyte Function-Associated Antigen-1/Intracellular Adhesion Molecule-1 Interaction. 1. Identification of an Additional Binding Pocket Based on an Anilino Diaryl Sulfide Lead. J. Med. Chem. 2000, 43, 4025-4040. (c) Liu, G.; Huth, J. R.; Olejniczak, E. T.; Mendoza, R.; DeVries, P.; Leitza, S.; Reilly, E. B.; Okasinski, G. F.; Fesik, S. W.; von Geldern, T. W. Novel p-Arylthio Cinnamides as Antagonists of Leukocyte

ACS Paragon Plus Environment

The Journal of Organic Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 26 of 33

Function-Associated Antigen-1/Intracellular Adhesion Molecule-1 Interaction. 2. Mechanism of Inhibition and Structure-Based Improvement of Pharmaceutical Properties. J. Med. Chem. 2001, 44, 1202-1210. (d) De Martino, G.; Edler, M. C.; La Regina, G.; Coluccia, A.; Barbera, M. C.; Barrow, D.; Nicholson, R. I.; Chiosis, G.; Brancale, A.; Hamel, E. New Arylthioindoles:  Potent Inhibitors of Tubulin Polymerization. 2. Structure-Activity Relationships and Molecular Modeling Studies. J. Med. Chem. 2006, 49, 947-954. (e) Chen, H.-Y.; Peng, W.-T.; Lee, Y.-H.; Chang, Y.-L.; Chen, Y.-J.; Lai, Y.-C.; Jheng, N.-Y.; Chen, H.-Y. Use of Base Control to Provide High Selectivity between Diaryl Thioether and Diaryl Disulfide for C-S Coupling Reactions of Aryl Halides and Sulfur and a Mechanistic Study. Organometallics 2013, 32, 5514-5522. (2) (a) Carcanague, D.; Shue, Y.-K.; Wuonola, M. A.; Uria-Nickelsen, M.; Joubran, C.; Abedi, J. K.; Jones, J.; Kühler, T. C. Novel Structures Derived from 2-[[(2-Pyridyl)methyl]thio]-1H-benzimidazole as Anti-Helicobacter pylori Agents, Part 2. J. Med. Chem. 2002, 45, 4300-4309. (b) Huang, W.; Yang, G.-F. Microwave-Assisted,

One-Pot

Syntheses

and

Fungicidal

Activity

of

Polyfluorinated 2-Benzylthiobenzothiazoles. Bioorgan. Med. Chem. 2006, 14, 8280-8285. (c) Huang, W.; Zhao, P.-L.; Liu, C.-L.; Chen, Q.; Liu, Z.-M.; Yang, G.-F. Design, Synthesis, and Fungicidal Activities of New Strobilurin Derivatives. J. Agr. Food. Chem. 2007, 55, 3004-3010. (d) Bennamane, N.; Zaïoua, K.; Akacem, Y.; Kaoua, R.; Bentarzi, Y.; Bakhta, S.; Nedjar-Kolli, B.; Ouhab, L. Synthesis of Benzimidazol-2-Thiones from Dimedone : An Unexpected

ACS Paragon Plus Environment

Page 27 of 33 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Organic Chemistry

Cyclisation into a Five-Membered Ring. Org. Commun. 2009, 2, 49-59. (e) Shin, J. M.; Sachs, G.; Cho, Y.-m.; Garst, M. 1-Arylsulfonyl-2-(Pyridylmethylsulfinyl) Benzimidazoles as New Proton Pump Inhibitor Prodrugs. Molecules 2009, 14, 5247-5280. (3) (a) Oksuzoglu, E.; Tekiner-Gulbas, B.; Alper, S.; Temiz-Arpaci, O.; Ertan, T.; Yildiz, I.; Diril, N.; Sener-Aki, E.; Yalcin, I. Some Benzoxazoles and Benzimidazoles as DNA Topoisomerase I and II Inhibitors. J. Enzym. Inhib. Med. Ch. 2008, 23, 37-42. (b) Maske, P.; Lokapure, S.; Nimbalkar, D.; Disouza, J. Synthesis and Antiprotozoal Activity of Nitro and Halogeno Substituted Some Novel Mercaptobenzimidazole Derivatives. Der Pharma Chemica 2012, 4, 1283-1287. (c) Liu, H.; Jiang, X. Transfer of Sulfur: From Simple to Diverse. Chem-Asian. J. 2013, 8, 2546-2563. (d) Bianxiang, Z.; Kai, C.; Lihua, Y.; Ruijie, Z.; Lina, Z.; Ruixue, S. C-S Coupling Reaction of Heteroaromatic Compounds via Copper Catalyst. Chin. J. Org. Chem. 2015, 35, 905-909. (e) Vessally, E.; Mohammadi, R.; Hosseinian, A.; Didehban, K.; Edjlali, L. S-Arylation of 2-Mercaptobenzazoles: A Comprehensive Review. J. Sulfur Chem. 2018, 39, 443-463. (f) Maske, P.; Lokapure, S.; Nimbalkar, D.; Disouza, J. Synthesis and Antiprotozoal Activity of Nitro and Halogeno Substituted Some Novel Mercaptobenzimidazole Derivatives. Der Pharma Chemica 2012, 4, 1283-1287. (g) Zhang, L.; Fan, J.; Vu, K.; Hong, K.; Le Brazidec, J.-Y.; Shi, J.; Biamonte, M.; Busch, D. J.; Lough, R. E.; Grecko, R. 7’-Substituted Benzothiazolothio- and

ACS Paragon Plus Environment

The Journal of Organic Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 28 of 33

Pyridinothiazolothio-Purines as Potent Heat Shock Protein 90 Inhibitors. J. Med. Chem. 2006, 49, 5352-5362. (4) Allin, S. M.; Bowman, W. R.; Karim, R.; Rahman, S. S. Aromatic Homolytic Substitution using Solid Phase Synthesis. Tetrahedron 2006, 62, 4306-4316. (5) (a) Schwab, R. S.; Singh, D.; Alberto, E. E.; Piquini, P.; Rodrigues, O. E.; Braga, A. L. C-S Cross-Coupling of Thiols with Aryl Iodides under Ligand-Free Conditions using Nano Copper Oxide as a Recyclable Catalyst in Ionic Liquid. Catal. Sci. Technol. 2011, 1, 569-573. (b) Sekar, R.; Srinivasan, M.; Marcelis, A. T.; Sambandam, A. S-Arylation of Mercaptobenzimidazoles using Cu (I) Catalysts-Experimental and Theoretical Observations. Tetrahedron Lett. 2011, 52, 3347-3352. (c) Panda, N.; Jena, A. K.; Mohapatra, S. Heterogeneous Magnetic Catalyst for S-Arylation Reactions. Appl. Catal. A-Gen. 2012, 433, 258-264. (d) Bianxiang, Z.; Lihua, Y.; Ruixue, S.; Yongqiang, K. Synthesis of Heterocyclic Aromatic Sulfides under Microwave Irradiation. Chin. J. Org. Chem. 2016, 36, 352-357. (e) Zhang, B.; Kang, Y.; Yang, L.; Chen, X. A S-Arylation of 2-Mercaptoazoles with Diaryliodonium Triflates under Metal-Free and Base-Free Conditions. ChemistrySelect 2016, 1, 1529-1532. (f) Tan, B. Y.-H.; Teo, Y.-C. Ligand-Free

CuI-Catalyzed

Chemoselective

S-Arylation

of

2-Mercaptobenzimidazole with Aryl Iodides. Synlett 2018, 29, 2056-2060. (6) Katritzky, A. R.; Akutagawa, K. A New Synthetic Method for the 2-Substitution of N-Unsubstituted Benzimidazoles: Formaldehyde as a Versatile Protecting Agent for Heterocyclic NH1. J. Org. Chem. 1989, 54, 2949-2952.

ACS Paragon Plus Environment

Page 29 of 33 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Organic Chemistry

(7) Kibriya, G.; Mondal, S.; Hajra, A. Visible-Light-Mediated Synthesis of Unsymmetrical Diaryl Sulfides via Oxidative Coupling of Arylhydrazine with Thiol. Org. Lett. 2018, 20, 7740-7743. (8) (a) Lam, P. Y.; Clark, C. G.; Saubern, S.; Adams, J.; Winters, M. P.; Chan, D. M.; Combs, A. New Aryl/Heteroaryl C-N Bond Cross-Coupling Reactions Via Arylboronic Acid/Cupric Acetate Arylation. Tetrahedron Lett. 1998, 39, 2941-2944. (b) Combs, A. P.; Saubern, S.; Rafalski, M.; Lam, P. Y. Solid Supported Arylheteroaryl C-N Cross-Coupling Reactions. Tetrahedron Lett. 1999, 40, 1623-1626. (c) Lam, P. Y.; Vincent, G.; Clark, C. G.; Deudon, S.; Jadhav, P. K. Copper-Catalyzed General C-N and C-O Bond Cross-Coupling with Arylboronic Acid. Tetrahedron Lett. 2001, 42, 3415-3418. (d) Lam, P. Y.; Vincent, G.; Bonne, D.; Clark, C. G. Copper-Promoted/Catalyzed C-N and C-O Bond Cross-Coupling with Vinylboronic Acid and Its Utilities. Tetrahedron lett. 2003, 44, 4927-4931. (e) Qiao, J. X.; Lam, P. Y. Copper-Promoted Carbon-Heteroatom Bond Cross-Coupling with Boronic Acids and Derivatives. Synthesis 2011, 2011, 829-856. (9) (a) Chen, S.; Huang, H.; Liu, X.; Shen, J.; Jiang, H.; Liu, H. Microwave-Assisted Efficient Copper-Promoted N-Arylation of Amines with Arylboronic Acids. J. Comb. Chem. 2008, 10, 358-360. (b) Rasheed, S.; Rao, D. N.; Das, P. Copper-Catalyzed Inter- and Intramolecular C-N Bond Formation: Synthesis of Benzimidazole-Fused Heterocycles. J. Org. Chem. 2015, 80, 9321-9327. (c) Dar’in, D.; Krasavin, M. The Chan-Evans-Lam N-Arylation of 2-Imidazolines. J.

ACS Paragon Plus Environment

The Journal of Organic Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Org. Chem. 2016, 81, 12514-12519. (d) Kumar, K. A.; Kannaboina, P.; Rao, D. N.; Das, P. Nickel-Catalyzed Chan-Lam Cross-Coupling: Chemoselective N-Arylation of 2-Aminobenzimidazoles. Org. Biomol. Chem. 2016, 14, 8989-8997. (e) Rao, D. N.; Rasheed, S.; Kumar, K. A.; Reddy, A. S.; Das, P. Copper-Catalyzed C-NH2 Arylation of 2-Aminobenzimidazoles and Related C-Amino-NH-azoles. Adv. Synth. Catal. 2016, 358, 2126-2133. (10)(a) Kondo, T.; Mitsudo, T.-a. Metal-Catalyzed Carbon-Sulfur Bond Formation. Chem. Rev. 2000, 100, 3205-3220. (b) Gangjee, A.; Zeng, Y.; Talreja, T.; McGuire, J. J.; Kisliuk, R. L.; Queener, S. F. Design and Synthesis of Classical and Nonclassical 6-Arylthio-2,4-diamino-5-ethylpyrrolo[2,3-d]pyrimidines as Antifolates. J. Med. Chem. 2007, 50, 3046-3053. (c) Correa, A.; Carril, M.; Bolm, C. Iron-Catalyzed S-Arylation of Thiols with Aryl Iodides. Angewandte Chemie 2008, 120, 2922-2925. (11)(a) Herradura, P. S.; Pendola, K. A.; Guy, R. K. Copper-Mediated Cross-Coupling of Aryl Boronic Acids and Alkyl Thiols. Org. Lett. 2000, 2, 2019-2022. (b) Savarin, C.; Srogl, J.; Liebeskind, L. S. A Mild, Nonbasic Synthesis of Thioethers. The Copper-Catalyzed Coupling of Boronic Acids with N-Thio(alkyl, aryl, heteroaryl)imides. Org. Lett. 2002, 4, 4309-4312. (c) Taniguchi, N. Aryl-or Alkylation of Diaryl Disulfides using Organoboronic Acids and a Copper Catalyst. Synlett 2006, 2006, 1351-1354. (12)(a) Dlin, E. A.; Averochkin, G. M.; Finko, A. V.; Vorobyeva, N. S.; Beloglazkina, E. K.; Zyk, N. V.; Ivanenkov, Y. A.; Skvortsov, D. A.; Koteliansky, V. E.;

ACS Paragon Plus Environment

Page 30 of 33

Page 31 of 33 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Organic Chemistry

Majouga,

A.

G.

Reaction

of

Arylboronic

Acids

with

5-Aryl-3-Substituted-2-Thioxoimidazolin-4-Ones. Tetrahedron Lett. 2016, 57, 5501-5504. (b) Mugnaini, C.; Manetti, F.; Esté, J. A.; Clotet-Codina, I.; Maga, G.; Cancio, R.; Botta, M.; Corelli, F. Synthesis and Biological Investigation of S-Aryl-S-DABO Derivatives as HIV-1 Inhibitors. Bioorg. Med. Chem. Lett. 2006, 16, 3541-3544. (c) Prokopcova, H.; Kappe, C. O. Palladium(0)-Catalyzed, Copper(I)-Mediated Coupling of Boronic Acids with Cyclic Thioamides. Selective Carbon-Carbon Bond Formation for the Functionalization of Heterocycles. J. Org. Chem. 2007, 72, 4440-4448. (d) Pulakhandam, S. K.; Katari, N. K.; Manda, R. P. R. J. Chem. Sci. 2017, 129, 203-210. (13) Liu, X.; Zhang, S. B.; Zhu, H.; Cheng, Y.; Peng, H. Y.; Dong, Z. B. Transition Metal-Promoted Synthesis of 2-Aryl/Heteroaryl-Thioquinazoline: C-S Bond Formation by “Chan-Lam Cross-Coupling” Reaction. Eur. J. Org. Chem. 2018, 4483-4489. (14)(a) Dong, Z.-B.; Liu, X.; Bolm, C. Copper-Catalyzed C(sp2)-S Coupling Reactions for the Synthesis of Aryl Dithiocarbamates with Thiuram Disulfide Reagents. Org. Lett. 2017, 19, 5916-5919. (b) Liu, X.; Cao, Q.; Xu, W.; Zeng, M. T.; Dong, Z. B. Nickel-Catalyzed C-S Coupling: Synthesis of Diaryl Sulfides Starting from Phenyldithiocarbamates and Iodobenzenes. Eur. J. Org. Chem. 2017, 2017, 5795-5799. (c) Liu, X.; Liu, M.; Xu, W.; Zeng, M.-T.; Zhu, H.; Chang, C.-Z.; Dong, Z.-B. An Environmentally Benign and Efficient Synthesis of Substituted

Benzothiazole-2-Thiols,

Benzoxazole-2-Thiols,

ACS Paragon Plus Environment

and

The Journal of Organic Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 32 of 33

Benzimidazoline-2-Thiones in Water. Green Chem. 2017, 19, 5591-5598. (d) Chang, C.-Z.; Liu, X.; Zhu, H.; Wu, L.; Dong, Z.-B. Copper-Catalyzed and Air-Mediated Mild Cross-Dehydrogenative Coupling of Aryl Thioureas and Dialkyl H-Phosphonates: The Synthesis of Thiophosphonates. J. Org. Chem. 2018, 83, 13530-13535. (e) Liu, X.; Zhang, S.-B.; Zhu, H.; Dong, Z.-B. Copper (I)-Catalyzed Tandem One-Pot Synthesis of 2-Arylthiobenzothiazoles and 2-Arylthiobenzoxazoles in Water. J. Org. Chem. 2018, 83, 11703-11711. (f) Zhang, S.-B.; Liu, X.; Gao, M.-Y.; Dong, Z.-B. One-Pot Synthesis of 2-Benzyl/2-Allyl-Substituted

Thiobenzoazoles

using

Transition-Metal-Free

Conditions in Water. J. Org. Chem. 2018, 83, 14933-14941. (15)(a) Cheng, Y.; Liu, X.; Dong, Z. B. Phenyldithiocarbamates: Efficient Sulfuration Reagents in the Chan-Lam Coupling Reaction. Eur. J. Org. Chem. 2018, 2018, 815-820. (b) Gao, M. Y.; Xu, W.; Zhang, S. B.; Li, Y. S.; Dong, Z. B. Synthesis of Phenyl Dithiocarbamates Starting from Sodium Dialkyldithiocarbamates and Aryl Boronic Acids: a Copper Catalyzed S-Arylation. Eur. J. Org. Chem. 2018, 2018, 6693-6698. (16)Nishiura, K.; Urawa, Y.; Soda, S. N-Arylation of Benzimidazole with Arylboronate, Boroxine and Boronic Acids. Acceleration with an Optimal Amount of Water. Adv. Synth. Catal. 2004, 346, 1679-1684. (17)(a) Taniguchi, N. Convenient Synthesis of Unsymmetrical Organochalcogenides Using Organoboronic Acids with Dichalcogenides via Cleavage of the S-S, Se-Se, or Te-Te Bond by a Copper Catalyst. J. Org. Chem. 2007, 72, 1241-1245. (b) Xu,

ACS Paragon Plus Environment

Page 33 of 33 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Organic Chemistry

H.-J.; Zhao, Y.-Q.; Feng, T.; Feng, Y.-S. Chan-Lam-Type S-Arylation of Thiols with Boronic Acids at Room Temperature. J. Org. Chem. 2012, 77, 2878-2884. (c) King, A. E.; Brunold, T. C.; Stahl, S. S. Mechanistic Study of Copper-Catalyzed Aerobic Oxidative Coupling of Arylboronic Esters and Methanol: Insights into an Organometallic Oxidase Reaction. J. Am. Chem. Soc. 2009, 131, 5044-5045. (d) Vantourout, J. C.; Miras, H. N.; Isidro-Llobet, A.; Sproules, S.; Watson, A. J. Spectroscopic Studies of the Chan-Lam Amination: A Mechanism-Inspired Solution to Boronic Ester Reactivity. J. Am. Chem. Soc. 2017, 139, 4769-4779. (e) King, A. E.; Ryland, B. L.; Brunold, T. C.; Stahl, S. S. Kinetic and Spectroscopic Studies of Aerobic Copper (II)-Catalyzed Methoxylation of Arylboronic Esters and Insights into Aryl Transmetalation to Copper (II). Organometallics 2012, 31, 7948-7957.

ACS Paragon Plus Environment