N E W FOR CHEMICAL PROCESS LINES
A pipe designed to carry corrosive fluids under high temperatures and high pressure... Johns -Manville
CHEMTITE PIPE Now, after having proved its superiority in over 200 test installations, J-M Chemtite® Pipe is available to the chemical industry. Designed specifically to solve the problems of transporting highly-corrosive liquids, this pipe offers the maximum in economy and efficiency. Chemtite Pipe is a mandrel-wound, asbestos-reinf ο reed phenolic and epoxy pipe. It is manufactured by a unique "Pyro-Press" technique that insures good surface finish and close-tolerance dimensional control. Strong, flexible, abrasion-resistant asbestos fibers are combined with heat, pressure and chemically-resistant thermosetting resins. This results in a pipe with maximum corrosion resistance plus the ability to withstand pressures from a full vacuum to over 150 psi and temperatures from —50F. to +300F. It also has excellent thermal shock and can be steam-cleaned. Light in weight and extremely easy to handle, long-length Chemtite can be installed quickly and eas ily. Its high physical strength and light weight permit its use for high overhead lines. Chemtite is easy to maintain, too. Chemtite will be available in four basic types and in six different sizes ( 1 " to 6"), in standard IPS outside diameters with an approximate schedule 40 wall, and with a wide variety of fittings which can be threaded
and/or cemented. Chemtite can indeed be the answer to your most complex piping configuration—and at a low cost, too! For details, mail in this coupon today! JOHNS-MANVILLE Box 362, IEC-11 New York 16, Ν. Υ. In Canada: Port Credit, Ontario Please send me, without obligation, full information and technical data on the new Johns-Manville Chemtite Pipe. NAME
TITLE
ADDRESS_
_
CITY
_
ZONE
COUNTY
STATE JOHNS-MANVILLE
JOHNS-MANVILLE JM
PRODUCTS
PLEASE VISIT OUR BOOTH AT THE CHEMICAL INDUSTRIES EXPOSITION
Circle No. 132 on Readers' Service Card VOL.
53, NO. 11
·
NOVEMBER 1961
115 A
