Click Nucleic Acid Mediated Loading of Prodrug Activating Enzymes in

Subscriber access provided by UNIV OF CAMBRIDGE

Article

Click Nucleic Acid Mediated Loading of Prodrug Activating Enzymes in PEG-PLGA Nanoparticles for Combination Chemotherapy Albert Harguindey, Shambojit Roy, Alexander W. Harris, Benjamin D. Fairbanks, Andrew P. Goodwin, Christopher N. Bowman, and Jennifer N. Cha Biomacromolecules, Just Accepted Manuscript • DOI: 10.1021/acs.biomac.9b00040 • Publication Date (Web): 18 Mar 2019 Downloaded from http://pubs.acs.org on March 18, 2019

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 31 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Biomacromolecules

Click Nucleic Acid Mediated Loading of Prodrug Activating Enzymes in PEG-PLGA Nanoparticles for Combination Chemotherapy Albert Harguindey,1 Shambojit Roy,1 Alexander W. Harris1, Benjamin D. Fairbanks,1 Andrew P. Goodwin,1,2 Christopher N. Bowman,1,2 Jennifer N. Cha1,2 * 1Department

of Chemical and Biological Engineering and 2Materials Science and Engineering Program, University of Colorado, Boulder

*To whom correspondence should be addressed: [email protected] KEYWORDS. Polymer, Click Nucleic Acids, Enzyme, Prodrug Activation

ABSTRACT The simultaneous delivery of multiple therapeutics to a single site has shown promise for cancer targeting and treatment. However, because of the inherent differences in charge and size between drugs and biomolecules, new approaches are required for colocalization of unlike components in one delivery vehicle. In this work, we demonstrate that triblock copolymers containing click nucleic acids (CNAs) can be used to simultaneously load a prodrug enzyme (cytosine deaminase, CodA) and a chemotherapy

ACS Paragon Plus Environment

1

Biomacromolecules 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 31

drug (doxorubicin, DOX) in a single polymer nanoparticle. CNAs are a synthetic analog of DNA comprised of a thiolene backbone and nucleotide bases that can hybridize to complementary strands of DNA. In this study, CodA was appended with complementary DNA sequences and fluorescent dyes to allow its encapsulation in PEG-CNA-PLGA nanoparticles. The DNA-modified CodA was found to retain its enzyme activity for converting prodrug 5-fluorocytosine (5-FC) to active 5-fluorouracil (5-FU) using a modified fluorescent assay. The DNA conjugated CodA was then loaded into the PEGCNA-PLGA nanoparticles and tested for cell cytotoxicity in the presence of the 5-FC prodrug. To study the effect of co-loading DOX and CodA within a single nanoparticle, cell toxicity assays were run to compare dually-loaded nanoparticles with nanoparticles loaded only with either DOX or CodA. We show that the highest level of cell death occurred when both DOX and CodA were simultaneously entrapped and delivered to cells in the presence of 5-FC.

INTRODUCTION Nanotechnology-based approaches have led to large progress in delivering therapeutic agents to cancerous sites in the body1 while reducing off-target side effects.1,2 To increase efficacy, combination therapies have been proposed to eradicate tumors before they develop problematic drug resistance.3–5 One such approach is to load multiple agents in the same nanoparticle, including chemically-unlike moieties such as hydrophilic nucleic acids or proteins and hydrophobic chemotherapy drugs such as doxorubicin or


2

Page 3 of 31 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Biomacromolecules

paclitaxel.3,6–9 This encapsulation approach is especially important for biomolecules that require protection from proteolytic degradation the body’s immune system.10,11 Entrapping both hydrophobic and hydrophilic agents in a single carrier is difficult due to their different solvent partition coefficients. While poly(lactic-co-glycolic acid) (PLGA) particles produced using oil-in-water emulsions have been used, these often suffer in vivo due to difficulties encountered in loading proteins, the overall long-term stability during circulation as well as difficulties with producing them at diameters less than 200 nm.12 Because of this, proteins are more often conjugated with polymers such as polyethylene glycol (PEG) or entrapped within a crosslinked or stimuli responsive nanoparticle.13 However, due to the inherently large differences in size and polarity between proteins and hydrophobic drugs, and despite numerous advances in bioconjugation techniques14,15, co-entrapment within a single delivery vehicle has only been achieved through particle formulations16–19

that rely on cationic polymers20,21 which can suffer due to rapid

elimination in vivo or show limited degree of success.22–31 In this work we show the use of synthetic nucleic acids-namely click nucleic acids or CNAs-to enable the simultaneous entrapment and delivery of a prodrug enzyme, cytosine deaminase (CodA), and the chemotherapy drug doxorubicin (DOX) in a single nanoparticle by using a PEG-CNA-PLGA block polymer. Click nucleic acids (CNAs) are a synthetic analog of DNA comprised of a thiolene backbone and nucleotide bases.32 We have recently shown that CNA in the appropriate solvent environment can hybridize to


3


Page 4 of 31

complementary strands of DNA.33 In addition, we recently demonstrated the successful synthesis and production of PEG-CNA-PLGA nanoparticles and their utility for loading both complementary strands of DNA along with pyrene as a preliminary study.34 In the work shown here, we have advanced our previous findings by co-entrapping protein therapeutics along with chemotherapy drugs in PEG-CNA-PLGA nanoparticles. To load CodA into the PEG-CNA-PLGA nanoparticles, we first attached complementary DNA sequences and dyes to the enzyme, work by Mirkin et al using DNA-modified proteins showed the structural integrity and functionality was maintained after similar conjugations.35 To ensure this continued to be true the DNA-modified CodA was tested for enzymatic activity with the prodrug 5-fluorocytosine (5-FC) using a modified fluorometric assay based on the o-phthaldehyde amino acid detection assay.36–38 The DNA conjugated CodA was then loaded into the PEG-CNA-PLGA nanoparticles and tested for cell cytotoxicity in the presence of 5-FC (Scheme 1). The effect of co-loading DOX and CodA within a single nanoparticle was also studied and compared to using nanoparticles loaded with either DOX or CodA alone showing that the highest level of cell death occurs when both are simultaneously entrapped and delivered to cells in the presence of 5-FC (Scheme 1). Scheme 1. Graphic representation of PEG-CNA-PLGA nanoparticles co-loaded with hydrophilic

DNA-conjugated

prodrug

activating

enzymes

and

hydrophobic

chemotherapy drugs.


4

Page 5 of 31 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Biomacromolecules

MATERIALS AND METHODS Materials. AlexaFluor488 NHS ester (Invitrogen), DNA sequences (Integrated DNA Tech.), ammonium chloride (Fisher), amphicillin (Sigma), biuret reagent (Sigma), coomassie stain -simplyblue safestain- (Invitrogen), DBCO-NHS (Sigma), doxorubicin (DOX, Tokyo chem. Indus.), Dulbecco's Modified Eagle Medium (Gibco), fetal bovine serum (Gibco), fluorocytosine (5-FC, Sigma), fluorouracil (5-FU, Sigma), folin and coicalteu phenol reagent (Sigma), gel cassettes -NuPage 4-12%- (Life Tech.), imidazole (ChemImpex int'l Inc.), isopropyl β-D-thiogalactopyranoside (IPTG, Gold Biotech.), L-glutaminepenicillin-streptomycin solution (Sigma), loading buffer -LDS NuPage- (Invitrogen), MDAMB-468 cell line (ATCC), Ni-NTA Beads -HisPur- (Thermo), o-phtalaldehyde (Sigma), poly(lactic-co-glycolic acid) -RG502H- (PLGA, Sigma), thiolated poly(ethyleneglycol) (PEG-


5


Page 6 of 31

SH, Lysan Bio Inc.), trypsin-EDTA (GenDEPOT), tryptone (Becton Dickinson), yeast extract (Becton Dickinson). Cytosine deaminase (CodA) expression: E. Coli strain BL21(DE3) was used as the template for amplifying CodA gene using the forward and reverse primer sequence given below. The primers incorporate a HindIII site at the 5’ position and an XhoI site at the 3’ position of the amplified sequence. The amplification was done using a standard PCR technique with a 65°C annealing temperature. 5’-3’: aagcttGGCGGTGGCTCGAATAACGCTTTACAAACAATTATTAAC 3’-5’: ctcgagACGTTTGTAATCGATGGCTTCT Pet21B vector was digested for 1hr at 37°C with the mentioned restriction enzymes and the primers treated using a standard ligation mixture supplied by NEB. Finally the ligated plasmid was then transformed into the electrocompetent E. Coli DH5α using an Eppendorf eporator at 1300 V. The transformed E. Coli was then incubated overnight on an agar plate supplemented with Ampicillin as selection marker in order to create a 50% glycerol stock solution stored at -21°C. CodA production: CodA producing bacteria was pricked from the described glycerol stock and incubated in 5ml of LB supplemented with 1mg/ml Ampicillin overnight at 37°C in an orbital shaker. 1 ml of the activated bacteria was added to an Erlenmeyer flask containing 100 ml of LB with the same antibiotic supplementation and allowed to grow in the same incubation conditions until an absorbance of 0.7 at 600 nm was reached point


6

Page 7 of 31 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Biomacromolecules

at wich 100 µl of a 1M IPTG solution was added and allowed to express the protein in the same incubation conditions for 2.5 h. The solutions were centrifuged 5 min at 10000 g, the supernatant was discarded, and bacterial pellets were resuspended and collected in a total of 25 ml Equilibration Buffer. The bacterial suspension was sonicated at 25% output for 4 min in 1 min on/off cycles for 20 min and centrifuged at 12000 g and the supernatant was collected for protein purification. Protein purification: Ni-NTA beads were cleaned following company instructions. To collect the CodA proteins, the bacterial supernatants were reacted with the cleaned Ni beads and washed 2-3 times with wash buffer. Any absorbed proteins were released by mixing the cleaned beads in 200µl of elution buffer for 30 min in an end to end shaker and a last 2 min centrifugation at 700 g to obtain the purified CodA. Excess imidazole was then removed with a desalting column, final product concentration was assessed by its absorbance and stored at 4°C in PBS. CodA DNA and dye modification: Varying concentrations of the purified CodA in PBS was mixed with equal volume of Bicarbonate buffer to slightly increase the pH and reacted in a 1:5 CodA to DBCO-NHS, to increase the solubility DMSO was added to the mixture so that final DMSO concentration was of 30%. This was allowed to proceed 4 h at 4°C and without further purification further reacted with 5 molar equivalents of NHSAlexaFluor488 at 4 °C overnight. This was followed by 20 kDa MWCO Dialysis; it was found to be necessary to perform this step at 4°C to avoid protein degradation (data not


7


Page 8 of 31

reported). Dialysis was performed against 1 L of PBS changed at 2, 4, 8, and then approximately every 12 h. Samples of the dialysate were periodically taken in order to monitor the process up to a total dialysis time of 72 h. The purified DBCO and dye modified enzyme was then quantified by Ohnishi and Barr’s Lowry’s method -calibrated with raw CodA quantified by its extinction coefficient (Figure S1)- and then mixed with azido-DNA in a 1:5 ratio and left to react overnight at room temperature in an end to end shaker protected from light. Final product was then again followed by a dialysis purification and quantification as described previously. OPAME Assay: The developing solution was made by dissolving 270 mg (2 mmol) of ophthalaldehyde, 105 µl (1.5 mmol) of mercaptoethanol in 2.5 ml of ethanol and diluted to 50 ml with PBS. The solution was stored protected from light at room temperature and an aliquot filtered through a 0.22 µm PTFE filter before use. When an assay was to be performed equal volumes of the sample and the filtered developing reagent was mixed in an Eppendorf tube and left reacting in the dark for 30 min before fluorometrically assessing the concentration of an aliquot with 410 nm source excitation and a 473 nm read. Calibration was performed by varying concentrations of NH4Cl finding a linear response below 400 nM NH4Cl. The assay brightness was found to have a time response (Figure S2) so it was deemed necessary to run the assay 30-60 min after adding the reagent and for every run to include a calibration in parallel.


8

Page 9 of 31 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Biomacromolecules

Protein quantification: Protein was quantified by either an estimated 55550 cm-1 M-1 extinction coefficient39 at 380 nm or by an adapted Ohnishi and Barr modification of Lowry’s method.40 Briefly, 110 µl of Biuret reagent was mixed with 10 µl of protein solution and left reacting 10 min after which 5 µl of Folin and Coicalteu phenol reagent was added and mixed thoroughly. 100 µl of the final solution was used for the spectrometric analysis measuring the absorbance at 750 nm. Calibration was performed by using purified CodA protein quantified by abs as described above so that the results reported are selfconsistent. PEG-CNA(T10)-PLGA Polymer Nanoparticles (NPs): The copolymer was synthesized as previously reported and prior to use, anhydrously stored in a concentrated 50mg/ml DCM solution at -21°C. Next, polymer NPs were formulated by dissolving PEG-CNA-PLGA in methylene chloride (DCM) to a final concentration of 50 mg/ml. 100 µl of the polymer solution was then added to a ½ dram glass vial containing 500 µl of PBS and 100 µl of either clean DCM or a 250 µg/ml Doxorubicin (DOX) in DCM was further added according to the type of NPs being made. After vigorous shaking, the solution was heated up to 37°C in an aluminum heating block and maintained uncapped for 2 h; the temperature was then increased to 50°C and maintained 1 h to ensure evaporation of all remaining DCM. While stirring the solution was left to equilibrate to room temperature (RT) before centrifugation at 22000 g for 20 min. Supernatant was discarded and the nanoparticles were resuspended in the appropriate volume of buffer for the next step. Particle sizes


9


Page 10 of 31

were determined by nanoparticle tracking analysis, the results of which are shown in Figure S3. CodA entrapment in polymer nanoparticles: In a similar way to the previously reported DNA conjugation,34 DNA conjugated 100 pmol of CodA was loaded per mg of nanoparticles by mixing a 50 μl aliquot of the polymer nanoparticles, 20 μl of the modified enzyme and 30 μl of DMSO. The reactions were left overnight at 4°C, diluted to 1 ml with PBS and centrifuged for 20 min at 22000 g. After three washes, the final pellets were resuspended in 100 μl of PBS. The amounts of encapsulated protein and DOX were determined using calibration curves shown in Figures S4, S5 and S6. Cell culture: MDA-MB-468 breast cancer cells were seeded at 37 °C in a 5% CO2 enriched atmosphere with Dulbecco's Modified Eagle Medium supplemented with 10% (v/v) fetal bovine serum and 1% (v/v) penicillin-streptomycin. When cell density approached confluence, the cells were incubated with 5 ml of trypsin for 5-15 min and once detached centrifuged at 150 g for 5 min and resuspended in fresh media. Cell concentration was estimated by a dual chamber hemocytometer. 0.5 to 1 million cells were reseeded in a flask and 96 well plates were prepared by adding 100μl at 105 cells/ml to each well needed for the assay. Cells were left overnight after seeding before any further operation was performed. Cell viability assay: To the cells seeded in a 96 well plate, 90 µL of either fresh media or media supplemented with 5-FC was added. To that 10 µL of the appropriate concentration


10

Page 11 of 31 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Biomacromolecules

of nanoparticles to yield the desired final concentration was added followed by incubation for 24 h at 37°C. Next, the cells were washed with PBS and replaced with 100 µL of new media supplemented with MTT stock solution to contain 0.5 mg/ml of MTT. Results were obtained by an absorbance reading at 560 nm and a reference reading at 650 nm. Confocal imaging: Confocal microscopy slides were prepared analogously to the cell viability assay by first seeding 1 ml of MDA-MB-468 at 5 x 104 cells/ml in a 24 well plate pre-prepared to contain a glass slide. Cells where left to attach overnight followed by incubation for 24 h then incubated 24 h with 1mg/ml of NPs. Right before the 24 h mark 10ml of cell media was warmed up to room temperature and 10 µl of a previously prepared 0.2 mg/ml DAPI in DMSO (Stored at -21°C) was added together with 100 µl of DiD 1mg/ml in DMSO. DAPI and DiD staining was used to image the cell nuclei and membrane respectively. The staining media was discarded after 10 min of incubation with the cells and washed twice more with PBS before immediately preparing the samples for microscopy.

RESULTS AND DISCUSSION In this study, we first produced the prodrug enzyme cytosine deaminase (CodA) which catalyzes the deamination of cytosine to uracil in microorganisms in the pyrimidine synthetic pathway.41 For cancer therapy, CodA has been used to convert the prodrug fluorocytosine (5-FC) to the active drug fluorouracil (5-FU), which is believed to inhibit


11


Page 12 of 31

nucleotide synthetic enzyme thymidylate synthase.42 To produce CodA, we first expressed the protein in BL21(DE3) (E. Coli) by inserting the gene in a Pet21B vector using HindIII and Xhol as restriction enzymes followed by transfection through electroporation. Cells were subsequently stored as a glycerol stock and then the enzyme was produced by growing the cells in LB at 37°C and inducing with IPTG for 2.5 h when a 0.7 OD at 600 nm was reached. Cells were lysed and CodA proteins were collected and purified using NiNTA beads. The purity of the product was assessed by polyacrylamide gel electrophoresis (SDS-PAGE) (Figure 1a) where a single band of ~50 kDa was observed. The low toxicity of the prodrug 5-FC makes it an attractive therapy agent to target cancer cells, provided that the enzyme can be site-specifically delivered.24 In order to load CodA into our previously reported PLGA-CNA(T10)-PEG nanoparticles34 we first conjugated the protein with

polyadenine DNA strands so that the enzyme could

specifically bind to the polythymine CNA domain. In addition, to track protein loading within the polymer nanoparticles, the enzyme was further modified with the dye AlexaFluor488. To attach both DNA and dye to each protein, we reacted CodA first with five molar equivalents of NHS-DBCO at pH 8.2 in 30% DMSO for 4 h. Next, NHSAlexaFluor488 was directly added to the protein reactions using a 1:5 protein:dye molar ratio for 4 h. To prevent protein degradation all of the reactions were performed at 4°C. Removing excess dye and NHS-DBCO from the proteins was done by dialysis at 4°C for 72 h. The products of each step were characterized by SDS-PAGE and as shown in Figure


12

Page 13 of 31 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Biomacromolecules

1a, specific bands that correspond to each modification step (dye attachment followed by T10 or A10 conjugation) were detected. UV-Vis absorbance of the purified protein (Figure 1b) also confirms the successful conjugation of both the AlexaFluor488 dye and DNA oligonucleotides and based on calibration curves (Figure S4) we were able to determine ~ 1 dye molecule and ~3-4 DNA strands were attached per protein. In addition, a gel run with no Coomassie stain (Figure S7) showed the expected fluorescence from the successful addition of the AlexaFluor488 dye.

Figure 1. (a) SDS-PAGE gel of [1] protein ladder [2] unmodified CodA [3] CodA after DBCO and AlexaFluor488 conjugation and after reacting with [4] A10 [5] T10 DNA. (b, c) UV-Vis absorbance of the dye and DNA conjugated CodA. Next, the dye and DNA conjugated CodA enzymes were tested for converting 5-FC to 5-FU to determine if modifying the protein either inhibited or hindered activity. For this, while the traditional method is to detect a shift in the UV absorbance peak at 286 nm as


13


Page 14 of 31

5-FC is converted to 5-FU,43 the strong absorbance at 260 nm of the DNA attached to the enzyme (Figure 1b) obscured our ability to use UV-Vis to monitor activity. Therefore, a common fluorescence technique that detects the presence of primary amines was employed since ammonia is a byproduct of the 5-FC deamination to 5-FU (Figure 2a). OPhthalaldehyde becomes fluorescent only when reacted with both a sulfhydryl group and a primary amine and thus can be used to assess the amount of 5-FC reacted with CodA and spectrometrically quantify37 the progress of the reaction. To ascertain that the presence of 5-FC, CodA alone, or DNA and dye conjugated CodA does not yield a fluorescent signal in the presence of o-phthalaldehyde and mercaptoethanol (OPAME), we reacted 60 µl of each of the control substrates with 60 µl of the OPAME solution (2 mmol o-phthalaldehyde, 1.5 mmol mercaptoethanol and 2.5 ml EtOH) diluted to a final volume of 50 ml with PBS. Next, the reactions were incubated at room temperature in the dark for 30 min followed by measuring fluorescence at 473 nm (405 nm excitation). As shown in Figure 2b and Figure S2, little to no measurable fluorescence could be detected indicating that the presence of amine groups on the enzyme or prodrugs alone could not generate any fluorescence in the OPAME assay. Next, 10 nM CodA (native, dye, DNA and dye conjugated) enzymes were reacted with 500 μM 5-FC and incubated in PBS at 37 °C while being continuously vigorously mixed in an orbital shaker. At varying time points, aliquots were removed and assayed using the OPAME test as described above. In order to determine the amount of ammonia being


14

Page 15 of 31 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Biomacromolecules

produced over time which should be in equimolar amounts to the amount of 5-FC converted to 5-FU, calibration curves with NH4Cl were used (Figure S8) for each collected time point. Because the intensity of the fluorescence response was found to decrease after 30-60 min, fluorescence measurements were run at a set point of 45 min after starting the OPAME tests (Figure S2).

Figure 2. (a) Scheme of the OPAME assay for determining 5-FC deamination rates (b) Plots showing the amount of 5-FC converted to 5-FU over time as determined by the


15


Page 16 of 31

OPAME assay. Samples were run with using 500 μM 5-FC or 5-FU in the absence of presence of 10 nM CodA. All reactions were run in triplicate with each point showing the average value obtained and subsequent error bars. As shown in Figure 2a, modifying the enzyme decreased the rate of 5-FC conversion, regardless of whether the modification was with dye alone or DNA-dye. Because of the nonspecific decrease in enzyme activity, we believe that the CodA activity is related in part to the denaturation of the protein during the first reaction with NHS-DBCO as the reactions were run at pH 8.2 and 30% DMSO which is also supported by the data shown in Figure S9. Despite this decrease in activity, however, the enzyme is still capable of activating a prodrug for cancer therapy. Next, to encapsulate both CodA and a chemotherapy drug such as DOX in a single carrier, the triblock copolymer PEG-CNA(T10)-PLGA was synthesized as reported in our previous work.18 PEG-CNA(T10)-PLGA nanoparticles were then formulated by emulsifying a solution of the polymer dissolved in methylene chloride with water and increasing the temperature slowly under high stirring until all the organic solvent is evaporated, leaving a nanoparticle mixture that could be collected and cleaned by high speed centrifugation. Next, 200 pmol of the DNA and dye conjugated CodA proteins were reacted with 2 mg of the PEG-CNA(T10)-PLGA nanoparticles at 30/70 DMSO/water overnight at 4°C followed by 3 consecutive washes to remove any free, non-encapsulated protein. An aliquot was lyophilized, weighed, and dissolved in pure DMSO to fluorometrically quantify the amount


16

Page 17 of 31 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Biomacromolecules

of CodA entrapped for a given mass of PEG-CNA(T10)-PLGA nanoparticles. As shown in Figure 3a, using these methods we were able to discern that ~46 pmol (23%) of the added DNA(A10)-CodA protein was encapsulated in ~ 2 mg of polymer nanoparticles. In contrast, when the CodA protein was conjugated with either dye alone or T10 DNA, only ~12 pmol (6%) could be encapsulated, showing again that specific DNA-CNA hybridization was needed to load the enzyme in the PEG-CNA-PLGA nanoparticles. In addition to loading the CodA enzyme in the polymer nanoparticles, the chemotherapy drug DOX could also be simultaneously entrapped by simply adding it in during the polymer nanoparticle synthesis. Since the fluorescence emission of DOX (610 nm) is separate from that of the AlexaFluor 488 dye on the enzyme, we were able to determine ~23 μg DOX could be loaded per mg of polymer nanoparticle (Figure 3b). The CodA and DOX loaded polymer nanoparticles were next evaluated for cell killing and compared to that of nanoparticles loaded with CodA or DOX alone. In this instance, breast cancer MDA-MB-468 cell lines were used in an MTT assay, and all tests were done in the presence of 5-FC. As controls, polymer nanoparticles were added with no DOX loaded or no addition of 5-FC; 5-FU was also tested alone as a comparison. For all tests, MDA-MB-468 cells were seeded and incubated overnight in 96 well plates at a cell density of 104 cells per well. Next, the various therapy agents (polymer nanoparticles, CodA, DOX, 5-FC, 5-FU) were added and incubated with the cells for 24 h at 37°C. Next, the media was removed, the cells were washed 2 times with PBS, and MTT assays were performed. As


17


Page 18 of 31

shown in Figure 3c, compared to blank PLGA-CNA-PEG nanoparticles in the presence of the prodrug 5-FC, the CodA loaded NPs show a significant increase in cell toxicity which can be attributed to the enzyme activation of the prodrug. In comparing the CodA loaded nanoparticles and 5-FC with 5-FU alone, highly comparable results in cell viability were obtained demonstrating that although 5-FU can diffuse into cells immediately upon adding to cells, the enzyme loaded polymer nanoparticles did not cause lower cell killing capabilities as compared to the drug alone, despite the need for the prodrug 5-FC to enter the polymer corona, diffuse to the enzyme embedded and react to produce the active drug 5-FU. The polymer nanoparticles loaded with enzyme seemed to also show higher cell killing as compared to enzyme alone with 5-FC, but this behavior may in part be attributed to an inherent cell toxicity the PEG-CNA(T10)-PLGA nanoparticles seem to show (‘Blank NPs + 5-FC’ as compared to the control of 5-FC alone) at the polymer nanoparticle concentrations used (Figure S10). Lastly, the polymer nanoparticles loaded with both CodA and DOX were tested with the MDA-MB-468 cells in the presence of the prodrug 5-FC. As shown in Figure Figure 3c, comparing either DOX alone or DOX loaded polymer nanoparticles, activating prodrugs in the vicinity of the cells along with DOX delivery showed significant enhancement of cell killing, supporting the hypothesis that delivering and activating multiple therapy agents using a single carrier can enhance cancer cell eradication.


18

Page 19 of 31 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Biomacromolecules

Figure 3. (a) Estimated entrapment of DNA modified CodA for both a polyadenine and polythymine modified enzyme. (b) Amount of Doxorubicin (c) MTT results of incubating polymer nanoparticles with cells. All samples contained 500 μM of 5-FC except for the first column (CodA) and the fourth one (5-FU). CodA and CodA+5FU samples contained 10 nM of the enzyme and 500 μM 5-FU. All nanoparticle samples contained ~1 mg/ml NPs. The DOX alone test contained 23 µg/ml of the drug in solution -the estimated amount encapsulated in the NPs. Blank and DOX NPs contained no enzyme. Error bars represent the standard error calculated from a n=6, we estimated a *p

Click Nucleic Acid Mediated Loading of Prodrug Activating Enzymes in

Recommend Documents