Constructing Unique Cathode Interface by Manipulating Functional

ppm, respectively by Karl-Fisher 831 Coulometer (Metrohm, Switzerland) and Karl-Fisher 798 GPT. Titrino (Metrohm, Switzerland). The cathode slurry was...
0 downloads 0 Views 3MB Size
Subscriber access provided by Kaohsiung Medical University

Energy Conversion and Storage; Plasmonics and Optoelectronics

Constructing Unique Cathode Interface by Manipulating Functional Groups of Electrolyte Additive for Graphite/LiNi Co Mn O Cells at High Voltage 0.6

0.2

0.2

2

Bo Liao, Xinliang Hu, Mengqing Xu, Hongying Li, Le Yu, Weizhen Fan, Lidan Xing, Youhao Liao, and Weishan Li J. Phys. Chem. Lett., Just Accepted Manuscript • Publication Date (Web): 29 May 2018 Downloaded from http://pubs.acs.org on May 29, 2018

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry Letters

Constructing Unique Cathode Interface by Manipulating Functional Groups of Electrolyte Additive for Graphite/LiNi0.6Co0.2Mn0.2O2 Cells at High Voltage Bo Liao,† ¶ Xinliang Hu,‡ ¶ Mengqing Xu,*† Hongying Li,† Le Yu,§ Weizhen Fan,§ Lidan Xing,† Youhao Liao,† and Weishan Li *†



Engineering Research Center of MTEES (Ministry of Education), Research Center of BMET

(Guangdong Province), Engineering Lab. of OFMHEB (Guangdong Province), Key Laboratory of ETESPG (GHEI), and Innovative Platform for ITBMD (Guangzhou Municipality), School of Chemistry and Environment, South China Normal University, Guangzhou, 510006, China ‡

School of Chemistry and Materials Science, Hubei Engineering University, Xiaogan Hubei 43200,

China §

Guangzhou Tinci Materials Technology Co. Ltd., Guangzhou, 510760, China

ABSTRACT A novel electrolyte additive, 1-(2-Cyanoethyl) pyrrole (CEP), has been investigated to improve electrochemical performance of graphite/LiNi0.6Co0.2Mn0.2O2 cells cycling up to 4.5 V, vs Li/Li+. The 4.5 V cycling results present that after 50 cycles up to 4.5 V capacity retention of the graphite/LiNi0.6Co0.2Mn0.2O2 cell is improved significantly from 27.4 % to 81.5 % when adding 1% CEP to baseline electrolyte (1 M LiPF6 in EC:EMC=1:2, by weight). Ex-situ characterization results support the mechanism of CEP for enhancing electrochemical performance. On the one hand, the 1

ACS Paragon Plus Environment

The Journal of Physical Chemistry Letters 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

significant enhancement is ascribed to a formed superior cathode interfacial film by preferential oxidation of CEP on the cathode electrode surface suppressing electrolyte decomposition at high voltage. On the other hand, the duo Lewis base functional groups can effectively capture dissociation product PF5 from LiPF6 with the presence of unavoidable trace amount of water or aprotic impurities in the electrolyte. Thus, this mitigates the HF generation which leads to reduction of transition metal dissolution in the electrolyte upon cycling at high voltage. The theoretical modeling suggests that CEP has a mechanism of stabilizing electrolyte via combination of –C≡N: functional group and H2O. The work presented here also shows NMR spectra analysis to prove the capability of CEP reducing HF generation and XPS analysis to observe cathode surface composition. TOC GRAPHICS

KEYWORDS: graphite/LiNi0.6Co0.2Mn0.2O2 cell, 1-(2-cyanoethyl) pyrrole, high voltage, cathode interfacial film, combination with H2O

1. INTRODUCTION Lithium ion batteries (LIBs) have become the focus of tremendous interest in the field of portable electronics, electric vehicles and large-scale energy storage.1,2 Due to the growing battery market for them, customers’ requirement is becoming more competitive in low-cost battery for higher energy 2

ACS Paragon Plus Environment

Page 2 of 30

Page 3 of 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Physical Chemistry Letters

density. Consequently, many researchers are focusing on the development of new cathode materials, such as LiNixCoyMn1-x-yO2 (0≤x, y, z