Conversion of Sugar Cane Molasses to 5-Hydroxymethylfurfural Using

Mar 8, 2018 - The compounds that fouled and hence deactivated the catalysts were analyzed by Fourier transform infrared (FTIR) spectroscopy The infrar...
2 downloads 11 Views 706KB Size
Subscriber access provided by - Access paid by the | UCSB Libraries

Conversion of Sugarcane Molasses to 5-Hydroxymethylfurfural using Molasses and Bagasse-derived Catalysts Joshua Howard, Darryn W. Rackemann, John P. Bartley, Chiara Samorì, and William O. S. Doherty ACS Sustainable Chem. Eng., Just Accepted Manuscript • DOI: 10.1021/ acssuschemeng.7b02746 • Publication Date (Web): 08 Mar 2018 Downloaded from http://pubs.acs.org on March 9, 2018

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 28 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

1

Conversion of Sugarcane Molasses to 5-Hydroxymethylfurfural using

2

Molasses and Bagasse-derived Catalysts

3

Joshua Howard †, Darryn W. Rackemann †, John P. Bartley †, Chiara Samori

4

O.S. Doherty † *

5

* Corresponding author.

6

email: [email protected]

7 8

9

10





and William

ORCID: 0000-0002-5975-8401

Centre for Tropical Crops and Biocommodities, Queensland University of Technology, 2

George St, Brisbane, QLD 4001, Australia ‡

Dipartimento di Chimica, University of Bologna, Via S.Alberto 163, Ravenna, Italy

KEYWORDS: sulfonated catalyst • molasses • carbohydrates • hydrolysis • HMF • humins

11

1

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 28

1

ABSTRACT: 5-hydroxymethylfurfural (HMF) is a suitable platform chemical for the

2

production of useful chemicals and fuels. This study examined the hydrolysis of mixtures of

3

sucrose, glucose and fructose (synthetic sugarcane molasses) and industrial molasses using

4

sulfonated carbon-based heterogeneous catalysts derived from sugarcane bagasse (B-SO3H)

5

and sugarcane molasses (M-SO3H). Microwave heating at 150 °C for 4 h produced 39 mol%

6

HMF yield with B-SO3H on the synthetic sugar solution. The addition of a molasses

7

pretreatment step, as well as, increasing the microwave power was necessary to achieve

8

similar HMF yields with the industrial molasses sample. The hydrolysis of molasses

9

pretreated with formic acid or HCl resulted in a slightly higher HMF yield than the hydrolysis

10

of molasses pretreated with H2SO4. The buffering capacity of the formic acid pretreated

11

molasses was lowered through dilution with water; and subsequently HMF yield was

12

increased to 64.3 mol% (170 °C, 3 h).

13

2

ACS Paragon Plus Environment

Page 3 of 28 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

1

2

INTRODUCTION Fossil resources derive dominant amounts of energy, synthetic products and chemicals

3

for consumers worldwide1-2 because of low product cost and ready availability. Unstable

4

crude oil prices and increasingly environmental impacts, such as rising CO2 levels3 and

5

propagation of unsustainable levels of non-biodegradable plastics, have helped drive the push

6

towards more sustainable ecological economies. Of the many alternatives for “green” energy

7

production (e.g., solar), biomass is the only suitable “green” reservoir of fixed carbon.4

8

Subsequently, there is current significant research interest in the production of fuels and

9

chemicals from renewable biomass resources.

10

There are numerous chemicals that can be produced via thermochemical processing of

11

biomass. A promising target is the production of high energy density l organics, such as 5-

12

hydroxymethylfurfural (HMF) and furfural,5-6 5-chloromethylfurfural,7 5-

13

bromomethylfurfural,8 ethoxymethylfurfural,9 furandicarboxylic acid and levulinic acid.10

14

HMF is a versatile platform chemical due to comprising of three constituent functional

15

groups including a hydroxymethyl (alcohol), formyl (aldehyde) and furan ring groups. These

16

three moieties present ready potential for further conversion and derivatisation. The

17

hydroxymethyl group which is connected to a furanic ring is functionally and structurally

18

similar to benzyl or furfuryl alcohol and hence can easily undergo oxidization (i.e., aldehyde

19

formation), esterification/etherification, and substitution reactions. As a consequence of these

20

attributes, HMF is a key building block chemical for the production of a range of essential

21

products including fuels and chemicals.

22

The synthesis of HMF from agricultural residues provides an avenue to generate

23

additional revenue for agricultural industries, while negating environmental issues and

24

limiting the reliance on fossil-based resources. The sugarcane industry has large quantities of

3

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 4 of 28

1

accessible and available renewable resources. Worldwide, > 1.8 billion tonnes of sugarcane is

2

processed yearly to produce ~250 million tonnes of sugar and a similar amount of residual

3

fibre. Approximately 40 million tonnes of molasses (> 40% sugar content) is also generated

4

in the manufacturing process, which is used for ethanol manufacture and animal feed

5

production. The development of thermochemical methods to produce higher value

6

commodities such as furanics from the carbohydrates found in molasses could provide

7

additional revenue streams to the sugarcane industry.

8

Numerous articles have reported the use of heterogeneous catalysts for HMF

9

production from the hexose sugars,11 due to the ease of the catalyst separation and

10

recyclability.12 It is advantageous to use sustainable and cheap materials to produce these

11

solid catalysts, as well as, inexpensive “green” solvents to enhance the conversion process.

12

The work by Ranoux and co-workers on the autocatalytic conversion of C-6 sugars to HMF,

13

does not require the use of additional catalysts and uses water as solvent medium.13 While

14

this approach represents a sound option to produce HMF, it necessitates reaction under

15

relatively high temperatures, and relatively high proportions of levulinic and formic acids are

16

also formed, which are not desirable.

17

Sulfonated amorphous carbon derived from biomass has been used to catalyse HMF

18

production from C-6 sugars.14 High HMF yields are generally obtained with these catalysts

19

when used in combination with ionic liquids and/or organic solvents or within biphasic

20

systems, although the use of these reaction media may increase the cost of industrial

21

applications. Sulfonated-based carbon catalysts obtained from sugarcane molasses and

22

bagasse have previously been examined for the production of biofuels from algae through the

23

esterification of fatty acids.15-16 These catalysts have not been studied for the conversion of

24

sugar-based mixtures of feedstocks (e.g., industrial sugarcane molasses) to HMF.

25

Consequentially, this study examined the conversion of synthetic molasses and sugarcane 4

ACS Paragon Plus Environment

Page 5 of 28 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

1

industrial molasses to HMF with microwave heating and catalysts derived from the sugar

2

manufacturing by-products – molasses and bagasse. The effect of molasses pretreatment

3

using HCl, H2SO4 and formic acid prior to hydrolysis was also examined. Possible benefits of

4

this pretreatment include; the removal of non-carbohydrate impurities, a reduction in

5

viscosity and improved surface contact with solid catalysts. The catalytic activity of formic

6

acid for HMF production was further studied under various operating conditions, and the

7

effect of molasses dilution on HMF yield was also evaluated.

8

EXPERIMENTAL

9

Materials

10

Sugarcane bagasse and molasses were obtained from Racecourse Sugar Mill in

11

Mackay, Queensland, Australia. The bagasse sample was dried to constant weight at 45 °C,

12

sized using a cutter grinder (Retsch SM100, Retsch GmBH, Germany) before being passed

13

through a 2.0 mm aperture screen. The bagasse sample consists of glucan (43.0 wt%), xylan

14

(17.4 wt%) and lignin (21.5 wt%). These values are similar to published works.17

15

The major constituents present in molasses are water (26.0 wt%), fructose (12.3 wt%),

16

glucose (11.2 wt%) and sucrose (24.2 wt%). The inorganic ions in molasses were determined

17

by inductively coupled plasma optical emission spectrometry (Vista MPX, Varian Inc.,

18

Victoria, Australia) included Al (0.54 mg/L), Ca (960 mg/L), Fe (6.2 mg/L), Mg (740 mg/L),

19

P (86 mg/L), K (3400 mg/L), Si (93 mg/L), Na (62 mg/L) and S (990 mg/L). These values are

20

within the expected range for molasses.18 A bulk sample of molasses was collected,

21

homogenized and stored at 4 °C.

22

D-(+)xylose, D-(+)fructose, D-(+)glucose, sucrose, and HMF were analytical grade

23

materials. NaCl and NaOH quality were reagent-grade (Sigma-Aldrich Castle Hill, NSW,

5

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1

Australia). Reagent-grade concentrated HCl (32 wt%), H2SO4 (98 wt%), phenolphthalein,

2

acetic acid and formic acid were obtained from Merck (Kilsyth, VIC Australia).

3

Page 6 of 28

Synthetic molasses solution was prepared by dissolving glucose, fructose, and sucrose

4

in a ratio of 11:12:24by weight in distilled water to give a 67 g/L sugar/carbohydrate solution,

5

typical of industrial molasses.

6

Catalyst preparation and characterisation

7

Bagasse/molasses (5 g) was pyrolysed by heating in a co-axial furnace under N2 at

8

420 °C for 8 h.15 The product solid was ground and treated with concentrated H2SO4 under

9

N2 at 150 °C for 15 h.15 The resulting mixture was then cooled, filtered, and washed many

10 11

times with hot water (2 L), then dried under reduced pressure for 48 h at 70 °C. The total acid functional groups (i.e., –SO3H, –COOH and –OH) was determined by

12

back titrating NaOH with HCl.15 A solution of 20 mL NaOH (0.01 M) was agitated and

13

mixed with 0.05 g catalyst for 1 h. The solution from the mixture was obtained by

14

centrifugation and filtration, and titrated with HCl (0.01 M). The –SO3H groups were

15

determined by titrating a solution obtained by treating the catalyst (0.05 g) with 20 mL of

16

0.01 M NaCl solution for 1 h with NaOH using phenolphthalein as an indicator.

17

The results indicated molasses-based sulfonated carbon catalyst (M-SO3H) contains

18

3.98 mmol/g total acid sites (i.e., –SO3H, –COOH and –OH) and 2.01 mmol/g strong acid

19

sites (–SO3H). These values are similar to results for beet molasses-based catalysts.15 The

20

bagasse-based sulfonated carbon catalyst (B-SO3H) contained 3.61 mmol/g total acid sites

21

and 1.89 mmol/g strong acid sites similar to what is published in the literature.16

22

The compounds that fouled and hence deactivated the catalysts were analysed by

23

Fourier transform infrared (FTIR) spectroscopy The Infra-red spectra were collected using a

24

Nicote 870 Nexus FTIR system, consisting of a continuum IR microscope equipped with a

6

ACS Paragon Plus Environment

Page 7 of 28 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

1

liquid nitrogen-cooled MCT detector and an attenuated total reflectance, ATR; Nicolet

2

Instrument Corp. Madison, WI).

3

Molasses treatment

4

The processing method applied to molasses was similar to that published by Liu et al.19

5

In a typical experiment, the molasses was diluted with water to 30% (w/w) total sugar content

6

and then adjusted to pH 3.5 with HCl, H2SO4 or formic acid. It was then heated to 60 °C for 2

7

h. This treatment did not result a noticeable change in the saccharide contents. At the end of

8

the treatment, the solution was cooled centrifuged and filtered, and the resulting solution was

9

diluted to 67 g/L (unless otherwise specified) total sugars and stored at -4 °C. The solids

10

recovered after centrifugation and filtration was washed with distilled water and dried for 12

11

h, prior to X-ray powder diffraction analysis. The sugar content of solution was analysed by

12

high-performance liquid chromatography (HPLC).

13

14

Hydrolysis with microwave

For the microwave (Milestone START SYNTH microwave; Milestone, Germany)

15

hydrolysis trials, 300 mg of catalyst was added to 25 mL of a 67 g/L carbohydrate solution in

16

a Teflon reactor (NOVA-8 vessels of 75 mL capacity). The microwave was heated with 300

17

W or 500 W power to the required temperature (heating rate of ~50 °C/min) and maintained

18

at the temperature for a specified time.20 The reaction pressure was estimated to be 480 kPa

19

for a temperature of 150 °C. At completion of the reaction, the solution was cooled, then

20

centrifuged to remove residual solids, and diluted with distilled water. The hydrolysis trials

21

were done in triplicate.

7

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1

Page 8 of 28

Equation 1 was used to calculate the HMF yield, where HMF (mol) is the HMF

2

quantitated after microwave hydrolysis, while the amounts glucose, fructose and sucrose are

3

that available for hydrolysis before hydrolysis.

4

   % = [ 

 % ×  !"  #×$! ]

Equ 1

5

HMF and sugar analysis

6

A Waters HPLC system (Milford, MA, USA) with a Bio-Rad Aminex HPX-87H

7

column was used to detect and quantify HMF. The column temperature was set at 65 °C and

8

5 mM H2SO4 at a flow rate of 0.6 mL/min was used as eluent. A Phenominex RPM

9

monosaccharide column (set at 85 °C) was used to determine the concentration of sugars and

10

the eluent was water set at a flow rate of 0.5 mL/min.

11

X-ray powder diffraction analysis

12

X-ray power diffraction (XRD) of the solid residue obtained after molasses

13

pretreatment with acid was carried out on a PANalytical X’Pert MPD X-ray diffractometer,

14

using a diffraction camera (Rigaku) with an X-ray generator with Cu Kα radiation of

15

wavelength 1.5418 Å.

16

RESULTS AND DISCUSSION

17

18

19

Synthetic molasses Effect of temperature Several preliminary hydrolysis trials were carried out on synthetic molasses from 110-

20

150 °C for 30 min reaction time using a microwave power of 300 W in order to determine the

21

preferred temperature for HMF formation. In contrast to the literature, little or no HMF was

8

ACS Paragon Plus Environment

Page 9 of 28 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

1

formed at 110 °C.14, 21 At 130 °C sucrose hydrolysis proceeded but no quantitative amount of

2

HMF was obtained (Table 1). In the presence of acid, sucrose is readily hydrolysed to

3

fructose and glucose under relatively thermodynamically neutral conditions (-5 kcal/mol

4

enthalpy change on ion-exchange resin).22 The hydrolysis of monosaccharides to HMF has

5

been consistently reported to exhibit higher enthalpy change than that of sucrose hydrolysis at

6

24 kcal/mol.23 The reaction conditions at 130 °C were found sufficient for the inversion of

7

sucrose, while formation of HMF was less energetically favourable and occurred at > 130 °C.

8

Table 1 - Hydrolysis of synthetic molasses solution

Catalyst

9 10 11 12

B-SO3H

M-SO3H

Temp (°C)

130

150

130

150

Residual glucose (%)

88.2

94.2

88.2

98.0

Residual fructose (%)

85.9

78.4

85.9

73.6

Total unreacted saccharides (%)

87.1

86.4

87.1

86.0

HMF yield (mol%)

< LOQ

7.6

< LOQ

11.2

LOQ = limit of quantitation Notes: 25 mL of 67 g/L sugar solution; 300 mg catalyst; 30 min reaction time; 300 W microwave (MW) power; RSD: HMF < 10%, individual sugars < 4%, total sugars < 8%; yield based on hexose sugar content hydrolysed to HMF

13 14

Reactions undertaken at 130 °C using B-SO3H revealed glucose and fructose were

15

consumed in comparable proportions, with little or no HMF formed. Production of non-HMF

16

products could occur due to saccharides undergoing a “caramelisation” reaction (e.g.,

17

enolisation, anhydride formation and polymerisation).24 At 150 °C, HMF is produced in

18

reasonable yields and fructose seems to be selectively consumed because of its primary

19

furanose conformation and lower activation energy25 compared to glucose. At this

20

temperature, M-SO3H is more effective than B-SO3H for the formation to HMF.

9

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1

Page 10 of 28

The results reported in Table 1 are higher than the 2.5 mol% reported for glucose using

2

sulfonated cellulose in water at 160 °C (conventional heating) for 15 min26 and 2.3 mol%

3

obtained using sulfonated lignin at 100 °C (conventional heating) for 1 h21 but lower than the

4

20-40 mol% yields of HMF obtained for fructose using microwave heating at 150 °C for 1 h

5

with sulfonated lignin and biomass-derived solid catalysts.14 A number of factors could

6

account for the variation and include differences in the physico-chemical properties of the

7

catalyst and dosage, feed carbohydrate composition, reaction time and temperature, and

8

solvent volume. It has been noted that catalytic activity of these biomass derived catalysts is

9

not only depended on acid density but also the nature of the polycyclic aromatic carbon

10

11

12

sheets surrounding the -SO3H group.27 Effect of time An increase in glucose concentration was observed after 1 h reaction with the use of

13

both catalysts (Table 2). The glucose content of the M-SO3OH and B-SO3OH systems

14

decreased after 2 h and 3 h respectively. The existence of increased levels of glucose isomers

15

in solution indicates the isomerisation reaction of fructose to glucose occurs slightly faster

16

than the HMF-producing hydrolysis reaction; which negatively impacts on HMF yield. A

17

maximum yield at 3 h was achieved with M-SO3H, the more acidic catalyst, whereas the

18

bagasse-based catalyst (B-SO3H) reached maximum yield at 4 h. A similar drop in yield over

19

long reaction times has been previously reported, both before13 and after28 conversion of

20

available fructose. Reduced specificity influences the decrease in yield, possibly due to a

21

number of subsequent HMF reactions such as hydrolysis to organic acids,13 degradation to

22

humins through aldol addition and condensation reactions,29 or other degradation pathways.

23 24

In all the hydrolysis reactions, a maximum HMF production rate was exhibited in the initial time period (30 min). Under longer reaction times humin production is a known cause

10

ACS Paragon Plus Environment

Page 11 of 28 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

1

of reduced activity that would lead to lower reaction rates.29 Additionally, irreversible

2

adsorption of furanics onto carbon30 or acidic sites can deactivate the catalyst sites31 further

3

reducing reaction rates. As HMF converts to organic acids, the change in concentration and

4

pH will also affect specificity and yield of the target products.32 Typical HMF hydrolysis

5

products of levulinic33 and formic acid32 can act as catalyst and further increase HMF

6

production. Hydrolysis of the carbohydrates (synthetic molasses) was also carried out at

7

150 °C over 4 h without catalyst as the hydrolysis of saccharides to HMF is also known to be

8

autocatalytic.13 For these conditions with no catalyst, HMF yield was 18.4 mol% with a

9

specificity of 26% over this period of 4 h. No residual sucrose, glucose and fructose remained

10

at this time.

11

Table 2 - Hydrolysis of synthetic molasses to HMF at 150 °C and different times

12 13

Catalyst

Reaction time (h)

Residual glucose (%)

Residual fructose (%)

Total unreacted saccharides (%)

HMF yield (mol%)

B-SO3H

0.5

94.2

78.4

86.4

7.6

B-SO3H

1

102.0

68.0

85.2

14.8

B-SO3H

2

105.0

46.2

75.9

26.9

B-SO3H

3

105.0

34.4

71.5

36.9

B-SO3H

4

101.0

16.7

59.2

39.1

M-SO3H

0.5

98.0

73.6

86.0

11.2

M-SO3H

1

103

85.8

81.8

22.0

M-SO3H

2

109

32.0

70.6

33.9

M-SO3H

3

93.4

25.1

59.6

34.2

M-SO3H

4

93.7

8.0

51.3

30.9

None

4

n.d.

n.d

n.d

18.4

Notes: 25 mL of 67 g/L sugar solution; 300 mg catalyst; 300 W MW power, 300 W; 150 °C; RSD: HMF < 10%, individual sugars < 4%, total sugars < 8%; yield based on hexose sugar content hydrolysed to HMF

14

11

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1

Page 12 of 28

The results obtained in this study are in agreement with those of Guo et al.14 for the

2

conversion of fructose to HMF using a lignin-based catalyst (fructose 4 g, catalyst 1 g in 20

3

mL of water, microwave heating, 150 °C, 1 h), where 39% HMF was produced. However,

4

Guo et al.14 achieved significantly higher yield with the catalyst in ionic liquid/DMSO

5

combination. It should also be pointed out in the present study a mixture of sucrose, glucose

6

and fructose was used which is less efficiently converted to HMF. This was demonstrated by

7

Guo et al.14 who reported a drop in HMF yield in ionic liquid/DMSO solvent from 84 mol%

8

(110 °C for 10 min) for fructose to 68 mol% for glucose under more severe conditions

9

(160 °C for 50 min).

10

Hydrolysis of molasses

11

The hydrolysis of industrial molasses was also studied by conducting trials for 30 min

12

at 110, 130 and 150 °C with a microwave power of 300 W similar to the synthetic molasses

13

study. The amounts of HMF produced were not quantifiable, in contrast to the synthetic

14

molasses solution. The different components of biomass (including inorganics) have been

15

found to affect microwave energy absorption,28 and may help explain the inability to promote

16

hydrolysis of molasses at 300 W. Increased microwave power is commonly employed to

17

promote reaction of more robust or recalcitrant samples, such as the hydrolysis of

18

lignocellulosic biomass and cellulose.28 The rationale cited is that microwave irradiation

19

promotes organic reactions through rapid and efficient heat generation, enhanced substrate

20

interactions34 and increasing particle collisions.20 This has the effect of altering chemical

21

reaction pathways and accelerating reaction rates,28 including the target HMF-producing

22

reaction.14 The production of non-HMF products under non-microwave conditions is possibly

23

encouraged by the lower heating, allowing saccharides to undergo “caramelisation” (e.g.,

24

anhydride formation and polymerisation).24 The HMF yields from 0.5 h to 4 h using a higher

12

ACS Paragon Plus Environment

Page 13 of 28 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

1

microwave power of 500 W are given in Table 3. The amount of sucrose remaining was

2

found to be 15.1 wt% and 2.9 wt% for the process catalysed with B-SO3H and M-SO3H

3

respectively at 30 mins. The solutions came to ~130 °C within 3 mins at 300 W and 150 °C

4

within 3 mins at 500 W. No sucrose was detected with synthetic molasses at 0.5 h with lower

5

microwave power (Table 2). This suggests an overall slowing of the hydrolysis process, more

6

notable with the less acidic B-SO3H catalyst. The slowing of the hydrolysis process could be

7

related to the physical blocking of the acid sites of the catalysts by both organic and inorganic

8

impurities in the molasses as well as the strong association between sucrose and inorganic

9

components (e.g., calcium) to form saccharide complexes. It is likely that the buffering

10

effect35 of molasses additionally slowed the hydrolysis process.

11

The more acidic M-SO3H showed similar specificity and slightly greater HMF

12

conversion rate than B-SO3H. In contrast to synthetic molasses, the fastest rate of molasses

13

conversion to HMF did not occur at 0.5 h but occurred around 2 h. The catalyst, M-SO3H at 4

14

h reaction time gave a similar result as that of synthetic molasses without a catalyst (Table 2),

15

while the catalyst B-SO3H gave a slightly lower value for the same heating time. These

16

results further confirm that the non-sugar components present in industrial molasses play an

17

important role in carbohydrate hydrolysis.

13

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1

2 3

Page 14 of 28

Table 3 - Hydrolysis of industrial molasses to HMF at 150 °C at various times

Catalyst

Reaction time (h)

Residual sucrose (%)

Residual glucose (%)

Residual fructose (%)

Total unreacted saccharides (%)

HMF yield (mol%)

B-SO3H

0.5

15.1

100

89.4

94.7

1.77

B-SO3H

1

0

87.1

64.2

75.7

4.79

B-SO3H

2

0

80.5

41.0

60.9

10.9

B-SO3H

3

0

74.3

28.5

51.4

16.3

B-SO3H

4

0

69.6

20.3

45.1

17.3

M-SO3H

0.5

2.94

94.0

80.5

87.3

2.69

M-SO3H

1

0

87.3

62.7

75.0

6.22

M-SO3H

2

0

80.7

37.7

62.7

12.9

M-SO3H

3

0

73.2

26.7

50.0

17.4

M-SO3H

4

0

62.6

14.8

38.9

18.7

Notes: 25 mL of 67 g/L sugars from molasses; 300 mg catalyst; 500 W MW power; 150 °C; RSD: HMF < 10%, individual sugars < 4%, total sugars < 8%; yield based on hexose sugar content hydrolysed to HMF

4 5

HMF production from industrial molasses exhibited markedly lower yields and

6

specificities (compared to the synthetic molasses comprising neat carbohydrates) which may

7

be related to catalyst deactivation and production of higher amounts of degradation products.

8

The industrial molasses reaction matrix contains additional components including lipids,

9

proteins, oligosaccharides and polysaccharides, amino acids, organic acids and phenolics36

10

that can take part in or enhance humins formation and also foul and deactivate the catalyst.

11

This may explain the reduced HMF yields in the hydrolysis of industrial molasses solution.

12

FTIR spectra were obtained for the fresh catalysts and the catalysts after hydrolysis of

13

the molasses solutions (Figure 1) in order to determine differences in the functional group

14

contents on the surface of the catalyst. The spectra were normalised to the aromatic ring

15

stretching vibration peak (1600 cm-1), representative of the carbon support of the catalyst.

16

The spectra show a broad band at 3400 cm-1 assigned to O-H stretching, sharp peaks at 1715 14

ACS Paragon Plus Environment

Page 15 of 28 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

1

cm-1 ascribed to C=O stretch in carboxylic acid groups and peaks in the 1200-1000 cm-1

2

range that are both typical of C-O stretching and deformation in phenolic and aromatic

3

groups.15-16 The fingerprint region (1200-1000 cm-1) is difficult to characterise fully as S=O

4

symmetric and asymmetric stretching vibration peaks (1020-1030 cm-1 and 1140-1150 cm-1

5

respectively) that are attributed to the –SO3H groups incorporated onto the catalyst surface

6

would also be present in this region.15-16, 27

7

In comparison with fresh catalyst, the spent catalyst exhibited new small peaks at 1510

8

cm-1, 1355 cm-1 and 960 cm-1 attributed to C-O stretching in furan rings29 which are due to

9

the deposition of HMF degradation products onto the catalyst surface (Figure 1). Additional

10

peaks at 2920 cm-1 and 2840 cm-1 were also detected with the spent catalyst derived from the

11

hydrolysis of industrial molasses. These peaks were absent in the spent catalyst derived from

12

the hydrolysis of the neat carbohydrate solutions. These peaks are attributed to CH stretching

13

modes in aliphatic compounds of the attached side chains of protein compounds.37

14

15

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1

2

Page 16 of 28

Figure 1 - Normalised FTIR spectra of fresh and used catalysts Figure 1 also shows broadening of the regions at 1600-1550 cm-1 and 1200-1160 cm-1

3

for the spent catalysts. These are attributed to C=C vibrations of deposited condensed organic

4

material. The possible detection of nitrogen (1660 cm-1 for amine deformation and 1200 cm-1

5

for C-C-N bending)37 supports this hypothesis. A shift in peaks of the spent catalysts to

6

lower frequency (e.g., 1715 cm-1, 1020 cm-1) also indicate a more condensed structure is

7

formed and/or increased intermolecular bonding of the species.

8 9

Differential FTIR spectra comparing the fresh and spent catalysts were examined to provide a more detailed analysis of the solids deposited on the catalyst surfaces (Figure S1,

10

Supporting Information). The difference spectra show that the solid residue comprises humic

11

substances (with furanic ring structures at 1510 cm-1, 1355 cm-1 and 960 cm-1) and protein

12

compounds (amine deformation at 1650 cm-1). The difference spectra also show a reduction

13

in intensity of 1200-1000 cm-1 region, which may be caused by the deposition of organic

14

material onto the carboxylic and sulfonated acid sites of the catalyst surface reducing the

15

peak intensity.

16

The amino acids content in sugarcane molasses (e.g., glycine)36 can take part in

17

Maillard-like reactions with HMF and lead to the formation of melanoidin polymers.38

18

Nitrogen containing melanoidin polymers are similar to humic substances,39 and would

19

contain smaller amounts of aromatic moieties compared with humic polymers produced from

20

furans.38 This would produce solids with less-aromatic nature after molasses hydrolysis

21

(Figure S1, region at 1510 cm-1).

22

Hydrolysis of molasses - Effect of acid pretreatment

23

Often pretreatment of recalcitrant feedstocks is necessary to enhance r hydrolysis reactions. Here,

24

liquid acid pretreatment was utilised as a relatively simple method to precipitate both inorganic 16

ACS Paragon Plus Environment

Page 17 of 28 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

1

and organic impurities in molasses, while allowing tuning of pH, a crucial factor in minimising

2

undesirable reactions and also acting as a homogeneous catalyst. Three acids were examined for

3

the purification of molasses and increased catalytic activity for the subsequent hydrolysis

4

reaction (Table 4).

5

Table 4 - Hydrolysis of acid pretreated industrial molasses

6 7 8

Residual sucrose (%)

Residual glucose (%)

Residual fructose (%)

Total unreacted saccharides (%)

HMF yield (mol%)

Catalyst

Pretreatment Acid

None

H2SO4

0

85.9

22.8

54.0

23.5

B-SO3H

H2SO4

0

88.9

21.8

55.1

26.6

M-SO3H

H2SO4

0

91.6

18.5

54.7

29.2

None

HCl

0

49.1

52.9

51.0

30.5

B-SO3H

HCl

0

88.7

20.2

54.4

39.8

M-SO3H

HCl

0

78.2

18.2

48.2

35.6

None

HCOOH

0

78.5

20.4

49.4

31.4

B-SO3H

HCOOH

0

82.4

17.1

49.6

39.0

M-SO3H

HCOOH

0

71.5

13.0

42.2

34.6

Notes: Molasses solution treated to pH 3.5, 25 mL of 67 g/L sugars; 300 mg catalyst; 500 W MW power; 150 °C; 4 h reaction time; RSD: HMF < 10%, individual sugars < 4%, total sugars < 8%; yield based on hexose sugar content hydrolysed to HMF

9 10

Sulfuric acid with and without solid catalyst gave the lowest yield and specificity than

11

the other acids (Table 4). The improvements of HCl over H2SO4 may be due to the formation

12

of a chlorinated intermediate,40 which could lower the activation energy for HMF

13

formation.41 Formic acid is a carboxylic acid, a class of compound that is known to provide

14

synergy in solid acid hydrolysis by altering solvent polarity and improving surface

15

coverage.42

17

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1

Page 18 of 28

The use of solid catalysts with the acid pretreated molasses increased HMF yield by 24-

2

30% compared to the results obtained without the use of the catalyst. B-SO3H gave a slightly

3

higher HMF yields with HCl and formic acid treatments compared to M-SO3H, but a lower

4

value with H2SO4 treatment. The HMF yield obtained with HCl treated molasses with B-

5

SO3H is over twice that obtained with same catalyst on untreated molasses. A similar result

6

was obtained for formic acid treated molasses with M-SO3H.

7

XRD analysis of the solid residue (Figure S2, Supporting Information) recovered after

8

acid pretreatment indicated that calcium oxalate dihydrate (weddellite) and quartz were the

9

main crystalline compounds present. The signal at 2θ = 22 ° indicate a large proportion of

10

amorphous material which is due to organics such as polysaccharides and protein

11

precipitating during the acid pretreatment. These precipitated inorganic and organic

12

compounds may have blocked acid sites on the solid catalysts and hence, to a certain extent,

13

could influence the conversion of molasses to HMF.

14

15

Hydrolysis of molasses - Effect of formic acid alone The results presented in Table 4 show that the use HCl and formic acid gave similar

16

HMF yields. The multiple role of formic acid in pretreatment, catalyst and solvent was

17

investigated (Table 5). Formic acid has good green credentials,43 and it can be produced

18

with levulinic acid from HMF.44 Formic acid is also easier to separate chromatographically

19

from carbohydrates than HCl.

20

A reaction pH of 2.15 provided the maximum HMF yield and specificity and required a

21

concentration of 15% v/v formic acid to achieve due to the buffering effect of molasses. The

22

solvent effect of formic acid on the molasses feedstock has been reported to best facilitate

23

hydrolysis with-in this range.32 Substantial amounts of liquid catalyst is not preferred due to

24

downstream recovery processing considerations.12 Therefore, higher solid catalyst loadings

18

ACS Paragon Plus Environment

Page 19 of 28 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

1

with lower formic acid concentration were examined (Table S1, Supporting Information). A

2

HMF yield of 41.8% was obtained at pH of 2.36 (molasses pretreated with 4.4% formic acid).

3

This result is similar to that of the molasses solution containing 15% formic acid, further

4

confirming the benefits derived from using the sulfonated carbon catalysts. In order to see

5

whether HMF yield can be maintained at a lower formic acid concentration with increasing

6

solid catalyst load, the pretreated molasses having a reaction pH of 3.41 (produced by

7

treatment with 0.2% formic acid) was hydrolysed in the presence of M-SO3H. Increasing the

8

catalyst loading decreased the product yield (Table S1, Supporting Information). The

9

decrease observed could be due to hydrolysis reagents and products binding onto carbon30 or

10

catalytic sites,31 leading to lower HMF yields.

11

Table 5 - Effect of solution pH and formic acid concentration on HMF yield

12 13 14

Pretreatment

Initial reaction pH

Residual sucrose (%)

Residual glucose (%)

Residual fructose (%)

Total unreacted saccharides (%)

HMF yield (mol%)

pH 3.5 (0.2%)

3.41

0

78.5

20.4

49.4

31.4

pH 3.0 (0.5%)

3.38

0

89.1

3.15

45.6

32.9

pH 2.5 (1.1%)

2.99

0

87.1

6.44

46.5

32.8

pH 1.5 (4.4%)

2.36

0

78.9

10.9

44.5

38.4

pH 1.5

2.36*

0

79.8

1.1

39.7

41.8

15%

2.15

0

77.6

0.53

38.2

42.3

20%

1.93

0

78.3

0

37.9

38.9

25%

1.77

0

81.9

0

39.6

38.1

Notes: 25 mL of 67 g/L sugars from molasses; 500 W MW power; 150 °C; 4 h reaction time; RSD: HMF < 10%, individual sugars < 4%, total sugars < 8%; formic acid reported as volume %; yield based on hexose sugar content hydrolysed to HMF, * with 300 mg M-SO3H

15

19

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1

2 3 4

Page 20 of 28

Hydrolysis of molasses - Effect of increased temperature The hydrolysis process was further examined by increasing the temperature from 150 to 170 °C (Table S2, Supporting Information). The highest yield (40.8 mol%) and specificity (84%) were observed after 1 h which is

5

of similar magnitude (though lower) than the 40-80% yields reported by others with

6

sulfonated biomass-derived solid acid catalysts under microwave irradiation.14, 21, 26 It should

7

be noted that the higher HMF yields reported in literature were from fructose and glucose in

8

IL or solvent-assisted systems. The reduction in yield and specificity over time is because of

9

the formation of degradation products which increases in content with harsher conditions. As

10

the highest yield of HMF from molasses was ~41% it was logical to examine whether

11

lowering the molasses buffering capacity through dilution would increase HMF formation.

12

Using a diluted pretreated molasses HMF yield significantly increased yields from 36.2%

13

(Table S2, Supporting Information) to 64.5% for 3 h (Table 6). Reactions with further

14

increase in reaction time were not conducted due to the reduction in selectivity and yield

15

obtained with pretreated molasses for 4 h at 170 °C (Table S2, Supporting Information).

16

Other researchers found that using 1 M phosphate buffer medium, the HMF yield from

17

fructose heated at 190 °C was 4% but increased to 28.5% in 0.1 M of the same buffer.13 It

18

was suggested that the increase in buffer concentration increased the neutralization of the

19

acid formed insitu, and hence resulted in preferential formation of humins.13 The dilution of

20

molasses to lower carbohydrate content in this work would invariably have improved surface

21

reactions on the carbon catalysts and improved mass transfer reactions.

20

ACS Paragon Plus Environment

Page 21 of 28 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

1

2 3

Table 6 - Hydrolysis of diluted molasses solutions with M-SO3H

Reaction time (h)

Residual glucose (%)

Residual fructose (%)

Total unreacted saccharides (%)

HMF yield (%)

0.5

80.9

46.7

64.0

19.0

1

72.7

27.5

50.3

28.8

2

66.4

7.66

37.3

60.3

3

37.5

2.90

20.4

64.5

Notes: 25 mL of 33.5 g/L sugars from molasses; 300 mg catalyst; 500 W MW power; 170 °C; RSD: HMF < 10%, individual sugars < 4%, total sugars < 8%: yield based on hexose sugar content hydrolysed to HMF

4 5

CONCLUSIONS

6

The results have shown that the hydrolysis of sugarcane industrial molasses with

7

sugarcane by-product derived catalysts for HMF formation occur at a far slower rate than that

8

of a solution of neat saccharides (i.e., synthetic molasses) under similar conditions. Molasses

9

not only contain organic acids (e.g., formic acid) but also divalent and trivalent cations and

10

anions (e.g., Cl-) all of which should auto-catalytically convert the sugars to HMF. These

11

compounds were found not to accelerate or enhance HMF formation. It was found necessary

12

to increase the microwave power and remove some molasses impurities using a simple acid

13

pretreatment step in order to improve HMF yields. The use of acid in combination with the

14

carbon catalysts enhanced HMF formation. Significant improvement in HMF yield was

15

obtained by further diluting the industrial molasses with water. This process lowered the

16

buffering capacity of the system.

17

ACKNOWLEDGEMENTS

18 19

Australian Government funding through the Sugar Research and Development Corporation Grant STU074.

21

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1

SUPPORTING INFORMATION

2

FTIR differential spectrum of fresh catalysts subtracted from the spectrum of the

3

corresponding spent catalysts after hydrolysis of the industrial molasses (Figure S1).

4

XRD analysis of the solid residue recovered after acid pretreatment of industrial molasses

5

(Figure S2).

6

Effect of catalyst loading on HMF yield from industrial molasses (Table S1).

7

Hydrolysis of pretreated molasses at 170 °C by M-SO3H (Table S2).

8

REFERENCES

9

1.

Agency, I. E. Key World Energy Statistics 2014. OECD Publishing: Paris, 2014.

10

2.

Alfke, G.; Irion, W. W.; Neuwirth, O. S. Oil Refining. In Ullmann's Encyclopedia of Industrial

11 12

Chemistry, Wiley-VCH Verlag GmbH & Co. KGaA: 2000. 3.

Peters, G. P.; Marland, G.; Le Quere, C.; Boden, T.; Canadell, J. G.; Raupach, M. R. Rapid growth in

13

CO2 emissions after the 2008-2009 global financial crisis. Nature Clim. Change 2012, 2, DOI

14

10.1038/nclimate1332.

15

4.

16 17

Corma, A.; Iborra, S.; Velty, A. Chemical routes for the transformation of biomass into chemicals. Chem. Rev. 2007, 107, DOI 10.1021/cr050989d.

5.

18 19

Saha, B.; Abu-Omar, M. M. Advances in 5-hydroxymethylfurfural production from biomass in biphasic solvents. Green Chem. 2014, 16, DOI 10.1039/c3gc41324a.

6.

Cai, C. M.; Zhang, T. Y.; Kumar, R.; Wyman, C. E. Integrated furfural production as a renewable fuel

20

and chemical platform from lignocellulosic biomass. J. Chem. Technol. Biotechnol. 2014, 89, DOI

21

10.1002/jctb.4168.

22

7.

23 24

Page 22 of 28

Mascal, M.; Nikitin, E. B. Direct, high-yield conversion of cellulose into biofuel. Angew. Chem. Int. Ed. 2008, 47, DOI 10.1002/jctb.4168.

8.

Kumari, N.; Olesen, J. K.; Pedersen, C. M.; Bols, M. Synthesis of 5-bromomethylfurfural from

25

cellulose as a potential intermediate for biofuel. Eur. J. Org. Chem. 2011, 2011, DOI

26

10.1002/ejoc.201001539.

22

ACS Paragon Plus Environment

Page 23 of 28 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

1

9.

Yang, Y.; Abu-Omar, M. M.; Hu, C. Heteropolyacid catalyzed conversion of fructose, sucrose, and

2

inulin to 5-ethoxymethylfurfural, a liquid biofuel candidate. Appl. Energy 2012, 99, DOI

3

10.1016/j.apenergy.2012.04.049.

4

10.

Holladay, J. E.; White, J. F.; Bozell, J. J.; Johnson, D. Top Value-Added Chemicals from Biomass-

5

Volume II—Results of Screening for Potential Candidates from Biorefinery Lignin; Pacific Northwest

6

National Laboratory (PNNL), Richland, WA (US): 2007.

7

11.

Mukherjee, A.; Dumont, M.-J.; Raghavan, V. Review: Sustainable production of

8

hydroxymethylfurfural and levulinic acid: Challenges and opportunities. Biomass Bioenergy 2015, 72,

9

DOI 10.1016/j.biombioe.2014.11.007.

10

12.

11 12

solid acid from biomass waste. Scientific reports 2013, 3, DOI 10.1038/srep02419. 13.

13 14

Liu, W.-J.; Tian, K.; Jiang, H.; Yu, H.-Q. Facile synthesis of highly efficient and recyclable magnetic

Ranoux, A.; Djanashvili, K.; Arends, I. W. C. E.; Hanefeld, U. 5-Hydroxymethylfurfural synthesis from hexoses is autocatalytic. ACS Catal. 2013, 3, DOI 10.1021/cs400099a.

14.

Guo, F.; Fang, Z.; Zhou, T. J. Conversion of fructose and glucose into 5-hydroxymethylfurfural with

15

lignin-derived carbonaceous catalyst under microwave irradiation in dimethyl sulfoxide-ionic liquid

16

mixtures. Bioresour. Technol. 2012, 112, DOI 10.1016/j.biortech.2012.02.108.

17

15.

Samorì, C.; Torri, C.; Fabbri, D.; Falini, G.; Faraloni, C.; Galletti, P.; Spera, S.; Tagliavini, E.; Torzillo,

18

G. Unusual catalysts from molasses: Synthesis, properties and application in obtaining biofuels from

19

algae. ChemSusChem 2012, 5, DOI 10.1002/cssc.201100822.

20

16.

Lou, W.-Y.; Guo, Q.; Chen, W.-J.; Zong, M.-H.; Wu, H.; Smith, T. J. A highly active bagasse-derived

21

solid acid catalyst with properties suitable for production of biodiesel. ChemSusChem 2012, 5, DOI

22

10.1002/cssc.201100811.

23

17.

24 25

Elsevier Science Publishers BV: 1989. 18.

26 27

Paturau, J. M. By-products of the cane sugar industry. An introduction to their industrial utilization.

Bortolussi, G.; O’Neill, C. J. Variation in molasses composition from eastern Australian sugar mills. Australian Journal of Experimental Agriculture 2006, 46, DOI 10.1071/ea04124.

19.

Liu, Y.-P.; Zheng, P.; Sun, Z.-H.; Ni, Y.; Dong, J.-J.; Zhu, L.-L. Economical succinic acid production

28

from cane molasses by Actinobacillus succinogenes. Bioresour. Technol. 2008, 99, DOI

29

10.1016/j.biortech.2007.03.044.

23

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1

20.

2 3

Page 24 of 28

Wu, Y.; Fu, Z.; Yin, D.; Xu, Q.; Liu, F.; Lu, C.; Mao, L. Microwave-assisted hydrolysis of crystalline cellulose catalyzed by biomass char sulfonic acids. Green Chem. 2010, 12, DOI 10.1039/b917807d.

21.

Hu, L.; Tang, X.; Wu, Z.; Lin, L.; Xu, J.; Xu, N.; Dai, B. Magnetic lignin-derived carbonaceous

4

catalyst for the dehydration of fructose into 5-hydroxymethylfurfural in dimethylsulfoxide. Chem. Eng.

5

J. 2015, 263, DOI 10.1016/j.cej.2014.11.044.

6

22.

Chheda, J. N.; Huber, G. W.; Dumesic, J. A. Liquid‐phase catalytic processing of biomass‐derived

7

oxygenated hydrocarbons to fuels and chemicals. Angew. Chem. Int. Ed. 2007, 46, DOI

8

10.1002/anie.200604274.

9

23.

10

Antal, M. J.; Mok, W. S. Mechanism of formation of 5-(hydroxymethyl)-2-furaldehyde from Dfructose and sucrose. Carbohydr. Res. 1990, 199, DOI 10.1016/0008-6215(90)84096-d.

11

24.

Cui, S. W. Food carbohydrates: chemistry, physical properties, and applications. CRC Press: 2005.

12

25.

Binder, J. B.; Cefali, A. V.; Blank, J. J.; Raines, R. T. Mechanistic insights on the conversion of sugars

13 14

into 5-hydroxymethylfurfural. Energy Environ. Sci. 2010, 3, DOI 10.1039/b923961h. 26.

Hu, L.; Zhao, G.; Tang, X.; Wu, Z.; Xu, J.; Lin, L.; Liu, S. Catalytic conversion of carbohydrates into

15

5-hydroxymethylfurfural over cellulose-derived carbonaceous catalyst in ionic liquid. Bioresour.

16

Technol. 2013, 148, DOI 10.1016/j.biortech.2013.09.016.

17

27.

Fukuhara, K.; Nakajima, K.; Kitano, M.; Kato, H.; Hayashi, S.; Hara, M. Structure and catalysis of

18

cellulose-derived amorphous carbon bearing SO3H groups. ChemSusChem 2011, 4, DOI

19

10.1002/cssc.201000431.

20

28.

21 22

Guo, F.; Fang, Z.; Xu, C. C.; Smith Jr, R. L. Solid acid mediated hydrolysis of biomass for producing biofuels. Prog. Energy Combust. Sci. 2012, 38, DOI 10.1016/j.pecs.2012.04.001.

29.

Patil, S. K. R.; Lund, C. R. F. Formation and growth of humins via aldol addition and condensation

23

during acid-catalyzed conversion of 5-hydroxymethylfurfural. Energy Fuels 2011, 25, DOI

24

10.1021/ef2010157.

25

30.

26 27

Vinke, P.; van Bekkum, H. The dehydration of fructose towards 5-hydroxymethylfurfural using activated carbon as adsorbent. Starch 1992, 44, DOI 10.1002/star.19920440303.

31.

Weingarten, R.; Tompsett, G. A.; Conner Jr, W. C.; Huber, G. W. Design of solid acid catalysts for

28

aqueous-phase dehydration of carbohydrates: The role of Lewis and Brønsted acid sites. J. Catal. 2011,

29

279, DOI 10.1016/j.jcat.2011.01.013.

24

ACS Paragon Plus Environment

Page 25 of 28 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

1

32.

de Souza, R. L.; Yu, H.; Rataboul, F.; Essayem, N. 5-Hydroxymethylfurfural (5-HMF) production

2

from hexoses: Limits of heterogeneous catalysis in hydrothermal conditions and potential of

3

concentrated aqueous organic acids as reactive solvent system. Challenges 2012, 3, DOI

4

10.3390/challe3020212.

5

33.

Seemala, B.; Haritos, V.; Tanksale, A. Levulinic acid as a catalyst for the production of 5-

6

hydroxymethylfurfural and furfural from lignocellulose biomass. ChemCatChem 2016, 8, DOI

7

10.1002/cctc.201501105.

8

34.

9 10

by microwave pretreatment. Bioresour. Technol. 2009, 100, DOI 10.1016/j.biortech.2008.08.045. 35.

11 12

Olbrich, H. The Molasses Book. Fermentation Technologist, Institute für Zuckerindustrie, Berlin (Germany) 1963.

36.

13 14

Ma, H.; Liu, W.-W.; Chen, X.; Wu, Y.-J.; Yu, Z.-L. Enhanced enzymatic saccharification of rice straw

Mee, J. M. L.; Brooks, C. C.; Stanley, R. W. Amino acid and fatty acid composition of cane molasses. J. Sci. FoodAgric. 1979, 30, DOI 10.1002/jsfa.2740300413.

37.

Rubinsztain, Y.; Yariv, S.; Ioselis, P.; Aizenshtat, Z.; Ikan, R. Characterization of melanoidins by IR

15

spectroscopy—II. Melanoidins of galactose with arginine, isoleucine, lysine and valine. Organic

16

Geochem. 1986, 9, DOI 10.1016/0146-6380(86)90118-x.

17

38.

Yaylayan, V. A.; Kaminsky, E. Isolation and structural analysis of maillard polymers: Caramel and

18

melanoidin formation in glycine/glucose model system. Food Chem. 1998, 63, DOI 10.1016/S0308-

19

8146(97)00237-9.

20

39.

Ćosović, B.; Vojvodić, V.; Bošković, N.; Plavšić, M.; Lee, C. Characterization of natural and synthetic

21

humic substances (melanoidins) by chemical composition and adsorption measurements. Organic

22

Geochem. 2010, 41, DOI 10.1016/j.orggeochem.2009.10.002.

23

40.

Mascal, M.; Nikitin, E. B. High-yield conversion of plant biomass into the key value-added feedstocks

24

5-(hydroxymethyl)furfural, levulinic acid, and levulinic esters via 5-(chloromethyl)furfural. Green

25

Chem. 2010, 12, DOI 10.1039/b918922j.

26

41.

Liu, G.; Wu, J.; Zhang, I. Y.; Chen, Z.-N.; Li, Y.-W.; Xu, X. Theoretical studies on thermochemistry

27

for conversion of 5-chloromethylfurfural into valuable chemicals. J. Phys. Chem. A 2011, 115, DOI

28

10.1021/jp207641g.

25

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

1

42.

Doiseau, A.-C.; Rataboul, F.; Burel, L.; Essayem, N. Synergy effect between solid acid catalysts and

2

concentrated carboxylic acids solutions for efficient furfural production from xylose. Catal. Today

3

2014, 226, DOI 10.1016/j.cattod.2013.10.034.

4

43.

5 6 7

Page 26 of 28

Xu, W.; Miller, S. J.; Agrawal, P. K.; Jones, C. W. Depolymerization and hydrodeoxygenation of switchgrass lignin with formic acid. ChemSusChem 2012, 5, DOI 10.1002/cssc.201100695.

44.

Rackemann, D. W.; Doherty, W. O. S. The conversion of lignocellulosics to levulinic acid. Biofuel Bioprod. Bioref. 2011, 5, DOI 10.1002/bbb.267.

8

26

ACS Paragon Plus Environment

Page 27 of 28 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Sustainable Chemistry & Engineering

1

For Table of Contents Use Only

Biomass/ Molasses

Sulfonation/ pyrolysation

Solid Catalysts

Hydrolysis

C-6 Sugars

Furanics (HMF)

2

3 4

SYNOPSIS: The conversion of molasses, a sugar industry byproduct, to HMF was studied using sulfonated solid catalysts derived from biomass.

27

ACS Paragon Plus Environment

ACS Sustainable Chemistry & Engineering 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

85x47mm (150 x 150 DPI)

ACS Paragon Plus Environment

Page 28 of 28