July 1953
INDUSTRIAL AND ENGINEERING CHEMISTRY
Figure 14. Molecular Structure Combined with Plastic Effect
1515
Figure 15. Molecular Structure i n Virtual Absence of Other Features
( 5 ) Fuller, R. R., Paper Trade J., 112, No. 4, 41 (1941). (6) Hermans, P. H., Tertile Research J . , 16, 545 (1948). (7) McLean, D. A., IND.ENG.CHEM., 39, 1457 (1947). (8) McLean, D. A., Proc. Inst. R a d i o Engrs., 38, 1010 (1950). (9) LMcLean, D. A,, Egerton, L., Kohman, G. T., and Brotherton, M., IND.ENG.CHEM.,34, 101 (1942). (10) McLean, D. A , , and Wooten, L. A., Ihid., 31, 1138 (1939). (11) Miller, H . F., and Hopkins, R. J., Gen. Elec. Rev., 50, No. 12, 20 (December 1937). (12) Ritter, G. J., P a p e r Trade J., Tech. Assoc. Sect., 101, 92 (1935). (13) Ritter, G. J., T a p p i , 32, 11 (1949). (14) Sauer, H. A., Bell. Labs. Record, 25, 17 (1947). (15) Sauer, H. A,, and McLean, D. A,, Proc. Inst. R a d i o Engrs., 37, 927 (1947). (16) Siegel, B. N., T a p p i , 32, 109 (1949). (17) Wooley, M. C . , Kohman, G. T., and McMahon, W., Elec. Eng., 71, 715 (1952).
RECEIVED for review December 31,
ACCEPTED April 18, 1953.
1952.
Corrections c
In the article on “Diffusion in a Fluid Moving a t Uniform Velocity in a Tube” [A. Klinkenberg, H. J. Krajenbrink, and H. A. Lauwerier, IND.ENG.CHEM.,45, 1202 (1953)], the subcaption of Figure 1 should be:
Figure 16. Plastic Effect
features described in this paper have been found in all, and roughly to the same extent. This does not necessarily mean that no correlation exists, but that, if i t does, its detection would require a much more extensive and quantitative study than was involved in the present work. LITERATURE CITED
(1) (2) (3) (4)
Anderson, D. B., and Kerr, T., IND.ENG.CHEM.,30, 48 (1938). Barnes, R. B., and Burton, C. J., Ibid., 35, 120 (1943). Church, H. F., J. SOC.Chem. I n d . ( L o n d o n ) , 66,221 (1947). Finch, J. M . , IND. ENG.CHEM.,32, 1021 (1940).
---
p
=
m,
p = 2,
F as function of r as function of
and
I and
p
p
The r values belonging to each of the two sets of curves in Figure 1 are, from left to right, 3, 2, 1.2, 1.0, 0.8, 0.6, and 0.2. ....b
I n the article, ‘LNickel-Catalyzed Hydrogenation of Commercial Aldol,” by C. Kinney Hancock and Douglas D. Henson [IND. ENG. CHEM.,45, 629-32 (1953)l the heading of the fourth column of Table I should be 100
1,3-butanediol X 100
-