Addition/Correction www.acsami.org
Cite This: ACS Appl. Mater. Interfaces XXXX, XXX, XXX−XXX
Correction to “Enhanced Microwave Absorption Performance of Coated Carbon Nanotubes by Optimizing the Fe3O4 Nanocoating Structure” Na Li, Gui-Wen Huang, Yuan-Qing Li,* Hong-Mei Xiao, Qing-Ping Feng, Ning Hu, and Shao-Yun Fu* ACS Applied Materials & Interfaces 2017, 9 (3), 2973−2983. DOI: 10.1021/acsami.6b13142 Corrections 1. Th e eq (2) in the manuscript should be Z in = μr /εr tanh[j(2π /c) με fd]. r r The part before fd in the equation has been misstyped, it should be μrεr instead of μr/εr. The conclusions of the work have been calculated through the right equation as we confirmed, and no influences could be caused to the conclusions.
Figure 6. Comparison of the absolute value of specific RLmin and effective bandwidth (RL < −10 dB) with representative Fe3O4-carbonbased (CNT or GO or C) related composites.
2. The Figure 6 in the manuscript should be The reference number in Figure 6 has been updated to be consistent with the Table 2 of the manuscript, and the conclusion has not been affected. The corresponding author has obtained approval from all of the article coauthors prior to submitting the Addition and Correction. We are so sorry about the mistakes we have made, and we apologize for any inconvenience caused.
■
ACKNOWLEDGMENTS We thank Dr. Delong HE (Lab. MSSMat, CentraleSupélec, Université Paris-Saclay) for his valuable suggestion for pointing out the mistake in Equation (2).
© XXXX American Chemical Society
A
DOI: 10.1021/acsami.8b07682 ACS Appl. Mater. Interfaces XXXX, XXX, XXX−XXX
