Correction to “Graphene Oxide Membranes with Strong Stability in

Jun 11, 2018 - The correct versions of Figure 3 and Figure S3 with their captions are ... f, h, j) of GO@AAO membranes with weight percentage of 0 wt ...
0 downloads 0 Views 6MB Size
Addition/Correction Cite This: ACS Appl. Mater. Interfaces XXXX, XXX, XXX−XXX

www.acsami.org

Correction to “Graphene Oxide Membranes with Strong Stability in Aqueous Solutions and Controllable Lamellar Spacing” Yue-Heng Xi, Jia-Qi Hu, Zhuang Liu,* Rui Xie, Xiao-Jie Ju, Wei Wang, and Liang-Yin Chu* ACS Appl. Mater. Interfaces2016824155571556610.1021/acsami.6b00928

I

n the the original article, the SEM images of the crosssectional views of membranes in Figure 3 and in Supporting Information, Figure S3, were mistakenly included. The correct versions of Figure 3 and Figure S3 with their captions are included here. The conclusions of the paper are not affected by the corrections.

© XXXX American Chemical Society

A

DOI: 10.1021/acsami.8b08236 ACS Appl. Mater. Interfaces XXXX, XXX, XXX−XXX

ACS Applied Materials & Interfaces

Addition/Correction

Figure 3. Photographs (a, c, e, g, i) and cross-sectional SEM images (b, d, f, h, j) of GO@AAO membranes with weight percentage of 0 wt % (a, b), 20 wt % (c, d), 50 wt % (e, f), 80 wt % (g, h), and 100 wt % (i, j) prGO. Scale bars are 10 mm in (a, c, e, g, i), 1 μm in (b1, d1, f1, h1, j1), and 400 nm in (b2, d2, f2, h2, j2).

B

DOI: 10.1021/acsami.8b08236 ACS Appl. Mater. Interfaces XXXX, XXX, XXX−XXX

ACS Applied Materials & Interfaces

Addition/Correction

Figure S3. Photographs (a1−f1) and cross-sectional SEM images (a2−f2) with local magnification (a3−f3) of GO membranes with different contents of prGO that prepared with CN-CA (a−c) and Teflon (d−f) membranes as substrates. The scale bars are 10 mm in (a1−f1), 1 μm in (a2−f2), and 400 nm in (a3−f3).

C

DOI: 10.1021/acsami.8b08236 ACS Appl. Mater. Interfaces XXXX, XXX, XXX−XXX