Correction to “Partial Molar Volumes and Partial Molar Isentropic

Aug 12, 2016 - are reported in table. Correct values taken from reference 7 (Harvey, A. H.; Peskin, A. P.; Klein, S. A. NIST/. ASME Steam Properties ...
1 downloads 0 Views 127KB Size
Addition/Correction pubs.acs.org/jced

Correction to “Partial Molar Volumes and Partial Molar Isentropic Compressions of 15-Crown‑5 and 18-Crown‑6 Ethers at Infinite Dilution in Water at Temperatures T = (278 to 343) K and Atmospheric Pressure” Ivan Cibulka* Department of Physical Chemistry, University of Chemistry and Technology, Technická 5, 166 28 Prague, Czech Republic

J. Chem. Eng. Data 2014, 59 (6), 2075−2086. DOI: 10.1021/je500265v age 2076. Erroneous values of speed of sound in water c1/ m·s−1 are reported in table. Correct values taken from reference 7 (Harvey, A. H.; Peskin, A. P.; Klein, S. A. NIST/ ASME Steam Properties, Formulation for General and Scientific Use. NIST Standard Reference Database 10, version 2.11, 1996) are in Table 2 below. Correct values were used for calculations of partial molar volumes and partial molar isentropic compressions.

P

Table 2. Values of Density ρ1 of and Speed of Sound c1 in Water (NIST)7 Used in Calculations of Standard Molar Isentropic Compression and Standard Molar Volume



T/K

ρ1/kg·m−3

c1/m·s−1

278.15 283.15 288.15 293.15 298.15 303.15 308.15 313.15 318.15 323.15 328.15 333.15 338.15 343.15

999.967 999.702 999.103 998.207 997.048 995.649 994.033 992.216 990.213 988.035 985.693 983.196 980.551 977.765

1426.17 1447.27 1465.93 1482.35 1496.70 1509.15 1519.85 1528.90 1536.45 1542.58 1547.39 1550.97 1553.40 1554.75

AUTHOR INFORMATION

Corresponding Author

*E-mail: [email protected].

© XXXX American Chemical Society

A

DOI: 10.1021/acs.jced.6b00590 J. Chem. Eng. Data XXXX, XXX, XXX−XXX