Correction to Conjugated Polyelectrolyte Blends for Electrochromic

Addition/Correction Cite This: Chem. Mater. XXXX, XXX, XXX−XXX

pubs.acs.org/cm

Correction to Conjugated Polyelectrolyte Blends for Electrochromic and Electrochemical Transistor Devices Erica Zeglio, Mikhail Vagin, Chiara Musumeci, Fatima N. Ajjan, Roger Gabrielsson, Xuan T. Trinh, Nguyen T. Son, Ali Maziz, Niclas Solin, and Olle Inganäs* Chem. Mater. 2015, 27 (18), 6385−6393. DOI: 10.1021/acs.chemmater.5b02501

Chem. Mater. Downloaded from pubs.acs.org by 188.68.0.160 on 01/08/19. For personal use only.

I

n the published article, the channel width (W) of the devices was reported incorrectly. Instead of 1125 μm (the distance between the gold contacts connecting the interdigitated fingers), as stated, it should be 1000 μm (the width of each channel where the fingers are interdigitated) multiplied by the number of channels (39 channels). Thus, on page 6386, “All the transistors had the same channel length (L= 20 μm) and width (W = 1125 μm).” Should be corrected by “All the transistors had the same channel length (L= 20 μm) and width (W = 39000 μm; 39 parallel channels having W = 1000 μm).” The change does not affect the original conclusions of the paper.

© 2015 American Chemical Society

A

DOI: 10.1021/acs.chemmater.8b05214 Chem. Mater. XXXX, XXX, XXX−XXX