Addition/Correction Cite This: ACS Appl. Mater. Interfaces XXXX, XXX, XXX−XXX
www.acsami.org
Correction to Organometallic Dimers: Application to Work-Function Reduction of Conducting Oxides Anthony J. Giordano, Federico Pulvirenti, Talha M. Khan, Canek Fuentes-Hernandez, Karttikay Moudgil, Jared H. Delcamp, Bernard Kippelen, Stephen Barlow,* and Seth R. Marder* ACS Appl. Mater. Interfaces 2015, 7 (7), 4320−4326. DOI: 10.1021/am5087648
Downloaded via 84.54.58.166 on February 12, 2019 at 18:17:36 (UTC). See https://pubs.acs.org/sharingguidelines for options on how to legitimately share published articles.
S Supporting Information *
e regret that the y-axes for the left part of Figure 3 and for Figures S9 and S10 were incorrectly labeled with currentdensity values 6 orders of magnitude larger than those measured. The corrected Figure 3 is shown below (the linear presentation of the data in the right-hand portion is unchanged), and the Supporting Information has been corrected. These errors have no direct bearing on the conclusions of the manuscript, which depend on the shape of the current density−voltage characteristics and the contrast between forward- and reverse-bias current density but not on the absolute magnitude of the current− density values.
W
■
ASSOCIATED CONTENT
S Supporting Information *
The Supporting Information is available free of charge on the ACS Publications website at DOI: 10.1021/acsami.9b00368.
Figure 3. Semilogarithmic (left) and (right) linear plots of J−V characteristics for devices with structure DSC-cleaned ITO(with or without modification)/C60(100 nm)/MoOx(10 nm)/Ag(150 nm). The ITO acts as the cathode under forward bias.
A revised version of the original Supporting Information with corrected Figures S9 and S10 (PDF)
© XXXX American Chemical Society
A
DOI: 10.1021/acsami.9b00368 ACS Appl. Mater. Interfaces XXXX, XXX, XXX−XXX
