Correction to Reinforced Wind Turbine Blades - An ... - ACS Publications

Purchase temporary access to this content. ACS Members purchase additional access options · Ask your library to provide you and your colleagues site-w...
4 downloads 0 Views 115KB Size
Addition/Correction pubs.acs.org/est

Correction to Reinforced Wind Turbine Blades - An Environmental Life Cycle Evaluation Laura Merugula,† Vikas Khanna,‡ and Bhavik R. Bakshi*,† †

William G. Lowrie Department of Chemical and Biomolecular Engineering, The Ohio State University, Columbus, Ohio 43210, United States ‡ Department of Civil and Environmental Engineering, University of Pittsburgh, Pittsburgh, Pennsylvania 15261, United States

Environ. Sci. Technol. 2012, 46 (17), 9785−9792; DOI: 10.1021/es301343p lease note the following errors in our article, “Reinforced Wind Turbine Blades - An Environmental Life Cycle Evaluation”. (1) Figures 3 and 4 have been swapped. The captions are correct, only the figures have been switched. (2) In the section ″Solvent Loading,″ the fifth line should have a 7, reading “According to ref 7”.

P



AUTHOR INFORMATION

Corresponding Author

*E-mail: [email protected].

Published: September 26, 2012 © 2012 American Chemical Society

11484

dx.doi.org/10.1021/es3038406 | Environ. Sci. Technol. 2012, 46, 11484−11484