Correction to Ultralow-Density, Transparent, Superamphiphobic

ACS2GO © 2019. ← → → ←. loading. To add this web app to the home screen open the browser option menu and tap on Add to homescreen...
0 downloads 0 Views 2MB Size
This is an open access article published under an ACS AuthorChoice License, which permits copying and redistribution of the article or any adaptations for non-commercial purposes.

Addition/Correction pubs.acs.org/cm

Correction to Ultralow-Density, Transparent, Superamphiphobic Boehmite Nanofiber Aerogels and Their Alumina Derivatives Gen Hayase,* Kazuya Nonomura, George Hasegawa, Kazuyoshi Kanamori,* and Kazuki Nakanishi Chem. Mater. 2015, 27 (1), 3−5. DOI: 10.1021/cm503993n

I

n Figure 3c, the scale bars were wrongly labeled as 40 nm. The correct label is 400 nm, as shown in the corrected figure here.

Figure S1. Visible-light transmittance of the BNF aerogel obtained from 0.21 wt % BNF sol (10 mm thick).

Figure 3. (a) Photograph, (b) XRD patterns, and (c) FE-SEM images of the as-dried BNF and calcined Al2O3 monoliths obtained from the BNF sol at 0.43 wt %.

In Figure S1 in the Supporting Information, the x-axis was wrongly labeled as “Wavenumber/cm−1”. The correct label is “Wavelength/nm”, as shown in the corrected figure here.

© 2014 American Chemical Society

A

DOI: 10.1021/acs.chemmater.7b02431 Chem. Mater. XXXX, XXX, XXX−XXX