ination isan important factor. In the dilute acids, lead is often pre- ferred over the stainless steels. However, the stainless steelsare sometimes used in process ...
Corrosion of Stainless Steels CORROSION.https://pubs.acs.org/doi/pdfplus/10.1021/ie50507a005by MG Fontana - â1952 - âCited by 2 - âRelated articlesCorrosion of stainless steels by sulfuric acid as a function of temperature is discussed. A note
tenitic stainlesssteels such as Type. 304 (I8-8S) cannot Im* hardened by heat treatment and require cold working to develop hardness and strength. This means ...
The failed section of line was re placed about 2 ... an active (anodic) state or in a pas sive (cathodic) ... sive state by lowering the sulfuric acid concentration or ...
Oct 6, 2008 - Corrosion: Stress-Corrosion Cracking Of Austenitic Stainless Steels in Chemical Plant Equipment. William C. Rion, E. I. du Pont de Nemours.
knife-line attack occurs when the colum- bium fails to do its duty. The cure for Type 347 stainless steel consists of heating at 1600° to 2100° F. after welding.
Oct 6, 2008 - Knife-Line Attack of Stainless Steels CORROSION. Mars G. Fontana. Ind. Eng. Chem. , 1952, 44 (8), pp 87Aâ90A. DOI: 10.1021/ie50512a006.
Corrosion resistance of sigma Corrosion. Mars G. Fontana. Ind. Eng. Chem. , 1951, 43 (7), pp 91Aâ92A. DOI: 10.1021/ie50499a005. Publication Date: July 1951.
Ind. Eng. Chem. , 1938, 30 (1), pp 83â85. DOI: 10.1021/ie50337a017. Publication Date: January 1938. ACS Legacy Archive. Note: In lieu of an abstract, this is ...
