Covalent Interaction between Rice Protein Hydrolysates and

Mar 22, 2019 - College of Food Science and Engineering, Nanjing University of Finance and Economics/Key Laboratory of Grains and Oils Quality Control ...
0 downloads 0 Views 548KB Size
Subscriber access provided by EDINBURGH UNIVERSITY LIBRARY | @ http://www.lib.ed.ac.uk

Food and Beverage Chemistry/Biochemistry

Covalent interaction between rice protein hydrolysates and chlorogenic acid: Improving the stability of oil-in-water emulsions Xin Pan, Yong Fang, Lingling Wang, Yi Shi, Fei Pei, Peng Li, Ji Xia, Wenfei Xiong, Xinchun Shen, Qiuhui Hu, and MINHAO XIE J. Agric. Food Chem., Just Accepted Manuscript • DOI: 10.1021/acs.jafc.8b06898 • Publication Date (Web): 22 Mar 2019 Downloaded from http://pubs.acs.org on March 24, 2019

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 32

Journal of Agricultural and Food Chemistry

1

Covalent interaction between rice protein hydrolysates and

2

chlorogenic acid: Improving the stability of oil-in-water

3

emulsions

4 5

Xin Pan, Yong Fang*, Lingling Wang, Yi Shi, Minhao Xie, Ji Xia, Fei Pei, Peng Li,

6

Wenfei Xiong, Xinchun Shen, Qiuhui Hu

7 8

College of Food Science and Engineering, Nanjing University of Finance and

9

Economics/Key Laboratory of Grains and Oils Quality Control and Processing,

10

Collaborative Innovation Center for Modern Grain Circulation and Safety, Nanjing

11

210023, China

12 13

*Corresponding author: Yong Fang

14

E-mail: [email protected]

15

1

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

16

ABSTRACT

17

Protein hydrolysates, as surfactants, can scavenge radicals, but their poor distributions

18

at the oil-water interface limit their storage stability. Therefore, we studied covalent

19

interaction between rice protein hydrolysates and chlorogenic acid under alkaline

20

conditions to improve the physical and oxidative stability of oil-in-water emulsions.

21

Turbidity and particle size measurements demonstrated the formation of

22

hydrolysates-chlorogenic acid complexes, and their covalent interaction resulted in

23

the decrease and redshift of the fluorescence intensity. The emulsifying activity of the

24

hydrolysates could be effectively improved after the covalent interaction with 0.025%

25

chlorogenic acid. The modified emulsions possessed a notable physical stability

26

according to the least changes in size (0.08 μm) and ζ-potential (3.34 mV) of the

27

emulsion (P > 0.05). Moreover, the covalent interaction endowed modified emulsions

28

with high oxidative stability to effectively inhibit lipid oxidative deterioration during

29

storage. The adsorption of hydrolysates to the emulsion interface was increased by the

30

adequate addition of chlorogenic acid, resulting in the oil droplet being surrounded by

31

a thicker interfacial film. The covalent interaction between the protein hydrolysates

32

and chlorogenic acid could be used to construct natural emulsion systems with a

33

higher physical and oxidative stability during storage.

34

KEYWORDS

35

Rice; protein hydrolysates; chlorogenic acid; covalent interaction; emulsion; stability

36 37

2

ACS Paragon Plus Environment

Page 2 of 32

Page 3 of 32

Journal of Agricultural and Food Chemistry

38

INTRODUCTION

39

Systems of oil-in-water emulsion play an important role in improving texture,

40

appearance, stability, taste and nutrition attributes of common food products, such as

41

milk, ice cream and coffee.1, 2 However, emulsion systems are thermal sensitive, often

42

resulting in creaming, aggregation and flocculation during storage. To improve the

43

shelf-lives and resistances to the environmental stresses of commercial products, it

44

was necessary to add stabilizers including emulsifiers, thickening and gelling agents.3

45

Emulsifiers are considered significant components to stabilize emulsions for

46

functional attributes during long storage. Many emulsifiers now used to prepare stable

47

emulsions are synthetic surfactants (e.g., Tween-80 and Spans), or animal-based

48

emulsifiers, (e.g., whey protein and sodium caseinate).4 Nevertheless, food

49

manufacturers are increasingly interested in developing label-friendly natural

50

alternatives instead of synthetic surfactants, and using plant proteins instead of animal

51

proteins due to consumer demand for products with all-natural and clean labels.5

52

Recently, plant protein and their hydrolysates, such as zein hydrolysates 6 and

53

black bean protein hydrolysates,7 are potential emulsifiers due to their ability to

54

stabilize emulsion and to prevent oxidation.8 However, these common plant-based

55

proteins are not suitable for applications in food products with ‘‘clean” labels due to

56

potential allergenicity. Hirano et al.9 reported that rice proteins hardly had any

57

sequence similarity to known allergens in databases according to identification by

58

mass-based proteomics. Moreover, our unpublished study found that emulsions

59

containing trypsin hydrolysates from rice protein (4% degree of hydrolysis) were 3

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

60

more stable than other enzyme hydrolysates against a series of environmental stresses,

61

showing their potential for use as label friendly plant-based emulsifiers. Generally,

62

the stability of hydrolysates emulsions during storage was associated with

63

physicochemical properties of hydrolysates (i.e., size, charge, hydrophobicity), and

64

the physicochemical properties affected the interface distribution of hydrolysates in

65

emulsions.10 Then, protein hydrolysates are more effective in the aqueous phase and

66

the interface than in the lipid phase of emulsions, leading to limited oxidative

67

stability.11 To further improve lipid oxidation stability of emulsions, plenty of

68

methods have been reported, such as controlling storage conditions, adding

69

antioxidants, and engineering the interface.4 Currently, adding antioxidant to

70

oil-in-water protein emulsions has attracted interest to improve the storage stability

71

due to its ease of operation. Phenolic compounds, as common antioxidants, easily

72

bound to proteins, and this binding might improve functional properties of interface

73

proteins in emulsions.12 Cao and Xiong13 reported that the addition of chlorogenic

74

acid in protein emulsions effectively inhibited lipid oxidation due to the interaction

75

between proteins and phenolic compounds, resulting in the increase of phenolic

76

compound concentrations at the oil-water interface.

77

Phenolic compounds are also readily oxidized into quinones by polyphenol

78

oxidase and oxygen, binding with proteins by covalent interaction. The reducing or

79

antioxidant ability of the oxidized phenolics might be partially impaired due to

80

oxidation.14 However, these quinones could act as protein cross-linker. The oxidised

81

phenolic compounds can react with the nucleophilic groups of several amino acids 4

ACS Paragon Plus Environment

Page 4 of 32

Page 5 of 32

Journal of Agricultural and Food Chemistry

82

such as tryptophan, cysteine, methionine, histidine, tyrosine and proline, thus

83

inducing the cross-linking via those reactive groups.15 In addition, You et al.16 found

84

that catechin covalently bounding to lysine (residues 327) and glutamic acid (residues

85

186) in ovotransferrin could improve the antioxidant activity of ovotransferrin.

86

Moreover, Intarasirisawat, Benjakul, & Visessanguan 17 found that oxidized tannic

87

acid, acting as a protein cross-linker in protein-stabilized emulsions, could improve

88

the storage stability and oxidative stability of skipjack roe protein hydrolysate

89

emulsions. However, knowledge of the effect of oxidized polyphenols on the

90

interfacial distribution of protein in two-phase systems to improve the stability of the

91

emulsion is still unclear.

92

The objective of this study was to investigate the covalent interaction between

93

chlorogenic acid and rice protein hydrolysates by dynamic light scattering and

94

fluorescence. Additionally, the stability of emulsions prepared complexes of

95

chlorogenic acid and rice protein hydrolysates during storage was studied by

96

observing the zeta potential, droplet diameters, microstructures, peroxide values, and

97

2- thiobarbituric acid-reactive substances. Moreover, the effect of chlorogenic acid on

98

the interface distribution of protein in emulsion was assessed by the partition of

99

protein and by fourier transforms infrared spectroscopy (FTIR) of the emulsions to

100

elucidate the possible mechanism of oxidised phenolic compounds in improving

101

stability of rice protein hydrolysates emulsions.

102

MATERIALS AND METHODS

5

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

103

Materials. Rice protein powder (90%, w/w, dry basis) from rice endosperm were

104

purchased from Pioneer Biotech Co., Ltd. (Xi’an, Shan’xi Province, China). Trypsin

105

(≥ 2500 U/mg), chlorogenic acid and Nile Red were purchased from Sigma (St. Louis,

106

MO). Soybean oil was purchased from Luhua Co., Ltd. (Shandong province, China).

107

Other reagents were of analytical grade.

108

Preparation of rice protein hydrolysates. The trypsin hydrolysates of rice protein

109

were obtained at a degree of hydrolysis of 4% (which produced strong surface

110

hydrophobicity from unpublished tests), prepared according to the method described

111

elsewhere.18 In brief, rice protein powder (10 g) was dissolved in 150 mL of distilled

112

water and stirred for 0.5 h. Before hydrolysis, the rice protein solutions were adjusted

113

to 50 °C, pH 8.0. The mass ratio of enzyme to protein was 1 : 250 (w/w), and trypsin

114

(0.024%, w/v) was added into the mixed solutions to obtain a mixture containing

115

900,000 U of trypsin and rice protein at a concentration of 6% (w/v). After 0.5 h of

116

hydrolysis, the mixed solutions were heated to 90 °C for 10 min to terminate the

117

hydrolysis reaction and promptly cooled to ambient temperature. Finally, the pH was

118

adjusted to 7.0 in the mixture, followed by centrifuging at 12,000 × g for 15 min and

119

freeze-drying.

120

Interactions between protein hydrolysates and chlorogenic acid.

121

Turbidity and particle size measurements. Rice protein hydrolysates (2.5%, w/v)

122

mixed with different concentrations of chlorogenic acid (0 ~ 0.125%, w/v) were

123

dissolved in phosphate buffer at pH 9. After 24 h of shaking at room temperature, the 6

ACS Paragon Plus Environment

Page 6 of 32

Page 7 of 32

Journal of Agricultural and Food Chemistry

124

absorbance of the mixture was recorded at 600 nm as a measure of the turbidity. The

125

particle size and polydispersity index of the complexes were determined according to

126

dynamic light scattering (ZS-90, Malvern Instruments, Worcestershire, UK).

127

Experiments were conducted in triplicate.

128

Fluorescence spectroscopy. Fluorescence measurements were conducted according to

129

the method of reported by Wang, et al.19 with minor modification, using a

130

fluorescence spectrophotometer (F-7000, Hitachi, Tokyo, Japan). The fluorescence

131

intensity of the complexes was determined at emission wavelength from 310 to 400

132

nm and an excitation wavelength of 280 nm.

133

Preparation of complex of rice protein hydrolysates and chlorogenic acid. The

134

conjugation was performed by mixing different concentrations of chlorogenic acid

135

and rice protein hydrolysates as described above. Then, the free chlorogenic acid was

136

removed according to the method described by You et al (2014).16 The complexes

137

were transferred into dialysis tube with a 3000 molecular weight cutoff at 4 °C for 72

138

h with distilled water for dialysis, followed by freeze-drying. The contents of covalent

139

polyphones bounds in complexes prepared with different concentrations of

140

chlorogenic acid were calculated to 13.19 nmol/mg sample, 19.08 nmol/mg sample,

141

and 23.21 nmol/mg sample by the Folin-Ciocalteu method.20

142

Emulsions preparation. Emulsions were obtained by the method described by Qiu,

143

et al.21A mixture with a 10% oil phase (soybean oil, w/w) and a 90% (w/w) aqueous

144

phase of freeze-dried complex solution (2.5%, w/v) was homogenized using a

145

high-shear mixer (T18, IKA, Staufen, Germany) at 10,000 × g for 3 min. The coarse 7

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

146

emulsions were transported into a high-pressure homogenizer (DSJ-20L, ATS

147

Engineering Inc, Shanghai, China) and further homogenized at the pressure of 60 Mpa

148

for 2 cycles. Sodium azide (0.01%, w/v) was utilized to prevent microbial growth.

149

The measurements of size and ζ-potential in the emulsions were performed at day 1

150

and 7.

151

Emulsions characterization.

152

Particle size and ζ-potential measurement. The particle size, polydispersity index and

153

ζ-potential of the emulsions were examined using dynamic light scattering. The

154

distilled water was added to the emulsions to avoid multiple scattering before

155

measurement. All the measurements were performed in triplicate.

156

Emulsifying activity. The emulsifying activity index and the emulsifying stability

157

index were tested according to Molina, et al.22 with minor modifications. Fresh

158

emulsion (50 μL) was pipetted from the bottom of breaker at 0 and 30 min, followed

159

by dissolution with 5 mL of sodium dodecyl sulphate solution (0.1%, w/w). The

160

emulsifying activity index (EAI) and the emulsifying stability index (ESI) were

161

measured by the absorbance at 500 nm at 0 (A0) and 30 (A30) min, expressed as:

162

EAI (m2/g) = 2T × C

A0 × N × Ф × 10000

A30

163

ESI (%) =

164

where T= 2.303, N is the dilution factor, c is the weight of protein per unit

A0

165

volume (g/mL), and Ф is the oil volumetric fraction.

166

Oxidative stability. The oxidative stabilities of the emulsions were analysed by

167

peroxide value and the 2- thiobarbituric acid-reactive substances in emulsions for 7 8

ACS Paragon Plus Environment

Page 8 of 32

Page 9 of 32

Journal of Agricultural and Food Chemistry

168

days at 25 °C. The measurements of peroxide value were performed by sodium

169

thiosulphate titration in the AOCS standard procedure according to the method

170

reported by Ahn et al.23 The emulsion (100 uL) was mixed with 10 mL of glacial

171

acetic/chloroform (3:2, v/v) and saturated solution of KI (0.5 mL), followed by

172

stirring for 30 s. After reacting for 3 min in the dark, 30 mL of the distilled water was

173

added to terminate the reaction, and 0.5 mL of starch solution (0.5%, w/v) was

174

incorporated as an indicator. Then, the peroxide value was measured by titration of 2

175

mM sodium thiosulphate solution against above the mixtures. The 2- thiobarbituric

176

acid-reactive substances in emulsions during storage was measured according to Mei,

177

et al.24 The thiobarbituric acid solution (2 mL) was added into emulsions (1 mL) and

178

the mixed solutions was put in boiling distilled water for 15 min, followed by

179

centrifugation at 5,000 × g for 20 min at the ambient temperature. Then, the amount

180

of 2- thiobarbituric acid-reactive substances in emulsions was calculated from a

181

malonaldehyde standard curve prepared with 1,1,3,3-tetraethoxypropanesolution at an

182

absorbance of 532 nm.

183

Fluorescence microscopy. The microstructures of the emulsions were observed using

184

fluorescence microscopy at day 1 and 7. Before imaging, 20 μL of Nile Red solution

185

(0.1% w/w, ex/em wavelength = 488-530/575-580 nm) was added to the emulsions (1

186

mL). Then, 50 μL of the mixture was placed on a microscope slide and covered by a

187

cover slip, followed by the acquisition of images by digital images processing

188

software.

189

Partition of protein in emulsion. The measurement of the partition of the protein 9

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

190

hydrolysates emulsion was performed according to the procedure reported by Liu, et

191

al.25 The serum and cream layers of the emulsions containing different chlorogenic

192

acid concentrations were obtained by centrifuging at 15,000×g for 30 min, followed

193

by filtering of the serum layer by a 0.22 mm syringe filter. The Lowry’s method26 was

194

used to measure the hydrolysates concentration in the aqueous phase. Then, the

195

partition coefficient (PC) for the hydrolysates in the continuous phase was determined

196

by the method reported by Huang, et al.27, and calculated by the following equation:

197 198

PC =

Vw V1

Wt

× (Ww -1)

where Vw is the volume of hydrolysates solution, V1 is the volume of oil, Wt is

199

the total amount of protein concentration (mg/mL), and Ww is the protein

200

concentration of the aqueous phase (mg/mL). The percent of the protein in the

201

aqueous phase was calculated as (Ww/Wt) × 100%.

202

FTIR. FTIR measurements were performed using a Fourier transform infrared

203

spectrometer (Tensor 27, Bruker Optics Inc., Karlsruhe, Germany) equipped with an

204

attenuated total reflectance (ATR) accessory. The cream layer of the emulsions were

205

freeze-dried and the powder (10 mg) was mixed with potassium bromide (1 g),

206

followed by pressing in a tableting machine as test sample. A droplet of soybean oil

207

was placed on the ATR crystal as blank sample. Then, spectra in the range of 4000

208

cm-1 – 400 cm-1 were recorded for an average of 32 scans.

209

Statistical analysis. Analysis of variance (ANOVA) was conducted using the SAS

210

Software (Version 9.4, SAS Institute, Cary, NC). The means were compared by

211

Duncan’s test at a significance level of P < 0.05. 10

ACS Paragon Plus Environment

Page 10 of 32

Page 11 of 32

Journal of Agricultural and Food Chemistry

212

RESULTS and DISCUSSION

213

Effect of chlorogenic acid concentrations on the formation of complexes

214

Turbidity

215

Fig. 1A shows that the turbidity of the complexes between chlorogenic acid and rice

216

protein hydrolysates increased with increasing concentration of the chlorogenic acid.

217

Turbidity formation, a complicated process, could be affected by several elements e.g.

218

particle diameter, colour, and particle interactions.28 In addition, the turbidity of the

219

mixture did not initially change substantially at the concentrations of chlorogenic acid

220

less than 0.075% (P > 0.05) and some obvious mixtures aggregates were observed at

221

concentrations of chlorogenic acid higher than 0.100%. The increase in turbidity

222

might be due to the interactions between the hydrolysates and a higher concentration

223

of chlorogenic acid, leading to the micro-aggregation of the complex.

224

Sizes

225

To provide some further information regarding the complexes, the particle sizes and

226

polydispersity index values of complexes were measured (Fig. 1B). When the

227

concentration of chlorogenic acid was 0.075%, the particle size was 603 nm and the

228

particle size values significantly differed from (P < 0.05) complexes with a higher

229

chlorogenic acid concentration. In addition, the polydispersity index of the complexes

230

was around 0.85 at concentration of chlorogenic acid higher than 0.075%, indicating

231

obvious aggregations. Le and Renard29 found that polyphenols could bridge proteins

232

at appropriate mass ratio by multidentate ligands and polyphenols improved the 11

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

233

achievement of the metastable dispersions of particles. Furthermore, increasing the

234

amount of polyphenols could result in phase separation. In our study, chlorogenic

235

acid-rice protein hydrolysates complexes were soluble at concentrations of

236

chlorogenic acid less than 0.075% based on nephelometry data and dynamic light

237

scattering analysis. Therefore, all subsequent experiments were controlled at a

238

concentration of chlorogenic acid less than 0.075%.

239

Fluorescence measurements

240

Fig. 2 gives the maximum emission wavelength of rice protein hydrolysates

241

containing different concentrations of chlorogenic acid. The fluorescence intensity

242

significantly decreased and the maximum emission was redshifted from 347 nm to

243

363 nm with higher chlorogenic acid concentrations. These differences in

244

fluorescence intensity might be caused by the participation of aromatic amino acids

245

(e.g. tyrosine and tryptophan) in the covalent reaction of the rice protein hydrolysates

246

with the chlorogenic acid. A similar result was reported in which covalent bonding

247

between gelatine and gallic acid or catechin led to the redshifted fluorescence.30

248

Moreover, the redshift of the emission maximum of complexes showed the

249

conformational changes at the tertiary structures of hydrolysates due to the shift of the

250

emission maximum reflecting the changes in the polarity of the tyrosine and

251

tryptophan residues.31 Generally, the redshift of the spectrum resulted from the

252

exposure of tyrosine and tryptophan residues to the solvent, whereas a blue shift is a

253

consequence of transferring tyrosine and tryptophan residues into a more hydrophobic

254

environment.32 Therefore, the redshift here indicated that tyrosine and tryptophan 12

ACS Paragon Plus Environment

Page 12 of 32

Page 13 of 32

Journal of Agricultural and Food Chemistry

255

residues were in a more hydrophilic environment due to the tertiary structural change

256

of protein hydrolysates. The intensity of the maximum fluorescence emission in the

257

complexes was decreased and redshifted, indicating conformational changes. Then,

258

these changes could result in the unfolding and denaturation of rice protein

259

hydrolysates.33

260

Effect of chlorogenic acid concentrations on the stability of rice protein

261

hydrolysate emulsions

262

Emulsifying properties

263

As shown in Table 1, the emulsifying activity index of emulsions first increased and

264

then decreased at higher concentration of chlorogenic acid. The emulsifying activity

265

index of the emulsions containing 0.025% chlorogenic acid reached to maximum

266

values (25.03 m2/g) and it significantly differed from the others (P < 0.05). Then, the

267

emulsifying stability index exhibited the same tendency and emulsions containing

268

0.025% chlorogenic acid could significantly enhance the emulsifying stability index

269

of hydrolysates emulsions from 89.23 to 93.57% (P < 0.05). It has been reported that

270

the emulsifying properties depend on the protein–protein and protein–lipid

271

interactions.34 The appropriate chlorogenic acids might change the protein-protein

272

interaction and this change decreased the free energy to reduce the interfacial tension

273

of the oil-in-water interface.35 Then, the decrease in the emulsifying properties of the

274

protein hydrolysates emulsions containing a higher chlorogenic acid concentration

275

might be attributed to the obvious aggregation (Fig. 1). Similarly, Cao, et al.36 13

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

276

reported that higher concentration levels of (−)-epigallocatechin-3-gallate decreased

277

the emulsifying activity of porcine myofibrillar protein due to the extensive

278

aggregation.

279

Physical stability

280

Fig. 3 shows the size and ζ-potential values of emulsions prepared with protein

281

hydrolysates containing different chlorogenic acid concentrations. After 7 days of

282

storage, the polydispersity index of emulsion containing chlorogenic acid at a

283

concentration of 0.025% were less than 0.2 during storage, showing a uniform size

284

distribution.37 In addition, there was no significant (P > 0.05) change in the sizes of

285

the hydrolysates emulsions containing chlorogenic acid at a concentration of 0.025%

286

from 0.24 μm to 0.32 μm. Intarasirisawat, Benjakul, & Visessanguan11 reported that

287

quinone resulted from the oxidation of the polyphenols under alkaline conditions and

288

created a dimer in a side reaction. Then, polypeptides might form covalent C-N or

289

C-S bonds with phenolic rings and their amino or sulphydryl side chains could also

290

react with the dimer. Hence, the addition of chlorogenic acid could induce some

291

cross-linking of protein hydrolysates and it might increase the physical stability of the

292

film surrounding the oil droplets. Additionally, the increases in particle size of the

293

other emulsions with higher chlorogenic acid concentrations were notable (P < 0.05),

294

and the polydispersity index of these emulsions was higher than 0.5 after storage.

295

These changes during storage indicated that the instability of the emulsions might be

296

due to the aggregation mechanism.

14

ACS Paragon Plus Environment

Page 14 of 32

Page 15 of 32

297

Journal of Agricultural and Food Chemistry

The ζ-potentials of the hydrolysates emulsions with chlorogenic acid at different

298

concentrations was examined in Fig. 3B to further clarify their storage stability. The

299

hydrolysates emulsion without chlorogenic acid showed approximately -27.70 mV at

300

pH 9.0. Then, the hydrolysates emulsions incorporated with 0.025% chlorogenic acid

301

exhibited minimum potential (-30.77 mV) and it significantly differed from the others

302

(P < 0.05). The charge change can be attributed to the fact that chlorogenic acid

303

might adjoin some positively charged amino acid residue or lead inter-/intra

304

molecular cross-linking, masking negatively charged residues. Additionally,

305

ζ-potential was related to the stability of the emulsions, and an absolute value of

306

charge higher than 30 mV was considered to possess more electrostatic stability than

307

emulsions with an absolute value of charge lower than 30 mV.38 These observations

308

might also demonstrate the changes in the particles during storage.

309

Oxidative stability

310

Fig. 4 gives the peroxide value and the 2- thiobarbituric acid-reactive substances to

311

evaluate the oxidative stability of the emulsions containing hydrolysates and

312

chlorogenic acid at different mass ratios. The peroxide value of the emulsions

313

exhibited an increasing tendency during storage, the control was 3.69 mmol/kg oil on

314

day 1 and the amount grew quickly during storage, reaching a value twice that of the

315

initial emulsions after 7 days of storage. In comparison, the peroxide value of the

316

emulsion with 0.025% chlorogenic acid changed from 3.39 mmol/kg oil to 5.21

317

mmol/kg oil after 7 days of storage, and it always showed the lowest peroxide value.

318

This result occurred because phenolic compounds binding to protein could more 15

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

319

effectively inhibit lipid oxidation than free phenolics due to the free forms being more

320

prevalent in the aqueous phase.39 However, the emulsions with 0.075% chlorogenic

321

acid could not effectively inhibit lipid oxidation according to the change in peroxide

322

values and the 2- thiobarbituric acid-reactive substances. The addition of higher

323

amounts of chlorogenic acid might result in the aggregates of protein (Fig. 1) and

324

phase separation of emulsions. Then, chlorogenic acid might concentrate in aqueous

325

phase and might not enter the oil-water interface, showing lipid oxidation occurred at

326

the interface. Additionally, the emulsions with 0.025% chlorogenic acid significantly

327

reduced the 2-thiobarbituric acid-reactive substances levels, which might be due to a

328

small amount of chlorogenic acid absorbing to the interface of the emulsions and

329

possessing excellent radical scavenging activity.

330

Microstructures

331

Fig. 5 gives the microstructures of the emulsions containing different concentrations

332

of chlorogenic acid during 7 days of storage as observed by fluorescence microscopy.

333

After a day of storage, microscopy images of the hydrolysates emulsions with 0.075%

334

chlorogenic acid exhibited larger particulate clusters or clumps of oil droplets, while

335

the other emulsions showed smaller oil droplets. After emulsions were storaged for 7

336

days, the flocculation was found in the hydrolysate emulsion without chlorogenic

337

acid, and the oil droplets in the emulsions with 0.075% chlorogenic acid were further

338

aggregated. It was noted that the smaller changes in the droplet sizes of the emulsions

339

with 0.025% chlorogenic acid took place during storage (Fig. 3A), demonstrating that

340

0.025 % chlorogenic acid binding with hydrolysates can enhance the storage stability 16

ACS Paragon Plus Environment

Page 16 of 32

Page 17 of 32

Journal of Agricultural and Food Chemistry

341

of emulsions.

342

Effect of chlorogenic acid concentrations on the proteins of emulsions

343

Partition of protein in emulsions

344

Table 1 shows the protein in the aqueous phases of hydrolysate emulsions with

345

different concentrations of chlorogenic acid. The proteins in the aqueous phase of

346

emulsions without chlorogenic acid were 91.02%, and it was significantly decreased

347

to 86.72% at a concentration of 0.025% chlorogenic acid. Lee, et al.40 found that

348

emulsions with more interface proteins around the oil droplet formed a more flexible

349

membrane resulting in higher physical stability. In addition, as the chlorogenic acid

350

concentration increased, the protein in the aqueous phase of the hydrolysates emulsion

351

increased to 92.61%. This phenomenon showed that chlorogenic acid improved the

352

hydrolysates capacity to adsorb to the surface of the oil droplet in a competitive

353

manner. The polypeptide originally adsorbing on the interface was partially replaced

354

by moderate chlorogenic acid or chlorogenic acid binding to hydrolysates indirectly

355

adsorbed to the surface of the oil droplet. Elias, Kellerby and Decker 8 found that the

356

main oxidation occurred at the interface of the oil droplets containing concentrated

357

lipid hydroperoxides. The partitioning of protein hydrolysates showed that the

358

complexes possessed a stronger physical barrier and it could enhance the physical

359

(Fig. 3) and oxidative stability (Fig. 4) of the emulsions during storage.

360

FT-IR

361

As presented in Fig. 6, the spectra of the cream layer of rice protein hydrolysates

362

emulsions showed major bands at 3441 cm-1 (amide A, representative of N-H 17

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

363

stretching coupled with hydrogen bonding), 1653 cm-1 (amide I, representative of C-O

364

stretching/hydrogen bonding coupled with COO-) and 1548 cm-1 (amide II,

365

representative of C-N stretching coupled with NH bending modes). The functional

366

groups of soybean oil were substantially identical to these the rice protein

367

hydrolysate, resulting in similar peaks of FT-IR. However, the C=C stretching (1650

368

cm-1) of soybean oil was not found at hydrolysates, and it can be due to the fact weak

369

peak of C=C stretching might be easily be covered by the amide I.41 Additionally, the

370

FT-IR of the cream layer in the emulsions with 0.025% chlorogenic acid was

371

measured to confirm the interaction between the interface hydroysates and

372

polyphenols. The analysis of the amide bands was important for the secondary

373

structures of protein due to its sensitivity to hydrogen bonding, dipole-dipole

374

interactions, and the geometry of the polypeptide backbone. 42 Generally, spectra of

375

the complexes showed different amide I (1656 cm−1) and amide II (1545 cm−1) bands

376

and it exhibited different secondary structures of the protein.26 Moreover, none new

377

peaks in the spectra also indicated the interaction between hydrolysates in the cream

378

layer and polyphenols.

379

In conclusion, covalent interaction between hydrolysates and chlorogenic acid

380

could improve the physical and oxidative stability of hydrolysates emulsions. The

381

addition of a moderate amount of chlorogenic acid improved the adsorption of protein

382

onto the oil-water interface during storage, resulting in the interfacial membrane being

383

more compact in the emulsion. Hence, our study suggested that the combination of

18

ACS Paragon Plus Environment

Page 18 of 32

Page 19 of 32

Journal of Agricultural and Food Chemistry

384

hydrolysates with chlorogenic acid has excellent application potential for improving

385

the stability of a natural emulsion system during a long storage.

386

ACKNOWLEDGEMENTS

387

This work was financially supported by the National Key Research and Development

388

Program of China (Grant no. 2017YFD0401105), the National Youth Talent in Grain

389

Area Support Program of China, and the Priority Academic Program Development of

390

Jiangsu Higher Education Institutions (PAPD).

391

CONFLICTS OF INTEREST

392

The authors declare no competing financial interest.

393

REFERENCES

394

1.

395

Droplet

396

bioavailability of long chain fatty acids and Coenzyme Q10. Food Chem. 2014, 156,

397

117-122.

398

2.

399

systems for flavor compounds-A review. Crit. Rev. Food Sci. Nutr. 2015, 57(15),

400

3173-3187.

401

3.

402

oxidation and digestibility of fish oil-in-water emulsions: Gliadin, caseinate, and

403

whey protein. Food Chem. 2015, 175, 249-257.

404

4.

405

phospholipids, biopolymers, and colloidal particles: Molecular and physicochemical

406

basis of functional performance. Adv. Colloid Interfac. 2016, 234, 3-26.

407

5.

408

natural emulsifiers to form and stabilize emulsions. Annu. Rev. Food Sci. T. 2017, 8,

409

205-236.

Cho, H. T.; Salvia-Trujillo, L.; Kim, J.; Park, Y.; Xiao, H.; Mcclements, D. J., size

and

composition

of

nutraceutical

nanoemulsions

influences

Mao, L.; Roos, Y. H.; Biliaderis, C. G.; Miao, S., Food emulsions as delivery

Qiu, C.; Zhao, M.; Decker, E. A.; Mcclements, D. J., Influence of protein type on

Mcclements, D. J.; Gumus, C. E., Natural emulsifiers - Biosurfactants,

Mcclements, D. J.; Bai, L.; Chung, C., Recent advances in the utilization of

19

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

410

6.

Li, Y.; Kong, B.; Liu, Q.; Xia, X.; Chen, H., Improvement of the emulsifying and

411

oxidative stability of myofibrillar protein prepared oil-in-water emulsions by addition

412

of zein hydrolysates. Process Biochem. 2016, 53, 116-124.

413

7.

414

E. R., Black bean (Phaseolus vulgaris L.) protein hydrolysates: Physicochemical and

415

functional properties. Food Chem. 2017, 214, 460-467.

416

8.

417

peptides. Crit. Rev. Food Sci. Nutr. 2008, 48, 430-441.

418

9.

419

T., Evaluation of allergenic potential for rice seed protein components utilizing a rice

420

proteome database and an allergen database in combination with IgE-binding of

421

recombinant proteins. Biosci. Biotech. Bioch. 2016, 80, 564-573.

422

10. Schroder, A.; Berton-Carabin, C.; Venema, P.; Cornacchia, L., Interfacial

423

properties of whey protein and whey protein hydrolysates and their influence on O/W

424

emulsion stability. Food Hydrocolloid. 2017, 73, 129-140.

425

11. Frankel, E. N.; Huang, S. W.; Kanner, J.; German, J. B., Interfacial phenomena in

426

the evaluation of antioxidants: Bulk oils vs emulsions. J. Agric. Food Chem. 1994, 42,

427

1054-1059.

428

12. Ozdal, T.; Capanoglu, E.; Altay, F., A review on protein–phenolic interactions

429

and associated changes. Food Res. Int. 2013, 51, 954-970.

430

13. Cao, Y.; Xiong, Y. L., Chlorogenic acid-mediated gel formation of oxidatively

431

stressed myofibrillar protein. Food Chem. 2015, 180, 235-243.

432

14. Aewsiri, T.; Benjakul, S.; Visessanguan, W.; Wierenga, P. A.; Gruppen, H.,

433

Antioxidative activity and emulsifying properties of cuttlefish skin gelatin–tannic acid

434

complex as influenced by types of interaction. Innov. Food Sci. Emerg. 2010, 11,

435

712-720.

436

15. Kroll, J.; Rawel, H. M.; Rohn, S., Reactions of plant phenolics with food proteins

437

and enzymes under special consideration of covalent bonds. Food Sci. Technol. Res.

438

2007, 9, 205-218.

439

16. You J.; Luo Y. K.; Wu J. P., Conjugation of ovotransferrin with catechin shows

Evangelho, J. A.; Vanier, N. L.; Pinto, V. Z.; Berrios, J. J.; Dias, A. R.; Zavareze,

Elias, R. J.; Kellerby, S. S.; Decker, E. A., Antioxidant activity of proteins and

Hirano, K.; Hino, S.; Oshima, K.; Nadano, D.; Urisu, A.; Takaiwa, F.; Matsuda,

20

ACS Paragon Plus Environment

Page 20 of 32

Page 21 of 32

Journal of Agricultural and Food Chemistry

440

improved antioxidant activity. J. Agric. Food Chem. 2014, 62, 2581-2587.

441

17. Intarasirisawat, R.; Benjakul, S.; Visessanguan, W., Stability of emulsion

442

containing skipjack roe protein hydrolysate modified by oxidised tannic acid. Food

443

Hydrocolloid. 2014, 41, 146-155.

444

18. Phoon, P. Y.; Narsimhan, G., Effect of hydrolysis of soy β-conglycinin on the

445

oxidative stability of O/W emulsions. Food Hydrocolloid. 2014, 35, 429-443.

446

19. Wang, Y. H.; Wan, Z. L.; Yang, X. Q.; Wang, J. M.; Guo, J.; Lin, Y., Colloidal

447

complexation of zein hydrolysate with tannic acid: Constructing peptides-based

448

nanoemulsions for alga oil delivery. Food Hydrocolloid. 2015, 54, 40-48.

449

20. Li, H.; Xu, H.; Xuan, L.; He, W.; Fang, Y.; Hou, Z.; Gao, Y., Identification of

450

phenolic compounds from pomegranate (Punica granatum L.) seed residues and

451

investigation into their antioxidant capacities by HPLC–ABTS+ assay. Food Res. Int.

452

2011, 44, 1161-1167.

453

21. Qiu, C.; Zhao, M.; Mcclements, D. J., Improving the stability of wheat

454

protein-stabilized emulsions: Effect of pectin and xanthan gum addition. Food

455

Hydrocolloid. 2015, 43, 377-387.

456

22. Molina, E.; Papadopoulou, A.; Ledward, D. A., Emulsifying properties of high

457

pressure treated soy protein isolate and 7S and 11S globulins. Food Hydrocolloid.

458

2001, 15, 263-269.

459

23. Ahn, J. H.; Kim, Y. P.; Lee, Y. M.; Seo, E. M.; Lee, K. W.; Kim, H. S.,

460

Optimization of microencapsulation of seed oil by response surface methodology.

461

Food Chem. 2008, 107, 98-105.

462

24. Mei, L.; Mcclements, D. J.; Wu, J.; Decker, E. A., Iron-catalyzed lipid oxidation

463

in emulsion as affected by surfactant, pH and NaCl. Food Chem. 1998, 61, 307-312.

464

25. Liu, H.; Li, Y.; Diao, X.; Kong, B.; Liu, Q., Effect of porcine bone protein

465

hydrolysates on the emulsifying and oxidative stability of oil-in-water emulsions.

466

Colloid Surface A. 2018, 538, 757-764.

467

26. Lowry, O. H.; Rosebrough, N. J.; Farr, A. L.; Randall, R. J., Protein measurement

468

with the Folin phenol reagent. J. Biol. Chem. 1951, 193, 265-275.

469

27. Huang, S. W., Frankel, E. N., Aeschbach, R., German, J. B. (1997). Partition of 21

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 22 of 32

470

selected antioxidants in corn oil-water model systems. J. Agric. Food Chem. 45(6),

471

1991-1994.

472

28. Patel, A. R.; Drost, E.; Blijdenstein, T. B. J.; Velikov, K. P., Cover picture: Stable

473

and temperature-responsive surfactant-free foamulsions with high oil-olume fraction

474

(ChemPhysChem 17/2012). Chemphyschem 2012, 13, 3741-3741.

475

29. Le, B. C.; Renard, C. M., Interactions between polyphenols and macromolecules:

476

quantification methods and mechanisms. Crit. Rev. Food Sci. Nutr. 2012, 52,

477

213-248.

478

30. Spizzirri, U. G.; Parisi, O. I.; Iemma, F.; Cirillo, G.; Puoci, F.; Curcio, M.; Picci,

479

N., Antioxidant–polysaccharide conjugates for food application by eco-friendly

480

grafting procedure. Carbohyd. Polym. 2010, 79, 333-340.

481

31. Shang, L.; Wang, Y.; Jiang, J.; Dong, S., pH-dependent protein conformational

482

changes

483

study. Langmuir 2007, 23(5), 2714-2721.

484

32. Pan, B. F.; Gao, F.; Ao, L. M., Investigation of interactions between

485

dendrimer-coated magnetite nanoparticles and bovine serum albumin. J. Magn. Magn.

486

Mater. 2005, 293, 252-258.

487

33. Liu, F.; Sun, C.; Yang, W.; Yuan, F.; Gao, Y., Structural characterization and

488

functional evaluation of lactoferrin-polyphenol conjugates formed by free-radical

489

graft copolymerization. Rsc Adv. 2015, 5, 15641-15651.

490

34. Bos, M. A.; Van, V. T., Interfacial rheological properties of adsorbed protein

491

layers and surfactants: a review. Adv. Colloid Interfac. 2001, 91, 437-471.

492

35. Perrin, E.; Bizot, H.; Cathala, B.; Capron, I., Chitin nanocrystals for pickering

493

high internal phase emulsions. Biomacromolecules 2014, 15, 3766-71.

494

36. Cao,

495

(-)-epigallocatechin-3-gallate incorporation on the physicochemical and oxidative

496

stability of myofibrillar protein-soybean oil emulsions. Food Chem. 2018. 245,

497

439-445.

498

37. Zhang, Y.; Chen, T.; Abbas, S.; Eric, K.; Xia, S.; Zhang, X., Modified SPI

499

improves the emulsion properties and oxidative stability of fish oil microcapsules.

in

Y.;

albumin:

Ai,

gold

N.;

nanoparticle

True,

A.

D.;

bioconjugates:

Xiong,

22

ACS Paragon Plus Environment

Y.

a

L.,

spectroscopic

Effects

of

Page 23 of 32

Journal of Agricultural and Food Chemistry

500

Food Hydrocolloid. 2015, 51, 108-117.

501

38. Wang, Y.; Li, D.; Wang, L. J.; Adhikari, B., The effect of addition of flaxseed

502

gum on the emulsion properties of soybean protein isolate (SPI). J. Food Eng. 2011,

503

104, 56-62.

504

39. Aewsiri, T.; Benjakul, S.; Visessanguan, W.; Wierenga, P. A.; Gruppen, H.,

505

Emulsifying property and antioxidative activity of cuttlefish skin gelatin modified

506

with oxidized linoleic acid and oxidized tannic acid. Food Bioprocess Tech. 2013, 6,

507

870-881.

508

40. Lee, S. H.; Lefèvre, T.; Subirade, M.; Paquin, P., Effects of ultra-high pressure

509

homogenization on the properties and structure of interfacial protein layer in whey

510

protein-stabilized emulsion. Food Chem. 2009, 113, 191-195.

511

41. Yang, H.; Irudayaraj, J.; Paradkar, M. M., Discriminant analysis of edible oils

512

and fats by FTIR, FT-NIR and FT-Raman spectroscopy. Food Chem. 2005, 93(1),

513

25-32.

514

42. Carton, I.; Bocker, U.; Ofstad, R., Monitoring secondary structural changes in

515

salted and smoked salmon muscle myofiber proteins by FT-IR microspectroscopy. J.

516

Agri. Food Chem. 2009, 57, 3563-3570.

517 518

23

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

519

Figure captions: Figure 1. Influence of chlorogenic acid concentrations on the (A) turbidity, (B) particle size of complexes formed with rice protein hydrolysates. (RPH, rice protein hydrolysates; CA, chlorogenic acid; PDI, polydispersity index). Figure 2. Effect of chlorogenic acid concentrations on quenching of rice protein hydrolysates fluorescence. (RPH, rice protein hydrolysates; CA, chlorogenic acid). Figure 3. Droplet size (A) and ζ- potential (B) of emulsions prepared with rice protein hydrolysates emulsions containing different chlorogenic acid concentrations after room temperatures storage 1 and 7 days. Values are given as the means ± SD; different lowercase letters (a-d) differ significantly (P < 0.05) among the emulsions prepared with rice protein hydrolysates emulsions containing different chlorogenic acid concentrations, while * indicated significant difference (P < 0.05) among emulsions after storage for 1 and 7 days. (PDI, polydispersity index) Figure 4. Formation of peroxide values (POV) (A) and thiobarbituric acid-reactive substances (TBARS) (B) of the oil-in-water emulsions containing rice protein hydrolysates and chlorogenic acid at different concentrations at ambient temperature for 7 days. Figure 5. Fluorescence microscopy of the oil-in-water emulsions containing rice protein hydrolysates and chlorogenic acid at different concentrations magnification; 400×. A, emulsions containing rice protein hydrolysates alone; B, rice protein hydrolysates emulsions containing 0.025% chlorogenic acid; C, rice protein hydrolysates emulsions containing 0.050% chlorogenic acid; D, rice protein hydrolysates emulsions containing 0.075% chlorogenic acid. Figure 6. The FTIR spectra of cream layer in emulsions prepared with RPH and RPH-CA complex with an addition of 0.025% CA. (RPH, rice protein hydrolysates; CA, chlorogenic acid). 24

ACS Paragon Plus Environment

Page 24 of 32

Page 25 of 32

Journal of Agricultural and Food Chemistry

Figure 1

(A) 0.8 start to precipitate

0.7

Turbidity

0.6 0.5 0.4 corresponding to CA concentration of 0.0075%

0.3 0.2 0.000

3000

0.050 0.075 0.100 CA concentration (%, w/v)

0.125

1.2 Size PDI

1.0 0.8

Size(nm)

2000

0.6

1000

0.4

350 300

0.2

250

0.0

200 0.000

0.025

0.050

0.075 0.100 CA concentration (%, w/v)

25

ACS Paragon Plus Environment

0.125

PDI

(B) 4000

0.025

Journal of Agricultural and Food Chemistry

Page 26 of 32

Figure 2 3500

RPH RPH+0.025% CA RPH+0.050% CA RPH+0.075% CA

Fluorescence intensity

3000 2500 2000 1500 1000 500 0

320

340

360

380

Wavelength (nm)

26

ACS Paragon Plus Environment

400

Page 27 of 32

Journal of Agricultural and Food Chemistry

Figure 3 day 1 day 7

1.2

PDI

(B)

1.2

0.8

0.3 0.0

b* b

b

a

0.0

c b

-potential (mv)

b*

0.6

0.025%

0.050%

Chlorogenic acid (%, w/v)

0.050%

0.075%

-10 -15 -20

0.075%

a*

-25 -30

0

0.025%

-5

0.9 0.4 0.2

Chlorogenic acid (%, w/v)

0

0

a*

PDI

Mean Particle Diameter (m)

(A) 1.5

-35

27

ACS Paragon Plus Environment

a* b* a

b

c d

c

day 1 day 7

Journal of Agricultural and Food Chemistry

Page 28 of 32

Figure 4

(A) 12

RPH RPH+0.025CA RPH+0.050CA RPH+0.075CA

POV(mmol/kg oil)

10 8

a b a

6

a

a

4

a

a

b

a a

b

a

b

c c

b

d

c

c

b

2 0

0

1

3

7

5

Storage time (days)

TBARS (mmol/ kg oil)

(B) 1.6

RPH RPH+0.025CA RPH+0.050CA RPH+0.075CA

1.2

a

a

b

c

a a

0.8

b

b c c

a

b a a a

b c

d

d

d

0.4

0.0

0

1

3 5 Storage time (days)

28

ACS Paragon Plus Environment

7

Page 29 of 32

Journal of Agricultural and Food Chemistry

Figure 5 RPH+0.050% CA

RPH+0.025% CA

RPH

RPH+0.075% CA

Day 1

5 μm

5 μm

5 μm

5 μm

5 μm

5 μm

5 μm

Day 7

29

ACS Paragon Plus Environment

5 μm

Journal of Agricultural and Food Chemistry

Page 30 of 32

Figure 6

Transmittance (%)

RPH RPH+0.025% CA Soybean oil

3441.13

1548.99

1653.121460.96

3009.59 2853.76

734.17

1745.09 1545.04 1462.41 731.22

3423.08

1656.11

3008.49 2855.86

1747.17 1650.18

1465.40 2856.37 2925.65

3500

722.90

1748.20

3000 2000 1500 Wavelength (nm)

1000

500

30

ACS Paragon Plus Environment

Page 31 of 32

Journal of Agricultural and Food Chemistry

Table 1. Emulsifying properties and partition of proteins in the aqueous phase versus at the interfacial membrane in oil-in-water emulsions prepared with rice protein hydrolysates containing different chlorogenic acid (CA) concentrations.

CA (%,w/w) EAI(m2/g)

ESI(%)

Proteins in the

Partition coefficient

aqueous phase (%)

(aqueous phase)

0

23.64±0.76b

89.23±0.15b

91.02±1.18a

0.89

0.025

25.03±0.66a

93.57±1.45a

86.72±1.02c

1.37

0.050

22.30±0.27c

87.87±0.81b

88.97±0.62b

1.12

0.075

21.23±0.47c

83.87±0.58c

92.61±1.32a

0.72

Values are given as means ± SD from triplicate determinations. Different letters in the same column mean significant difference at P < 0.05. (EAI, emulsifying activity index, ESI, emulsifying stability index).

31

ACS Paragon Plus Environment

Journal of Agricultural and Food Chemistry

Page 32 of 32

Rice protein hydrolysates

OH OH OH HO

+ HO

HO

OH

OH HO HO

HO OH OH

-

OH

OH OH HO HO OH

HO

-

HO

OH

HO

OH

-

HO HO OH

+

+

OH

HO

OH

OH

OH

HO

HO

HO

HO

OH

OH

OH

OH

HO

HO

OH HO

HO OH

OH

OH HO HO

OH HO

OH HO HO

HO

Homogenization Chlorogenic acid

The covalent interaction between rice protein hydrolysates and chlorogenic acid could improve adsorption of protein onto the oil-water interface and a thicker interfacial film around oil of rice protein hydrolysates emulsions, resulting in a higher storage stability.

ACS Paragon Plus Environment