Density and Refractive Index of the Binary Mixtures of Cyclohexane

Department of Chemistry, Karnatak University, Dharwad 580 003, India. J. D. Ortego, and K. C. Hansen ... Citing Articles; Related Content. Citation da...
0 downloads 0 Views 123KB Size
526

J. Chem. Eng. Data 1996, 41, 526-528

Density and Refractive Index of the Binary Mixtures of Cyclohexane with Dodecane, Tridecane, Tetradecane, and Pentadecane at (298.15, 303.15, and 308.15) K T. M. Aminabhavi,* V. B. Patil, and M. I. Aralaguppi Department of Chemistry, Karnatak University, Dharwad 580 003, India

J. D. Ortego and K. C. Hansen Department of Chemistry, Lamar University, Beaumont, Texas 77710

Experimental values of density and refractive index are presented for the binary mixtures of cyclohexane with dodecane, tridecane, tetradecane, and pentadecane over the whole range of mixture compositions at (298.15, 303.15, and 308.15) K. These data are used to calculate the excess molar volume and deviations in molar refractivity. The excess quantities are fitted to the Redlich-Kister equation to estimate the values of the binary interaction parameters and values of the standard errors. The excess molar volume data at 298.15 K have been compared with the available literature findings for the mixtures of cyclohexane with dodecane and tetradecane.

Introduction In our preceding paper (Aminabhavi et al., 1996), the experimental values of density, viscosity, and refractive index have been reported for the binary mixtures of cyclohexane with lower n-alkanes, viz., hexane to decane. In continuation of that study, we now present the experimental results of density, F, and refractive index, nD, for the sodium D line for the binary mixtures of cyclohexane with higher n-alkanes, viz., dodecane (C12), tridecane (C13), tetradecane (C14), and pentadecane (C15), at (298.15, 303.15, and 308.15) K over the whole range of mixture compositions. From these data, the excess molar volume, VE, and deviations in molar refractivity, ∆R, have been calculated. To calculate the molar refractivity, Ri of pure components and Rm of mixtures, we have employed the Lorentz-Lorenz and Eykman equations. The calculated quantities have been fitted to the Redlich-Kister equation (Redlich and Kister, 1948) using the multiparametric Marquardt algorithm (Marquardt, 1963) to estimate the required number of binary interaction parameters, Ai, and standard error values, σ. The equimolar VE results of some of the systems studied in this paper are compared with the available literature data. Experimental Section Materials and Methods. Cyclohexane was purchased from BDH (London). The analytical grade dodecane, tridecane, tetradecane, and pentadecane were purchased from S. D. Fine Chemicals Ltd., Bombay. The solvents were used directly and their purity was ascertained by comparing their density and refractive index values with those in the literature (see Table 1). The GLC purity estimations of the liquids are also included in Table 1. The preparations of the binary mixtures and mass, density, and refractive index measurements of the pure liquids and their binary mixtures are the same as described in the preceding paper (Aminabhavi et al., 1996). * To whom all correspondences should be addressed. Fax: 91-836347884.

0021-9568/96/1741-0526$12.00/0

Table 1. Comparison of Experimental Densities (G) and Refractive Indices (nD) of Pure Liquids with Literature Values at 298.15 K nD

F/g‚cm-3 liquid (mol % purity)

expt

lit.

expt

lit

ref

cyclohexane (>99.6) dodecane (>99.8)

0.7740 0.7739 1.4235 1.4235 Marsh, 1994 0.7454 0.7452 1.4187 1.4195 Riddick et al., 1986 tridecane (>99.5) 0.7513 0.7527 1.4239 1.4235 Riddick et al., 1986 tetradecane (>99.4) 0.7596 0.7592 1.4263 1.4268 Marsh, 1994 pentadecane (>99.6) 0.7650 0.7649 1.4279 1.4297 Marsh, 1994

Results and Discussion From the experimental values of F and nD presented in Table 2, excess molar volume, VE, and deviations in molar refractivity, ∆R, have been calculated as (Aminabhavi, 1994)

VE/cm3‚mol-1 ) Vm - V1x1 - V2x2

(1)

∆R/cm3‚mol-1 ) Rm - R1φ1 - R2φ2

(2)

In the above equations, the terms Vi and Vm represent the molar volume of the ith component and of the mixture, respectively; xi refers to mole fraction of the ith component of the mixture. Similarly, Ri and Rm are the molar refractivities of the individual components and of the mixture. Following our earlier publications (Aminabhavi et al., 1994; Aminabhavi and Bindu, 1995), the volume fraction, φi, calculated using 2

∑x V

φi ) xiVi/

i

i

(3)

i)1

was used to compute refractivities using the LorentzLorenz and Eykman equations. © 1996 American Chemical Society

Journal of Chemical and Engineering Data, Vol. 41, No. 3, 1996 527 Table 2. Experimental Densities (G) and Refractive Indices (nD) of Binary Mixtures at Different Temperatures nD

F/g‚cm-3

303.15 K

308.15 K

0.0000 0.1011 0.2067 0.3122 0.3979 0.4994 0.5973 0.6995 0.7985 0.8993 1.0000

Cyclohexane (1) + Dodecane (2) 0.7454 0.7417 0.7380 1.4207 1.4184 0.7463 0.7426 0.7389 1.4206 1.4181 0.7474 0.7436 0.7399 1.4205 1.4181 0.7489 0.7451 0.7413 1.4204 1.4180 0.7504 0.7465 0.7426 1.4202 1.4180 0.7522 0.7482 0.7443 1.4203 1.4181 0.7546 0.7505 0.7464 1.4203 1.4181 0.7575 0.7534 0.7495 1.4205 1.4182 0.7614 0.7570 0.7527 1.4208 1.4185 0.7666 0.7620 0.7575 1.4226 1.4199 0.7740 0.7692 0.7642 1.4235 1.4217

1.4163 1.4160 1.4157 1.4157 1.4156 1.4158 1.4160 1.4166 1.4168 1.4174 1.4175

0.0000 0.1061 0.2108 0.3130 0.4183 0.5198 0.6181 0.7169 0.8048 0.9071 1.0000

Cyclohexane (1) + Tridecane (2) 0.7531 0.7494 0.7457 1.4239 1.4226 0.7536 0.7499 0.7462 1.4237 1.4219 0.7543 0.7506 0.7468 1.4234 1.4215 0.7551 0.7513 0.7476 1.4233 1.4208 0.7560 0.7521 0.7483 1.4230 1.4206 0.7573 0.7533 0.7491 1.4225 1.4204 0.7590 0.7549 0.7509 1.4224 1.4201 0.7610 0.7569 0.7528 1.4226 1.4201 0.7639 0.7596 0.7553 1.4227 1.4201 0.7677 0.7633 0.7587 1.4230 1.4203 0.7740 0.7692 0.7642 1.4235 1.4217

1.4200 1.4194 1.4189 1.4183 1.4179 1.4176 1.4172 1.4172 1.4173 1.4173 1.4175

0.0000 0.1058 0.2049 0.2965 0.3993 0.4614 0.6067 0.7015 0.7992 0.9109 1.0000

Cyclohexane (1) + Tetradecane (2) 0.7596 0.7561 0.7525 1.4263 1.4248 0.7598 0.7561 0.7525 1.4261 1.4241 0.7600 0.7564 0.7526 1.4256 1.4236 0.7603 0.7568 0.7529 1.4251 1.4233 0.7607 0.7570 0.7532 1.4249 1.4231 0.7610 0.7572 0.7534 1.4243 1.4224 0.7622 0.7584 0.7545 1.4237 1.4219 0.7637 0.7596 0.7555 1.4233 1.4207 0.7655 0.7614 0.7571 1.4231 1.4205 0.7691 0.7647 0.7602 1.4224 1.4197 0.7740 0.7692 0.7642 1.4235 1.4217

1.4226 1.4222 1.4216 1.4206 1.4204 1.4198 1.4192 1.4179 1.4177 1.4173 1.4175

0.0000 0.0970 0.2040 0.3045 0.3943 0.4690 0.6004 0.6965 0.7988 0.9004 1.0000

Cyclohexane (1) + Pentadecane (2) 0.7650 0.7614 0.7579 1.4279 1.4256 0.7648 0.7612 0.7577 1.4279 1.4254 0.7647 0.7611 0.7574 1.4272 1.4249 0.7647 0.7611 0.7573 1.4257 1.4238 0.7648 0.7612 0.7574 1.4252 1.4234 0.7648 0.7610 0.7573 1.4246 1.4228 0.7654 0.7616 0.7576 1.4238 1.4213 0.7661 0.7622 0.7582 1.4233 1.4204 0.7674 0.7633 0.7590 1.4226 1.4202 0.7697 0.7652 0.7608 1.4213 1.4188 0.7740 0.7692 0.7642 1.4235 1.4217

1.4238 1.4236 1.4226 1.4218 1.4208 1.4200 1.4198 1.4183 1.4176 1.4166 1.4175

x1

298.15 K

303.15 K

308.15 K

298.15 K

Table 3. Estimated Parameters of Excess Functions for Mixtures function

temp/K

A0

A1

A2

σ

0.873 0.775 0.727 -2.610 -3.063 -3.195 -5.695 -6.768 -7.088

0.012 0.016 0.021 0.027 0.026 0.019 0.061 0.058 0.043

Cyclohexane (1) + Tridecane (2) 298.15 2.292 -1.199 0.768 VE/106(m3‚mol-1) 303.15 2.252 -1.251 0.396 308.15 2.155 -1.158 0.260 -4.261 ∆RLL/106(m3‚mol-1) 298.15 -26.44 10.87 303.15 -26.72 11.01 -5.242 308.15 -26.53 11.11 -4.568 -9.369 ∆REYK/106(m3‚mol-1) 298.15 -58.46 24.05 303.15 -59.12 24.36 -11.69 308.15 -58.64 24.62 -10.09

0.030 0.028 0.043 0.028 0.039 0.035 0.061 0.088 0.076

Cyclohexane (1) + Tetradecane (2) 298.15 2.448 -1.204 0.682 VE/106(m3‚mol-1) 303.15 2.352 -1.202 0.658 308.15 2.234 -1.020 0.729 -6.632 ∆RLL/106(m3‚mol-1) 298.15 -32.13 13.90 303.15 -32.32 13.71 -7.144 308.15 -32.27 14.05 -6.504 ∆REYK/106(m3‚mol-1) 298.15 -71.10 30.72 -14.69 303.15 -71.54 30.27 -15.90 308.15 -71.39 31.07 -14.38

0.013 0.027 0.013 0.034 0.058 0.049 0.075 0.132 0.111

Cyclohexane (1) + Pentadecane (2) 298.15 2.526 -1.182 0.834 VE/106(m3‚mol-1) 303.15 2.421 -1.043 0.977 308.15 2.348 -0.956 0.767 -9.522 ∆RLL/106(m3‚mol-1) 298.15 -38.31 17.46 303.15 -38.42 17.11 -8.978 308.15 -38.21 17.49 -9.211 ∆REYK/106(m3‚mol-1) 298.15 -84.84 38.61 -21.14 303.15 -85.08 37.76 -19.86 308.15 -84.56 38.66 -20.41

0.014 0.025 0.022 0.036 0.043 0.050 0.080 0.095 0.112

Cyclohexane (1) + Dodecane (2) 298.15 2.082 -0.927 VE/106(m3‚mol-1) 303.15 2.023 -0.959 308.15 1.923 -0.788 8.034 ∆RLL/106(m3‚mol-1) 298.15 -21.38 303.15 -21.37 7.815 308.15 -21.04 8.243 ∆REYK/106(m3‚mol-1) 298.15 -47.25 17.76 303.15 -47.21 17.24 308.15 -46.42 18.26

The results of VE and ∆R have been fitted to the Redlich-Kister equation (Redlich and Kister, 1948) to estimate the coefficients, Ai, and standard errors, σ (Aminabhavi and Bindu, 1995). These results are presented in Table 3. The results of VE versus x1 at 298.15 K given in Figure 1 are positive over the entire range of compositions. These positive VE values show a systematic increase from dodecane to pentadecane, thus exhibiting the chain length effect of alkanes on VE results. Upon comparison of equimolar VE results at 298.15 K with those of the published results of Awwad and Salman (1986) for mixtures of cyclohexane with dodecane and tetradecane, we find that our VE ) 0.530 cm3‚mol-1 for the cyclohexane + dodecane mixture is 6.7% lower than the literature VE value of 0.568 cm3‚mol-1. For the cyclohexane + tetradecane mixture, our VE ) 0.630

Figure 1. Excess molar volume vs mole fraction at 298.15 K for mixtures of cyclohexane with (O) dodecane, (4) tridecane, (0) tetradecane, and (3) pentadecane.

cm3‚mol-1 is about 2.8% higher than the published value of 0.613 cm3‚mol-1. The effect of temperature on VE shows a systematic decrease with increasing temperature. However, this dependence is not displayed graphically to avoid overcrowding of graphs.

528

Journal of Chemical and Engineering Data, Vol. 41, No. 3, 1996 in Figures 2 and 3, respectively. These results are negative and decrease systematically with an increase in chain length of n-alkanes from dodecane to pentadecane. On the other hand, the results of ∆R do not exhibit any systematic effect on temperature. However, the experimental data of density and refractive index for the present mixtures at higher temperatures are not available in the literature with which we can compare our results. Literature Cited Aminabhavi, T. M.; Bindu, G. Densities, Viscosities, and Refractive Indices of Bis(2-methylethyl) Ether + Cyclohexane or + 1,2,3,4Tetrahydronaphthalene and of 2-Ethoxyethanol + Propan-1-ol, + Propan-2-ol, or Butan-1-ol. J. Chem. Eng. Data 1995, 40, 462-467.

Figure 2. Deviations in molar refractivity (Lorentz-Lorenz) vs volume fraction at 298.15 K for the binary mixtures given in Figure 1.

Aminabhavi, T. M.; Phayde, H. T. S.; Khinnavar, R. S.; Bindu, G.; Hansen, K. C. Densities, Refractive Indices, Speeds of Sound, and Shear Viscosities of Diethylene Glycol Dimethyl Ether with Ethyl Acetate, Methyl Benzoate, Ethyl Benzoate, and Diethyl Succinate in the Temperature Range from 298.15 to 318.15 K. J. Chem. Eng. Data 1994, 39, 251-260. Aminabhavi, T. M.; Patil, V. B.; Aralaguppi, M. I.; Phayde, H. T. S. Density, Viscosity, and Refractive Index of the Binary Mixtures of Cyclohexane with Hexane, Heptane, Octane, Nonane, and Decane at (298.15, 303.15, and 308.15) K. J. Chem. Eng. Data 1996, 41, 521-525. Awwad, A. M.; Salman, M. A. Excess molar volumes and viscosities of binary mixtures of cyclohexane and n-alkanes at 298.15 K. Fluid Phase Equilib. 1986, 25, 195-208. Marquardt, D. W. An algorithm for least-squares estimation of nonlinear parameters. J. Soc. Ind. Appl. Math. 1963, 11, 431-441. Marsh, K. N. TRC Data Bases for Chemistry and EngineeringsTRC Thermodynamic Tables; Texas A & M University: College Station, TX, 1994. Redlich, O.; Kister, A. T. Algebraic representation of thermodynamic properties and the classification of solutions. Ind. Eng. Chem. 1948, 40, 345-348. Riddick, J. A.; Bunger, W. B.; Sakano, T. K. Techniques of Chemistry, Organic solvents. Physical properties and methods of purifications; John Wiley & Sons: New York, 1986; Vol. II.

Figure 3. Deviations in molar refractivity (Eykman) vs volume fraction at 298.15 K for the binary mixtures given in Figure 1.

Received for review November 2, 1995. Accepted February 2, 1996.X T.M.A., J.D.O., and K.C.H. are grateful to the Welch Foundation, Houston, TX, for partial support of this study.

JE950280B

The changes in molar refractivity at 298.15 K computed from Lorentz-Lorenz and Eykman equations are presented

X

Abstract published in Advance ACS Abstracts, March 15, 1996.