Deposition of Mercury in Forests along a Montane Elevation Gradient

Mar 30, 2015 - a 1000+ m elevation gradient in the Adirondack Mountains of. New York .... Whiteface and are included in Supporting Information (Table...
1 downloads 0 Views 886KB Size
Subscriber access provided by STEVENS INST OF TECH

Article

Deposition of mercury in forests along a montane elevation gradient Bradley D Blackwell, and Charles T. Driscoll Environ. Sci. Technol., Just Accepted Manuscript • DOI: 10.1021/es505928w • Publication Date (Web): 30 Mar 2015 Downloaded from http://pubs.acs.org on April 7, 2015

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

Environmental Science & Technology is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 35

Environmental Science & Technology

1

Deposition of mercury in forests along a montane elevation gradient

2

Bradley D. Blackwell* and Charles T. Driscoll

3 4

Department of Civil and Environmental Engineering, Syracuse University, Syracuse, NY 13244

5 6

*corresponding author

7

1

ACS Paragon Plus Environment

Environmental Science & Technology

8 9

ABSTRACT Atmospheric mercury (Hg) deposition varies along elevation gradients and is influenced

10

by both orographic and biological factors. We quantified total Hg deposition over a two year

11

period at 24 forest sites at Whiteface Mountain, NY, USA that ranged from 450-1450 m above

12

sea level and covered three distinct forest types: deciduous/hardwood forest (14.1 µg/m2-yr),

13

spruce/fir forest (33.8 µg/m2-yr), and stunted growth alpine/fir forest (44.0 µg/m2-yr).

14

Atmospheric Hg deposition increased with elevation, with the dominant deposition pathways

15

shifting from litterfall in low-elevation hardwoods to throughfall in mid-elevation spruce/fir to

16

cloud water in high-elevation alpine forest. Soil Hg concentrations (ranging from 69 to 416 ng/g

17

for the Oi/Oe and 72 to 598 ng/g for the Oa horizons) were correlated with total Hg deposition,

18

but the weakness of the correlations suggests that additional factors such as climate and tree

19

species also contribute to soil Hg accumulation. Meteorological conditions influenced Hg

20

deposition pathways, as cloud water Hg diminished in 2010 (dry conditions) compared to 2009

21

(wet conditions). However, the dry conditions in 2010 led to increased Hg dry deposition and

22

subsequent significant increases in throughfall Hg fluxes compared to 2009. These findings

23

suggest that elevation, forest characteristics, and meteorological conditions are all important

24

drivers of atmospheric Hg deposition to montane forests.

25

INTRODUCTION

26

Mercury (Hg) contamination is a major environmental issue for remote ecosystems that

27

receive elevated deposition from long-range atmospheric transport. Anthropogenic activities

28

have increased the global pool of available Hg by approximately a factor of three.1 Although Hg

29

emissions have decreased in North America and Europe, activities in Asia have resulted in

30

overall increases in global Hg emissions.1,2 Mercury deposition is difficult to estimate on a 2

ACS Paragon Plus Environment

Page 2 of 35

Page 3 of 35

Environmental Science & Technology

31

global basis because many factors can influence its land-atmosphere exchange. Land cover has

32

been shown to impact Hg deposition as forested areas enhance Hg deposition processes.3-6

33

Differences in forest type also impact Hg deposition.7-9 Additionally, geographic features such

34

as latitude, longitude, and elevation have been correlated to Hg deposition.10-12

35

Previous studies have shown that high-elevation forests receive elevated atmospheric

36

deposition of anthropogenic pollutants.13-15 Mercury concentrations in soils increase with

37

increases in elevation,16,17 and two montane areas of the northeastern United States (the

38

Adirondack and Catskill Mountains) are considered to be “biological Hg hotspots”.18 The steep

39

elevation gradients found in mountainous regions create abrupt changes in climate, which in turn

40

lead to shifts in forest communities from low-elevation hardwood forest to high-elevation conifer

41

forest. As both meteorological and biological factors influence Hg deposition, there is potential

42

for marked variability in Hg deposition processes along mountain gradients, even over relatively

43

small distances. Mountainous areas are also likely to experience more severe changes in

44

meteorological conditions driven by human-induced climate change than low-elevation areas.19

45

Mountainous areas have shallow soils, harbor sensitive plant and wildlife species, and serve as

46

recharge areas for down gradient water resources. As a result, there is a critical need to

47

characterize and quantify atmospheric deposition to montane landscapes.

48

The purpose of this study was to quantify Hg deposition over a 1000+ m elevation

49

gradient in the Adirondack Mountains of New York State, USA and to evaluate the role of

50

physical factors (precipitation quantity, solar radiation, etc.) and biological factors (forest type)

51

in Hg deposition processes. We estimated deposition through both wet and dry processes and

52

measured Hg concentrations in organic soil horizons. As this study spanned two growing

53

seasons, we also examined effects of meteorology on Hg deposition by comparing Hg deposition 3

ACS Paragon Plus Environment

Environmental Science & Technology

54

calculations from a wet, cool, predominantly overcast growing season (2009) with Hg deposition

55

calculations from a warm, dry, and predominantly sunny growing season (2010). In addition,

56

this study could serve as a baseline for monitoring both reductions in Hg emissions in North

57

America and long-term variation in Hg deposition as a result of climate change.

58

MATERIALS & METHODS

59

Study Site and Experimental Design

60

Whiteface Mountain is located in the northeast portion of the Adirondack Park near

61

Wilmington, NY (summit location 44.37°N, 73.90° W) (Figure 1). The mountain has a

62

prominence of over 1,000 meters, with a base elevation of approximately 400 m above sea level

63

and a summit elevation of 1483 m. Whiteface is home to the State University of New York

64

Atmospheric Science Research Center (ASRC) and has atmospheric monitoring stations located

65

at approximately 610 m and at the summit. There is also a monitoring site for the National

66

Atmospheric Deposition Program National Trends Network (NADP NTN) and a site for cloud-

67

chemistry monitoring operated by the NY Department of Environmental Conservation. Mercury

68

Deposition Network (MDN) stations are located approximately 50 km (Huntington Forest, NY;

69

NY20) and 80 km (Underhill, VT; VT99) from the summit of Whiteface.

70

Forest communities of Whiteface Mountain are segregated into three distinct zones with

71

small transition zones between. Lower elevations (hardwood zone) are characterized by northern

72

hardwood forest dominated by sugar maple (Acer saccharum), yellow birch (Betula

73

alleghaniensis), red maple (Acer rubrum), and American beech (Fagus grandifolia) and range

74

from 400 m to approximately 900 m. Canopy heights in the hardwood forest range from 10-20

75

m on average, and the understory is relatively open. Mid-elevations (spruce/fir zone) are thick

76

stands of balsam fir (Abies balsamea) and red spruce (Picea rubens) with interspersed paper 4

ACS Paragon Plus Environment

Page 4 of 35

Page 5 of 35

Environmental Science & Technology

77

birch (Betula papyrifera) and range from approximately 1000 m to 1300 m. The canopy heights

78

of the mid-elevations ranges from 5-10 m, and the understory ranges from open to extremely

79

dense growths of young evergreens. The third zone is an alpine forest zone that is comprised

80

almost entirely of sparse, stunted-growth balsam fir with occasional red spruce, paper birch, and

81

mountain ash (Sorbus americana). The alpine zone ranges from approximately 1350 m to the

82

summit. The canopy height in this area rarely exceeds 2 m, and much of the “canopy” is less

83

than 1 m in height. This study was designed to estimate atmospheric Hg deposition along the entire elevation

84 85

gradient of Whiteface Mountain. This goal was accomplished by establishing transects along

86

both the southwest and northeast sides of Whiteface (Figure 1). Each transect contained 12 study

87

plots that spanned a range of elevations and forest types. For both transects, four plots were

88

established at regular elevation intervals in each of the three major vegetation zones (hardwood,

89

spruce/fir, alpine). Samples were collected from the transects between 1 June 2009 and 6 June

90

2011.

91

Sample and Data Collection

92

After selecting plots, we recorded latitude and longitude using a handheld global

93

positioning system (GPS). Elevation was estimated using a combination of topographic maps,

94

handheld GPS, and a digital elevation model of the Adirondack Park. Throughfall collectors

95

were installed at each site, and throughfall was collected every 10-30 days during the growing

96

season. Green canopy foliage was collected from high canopy trees in late September of both

97

2009 and 2010. Senesced litter was collected in plastic crates at each site throughout the year.

98

Organic soil samples were collected from each plot. Two subsamples were taken from the

99

horizons of each soil core. The Oi and Oe horizons, which are made up of slightly to 5

ACS Paragon Plus Environment

Environmental Science & Technology

Page 6 of 35

100

intermediately decomposed leaf litter and organic matter, were combined into a single sample.

101

The Oa horizon, made up of highly decomposed organic matter, was also collected.

102

addition, a cloud water collector was installed at the summit to estimate deposition via cloud

103

water. Detailed information about the methods used to collect samples can be found in the

104

supporting information.

105

In

Meteorological data, which included air temperature, wind speed, cloud frequency, and

106

precipitation quantity, were measured at the summit of Whiteface and are included in the

107

supporting information (Table S1).

108

Laboratory Analysis

109

All solid samples (foliage, litter, soil) were freeze dried for at least 72 hours to remove

110

moisture and were then analyzed for total Hg using EPA Method 7473

111

(http://www.epa.gov/osw/hazard/testmethods/sw846/pdfs/7473.pdf). A subsample of solid

112

samples was also analyzed for total carbon and total nitrogen content. Aqueous samples

113

(throughfall, cloud water) were fixed with hydrochloric acid and stored at 4° C before analysis

114

for total Hg using EPA Method 1631e

115

(http://water.epa.gov/scitech/methods/cwa/metals/mercury/upload/2007_07_10_methods_metho

116

d_mercury_1631.pdf). Throughfall samples collected in 2010 were also analyzed for NO3-,

117

SO42-, and dissolved organic carbon (DOC). Detailed information on laboratory analysis,

118

including quality control, is included in the supporting information.

119

Deposition calculations

120

Sampling years were designated as beginning June 1 of each year to simplify flux

121

calculations. Sampling year 2009 was defined as 1 June 2009 to 31 May 2010, and sampling

122

year 2010 was defined as 1 June 2010 to 31 May 2011. Throughfall Hg fluxes were calculated 6

ACS Paragon Plus Environment

Page 7 of 35

Environmental Science & Technology

123

by multiplying throughfall concentrations by throughfall quantities. During the growing season,

124

both components were measured directly at each plot. For periods when samples were not

125

collected directly, wet Hg deposition was estimated at each plot using the NTN and MDN data

126

and multiplying those data by the average precipitation and Hg enrichment factors for each plot.

127

Please see the supporting information for further explanation of this method.

128

Litterfall Hg fluxes were calculated by multiplying litterfall mass per unit area by foliar

129

Hg concentrations. Cloud fluxes were estimated by multiplying mean measured cloud Hg

130

concentrations with a modified cloud water quantity model for Whiteface Mountain outlined in

131

Miller et al.14 This model was optimized specifically for Whiteface Mountain and predicts annual

132

cloud water quantity at different elevations. Mercury deposition fluxes were calculated for

133

litterfall, throughfall, and cloud water at each plot. These deposition pathways were assumed to

134

be independent of each other, and total Hg fluxes were assumed to be the sum of the three

135

components. Deposition of Hg in each forest zone was estimated by averaging calculated fluxes

136

from all eight plots within each zone. Refer to supporting information for more detailed

137

explanations of calculation of deposition estimates.

138

Statistical Analysis

139

Regression analysis was used to examine patterns in elevation with measured chemistry

140

variables and estimated Hg deposition. One-way ANOVA was used to determine statistically-

141

significant differences among the different forest zones. Data that were not normally distributed

142

were log-transformed before analysis. Statistical significance was defined at α < 0.05. All data

143

analysis was performed using IBM SPSS Statistics 19.0.

144

RESULTS

145

Meteorological Variables 7

ACS Paragon Plus Environment

Environmental Science & Technology

146

Weather patterns in 2009 were markedly different from weather patterns in 2010, as 2009

147

was generally cool and overcast with regular rain showers, while 2010 was warmer with less

148

cloud cover and precipitation. A substantially greater proportion of the rainfall in 2010 was the

149

result of storm events. Although it was not possible to collect meteorological data at each site,

150

data was collected at the summit and is summarized in Table S1 of the supporting information.

151

Throughfall and Cloud Hg Concentrations

152

Concentrations of Hg in throughfall varied among the different forest types, with the

153

lowest concentrations found in the alpine zone and highest concentrations found in the spruce/fir

154

zone (Figure 2). Results of one-way ANOVA of log-transformed throughfall Hg concentrations

155

indicate that the differences among forest types were significant (F(2,140) = 10.3, p