Design and Synthesis of an Easily Obtainable Maleimide Reagent N

Dec 9, 2016 - *E-mail: [email protected]. ... The advantage of the design is that the precursor and [18F]FBSEM have the same backbone and backb...
0 downloads 0 Views 1MB Size
Subscriber access provided by Fudan University

Article

Design and Synthesis of an Easily Obtainable Maleimide Reagent N-[2-(4-[ F]fluoro-N-methylbenzenesulfonamido)ethyl]maleimide ([ F]FBSEM) to Radiolabel Thiols in Proteins 18

18

Yuji Fujita, Yoshihiro Murakami, Akihiro Noda, and Sosuke Miyoshi Bioconjugate Chem., Just Accepted Manuscript • DOI: 10.1021/acs.bioconjchem.6b00707 • Publication Date (Web): 09 Dec 2016 Downloaded from http://pubs.acs.org on December 14, 2016

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

Bioconjugate Chemistry is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 26

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Bioconjugate Chemistry

Design and Synthesis of an Easily Obtainable 18 N-[2-(4-[ F]fluoro-N-methylbenzenesulfonamido)ethyl]maleimide Radiolabel Thiols in Proteins

Yuji Fujita*, Yoshihiro Murakami, Akihiro Noda, Sosuke Miyoshi Drug Discovery Research, Astellas Pharma Inc., Tsukuba, Japan

*Corresponding author: Yuji Fujita Astellas Pharma Inc. 21 Miyukigaoka, Tsukuba, Ibaraki, Japan, 305-8585 e-mail: [email protected] Phone: +81-29-829-6482 Fax: +81-29-854-1879

ACS Paragon Plus Environment

Maleimide Reagent 18 ([ F]FBSEM) to

Bioconjugate Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 26

ABSTRACT: An

easily

obtainable

thiol-selective

labeling

[18F]FBSEM

reagent

(N-[2-(4-[18F]fluoro-N-metheylbenzenesulfonamido)ethyl]maleimide) was developed. The advantage of the design is that the precursor and [18F]FBSEM have the same backbone and backbone construction is not required; in contrast, known thiol-specific labeling reagents do require backbone construction, and this is thought to be the cause of their complicated synthesis. [18F]FBSEM was successfully obtained in higher yield (25%) and in a simpler way (2 fluorination and deprotection steps in 65 min) than the widely used [18F]FBEM (N-[2-(4-[18F]fluorobenzamide)ethyl]maleimide). The labeling efficacy of [18F]FBSEM was confirmed by conjugation with glutathione. [18F]FBSEM is a promising labeling agent for proteins.

INTRODUCTION: PET (positron emission tomography), a useful imaging technique with the ability to noninvasively detect radiolabeled molecules, is used as a tool in drug discovery and development in pharmacokinetic studies,1 pharmacodynamic studies,2 and evaluation of drug efficacy.3 The number of biopharmaceuticals, such as antibodies, is now increasing.4 The advantage of biopharmaceuticals is their high target specificity. Given that the outcome of therapy in some patients depends on target expression status, the ability to image the target is useful in patient stratification in both drug discovery and development and in clinical treatment.5 PET can play a major role in this trend, thanks to its high sensitivity, adequate resolution, and high quantitative capability. Among PET nuclides, 18F is often used for radiolabeling proteins due to its moderate half-life (109.77min). The most common way to incorporate 18F into proteins is the use of prosthetic groups labeled with 18F, because direct introduction of 18

F requires harsh conditions under which proteins are not stable.6

18

F is first introduced into reactive prosthetic

groups and then the prosthetic groups are conjugated with proteins. These prosthetic groups react with proteins in two major ways, by reaction with the amino group of a lysine residue or with the thiol group of a cysteine residue. The acylating reagent [18F]SFB is widely used as a prosthetic group in reagents used for labeling lysine residues.6 It reacts randomly with amino groups at lysines, and the radiochemical yield of labeling is not usually high.

In

contrast,

maleimide-type

prosthetic

groups

such

as

[18F]FBEM

(N-[2-(4-[18F]fluorobenzamide)ethyl]maleimide) can be introduced site-specifically at the thiol group of a cysteine residue with relatively high yield. The first reported maleimide reagents for labeling thiols by

ACS Paragon Plus Environment

18

F are

Page 3 of 26

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Bioconjugate Chemistry

[18F]FPPD and [18F]DDPFB, reported by Shiue et al.7 Many other labeling reagents have been reported since then ,8-17 among which the most widely used is [18F]FBEM, 5, 18-25 reported by Cai et al.12 However, the synthesis of [18F]FBEM is complicated and time-consuming. The original method involves the synthesis of [18F]SFB as an intermediate, and is both slow and has low radiochemical yield.12 Several improved methods with higher yield have since been reported, but they are still complicated.26-28 In our laboratory, [18F]FBEM is obtained by an original modified method and has an average radiochemical yield of 17% in 94 min (Scheme 1). Although [18F]FBEM is useful for labeling proteins, synthesis is a complicated operation which requires many reagents and a long synthesis time. Here, therefore, we developed a novel maleimide reagent that can be easily obtained, and confirmed its reactivity with thiols.

Scheme 1. Synthetic route for [18F]FBEM.

Synthesis of these maleimide reagents involves construction of backbone; that is, the fluorinated moiety and maleimide moiety are linked after fluorination (Figure 1A). In the case of [18F]FBEM, fluorobenzoic acid is reacted with amine to construct the backbone. Considering this to be the cause of the complicated synthesis, we designed a novel maleimide reagent whose precursor has the same backbone as the labeling reagent (Figure 1B). It was desirable to obtain a labeling reagent with a single-step fluorination reaction, but this was not possible due to the instability of maleimide under typical nucleophilic radiofluorination conditions.11, 14, 17 Thus, the maleimide moiety of the precursor was protected and fluorination was followed by a deprotection step. The designed compound was [18F]FBSEM (N-[2-(4-[18F]fluoro-N-metheylbenzenesulfonamido)ethyl]maleimide) and the assumed synthetic route is shown in Scheme 2. The precursor has a fluorination moiety which is activated with sulfonamide and a maleimide moiety which is protected with an easily removable protective group.

18

F is

introduced in a benzene ring, so it is metabolically stable against delfuorination, as is the case with [18F]FBEM.

ACS Paragon Plus Environment

Bioconjugate Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Here we report the synthesis of [18F]FBSEM and confirmation of its reactivity with thiols using glutathione as a model substrate.

Figure 1. Synthetic strategy of maleimide reagent: (A) reported method; (B) our original method.

Scheme 2. Designed compound and planned synthetic route.

RESULTS AND DISCUSSION: Synthetic routes for standard FBSEM and the precursor of [18F]FBSEM are shown in Scheme 3. Maleic anhydride 1 was protected via the Diels-Alder reaction to afford 2,29 which was reacted with t-butyl(2-aminoethyl)carbamate to form 3. Removal of the Boc group with HCl, sulfonamidation with sulfonylchloride, and methylation with CH3I afforded 6a-b. FBSEM (7) was obtained from 6a via the retro-Diels-Alder reaction. Reduction of the nitro group of 6b, followed by dimethylation with CH3I and treatment with CH3OTf gave the precursor of [18F]FBSEM (10).

ACS Paragon Plus Environment

Page 4 of 26

Page 5 of 26

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Bioconjugate Chemistry

Scheme 3a. Synthetic route for FBSEM and the precursor of [18F]FBSEM.

a

Reagents and conditions (a) benzene, rt, 63 h, 76%; (b) t-butyl(2-aminoethyl)carbamate, MeOH, reflux 10 h and

rt 2 days, 59%; (c) EtOAc, 4M HCl/EtOAc, rt, 5 h, 99%; (d) R-Ph-SO2Cl, Et3N, CH2Cl2, 0 °C-rt, 7-15 h, 99% (5a), 91% (5b); (e) K2CO3, CH3I, DMF, rt, 15 h, 76% (6a), 94% (6b); (f) anisole, 150 °C, 8 h, 84%; (g) Fe, NH4Cl, EtOH/H2O, 110 °C, 0.5 h, 90%; (h) K2CO3, CH3I, DMF, 70 °C, 4h, 37%; (i) CH3OTf, CH2Cl2, rt, 24 h, 82%

The primary synthetic route of [18F]FBSEM (Method A) is shown in Scheme 4A. The precursor was fluorinated and the reaction mixture was purified by HPLC. Solid phase extraction was performed and the fluorinated product [18F]6a was collected in a second reaction vessel and concentrated. After deprotection in xylene and subsequent concentration, [18F]FBSEM was obtained as an Et2O solution without further purification (decay-corrected radiochemical yield: 5.1%, radiochemical purity: 45%, synthesis time: 99 min). However, there were two problems. First, a byproduct was observed after deprotection and thus radiochemical purity was very low. Second, although the number of reaction steps was only two, the reaction was performed in two reaction vessels and the operation was complicated. Synthesis time was even longer than that of [18F]FBEM. As for the byproduct, collected [18F]FBSEM solution was analyzed by LC-MS and the structure of the byproduct was estimated. The obtained mass spectrum and the fact that the byproduct did not react with a thiol group indicated that the byproduct was an adduct of maleimide and that xylene used as solvent (Figure 2). As the byproduct was

ACS Paragon Plus Environment

Bioconjugate Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

not observed in cold reaction, it was estimated to be formed via radiolysis. Considering the relatively high stability of benzyl radicals, we supposed that the benzyl radical was generated from xylene and reacted with maleimide. Therefore, the solvent used in the deprotection reaction was changed to anisole, which does not have a benzyl position. Radiochemical purity was then extensively raised to 92%. Furthermore, by changing the solvent of fluorination to CH3CN, which can be concentrated as the boiling point is relatively low, synthesis was performed with a one-pot reaction followed by HPLC purification and solid phase extraction. As maleimide is not stable under heating in radiofluorination conditions, MsOH was used for acidification before deprotection by the retro-Diels-Alder reaction. By these modifications, radiochemical purity was raised to >99% and synthesis time was slightly shortened. However, the operation was still complicated and the synthesis time was not sufficiently decreased. This was due to the two concentration steps, so the synthetic route was further changed to remove the concentration steps. The modified final version of the synthetic route (Method B) is shown in Scheme 4B. The solvent of the fluorination reaction was changed to DMSO to allow deprotection at a high temperature without changing the solvent, and fluorination temperature was raised. The deprotection temperature was also raised to 170 °C (measured with a thermocouple set outside the reaction vessel) to shorten the reaction time. In our test runs, setting of the reaction temperature in the deprotection reaction was important. When the temperature was not high enough, the proportion of protected compound was high, whereas a temperature which was too high resulted in the generation of a byproduct. In the modified process, fluorination, deprotection with the addition of MsOH, HPLC purification, and solid phase extraction afforded [18F]FBSEM as a CH2Cl2 solution using automated synthesis apparatus (irradiation time: 30 min, radioactivity: 136.9 mCi, decay-corrected radiochemical yield: 25%, radiochemical purity: >99%, specific activity: 2.1 Ci/µmol, synthesis time: 65 min). In the process of solid phase extraction with a reversed-phase cartridge, CH2Cl2, CH3CN, and Et2O were tested as an eluting solvent. CH2Cl2 and CH3CN showed a higher collection rate of [18F]FBSEM (>90%) than Et2O. In view of the time required for concentration of the organic solvent before conjugation with thiols, CH2Cl2 was chosen as an eluent.

ACS Paragon Plus Environment

Page 6 of 26

Page 7 of 26

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Bioconjugate Chemistry

Scheme 4. Synthetic route of [18F]FBSEM: (A) primary route; (B) modified route.

Figure 2. Estimated structure of a byproduct.

A comparison of the synthesis of [18F]FBEM and [18F]FBSEM is shown in Table 1. With the same irradiation time, we could obtain [18F]FBSEM with more radioactivity, higher radiochemical yield, shorter synthesis time, and fewer reagents and solid phase cartridges (cartridges used for F- collection, solid phase extraction, and anhydration) in the automated synthesis apparatus than [18F]FBEM. Synthesis time of 65 min includes 22 min for collection of F- from the cyclotron and azeotropic drying, so the time needed from fluorination through collection of [18F]FBSEM is about only 40 min. Thus, by designing [18F]FBSEM and its precursor with the same backbone, we successfully obtained [18F]FBSEM while overcoming the problems with the synthesis of [18F]FBEM. Table 1. Comparison of the synthesis of [18F]FBEM and [18F]FBSEMa [18F]FBEMb [18F]FBSEM

a

Radioactivity

70.5 mCic

136.9 mCid

Radiochemical yielde

17%

25%

Specific activity

-f

2.1 Ci/µmolg

Radiochemical purity

-f

>99%

Synthesis timeh

94 min

65 min

Reagents and cartridges

19

12

Data for 30 min irradiation. b Average (n=3). c At 15-17 min after SPE elution (radioactivity was measured after

ACS Paragon Plus Environment

Bioconjugate Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

concentration). d At the end of synthesis (just after SPE elution). e Decay-corrected (calculated from [18F]F-). f Not measured. g At the end of synthesis. h Including 22 min for collection of F- and azeotropic drying.

Obtained [18F]FBSEM was conjugated with glutathione (GSH) as a model substrate to confirm its reactivity with thiols (Scheme 5). [18F]FBSEM was reacted with glutathione (1 mg/mL in PBS) at room temperature for 30 min. [18F]FBSEM was completely consumed and radiochemical purity of [18F]FBSEM-GSH was almost 90%, which showed its high reactivity with thiols like [18F]FBEM, as expected. Scheme 5. Conjugation of [18F]FBSEM with glutathione.

CONCLUSION: We have designed a novel maleimide reagent [18F]FBSEM, which can be prepared easily by an original synthetic strategy. [18F]FBSEM was obtained with fewer reagents, simpler operation, and a shorter synthesis time than [18F]FBEM, which is a widely used maleimide reagent for labeling thiols. The obtained radioactivity and radiochemical yield of [18F]FBSEM was high and its reactivity with thiols was confirmed by conjugation with glutathione. [18F]FBSEM is promising as a labeling agent for proteins such as antibodies. An in vivo preclinical PET imaging study is underway.

EXPERIMENTAL PROCEDURES General Procedures. All reagents and solvents were purchased and used as received, unless otherwise noted. 1

H-NMR spectra were recorded with a Varian UNITY spectrometer (Varian Inc., Palo Alto, CA, USA) or an

AV-III HD 500 spectrometer (Bruker Biospin K.K., Yokohama, Japan). 13C-NMR spectra were recorded with a

ACS Paragon Plus Environment

Page 8 of 26

Page 9 of 26

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Bioconjugate Chemistry

AV-III HD 500 spectrometer. Chemical shifts are expressed in δ units using tetramethylsilane as the internal standard. Mass spectral data were obtained using a liquid chromatography-mass spectrometer (LC-MS) method with a UPLC/SQD LC-MS system (Nihon Waters K.K., Tokyo, Japan). HRMS data were obtained using a LC-MS method with a LCT Premier (Nihon Waters K.K., Tokyo, Japan) or an Exactive Plus (Thermo Fisher Scientific K.K., Tokyo, Japan). Lyophilization was performed with a DC401 (Yamato Scientific Co., Ltd., Tokyo, Japan). Chemistry.

N-[2-(1,3-dioxo-1,3,3a,4,7,7a-hexahydro-2H-4,7-epoxyisoindol-2-yl)ethyl]-4-fluorobenzenesulfonamide (5a). To a suspension of 4 (798 mg, 3.26 mmol) in CH2Cl2 (16 mL) was added Et3N (1.00 mL, 7.17 mmol). The solution was cooled on ice and 4-fluorobenzenesulfonylchloride (702 mg, 3.61 mmol) was added. The mixture was stirred at room temperature for 15 h and NaHCO3aq was added. The solution was extracted with CH2Cl2. The organic layer was dried over MgSO4 and concentrated. The residue was triturated with Et2O. The precipitate was collected to afford 5a (1.18 g, 3.22 mmol, 99% yield) as a colorless solid. 1H NMR (400 MHz, (CD3)2SO): δ 7.87 (1H, t, J = 6.3 Hz), 7.82 (2H, dd, J = 8.9, 5.2 Hz), 7.44 (2H, dd, J = 8.9, 8.9 Hz), 6.54 (2H, dd, J = 0.9, 0.9 Hz), 5.10 (2H, dd, J = 0.9, 0.9 Hz), 3.37-3.40 (2H, m), 2.89 (2H, s), 2.83-2.88 (2H, m).

13

C NMR (125 MHz,

dioxane-d8): δ 176.8, 165.5 (d, J = 251.5 Hz), 138.3 (d, J = 3.0 Hz), 137.2, 130.4 (d, J = 9.3 Hz), 116.7 (d, J = 22.6 Hz), 81.4, 48.1, 40.6, 38.7. MS (ESI+): 367.1 [M+H]+, 389.1 [M+Na]+. HRMS (ESI): Calcd for C16H16O5N2FS, 367.0758 [M+H]+, found 367.0755.

N-[2-(1,3-dioxo-1,3,3a,4,7,7a-hexahydro-2H-4,7-epoxyisoindol-2-yl)ethyl]-4-nitrobenzenesulfonamide (5b). To a suspension of 4 (2.05 g, 8.36 mmol) in CH2Cl2 (41 mL) was added Et3N (2.55 mL, 18.3 mmol). The solution was cooled on ice and 4-nitrobenzenesulfonylchloride (2.06 g, 9.31 mmol) was added. The mixture was stirred at 0 °C for 0.5 h and at room temperature for 6.5 h. The precipitate was collected by filtration and washed with CHCl3 to afford 5b (1.92 g, 4.87 mmol, 58% yield) as a colorless solid. The filtrate was concentrated and the residue was triturated with CHCl3. The precipitate was collected to afford additional 5b (1.08 g, 2.75 mmol, 33% yield). 1H NMR (400 MHz, (CD3)2SO): δ 8.42 (2H, d, J = 8.9 Hz), 8.23 (1H, t, J = 6.2 Hz), 8.02 (2H, d, J = 8.9 Hz), 6.54 (2H, br s), 5.10 (2H, br s), 3.38-3.42 (2H, m), 2.91-2.96 (2H, m), 2.90 (2H, s). 13C NMR (125 MHz, dioxane-d8): δ 176.8, 151.1, 147.3, 137.2, 128.6, 125.0, 81.4, 48.1, 40.7, 38.6. MS (ESI+): 416.1 [M+Na]+. HRMS (ESI): Calcd for C16H16O7N3S, 394.0709 [M+H]+, found 394.0700.

ACS Paragon Plus Environment

Bioconjugate Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

N-[2-(1,3-dioxo-1,3,3a,4,7,7a-hexahydro-2H-4,7-epoxyisoindol-2-yl)ethyl]-4-fluoro-N-methylbenzenesulfona mide (6a). To a solution of 5a (798 mg, 2.18 mmol) and K2CO3 (910 mg, 6.58 mmol) in DMF (16 mL) was added CH3I (273 µL, 4.38 mmol) and the mixture was stirred at room temperature for 15 h. H2O was added and the precipitate was collected by filtration. The collected solid was dried at 60 °C under vacuum to afford 6a (630 mg, 1.66 mmol, 76% yield). 1H NMR (500 MHz, (CD3)2SO): δ 7.80 (2H, dd, J = 8.9, 5.2 Hz), 7.46 (2H, dd, J = 8.9, 8.9 Hz), 6.55 (2H, br), 5.14 (2H, br), 3.53 (2H, t, J = 6.2 Hz), 3.11 (2H, t, J = 6.2 Hz), 2.94 (2H, s), 2.71 (3H, s). 13C NMR (125 MHz, (CD3)2SO): δ 176.7, 164.9 (d, J = 251.7 Hz), 136.9, 134.2 (d, J = 3.0 Hz), 130.5 (d, J = 9.7 Hz), 117.1 (d, J = 22.6 Hz), 80.8, 47.7, 47.1, 36.4, 35.3. MS (ESI+): 381.2 [M+H]+, 403.2 [M+Na]+. HRMS (ESI): Calcd for C17H18O5N2FS, 381.0915 [M+H]+, found 381.0915.

N-[2-(1,3-dioxo-1,3,3a,4,7,7a-hexahydro-2H-4,7-epoxyisoindol-2-yl)ethyl]-N-methyl-4-nitrobenzenesulfona mide (6b). To a solution of 5b (2.73 g, 6.94 mmol) and K2CO3 (1.93 g, 14.0 mmol) in DMF (55 mL) was added CH3I (650 µL, 10.4 mmol) and the mixture was stirred at room temperature for 15 h. H2O was added and the precipitate was collected by filtration. The collected solid was dried at 60 °C under vacuum to afford 6b (2.65 g, 6.51 mmol, 94% yield) as a colorless solid. 1H NMR (500 MHz, (CD3)2SO): δ 8.41 (2H, d, J = 8.9 Hz), 8.00 (2H, d, J = 8.9 Hz), 6.55 (2H, br), 5.14 (2H, br), 3.55 (2H, t, J = 6.1 Hz), 3.18 (2H, t, J = 6.1 Hz), 2.95 (2H, s), 2.77 (3H, s). 13C NMR (125 MHz, (CD3)2SO): δ 176.1, 149.8, 142.8, 136.3, 128.4, 124.6, 80.2, 47.0, 46.6, 35.8, 34.7. MS (ESI+): 408.2 [M+H]+, 430.1 [M+Na]+. HRMS (ESI): Calcd for C17H18O7N3S, 408.0860 [M+H]+, found 408.0855.

N-[2-(2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)ethyl]-4-fluoro-N-methylbenzenesulfonamide (N-[2-(4-fluoro-N-methylbenzenesulfonamido)ethyl]maleimide, 7, FBSEM). A solution of 6a (28.8 mg, 75.7 µmol) in anisole (20 mL) was stirred at 150 °C for 8h. The solution was concentrated and purified by silica gel column chromatography (hexane/EtOAc = 100/0-50/50) to afford 7 (19.9 mg, 63.7 µmol, 84% yield) as a colorless solid. 1H NMR (400 MHz, (CD3)2SO): δ 7.77 (2H, dd, J = 8.9, 5.1 Hz), 7.44 (2H, dd, J = 8.9, 8.9 Hz), 7.04 (2H, s), 3.58 (2H, t, J = 5.7 Hz), 3.14 (2H, t, J = 5.7 Hz), 2.72 (3H, s). 13C NMR (125 MHz, (CD3)2SO): δ 170.7, 164.3 (d, J = 251.4 Hz), 134.5, 133.7 (d, J = 3.1 Hz), 129.8 (d, J = 9.6 Hz), 116.5 (d, J = 22.6 Hz), 47.4, 34.6, 34.3. MS (ESI+): 313.0 [M+H]+, 335.0 [M+Na]+. HRMS (ESI): Calcd for C13H14O4N2FS, 313.0653 [M+H]+, found 313.0650. 4-amino-N-[2-(1,3-dioxo-1,3,3a,4,7,7a-hexahydro-2H-4,7-epoxyisoindol-2-yl)ethyl]-N-methylbenzenesulfon

ACS Paragon Plus Environment

Page 10 of 26

Page 11 of 26

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Bioconjugate Chemistry

amide (8). A suspension of 6b (1.30 g, 3.19 mmol), Fe (574 mg, 10.3 mmol), and NH4Cl (414 mg, 7.74 mmol) in EtOH (13 mL) and H2O (4.0 mL) was stirred at 110 °C for 0.5 h. The mixture was cooled to room temperature and filtered through Celite, which was washed with CHCl3. NaHCO3aq was added to the filtrate and the solution was extracted with CHCl3. The organic layer was dried over MgSO4 and concentrated. The residue was triturated with Et2O and the precipitate was collected to afford 8 (1.09 g, 2.88 mmol, 90% yield) as a colorless solid. 1H NMR (400 MHz, (CD3)2SO): δ 7.33 (2H, d, J = 8.7 Hz), 6.62 (2H, d, J = 8.7 Hz), 6.54 (2H, dd, J = 0.9, 0.9 Hz), 6.02 (2H, s), 5.13 (2H, dd, J = 0.9, 0.9 Hz), 3.49 (2H, t, J = 6.3 Hz), 2.97 (2H, t, J = 6.3 Hz), 2.92 (2H, s), 2.61 (3H, s). 13C NMR (125 MHz, (CD3)2SO): δ 176.1, 152.9, 136.3, 128.9, 121.5, 112.7, 80.2, 47.1, 46.5, 35.9, 34.8. MS (ESI+): 378.3 [M+H]+. HRMS (ESI): Calcd for C17H20O5N3S, 378.1118 [M+H]+, found 378.1115. 4-(dimethylamino)-N-[2-(1,3-dioxo-1,3,3a,4,7,7a-hexahydro-2H-4,7-epoxyisoindol-2-yl)ethyl]-N-methylbenz enesulfonamide (9). To a solution of 8 (400 mg, 1.06 mmol) and K2CO3 (738 mg, 5.34 mmol) in DMF (20 mL) was added MeI (1.30 mL, 20.8 mmol) and the mixture was stirred at 70 °C for 4 h. Water was added and the solution was extracted with EtOAc. The organic layer was washed with brine, dried over MgSO4, and concentrated. The residue was purified by silica gel column chromatography (CHCl3/MeOH = 100/0-100/1) and the eluate was concentrated. The residue was triturated with Et2O and the precipitate was collected by filtration to afford 9 (159 mg, 0.393 mmol, 37% yield) as a colorless solid. 1H NMR (500 MHz, CDCl3): δ 7.57 (2H, d, J = 9.1 Hz), 6.66 (2H, d, J = 9.1 Hz), 6.51 (2H, dd, J = 0.9, 0.9 Hz), 5.27 (2H, dd, J = 0.9, 0.9 Hz), 3,64 (2H, t, J = 5.8 Hz), 3.14 (2H, t, J = 5.8 Hz), 3.03 (6H, s), 2.95 (2H, s), 2.78 (3H, s).

13

C NMR (125 MHz, dioxane-d8):

δ 176.7, 153.5, 137.1, 129.5, 125.1, 111.6, 81.3, 48.1, 47.6, 39.9, 36.3, 35.0. MS (ESI+): 406.3 [M+H]+. HRMS (ESI): Calcd for C19H24O5N3S, 406.1431 [M+H]+, found 406.1429. 4-{[2-(1,3-dioxo-1,3,3a,4,7,7a-hexahydro-2H-4,7-epoxyisoindol-2-yl)ethyl](methyl)sulfamoyl}-N,N,N-trimet hylanilinium trifluoromethanesulfonate (10). To a solution of 9 (122 mg, 0.300 mmol) in CH2Cl2 (5.0 mL) was added MeOTf (36.2 µL, 0.330 mmol) and the mixture was stirred at room temperature for 24 h. Et2O was added and the precipitate was collected by filtration and washed with Et2O to afford 10 (140 mg, 0.246 mmol, 82%) as a colorless solid. 1H NMR (400 MHz, (CD3)2SO): δ 8.20 (2H, d, J = 9.2 Hz), 7.99 (2H, d, J = 9.2 Hz), 6.55 (2H, br), 5.14 (2H, br), 3.64 (9H, s), 3.56 (2H, t, J = 6.1 Hz), 3.17 (2H, t, J = 6.1 Hz), 2.94 (2H, s), 2.77 (3H, s). 13C NMR (125 MHz, (CD3)2SO): δ 176.1, 150.0, 139.0, 136.4, 128.6, 122.2, 120.6 (q, J = 322.4 Hz), 80.2, 56.3, 47.1, 46.6, 35.8, 34.8. MS (ESI+): 420.3 [M]+. HRMS (ESI): Calcd for C20H26O5N3S, 420.1588 [M]+, found 420.1586.

ACS Paragon Plus Environment

Bioconjugate Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 12 of 26

FBSEM-GSH (Conjugation of FBSEM (7) with glutathione). To a solution of glutathione (40.1 mg, 130 µmol) in PBS (500 µL) was added a solution of 7 (44.1 mg, 141 µmol) in CH3CN (500 µL) and the mixture was stirred at room temperature for 1 h. The solution was concentrated and purified by reversed-phase liquid chromatography (H2O/CH3CN = 80/20-70/30). The fraction containing FBSEM-GSH was collected, concentrated, and lyophilized to afford FBSEM-GSH (34.8mg, 56.2 µmol, 43% yield, a mixture of diastereomers) as a colorless solid. 1H NMR (500 MHz, CD3OD): δ 7.82 (2H, d, J = 8.9 Hz), 7.81 (2H, d, J = 8.6 Hz), 7.33 (2H, d, J = 8.6 Hz), 7.32 (2H, d, J = 8.9 Hz), 4.69-4.75 (2H, m), 4.03-4.08 (2H, m), 3.92 (2H, s), 3.91 (2H, s), 3.65-3.74 (6H, m), 3.44 (1H, dd, J = 14.1 Hz, 5.2 Hz), 3.16-3.29 (8H, m), 2.97 (1H, dd, J = 14.1 Hz, 8.9 Hz), 2.81 (6H, s), 2.53-2.61 (6H, m), 2.09-2.19 (4H, m). MS (ESI+): 620.3 [M+H]+, 642.3 [M+Na]+, 618.4 [M-H]-. HRMS (ESI): Calcd for C23H31O10N5FS2, 620.1491 [M+H]+, found 620.1491. Radiochemistry. No-carrier-added aqueous [18F]fluoride ion was produced by the

18

O(p, n)18F nuclear reaction

(30 µA) using a Cyclone 18/9 cyclotron (IBA, Louvain-La-Neuve, Belgium). Radiosynthesis was performed in an automated synthesis apparatus (Dainippon Seiki Co., Ltd., Kyoto, Japan). Purification of the reaction mixture by reversed-phase HPLC in radiosynthesis was performed using a YMC-Pack Pro C18 10×250 mm column (YMC Co., Ltd., Kyoto, Japan). Analytical chromatography was performed with an Agilent 6460 LC-MS system (Agilent Technologies Japan, Tokyo) and an Aloka positron detector RLC-700 (Aloka, Tokyo, Japan) using a YMC-Pack Pro C18 4.6×150 mm column (YMC Co., Ltd., Kyoto, Japan), eluted with 0.05 M NH4OAc-0.1% AcOH/CH3CN (60/40, 60/40-5/95, or 95/5-5/95) at 1.0 mL/min.

N-[2-(2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)ethyl]-4-[18F]fluorobenzamide (N-[2-(4-[18F]fluorobenzamide)ethyl]maleimide, [18F]FBEM). Aqueous [18F]fluoride ion was passed through a Sep-Pak Light Waters Accell Plus QMA Cartridge (Nihon Waters K.K., Tokyo, Japan) and eluted with a solution of K2CO3 (2.7 mg/mL in H2O, 1.0 mL) and Kryptofix 222 (20 mg/mL in CH3CN, 1.0 mL) into a reaction vessel. The solvent was evaporated under a stream of N2 at 140 °C. CH3CN (1.0 mL) was added and the solvent was evaporated at 140 °C. Again CH3CN (1.0 mL) was added and the solvent was evaporated at 120 °C. To the residue was added a solution of 4-(ethoxycarbonyl)-N,N,N-trimethylanilinium trifluoromethanesulfonate (5.0 mg, 14 µmol) in DMSO (800 µL) and the mixture was heated at 120 °C for 10 min. After cooling, 1 M NaOHaq (800 µL) was added and the mixture was heated at 100 °C for 5 min. After cooling, 1 M HClaq (1.0 mL) was added and the solution was transferred to a bottle containing H2O (10 mL). The solution was passed through an Oasis

ACS Paragon Plus Environment

Page 13 of 26

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Bioconjugate Chemistry

HLB Plus cartridge (Nihon Waters K.K., Tokyo, Japan). The cartridge was washed with H2O (5.0 mL). 4-[18F]fluorobenzoic acid was eluted with CH3CN (3 mL) into a second reaction vessel containing nPr4NOH (25% in H2O, 5 µL) in CH3CN (200 µL). The solvent was evaporated under a stream of N2 at 120 °C. CH3CN (1.0 mL) was added and the solvent was evaporated at 120 °C. To the residue was added 1-(2-aminoethyl)-1H-pyrrole-2,5-dione trifluoroacetate (8.9 mg, 35.0 µmol) in DMF (300 µL), HATU (13.3 mg, 35.0 µmol) in DMF (300 µL), and DIPEA (50 µL, 0.29 mmol) in DMF (100 µL) and the reaction was performed at 25 °C for 7 min. The mixture was transferred to a semi-preparative HPLC system, which included a wash of the reaction vessel with 0.05 M NH4OAc-0.1%AcOH (1.7 mL). After purification by reversed-phase HPLC (eluted with H2O/CH3CN = 70/30, 4.0 mL/min, 40 °C), the fraction containing [18F]FBEM was collected and diluted with H2O (15 mL). [18F]FBEM was trapped on the Oasis HLB Plus cartridge, eluted with CH2Cl2 (4.0 mL), and passed through two Sep-Pak Dry cartridges (Nihon Waters K.K., Tokyo, Japan) in series. The solution was evaporated under a stream of N2 with gentle heating (15-17min) and radioactivity was measured.

N-[2-(2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)ethyl]-4-fluoro-N-methylbenzenesulfonamide (N-[2-(4-[18F]fluoro-N-methylbenzenesulfonamido)ethyl]maleimide, [18F]7, [18F]FBSEM). Method A: To the residue containing [18F]fluoride, K2CO3, and Kryptofix 222 prepared in the same way as [18F]FBEM was added a solution of 10 (5.0 mg, 8.8 µmol) in DMSO (800 µL) and the mixture was heated at 90 °C for 10 min. After cooling, the mixture was combined with 0.05 M NH4OAc-0.1%AcOH (500 µL) and transferred to a semi-preparative HPLC

system,

which

included a wash of the reaction vessel with 0.05 M

NH4OAc-0.1%AcOH/CH3CN (80/20, 700 µL). After purification by reversed-phase HPLC (eluted with 0.05 M NH4OAc-0.1%AcOH/CH3CN = 60/40, 4.0 mL/min, 40 °C), the fraction containing [18F]6a was collected and diluted with H2O (20 mL). [18F]6a was trapped on an Oasis HLB Plus cartridge. The cartridge was washed with 1 M HCl (10 mL) and H2O (5.0 mL). [18F]6a was eluted with CH3CN (3.0 mL) into second reaction vessel. The solvent was evaporated under a stream of N2 at 90 °C and xylene (2.0 mL) was added. The mixture was heated at 160 °C for 10 min. After evaporation of solvent under a stream of N2 at 100 °C, [18F]7 was dissolved in Et2O (3.0 mL) and collected. Method B: To the residue containing [18F]fluoride, K2CO3, and Kryptofix 222 was added a solution of 10 (5.0 mg, 8.8 µmol) in DMSO (800 µL) and the mixture was heated at 100 °C for 10 min. After cooling, MsOH (20 µL, 0.308 mmol) in DMSO (150 µL) was added and the solution was heated at 170 °C for 5 min. The mixture was

ACS Paragon Plus Environment

Bioconjugate Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 14 of 26

transferred to a semi-preparative HPLC system with the addition of H2O (600 µL), which included a wash of the reaction vessel with 10%DMSO in H2O (1.2 mL). After purification by reversed-phase HPLC (eluted with 0.05 M NH4OAc-0.1%AcOH/MeOH = 50/50, 4.0 mL/min, 50 °C), the fraction containing [18F]7 was collected and diluted with H2O (20 mL). [18F]7 was trapped on the Oasis HLB Plus cartridge and the cartridge was washed with H2O (5.0 mL). [18F]7 was eluted with CH2Cl2 (3.0 mL) and passed through two Sep-Pak Dry cartridges in series. LC-MS (ESI+): 313.0 [M+H]+ (detected as [19F]FBSEM). [18F]FBSEM-GSH (Conjugation of [18F]7 ([18F]FBSEM) with glutathione). An aliquot (200 µL) of [18F]7 in CH2Cl2 was concentrated under a stream of N2. To the residue was added a solution of glutathione (1.0 mg/mL) in PBS (500 µL) and the mixture was incubated at room temperature for 30 min. The solution was analyzed by LC-MS. [18F]7 was completely consumed and radiochemical purity of [18F]FBSEM-GSH was almost 90%. LC-MS (ESI+): 620.1 [M+H]+ (detected as [19F]FBSEM-GSH).

ACKNOWLEDGEMENT

The authors would like to thank Dr. Shintaro Nishimura for his fruitful discussion.

SUPPORTING INFORMATION Experimental procedures of some compounds; NMR and MS spectra of new compounds; analytical and semi-preparative HPLC charts of radiosynthesis; and LC-MS data used to elucidate the structure of the by-product.

ABBREVIATIONS [18F]DDPFB,

N-[3-(2,5-

dioxo-2,5-dihydropyrrol-1-yl)phenyl]-4-[18F]fluorobenzamide;

N-[2-(4-[18F]fluorobenzamide)ethyl]maleimide; N-[2-(4-[18F]fluoro-N-methylbenzenesulfonamido)ethyl]maleimide;

[18F]FBEM, [18F]FBSEM, [18F]FPPD,

1-(4-[18F]fluorophenyl)pyrrole-2,5-dione; GSH, glutathione; K.222, Kryptofix 222; PBS, phosphate buffered saline; PET, positron emission tomography; [18F]SFB, N-succinimidyl-4-[18F]fluorobenzoate; SPE, solid phase extraction

ACS Paragon Plus Environment

Page 15 of 26

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Bioconjugate Chemistry

FUNDING The authors are employees of Astellas Pharma Inc. There is no other funding to declare.

REFERENCES

(1)

Murakami, Y., Matsuya, T., Kita, A., Yamanaka, K., Noda, A., Mitsuoka, K., Nakahara, T., Miyoshi, S., and Nishimura, S. (2013) Radiosynthesis, biodistribution and imaging of [11C]YM155, a novel survivin suppressant, in a human prostate tumor-xenograft mouse model. Nucl. Med. Biol. 40, 221-226.

(2)

Mihara, T., Noda, A., Arai, H., Mihara, K., Iwashita, A., Murakami, Y., Matsuya, T., Miyoshi, S., Nishimura, S., and Matsuoka, N. (2008) Brain Adenosine A2A Receptor Occupancy by a Novel A1/A2A Receptor Antagonist, ASP5854, in Rhesus Monkeys: Relationship to Anticataleptic Effect. J. Nucl. Med. 49, 1183-1188.

(3)

Noda, A., Takamatsu, H., Matsuoka, N., Koyama, S., Tsukada, H., and Nishimura, S. (2003) Effect of N-(4-Acetyl-1-piperazinyl)-p-fluorobenzamide

Monohydrate (FK960),

an

Antidementia Drug with a Novel Mechanism of Action, on Regional Cerebral Blood Flow and Glucose Metabolism in Aged Rhesus Macaques Studied with Positron Emission Tomography. J. Pharmacol. Exp. Ther. 306, 213-217. (4)

Mullard, A. (2016) 2015 FDA drug approvals. Nat. Rev. Drug Discov. 15, 73-76.

(5)

Kramer-Marek, G., Kiesewetter, D. O., Martiniova, L., Jagoda, E., Lee, S. B., and Capala, J. (2008) [18F]FBEM-ZHER2:342-Affibody molecule-a new molecular tracer for in vivo monitoring of HER2 expression by positron emission tomography. Eur. J. Nucl. Med. Mol.

Imaging 35, 1008-18. (6)

Fani, M., and Maecke, H. (2012) Radiopharmaceutical development of radiolabelled peptides. Eur. J. Nucl. Med. Mol. Imaging 39, 11-30.

(7)

Shiue, C. Y., Wolf, A. P., and Hainfeld, J. F. (1989) Synthesis of

18

F-labelled

N-(p-[18F]fluorophenyl)maleimide and its derivatives for labelling monoclonal antibody

ACS Paragon Plus Environment

Bioconjugate Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 16 of 26

with 18F. J. Labelled Compd. Radiopharm. 26, 287-289. (8)

Toyokuni, T., Walsh, J. C., Dominguez, A., Phelps, M. E., Barrio, J. R., Gambhir, S. S., and Satyamurthy,

N.

(2003)

Synthesis

of

a

new

heterobifunctional

N-[4-(aminooxy)butyl]maleimide, for facile access to a thiol-reactive

18

linker,

F-labeling agent.

Bioconjug. Chem. 14, 1253-9. (9)

Berndt, M., Pietzsch, J., and Wuest, F. (2007) Labeling of low-density lipoproteins using the 18

F-labeled

thiol-reactive

reagent

N-[6-(4-[18F]fluorobenzylidene)aminooxyhexyl]maleimide. Nucl. Med. Biol. 34, 5-15. (10)

Dollé, F., Hinnen, F., Lagnel, B., Boisgard, R., Sanson, A., Russo-Marie, F., and Tavitian, B. (2003) Radiosynthesis of a [18F]Fluoropyridine-based Maleimide Reagent for Protein Labelling. J. Labelled Compd. Radiopharm. 46, S15-S20.

(11)

de Bruin, B., Kuhnast, B., Hinnen, F., Yaouancq, L., Amessou, M., Johannes, L., Samson, A., Boisgard,

R.,

Tavitian,

B.,

and

1-[3-(2-[18F]Fluoropyridin-3-yloxy)propyl]pyrrole-2,5-dione:

Dollé,

F.

Design,

Synthesis,

(2005) and

Radiosynthesis of a New [18F]Fluoropyridine-Based Maleimide Reagent for the Labeling of Peptides and Proteins. Bioconjugate Chem. 16, 406-420. (12)

Cai, W., Zhang, X., Wu, Y., and Chen, X. (2006) A Thiol-Reactive

18

F-Labeling Agent,

N-[2-(4-18F-Fluorobenzamido)Ethyl]Maleimide, and Synthesis of RGD Peptide-Based Tracer for PET Imaging of αvβ3 Integrin Expression. J. Nucl. Med. 47, 1172-1180. (13)

Koslowsky, I., Mercer, J., and Wuest, F. (2010) Synthesis and application of 4-[18F]fluorobenzylamine: A versatile building block for the preparation of PET radiotracers.

Org. Biomol. Chem. 8, 4730-4735. (14)

Yue, X., Kiesewetter, D. O., Guo, J., Sun, Z., Zhang, X., Zhu, L., Niu, G., Ma, Y., Lang, L., and Chen, X. (2013) Development of a New Thiol Site-Specific Prosthetic Group and Its Conjugation with [Cys40]-exendin-4 for in Vivo Targeting of Insulinomas. Bioconjugate

Chem. 24, 1191-1200. (15)

Way, J., and Wuest, F. (2013) Fully automated synthesis of 4-[18F]fluorobenzylamine based

ACS Paragon Plus Environment

Page 17 of 26

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Bioconjugate Chemistry

on borohydride/NiCl2 reduction. Nucl. Med. Biol. 40, 430-436. (16)

Akula,

M.,

Moore,

T.,

Kabalka,

G.

W.

(2013)

2-[18F]Fluoropyridine-3-aldehyde-O-{6-(2,5-dioxo-2,5-dihydropyrrol-1-yl)hexyl]Oxime: A new thiol reactive bifunctional linker for the labeling of peptides and proteins. J. Labelled

Compd. Radiopharm. 56, S44. (17)

Yue, X., Yan, X., Wu, C., Niu, G., Ma, Y., Jacobson, O., Shen, B., Kiesewetter, D. O., and Chen, X. (2014) One-Pot Two-Step Radiosynthesis of a New

18

F-Labeled Thiol Reactive

Prosthetic Group and Its Conjugate for Insulinoma Imaging. Mol. Pharm. 11, 3875-3884. (18)

Gao, H., Niu, G., Yang, M., Quan, Q., Ma, Y., Murage, E. N., Ahn, J. M., Kiesewetter, D. O., and Chen, X. (2011) PET of insulinoma using

18

F-FBEM-EM3106B, a new GLP-1

analogue. Mol. Pharm. 8, 1775-82. (19)

Kiesewetter, D. O., Gao, H., Ma, Y., Niu, G., Quan, Q., Guo, N., and Chen, X. (2012) 18

F-radiolabeled analogs of exendin-4 for PET imaging of GLP-1 in insulinoma. Eur. J.

Nucl. Med. Mol. Imaging 39, 463-73. (20)

Li, W., Niu, G., Lang, L., Guo, N., Ma, Y., Kiesewetter, D. O., Backer, J. M., Shen, B., and Chen, X. (2012) PET imaging of EGF receptors using [18F]FBEM-EGF in a head and neck squamous cell carcinoma model. Eur. J. Nucl. Med. Mol. Imaging 39, 300-8.

(21)

Miao, Z., Ren, G., Liu, H., Qi, S., Wu, S., and Cheng, Z. (2012) PET of EGFR expression with an 18F-labeled affibody molecule. J. Nucl. Med. 53, 1110-8.

(22)

Wang, H., Gao, H., Guo, N., Niu, G., Ma, Y., Kiesewetter, D. O., and Chen, X. (2012) Site-Specific Labeling of scVEGF with Fluorine-18 for Positron Emission Tomography Imaging. Theranostics 2, 607-17.

(23)

Lacroix, S., Egrise, D., Van Simaeys, G., Doumont, G., Monclus, M., Sherer, F., Herbaux, T., Leroy, D., and Goldman, S. (2013) [18F]-FBEM, a tracer targeting cell-surface protein thiols for cell trafficking imaging. Contrast Media Mol. Imaging 8, 409-16.

(24)

Bondue, B., Sherer, F., Van Simaeys, G., Doumont, G., Egrise, D., Yakoub, Y., Huaux, F., Parmentier, M., Rorive, S., Sauvage, S. et al. (2015) PET/CT with

ACS Paragon Plus Environment

18

F-FDG- and

Bioconjugate Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

18

F-FBEM-labeled leukocytes for metabolic activity and leukocyte recruitment monitoring

in a mouse model of pulmonary fibrosis. J. Nucl. Med. 56, 127-32. (25)

Lu, C., Jiang, Q., Hu, M., Tan, C., Yu, H., and Hua, Z. (2015) Preliminary biological evaluation of

18

F-FBEM-Cys-Annexin V a novel apoptosis imaging agent. Molecules 20,

4902-14. (26)

Kiesewetter, D. O., Krämer-Marek, G., Ma, Y., and Capala, J. (2008) Radiolabeling of HER2-specific Affibody® molecule with F-18. J. Fluorine Chem. 129, 799-806.

(27)

Kiesewetter, D. O., Jacobson, O., Lang, L., and Chen, X. (2011) Automated radiochemical synthesis of [18F]FBEM: A thiol reactive synthon for radiofluorination of peptides and proteins. Appl. Radiat. Isot. 69, 410-414.

(28)

Ackermann, U., Plougastel, L., Wichmann, C., Goh, Y. W., Yeoh, S. D., Poniger, S. S., Tochon-Danguy, H. J., and Scott, A. M. (2014) Fully automated synthesis and coupling of [18F]FBEM to glutathione using the iPHASE FlexLab module. J. Labelled Compd.

Radiopharm. 57, 115-120. (29)

Heath, W. H., Palmieri, F., Adams, J. R., Long, B. K., Chute, J., Holcombe, T. W., Zieren, S., Truitt, M. J., White, J. L., and Willson, C. G. (2008) Degradable Cross-Linkers and Strippable Imaging Materials for Step-and-Flash Imprint Lithography. Macromolecules 41, 719-726.

ACS Paragon Plus Environment

Page 18 of 26

Page 19 of 26

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Bioconjugate Chemistry

24x7mm (600 x 600 DPI)

ACS Paragon Plus Environment

Bioconjugate Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Figure 1. Synthetic strategy of maleimide reagent: (A) reported method; (B) our original method. 103x48mm (600 x 600 DPI)

ACS Paragon Plus Environment

Page 20 of 26

Page 21 of 26

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Bioconjugate Chemistry

Figure 2. Estimated structure of a byproduct. 30x15mm (600 x 600 DPI)

ACS Paragon Plus Environment

Bioconjugate Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Scheme 1. Synthetic route for [18F]FBEM. 70x22mm (600 x 600 DPI)

ACS Paragon Plus Environment

Page 22 of 26

Page 23 of 26

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Bioconjugate Chemistry

Scheme 2. Designed compound and planned synthetic route. 32x5mm (600 x 600 DPI)

ACS Paragon Plus Environment

Bioconjugate Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Scheme 3a. Synthetic route for FBSEM and the precursor of [18F]FBSEM. 102x48mm (600 x 600 DPI)

ACS Paragon Plus Environment

Page 24 of 26

Page 25 of 26

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Bioconjugate Chemistry

Scheme 4. Synthetic route of [18F]FBSEM: (A) primary route; (B) modified route. 72x16mm (600 x 600 DPI)

ACS Paragon Plus Environment

Bioconjugate Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Scheme 5. Conjugation of [18F]FBSEM with glutathione. 60x18mm (600 x 600 DPI)

ACS Paragon Plus Environment

Page 26 of 26