Development of a water-mediated and catalyst-free green protocol for

Research Article pubs.acs.org/journal/ascecg

Development of a Water-Mediated and Catalyst-Free Green Protocol for Easy Access to a Huge Array of Diverse and Densely Functionalized Pyrido[2,3‑d:6,5‑d′]dipyrimidines via One-Pot Multicomponent Reaction under Ambient Conditions Goutam Brahmachari,* Khondekar Nurjamal, Indrajit Karmakar, Sanchari Begam, Nayana Nayek, and Bhagirath Mandal Laboratory of Natural Products & Organic Synthesis, Department of Chemistry, Visva-Bharati (a Central University), Santiniketan−731 235, West Bengal, India S Supporting Information *

ABSTRACT: A water-mediated and catalyst-free simple protocol for easily accessing a huge array of pharmaceutically interesting and diversely functionalized 5-alkyl/aryl/heteroaryl-10-alkyl/aryl-2,8-dioxo/dithioxo-9,10-dihydropyrido[2,3d:6,5-d′]dipyrimidine-4,6(1H,3H,5H,7H)-dione derivatives 4 (4-1−4-42) and 5,5′-(1,4-phenylene)bis(10-alkyl/aryl-2,8dioxo/dithioxo-9,10-dihydropyrido[2,3-d:6,5-d′]dipyrimidine4,6(1H,3H,5H,7H)-dione) 4′ (4′-1−4′-8) has been developed based on a one-pot multicomponent reaction between barbituric/N,N-dimethylbarbituric/2-thiobarbituric acids (1), substituted amines (2), and aldehydes (3) under ambient conditions. The salient features of this protocol are the clean reaction profile, use of no added catalyst, water as reaction media, mild reaction conditions at room temperature, energyefficiency, easy isolation of products, no need of column chromatographic purification, high atom-economy and low E-factor, good to excellent yields, and reusability of reaction media. KEYWORDS: Water-mediated reaction, Catalyst-free, One-pot multicomponent reaction, Green synthesis, Functionalized pyrido[2,3-d:6,5-d′]dipyrimidines

■

spectrum of promising biological activities.22−29 Among various tricyclic pyrimidopyridopyrimidines, the pyrido[2,3-d:6,5-d′]dipyrimidine scaffold has attracted much attention because a handful of such derivatives possess considerable α-glucosidase and α-amylase inhibitory activity,30 antibacterial,31,32 antiviral,33 NAD-type redox catalytic,34 and anticorrosive35,36 properties. In addition, such a scaffold has been reported to have the potential in self-assembling to constitute supramolecular structure as well.37 Literature surveys revealed that there are a number of methods for the synthesis of N 10 -unsubstituted 9,10dihydropyrido[2,3-d:6,5-d′]dipyrimidine-2,4,6,8(1H,3H,5H,7H)-tetraones using a variety of catalysts such as DBU,38 SBA-15-SO3H,39 [H-NMP]+[HSO4]−,32 γ-Fe2O3@ HAp-SO3H,40 nano-CuFe2O4,41−43 nano-Fe3O4,44 and these protocols required the use of organic solvents, heating, and/or refluxing, microwave irradiation, and ultrasound irradiation.

INTRODUCTION Heterocyclic moieties, particularly polyfunctionalized heterocycles (PFHs), are widely prevalent in bioactive natural products as well as in marketed pharmaceuticals, agrochemicals, dyes, and many other application-oriented materials.1−7 Hence, research on the synthesis of PFHs has gained special attention. Among N-heterocycles, pyrimidine and its derivatives are reported for a wide range of biological profiles including antioxidant, anti-inflammatory, immunomodulating, antibacterial, antiviral, and antitumor activity.8−12 Categorically, barbituric/2-thiobarbituric acids, an important class of pharmaceutically promising pyrimidine derivatives, find potential applications as building blocks for a series of barbiturate/ thiobarbiturate drugs used as hypnotics, sedatives, anticonvulsants, anesthetics, antioxidants, antifungal, and as CNS depressants.13−21 Combination of barbituric/thiobarbituric acid moiety with other pharmacophoric groups, thus, may offer a possibility to synthesize numerous derivatives with desired potential biological effects. With this view, pyrimidinefused pyridines, especially pyrido[2,3-d]pyrimidines, have been studied intensively over the recent past due to their wide © 2017 American Chemical Society

Received: August 6, 2017 Revised: August 29, 2017 Published: September 3, 2017 9494

DOI: 10.1021/acssuschemeng.7b02696 ACS Sustainable Chem. Eng. 2017, 5, 9494−9505

Research Article

ACS Sustainable Chemistry & Engineering

Scheme 1. Catalyst-Free One-Pot Room Temperature Synthesis of Diversely Functionalized 5-Alkyl/aryl/heteroaryl-10-alkyl/ aryl-2,8-dioxo/dithioxo-9,10-dihydropyrido[2,3-d:6,5-d′]dipyrimidine-4,6(1H,3H,5H,7H)-diones (4/4′)

However, syntheses of N10-substituted dihydropyrido[2,3-d:6,5d′]dipyrimidines were reported only by the research group of Khalafi-Nezhad from the three-component condensation reaction of barbituric acids, anilines, and aromatic aldehydes or sugars upon refluxing the reactants in ethanol either in the presence of phosphotungstic acid (TPA)45 or p-toluenesulfonic acid46 or magnetic nanoparticle-supported tungstic acid (MNPTA)47 as the catalyst. Under this purview and in continuation of our endeavors in developing alternative green protocols for biologically relevant compounds,48−60 we herein wish to report a water-mediated, convenient, and catalyst-free practical method for the synthesis of a huge array of functionalized 5alkyl/aryl/heteroaryl-10-alkyl/aryl-2,8-dioxo/dithioxo-9,10dihydropyrido[2,3-d:6,5-d′]dipyrimidine-4,6(1H,3H,5H,7H)dione derivatives (4/4′) from the one-pot multicomponent reaction between barbituric/N,N-dimethylbarbituric/2-thiobarbituric acids (1), diverse amines (2), and aldehydes (3) in water at ambient conditions (25−30 °C); the overall results are summarized in Scheme 1. The key advantages of this newly developed protocol are the clean reaction profile, use of no added catalyst, water as reaction media, mild reaction conditions at room temperature, energy-efficiency, use of commercially available low-cost starting materials, no need of column chromatographic purification, high atom-economy and low E-factor, and good to excellent yields. From green chemistry perspectives, making use of water as a safe and green solvent,61−66 implementation of one-pot multicomponent reaction (MCR) strategy with huge operational benefits,67−72 and enabling useful organic syntheses involving molecular hybridization (MH)73−75 exploiting just ambient reaction conditions76−83 are steps forward toward the cause of green and sustainable chemistry.

benzaldehyde (3-1; 1.0 equiv) in the absence of any catalyst in aqueous medium (4 mL) under ambient conditions. To our delight the reactants resulted in the desired compound, 5-(4nitrophenyl)-10-phenyl-9,10-dihydropyrido[2,3-d:6,5-d′]dipyrimidine-2,4,6,8(1H,3H,5H,7H)-tetraone (4-1), in 85% yield on stirring for 12 h (Table 1, entry 1). To check the Table 1. Optimization of Reaction Conditions for the Synthesis of Substituted 9,10-Dihydropyrido[2,3-d:6,5d′]dipyrimidine-2,4,6,8(1H,3H,5H,7H)-Tetraones (4)

entry

solvent

time (h)

yield (%)a,b

1 2

H2O Neat

12 24

85 trace

a

Reaction conditions: barbituric acid (1.0 mmol), aniline (0.5 mmol), and 4-nitrobenzaldehyde (0.5 mmol) in 4 mL of water/neat at room temperature (25−30 °C) without any added catalyst. bIsolated yields.

impact of water as solvent, we then carried out the same reaction under neat conditions and observed that the reaction practically did not occur at all (Table 1, entry 2). This fact demonstrated the effectiveness of water as a suitable medium for this reaction. Compound 4-1 was characterized by its analytical and spectral properties. The results are summarized in Table 1. Under the optimized conditions, we then carried out the reaction between barbituric acid, 4-methylaniline, and 4nitrobenzaldehyde, and another between barbituric acid, 4methylaniline, and 3-nitrobenzaldehyde; both the reactions furnished the respective desired products, viz. 5-(4-nitrophenyl)-10-(p-tolyl)-9,10-dihydropyrido[2,3-d:6,5-d′]dipyrimidine-2,4,6,8(1H,3H,5H,7H)-tetraone (4-2) (Table 2, entry 2) and 5-(3-nitrophenyl)-10-(p-tolyl)-9,10dihydropyrido[2,3-d:6,5-d′]dipyrimidine-2,4,6,8(1H,3H,5H,7H)-tetraone (4-3) (Table 2, entry 3), in 91% and 88% yield, respectively, within 11−12 h. To check the

■

RESULTS AND DISCUSSION Based on critical survey of the literature on catalyst-free organic transformations coupled with our own experiences in performing this kind of organic syntheses,84,85 we envisioned that such a 9,10-dihydropyrido[2,3-d:6,5-d′]dipyrimidine-2,4,6,8(1H,3H,5H,7H)-tetraone scaffold might be constructed out of a one-pot multicomponent reaction of its starting constituents such as barbituric acid, amine, and aldehyde without the aid of any catalyst in the presence of a suitable solvent. First we checked our model reaction with a mixture of barbituric acid (1-1; 2.0 equiv), aniline (2-1; 1.0 equiv), and 4-nitro9495


Research Article


Table 2. Synthesis of Diversely Substituted 5-Alkyl/aryl/heteroaryl-10-alkyl/aryl-2,8-dioxo/dithioxo-9,10-dihydropyrido[2,3d:6,5-d′]dipyrimidine-4,6(1H,3H,5H,7H)-diones (4)

a

Reaction conditions: barbituric acid/N,N-dimethylbarbituric acid/2-thiobarbituric acid (1; 1.0 mmol), amines (2; 0.5 mmol), and aldehydes (3; 0.5 mmol) in 4 mL of water at room temperature in the absence of any catalyst/additive. bIsolated yields. 9496


Research Article


trifluoromethylaniline) (1 equiv) and aldehydes (viz. nbutyraldehyde, 3,4-dimethoxybenzaldehyde, 9-anthracenylaldehyde, 2-/4-fluorobenzaldehyde, terephthalaldehyde) (1 equiv) in water under the catalyst-free conditions just at room temperature. To our delight, all the seven reactions produced the expected products of a new series of substituted 9,10-dihydropyrido[2,3-d:6,5-d′]dipyrimidine-2,4,6,8-tetraones (4-21−4-27) (Table 2, entries 21−27) with yields ranging from 62 to 80% within 14−18 h. Encouraged by these results, we then planned to replace barbituric acid/N,N-dimethylbarbituric acid with 2-thiobarbituric acid so as to further extend the applicability of this newly developed protocol in generating 2-thioxo-substituted analogues. For this purpose, we performed a set of three varying reactions (Table 2, entries 28−30) by treating 2-thiobarbituric acid (2 equiv) with three separate reactant mixtures of aniline (2-28; 1 equiv) and 4-methoxybenzaldehyde (3-28; 1 equiv), 4trifluoromethylaniline (2-29; 1 equiv) and 2-furaldehyde (3-29; 1 equiv), and 4-trifluoromethoxyaniline (2-30; 1 equiv) and 4bromobenzaldehyde (3-30; 1 equiv) in water under the same reaction conditions, and we were delighted to obtain the respective desired products, 5-(4-methoxyphenyl)-10-phenyl2,8-dithioxo-2,3,7,8,9,10-hexahydropyrido[2,3-d:6,5-d′]dipyrimidine-4,6(1H,5H)-dione (4-28), 5-(furan-2-yl)-2,8-dithioxo-10-(4-(trifluoromethyl)phenyl)-2,3,7,8,9,10-hexahydropyrido[2,3-d:6,5-d′]dipyrimidine-4,6(1H,5H)-dione (4-29) and 5-(4-bromophenyl)-2,8-dithioxo-10-(4-(trifluoromethoxy)phenyl)-2,3,7,8,9,10-hexahydropyrido[2,3-d:6,5-d′]dipyrimidine-4,6(1H,5H)-dione (4-30) with 83%, 75%, and 78% yields, respectively, within 14−16 h. We, furthermore, utilized the optimized reaction conditions to synthesize a series of 12 more new 5-aryl-2,8-dithioxo-10-alkyl/aryl-2,3,7,8,9,10hexahydropyrido[2,3-d:6,5-d′]dipyrimidine-4,6(1H,5H)-dione derivatives (4-31−4-42) (Table 2, entries 31−42) from the one-pot reaction of 2-thiobarbituric acid (2 equiv) with a varying range of aliphatic/aromatic amines (2; 1 equiv) and aldehydes (3; 1 equiv) in aqueous medium without the aid of any catalyst under ambient conditions. All the reactions were successfully completed furnishing the expected products 4-31− 4-42 (Table 2, entries 31−42) with good yields ranging from 67 to 81% within 14−18 h. The overall results are summarized in Table 2. With this successful background, we were motivated to study the present protocol whether capable to furnish 5,5′-(1,4phenylene)bis(10-alkyl/aryl-2,8-dioxo/dithioxo-9,10-dihydropyrido[2,3-d:6,5-d′]dipyrimidine-4,6(1H,3H,5H,7H)-dione) scaffold upon reaction with bis-carboxyaldehyde such as phthalaldehyde, isophthalaldehyde, and terephthalaldehyde. Accordingly, we performed the reaction between barbituric acid (4 equiv), an amine (2 equiv), and bis-carboxyaldehyde (1 equiv) in aqueous medium at ambient conditions and observed that both phthalaldehyde and isophthalaldehyde did not undergo any reaction (possibly due to steric crowding), while terephthalaldehyde produced the desired bis-9,10dihydropyrido[2,3-d:6,5-d′]dipyrimidine scaffold (4′) satisfactorily. We performed a set of eight such one-pot multicomponent reactions between barbituric acid/N,N-dimethylbarbiturc acid/2-thiobarbituric acid (4 equiv), substituted aliphatic/aromatic amines (2 equiv), and terephthalaldehyde (4-formylbenzaldehyde; 1 equiv) in water at room temperature

generality as well as the effectiveness of this newly developed protocol, barbituric acid was reacted with diverse aromatic amines (bearing substituents like bromo, trifluoromethyl, methoxyl, and trifluoromethoxyl at varying positions) and aromatic aldehydes containing the functionalities such as bromo, chloro, cyano, trifluoromethyl, mono-, di- and trimethoxyls, and nitro using identical reaction conditions. All of these varying 12 entries underwent the reaction smoothly affording the corresponding 5,10-diaryl-9,10-dihydropyrido[2,3-d:6,5-d′]dipyrimidine-2,4,6,8(1H,3H,5H,7H)-tetraones (44−4-15) (Table 2, entries 4−15) in good to excellent yields ranging from 57 to 93% at room temperature within 10−16 h. The variation in the yields of these products (4-1−4-15) indicates that the presence of an electron-withdrawing function in the reacting aldehyde and an electron-releasing function in amine substrate facilitates the reaction as expected. Formation of 10-(4-(trifluoromethyl)phenyl)-5-(3,4,5-trimethoxyphenyl)9,10-dihydropyrido[2,3-d:6,5-d′]dipyrimidine-2,4,6,8(1H,3H,5H,7H)-tetraone (4-14; Table 2, entry 14) in somewhat moderate yield of 57% at 16 h could be rationalized from the fact that the 4-CF3 substituent offers a strong electronwithdrawing effect on the amine, while 3,4,5-trimethoxyl moiety also imposes some steric constraint toward the reactivity of the aldehyde. A similar situation also prevails for entry 15 where 4-OCF3 group reduces the reactivity of the amine (2-15) by imposing a strong electron-withdrawing effect, and the reactivity of the aldehyde (3-15) is retarded by steric crowding offered by its 3,4-dimethoxyl substituents, giving a yield of 60% for 5-(3,5-dimethoxyphenyl)-10-(4-(trifluoromethoxy)phenyl)9,10-dihydropyrido[2,3-d:6,5-d′]dipyrimidine-2,4,6,8(1H,3H,5H,7H)-tetraone (4-15). Under the same reaction conditions, aliphatic amines such as n-propyl amine (2-16) and n-hexylamine (2-17) also reacted smoothly with barbituric acid and 2-/3-nitrobenzaldehydes affording the respective desired products, 5-(2-nitrophenyl)-10propyl-9,10-dihydropyrido[2,3-d:6,5-d′]dipyrimidine-2,4,6,8(1H,3H,5H,7H)-tetraone (4-16; Table 2, entry 16) and 10hexyl-5-(3-nitrophenyl)-9,10-dihydropyrido[2,3-d:6,5-d′]dipyrimidine-2,4,6,8(1H,3H,5H,7H)-tetraone (4-17; Table 2, entry 17) with moderate yields of 63−66% at 12 h. Then we thought about amino acid as an interesting variant of aliphatic/ aromatic amines, and we were delighted to synthesize 3-(4hydroxyphenyl)-2-(5-(4-nitrophenyl)-2,4,6,8-tetraoxo1,2,3,4,6,7,8,9-octahydropyrido[2,3-d:6,5-d′]dipyrimidin10(5H)-yl)propanoic acid (4-18; Table 2, entry 18) from the reaction of L-tyrosine (2-18) with the mixture of barbituric acid and 4-nitrobenzaldehyde in water at ambient conditions in 70% yield at 16 h. In another two occasions, when terephthalaldehyde (4-formylbenzaldehyde) was reacted with barbituric acid and substituted amines under these reaction conditions, we isolated the corresponding products 4-19 (82% at 12 h; Table 2, entry 19) and 4-20 (77% at 14 h; Table 2, entry 20) with the 4-formyl group intact in their molecular structures. Such novel series of compounds with free formyl group are of much chemical interest. Inspired by these results, we then replaced unsubstituted barbituric acid with N,N-dimethylbarbituric acid and carried out a set of seven different reactions upon treating this substituted barbituric acid (2 equiv) with diverse amines (viz. 4(methylthio)aniline, L-alanine, L-tyrosine, D-glucosamine, 49497


Research Article


Table 3. Synthesis of Diversely Substituted 5,5′-(1,4-Phenylene)bis(10-alkyl/aryl-2,8-dioxo/dithioxo-9,10-dihydropyrido[2,3d:6,5-d′]dipyrimidine-4,6(1H,3H,5H,7H)-dione) (4′)

melting point (°C) entry

substituent (X)

substituent (R1)

substituent (R2)

substituent (R3)

product

time (h)

yield (%)a,b

E-factor (g/g)

found

reported

1 2 3 4 5 6 7 8

O O O O O S S S

H H CH3 CH3 CH3 H H H

4-OCH3C6H4 4-CF3C6H4 4-CH3C6H4 4-SCH3C6H4 4-CF3C6H4 4-OCH3C6H4 4-CF3C6H4 c-Hex

4-CHOC6H4 4-CHOC6H4 4-CHOC6H4 4-CHOC6H4 4-CHOC6H4 4-CHOC6H4 4-CHOC6H4 4-CHOC6H4

4′-1 4′-2 4′-3 4′-4 4′-5 4′-6 4′-7 4′-8

16 18 14 15 18 17 18 16

83 78 80 82 75 82 80 81

0.37 0.45 0.41 0.37 0.49 0.38 0.40 0.41

155−157 >330 168−170 155−157 195−197 280−282 198−200 232−234

− − − − − − − −

a Reaction conditions: barbituric acid/N,N-dimethylbarbituric acid/2-thiobarbituric acid (1; 1.0 mmol), amines (2; 0.5 mmol), and aldehydes (3; 0.25 mmol) in 4 mL of water at room temperature in the absence of any catalyst/additive. bIsolated yields.

Scheme 2. Proposed Mechanism for the Water-Mediated Pseudo-Six-Component One-Pot Synthesis of Diversely Substituted 2,8-Dioxo/dithioxo-9,10-dihydropyrido[2,3-d:6,5-d′]dipyrimidine-4,6(1H,3H,5H,7H)-diones (4) at Ambient Conditions

without the aid of any added catalyst. To our delight that in all these eight occasions we were successful in isolating the respective desired products of 5,5′-(1,4-phenylene)bis(10alkyl/aryl-2,8-dioxo/dithioxo-9,10-dihydropyrido[2,3-d:6,5-d′]dipyrimidine-4,6(1H,3H,5H,7H)-dione) (4′-1−4′-8) with good yields ranging from 75 to 83% within 14−18 h. The overall results are summarized in Table 3.

All the products (4-1−4-42 and 4′-1−4′-8) were isolated pure just by washing with cold aqueous ethanol. All the isolated products are new and were fully characterized on the basis of their analytical data and detailed spectral studies including FTIR, 1H NMR, 13C NMR, and DEPT-135. We herein propose a possible mechanism (Scheme 2) for the water-mediated one-pot synthesis of diversely substituted 5alkyl/aryl/heteroaryl-10-alkyl/aryl-2,8-dioxo/dithioxo-9,109498


Research Article


Table 4. Large-Scale Synthesis of a Set of Three Varying 9,10-Dihydropyrido[2,3-d:6,5-d′]dipyrimidine Derivatives (4)

a

Reaction conditions: barbituric acid/N,N-dimethylbarbituric acid/2-thiobarbituric acid (1; 20 mmol), amines (2; 10 mmol), and aldehydes (3; 10 mmol) in 15 mL of water at room temperature in the absence of any catalyst/additive. bIsolated yields.

dihydropyrido[2,3-d:6,5-d′]dipyrimidine-4,6(1H,3H,5H,7H)diones (4) from pseudo-six-component reaction of barbituric acids (1), amines (2), and aldehydes (3), based on pH monitoring throughout the progress of the reaction as well as isolation and characterization of respective intermediates 7 and 9 for a representative entry (entry 5, Table 2). We successfully isolated and characterized (see Experimental Section) the enamine derivative, 6-((4-bromophenyl)amino)pyrimidine-2,4(1H,3H)-dione (7-5; yield 77%) from the reaction of barbituric acid (1-5; 1 equiv) and 4-bromoaniline (2-5; 1 equiv), and also the chalcone derivative, 4-((2,4,6-trioxotetrahydropyrimidin5(2H)-ylidene)methyl)benzonitrile (9-5; yield 71%) from the reaction of barbituric acid (1-5; 1 equiv) and 4-cyanobenzaldehyde (3-5; 1 equiv) in aqueous medium at ambient conditions without the aid of any added catalyst. In the next step, these isolated intermediates 7-5 and 9-5 upon mixing and stirring together in water produced the desired product, 4-(10-(4br omophenyl)-2,4,6,8-tetraoxo-1,2,3, 4,5,6,7,8,9,10decahydropyrido[2,3-d:6,5-d′]dipyrimidin-5-yl)benzonitrile (45) under the same reaction conditions. The results of pH monitoring throughout the progress of this representative entry 5 are quite logical with the proposed paththe first molecule of barbituric acid (1-5; 0.5 mmol) in 2 mL of distilled water recorded a pH of 2.57 that shifted to 2.93 on addition of 4-bromoaniline (2-5; 0.5 mmol) to it. Such an acidic pH of the reaction mixture facilitates formation of the corresponding imine 6 (6-5) through a condensation reaction between 1-5 and 2-5. The imine, thus formed, then tautomerizes to enamine 7 (7-5). In another step, the second molecule of barbituric acid (1-5; 0.5 mmol) in 2 mL of distilled water when added with 4-cyanobenzaldehyde (3-5; 0.5 mmol) recorded a pH of 1.44, and under this acidic condition, the equilibrium is shifted toward the enol form (1′), which takes part in the Claisen-Schmidt condensation with the activated aldehyde 3 to generate chalcone 9. Once enamine 7 and chalcone 9 species are formed, they mutually undergo Michael addition to produce the adduct 10, which subsequently tautomerizes to intermediate 11. Under acidic pH of the reaction media, this Michael adduct 11 then takes part in a facile intramolecular ring-closure via 6-exo-trig process to generate the cycloadduct 12 that eventually furnishes the desired product 4 on removal of water as a green waste (Scheme 2). We also examined the feasibility of this method for somewhat scaled-up (on the gram scale; 10 mmol scale) experiment with three varying entries (Table 4; entries 1−3) at room

temperature in aqueous medium under catalyst-free conditions. All the three varying barbituric acids underwent 10 mmol scale reactions smoothly with three different sets of amines and aldehydes to furnish the respective desired products, viz. 5-(4nitrophenyl)-10-(p-tolyl)-9,10-dihydropyrido[2,3-d:6,5-d′]dipyrimidine-2,4,6,8(1H,3H,5H,7H)-tetraone (4-2), 2-(5-(anthracen-9-yl)-1,3,7,9-tetramethyl-2,4,6,8-tetraoxo1,2,3,4,6,7,8,9-octahydropyrido[2,3-d:6,5-d′]dipyrimidin10(5H)-yl)propanoic acid (4-22), and 5-(furan-2-yl)-2,8dithioxo-10-(4-(trifluoromethyl)phenyl)-2,3,7,8,9,10hexahydropyrido[2,3-d:6,5-d′]dipyrimidine-4,6(1H,5H)-dione (4-29), in 88%, 73%, and 74% respective isolated yields; the product-yields of these large-scale reactions are almost similar to 0.5 mmol scale entry (Table 2, entries 2, 22, and 29) in terms of respective yield and time. This experimental outcome is quite promising for possible application of this catalyst-free room temperature protocol in large-scale production of such biologically relevant heterocycles. This is also to be mentioned herein that the washings collected upon filtration and purification of isolated products can be reused for individual cases. We performed a representative recycling experiment with such washings obtained during the large-scale synthesis of 5-(4-nitrophenyl)10-(p-tolyl)-9,10-dihydropyrido[2,3-d:6,5-d′]dipyrimidine2,4,6,8(1H,3H, 5H, 7H)-tetraone (4-2; Table 4, entry 1)the collective washings containing the residual reactants and certain portions of the product as washed out with ethanol−water on purification was made an optimum volume of about 15 mL each time (by distilling out ethanol and excess amount of water) to run the next batch of reaction upon adding the requisite reactants [barbituric acid (1; 20 mmol), 4-methylamine (2; 10 mmol), and 4-nitrobenzaldehyde (3; 10 mmol)]. We carried out this representative recycling experiment with this entry (Table 4, entry 1) four times, and the desired product 4-2 was isolated in almost identical yield (88−91%) in all the runs. We evaluated green chemistry credentials of this newly developed one-pot synthetic protocol by performing a series of green metrics calculations86−93 such as effective mass yield (EMY), atom economy (AE), atom efficiency (AEf), carbon efficiency (CE), reaction mass efficiency (RME), optimum efficiency (OE), mass productivity (MP), mass intensity (MI) and process mass intensity (PMI), E-factor, and solvent and water intensity (SI and WI) for all the synthesized compounds 4 (4-1−4-42) and 4′ (4′-1−4′-8) (see the Supporting Information). The calculated effective mass yield, atom 9499


Research Article


mixture was added with another portion of barbituric/N,Ndimethylbarbituric/2-thiobarbituric acid (1; 0.5 mmol), aldehydes (3; 0.5 mmol in case of 4 and 0.25 mmol in case of 4′), and 2 mL of distilled water in a sequential manner at ambient conditions. The overall reaction mixture was then stirred vigorously for the stipulated time frame (10−18 h). The progress of the reaction was monitored by TLC. On completion of the reaction, a solid mass precipitated out that was filtered off, followed by purification of the crude product just by washing with cold aqueous ethanol. The structure of each purified compound (both 4 and 4′) was confirmed by analytical as well as spectral studies including FT-IR, 1H NMR, 13C NMR, and DEPT-135. The spectral and analytical data of some selected representative compounds (4 and 4′) are given below: 5-(4-Nitrophenyl)-10-phenyl-9,10-dihydropyrido[2,3-d:6,5d′]dipyrimidine-2,4,6,8(1H,3H, 5H,7H)-tetraone (4-1). White solid; yield: 85% (190 mg; 0.5 mmol scale); mp = 193−195 °C. IR (KBr): νmax = 3268 (NH), 3124, 3006, 1698 (CONH), 1683 (CONH), 1629, 1618, 1501, 1489, 1471, 1409, 1370, 1345, 1292, 1222, 1157, 1113, 907, 878, 850, 784, 739, 689, 647, 556, 451, 434 cm−1. 1H NMR (400 MHz, DMSO-d6): δ = 10.19 (br s, 4H, 4 × −NH), 8.05 (d, 2H, J = 8.8 Hz, Ar−H), 7.39 (t, 2H, J = 8.0 and 7.6 Hz, Ar−H), 7.28 (d, 2H, J = 8.4 Hz, Ar−H), 7.23 (d, 1H, J = 7.6 Hz, Ar−H), 7.19 (dd, 2H, J = 8.0 and 0.8 Hz, Ar−H), 6.05 (s, 1H, −CH) ppm. 13C NMR (100 MHz, DMSO-d6): δ = 168.47 (CO), 165.01 (CO), 164.93 (CO), 163.26 (CO), 154.65, 151.06 (2C), 145.45, 135.73, 130.08 (2C), 128.34 (2C), 126.04, 123.30 (2C), 121.65 (2C), 90.73 (2C), 31.90 (CH) ppm. Elemental analysis calcd (%) for C21H14N6O6: C, 56.51; H, 3.16; N, 18.83. Found: C, 56.43; H, 3.15; N, 18.86. 10-(4-Methoxyphenyl)-5-(4-(trifluoromethyl)phenyl)-9,10dihydropyrido[2,3-d:6,5-d′]dipyrimidine-2,4,6,8(1H,3H,5H,7H)tetraone (4-6). White solid; yield: 87% (217 mg; 0.5 mmol scale); mp = 208−210 °C. IR (KBr): νmax = 3195 (NH), 3030, 2943, 2915, 2834, 1717, 1684 (CONH), 1680 (CONH), 1644, 1603, 1507, 1391, 1326, 1258, 1229, 1161, 1119, 1068, 873, 821,653, 582, 551, 460 cm−1. 1 H NMR (400 MHz, DMSO-d6): δ = 10.11 (br s, 4H, 4 × −NH), 7.49 (d, 2H, J = 8.4 Hz, Ar−H), 7.21 (d, 2H, J = 8.0 Hz, Ar−H), 7.15 (dd, 2H, J = 7.2, 2.4, and 2.0 Hz, Ar−H), 6.96 (dd, 2H, J = 7.2, 2.4, and 2.0 Hz, Ar−H), 5.99 (br s, 1H, −CH), 3.73 (s, 3H, Ar-OCH3) ppm. 13C NMR (100 MHz, DMSO-d6): δ = 164.42 (2 × CO), 163.89 (2 × CO), 157.92 (2C), 151.10 (2C), 150.69, 129.47, 127.82 (2C), 127.43, 124.80 (CF3), 123.24 (2C), 115.31 (2C), 114.96, 91.06 (2C), 55.89 (Ar−OCH3), 31.31 (CH) ppm. Elemental analysis calcd (%) for C23H16F3N5O5: C, 55.32; H, 3.23; N, 14.02. Found: C, 55.41; H, 3.25; N, 14.00. 5-(3-Bromophenyl)-10-(3-methoxyphenyl)-9,10-dihydropyrido[2,3-d:6,5-d′]dipyrimidine-2,4,6,8(1H,3H,5H,7H)-tetraone (4-10). Pinkish white solid; yield: 86% (219 mg; 0.5 mmol scale); mp = 175−177 °C. IR (KBr): νmax = 3364 (NH), 3165 (NH), 3123, 3000, 2839, 1711, 1680 (CONH), 1641, 1617, 1580, 1472, 1415, 1368, 1298, 1275, 1231, 1156, 1040, 895, 864, 840, 781, 684, 554, 449 cm−1. 1H NMR (400 MHz, DMSO-d6): δ = 10.22 (br s, 4H, 4 × −NH), 7.27 (d, 1H, J = 8.4 Hz, Ar−H), 7.23 (d, 1H, J = 9.2 Hz, Ar−H), 7.14 (br s, 1H, Ar−H), 7.12−7.10 (m, 1H, Ar−H), 7.02 (d, 1H, J = 7.6 Hz, Ar−H), 6.74 (dd, 1H, J = 8.0, 2.4, and 1.6 Hz, Ar−H), 6.72−6.71 (m, 1H, Ar−H), 6.69−6.67 (m, 1H, Ar−H), 5.89 (s, 1H, −CH), 3.72 (s, 3H, Ar-OCH3) ppm. 13C NMR (100 MHz, DMSOd6): δ = 168.39 (2 × CO), 165.44 (2 × CO), 160.64,151.17, 148.28, 138.16, 131.10, 130.33, 129.83, 128.07, 126.50, 124.99, 121.77, 113.36, 110.76, 106.94, 90.67, 79.70, 55.79 (Ar−OCH3), 31.37 (CH) ppm. Elemental analysis calcd (%) for C22H16BrN5O5: C, 51.78; H, 3.16; N, 13.72. Found: C, 51.81; H, 3.15; N, 13.79. 10-(4-(Trifluoromethyl)phenyl)-5-(3,4,5-trimethoxyphenyl)9,10-dihydropyrido[2,3-d:6,5-d′]dipyrimidine-2,4,6,8(1H,3H,5H,7H)-tetraone (4-14). Yellow solid; yield: 57% (159 mg; 0.5 mmol scale); mp = 258−260 °C. IR (KBr): νmax = 3239 (NH), 3013, 2944, 2836, 1659 (CONH), 1578, 1548, 1503, 1455, 1413, 1361, 1305, 1255, 1188, 1160, 1128, 995, 866, 788, 758, 675, 615, 508 cm−1. 1H NMR (400 MHz, DMSO-d6): δ = 11.38 (br s, 1H, −NH), 11.24 (br s, 1H, −NH), 11.13 (br s, 2H, 2 × −NH), 8.26 (d, 1H, J =

economy, and atom efficiency for the method amounts to up to 83.93%, 91.79%, and 84.02%, respectively. The calculated carbon efficiency (56.0−94.0%) for this process is also quite good. As reaction mass efficiency (RME) includes all reactant mass, yield, and atom economy, it is the most useful metric to determine the greenness of a process. Calculations of RME (51.79−83.93%) also indicate the excellent green credential of the present method. Similarly, process mass intensity (PMI) evaluation (74.26−41.28 g/g) also corroborate this fact. The calculated E-factors (g/g) are found to be in the range of 0.93− 0.19, which are indicative of the considerable greenness of this present method; the respective E-factor for each entry is shown in Tables 2 and 3. All other parameters have also been found to be in order. Respective data and their calculations for all the entries are given in the Supporting Information. In conclusion, we have developed a simple, catalyst-free, water-mediated, energy-efficient, conveniently practical, alternative, green method for easy access to a huge range of biologically interesting diverse and functionalized 5-alkyl/aryl/ heteroaryl-10-alkyl/aryl-2,8-dioxo/dithioxo-9,10-dihydropyrido[2,3-d:6,5-d′]dipyrimidine-4,6(1H,3H,5H,7H)-dione derivatives 4 (4-1−4-42) and 5,5′-(1,4-phenylene)bis(10-alkyl/aryl2,8-dioxo/dithioxo-9,10-dihydropyrido[2,3-d:6,5-d′]dipyrimidine-4,6(1H,3H,5H,7H)-dione) 4′ (4′-1−4′-8) from the one-pot pseudo-six component reaction between barbituric/ 2-thiobarbituric acids (1), substituted amines (2), and aldehydes (3) in aqueous medium at room temperature. The key advantages of this present protocol include mild reaction conditions at room temperature, avoidance of catalyst, use of water as reaction media, operational simplicity and clean reaction profiles, energy-efficiency, use of commercially available low-cost starting materials, ease of product isolation/ purification without the aid of tedious column chromatography, good to excellent yields, and high atom-economy and low Efactor, thereby satisfying the triple bottom line philosophy of green and sustainable chemistry.94 Moreover, reusability of the reaction media and the feasibility of gram-scale synthesis are the added advantages to this protocol. The present method satisfies green credentials. Keeping in view the synthetic importance of such biologically relevant multiheterocentric organic scaffolds, the present catalyst-free methodology with mild reaction conditions and operational simplicity offers the possibility of its use with cost-effective and environmentally friendlier methods for large-scale syntheses, as well.

■

EXPERIMENTAL SECTION

General Considerations. Infrared spectra were recorded using a Shimadzu (FT-IR 8400S) FT-IR spectrophotometer using KBr disc. 1 H and 13C NMR spectra were collected at 400 and 100 MHz, respectively, on a Bruker DRX spectrometer using CDCl3 and DMSOd6 as solvents. Elemental analyses were performed with a PerkinElmer 2400 Series II elemental analyzer instrument. Melting point was recorded on a Chemiline CL-725 melting point apparatus and is uncorrected. Thin Layer Chromatography (TLC) was performed using silica gel 60 F254 (Merck) plates. General Procedure for the Synthesis of 5-Alkyl/aryl/ heteroaryl-10-alkyl/aryl-2,8-dioxo/dithioxo-9,10dihydropyrido[2,3-d:6,5-d′]dipyrimidine-4,6(1H,3H,5H,7H)-diones (4) and 5,5′-(1,4-Phenylene)bis(10-alkyl/aryl-2,8-dioxo/ dithioxo-9,10-dihydropyrido[2,3-d:6,5-d′]dipyrimidine-4,6(1H,3H,5H,7H)-dione) (4′). A magnetic stir bar, barbituric/N,Ndimethylbarbituric/2-thiobarbituric acid (1; 0.5 mmol), amines (2; 0.5 mmol), and 2 mL distilled water were transferred to an oven-dried reaction tube in a sequential manner at ambient conditions, and the reaction mixture was then stirred for about 1 h. After then, the reaction 9500


Research Article


(m, 1H, Ar−H), 7.99−7.98 (m, 1H, Ar−H), 7.30 (d, 1H, J = 8.4 Hz, Ar−H), 7.22 (dd, 1H, J = 8.4, 2.8, and 2.4 Hz, Ar−H), 7.17 (dd, 1H, J = 6.8, 2.0, and 0.8 Hz, Ar−H), 6.63 (d, 1H, J = 8.8 Hz, Ar−H), 4.78 (br s, 1H, −CH), 3.43 (s, 3H, −NCH3), 3.38−3.35 (m, 3H, −NCH3), 3.31 (s, 3H, −NCH3), 2.51 (s, 3H, −NCH3), 2.41 (s, 3H, −SCH3) ppm. 13C NMR (100 MHz, CDCl3): δ = 191.92 (CHO), 164.86 (CO), 158.11 (CO), 157.98 (CO), 157.35 (CO), 133.72, 132.35, 131.18 (2C), 130.19, 129.32, 129.23, 128.42, 127.67, 127.59, 127.55, 121.85, 121.82, 121.79, 115.93 (2C), 39.53 (2 × NCH3), 29.30 (CH), 28.64 (2 × NCH3), 18.91 (SCH3) ppm. Elemental analysis calcd (%) for C27H25N5O5S: C, 61.00; H, 4.74; N, 13.17. Found: C, 60.92; H, 4.72; N, 13.20. 5-(4-Bromophenyl)-2,8-dithioxo-10-(4-(trifluoromethoxy)phenyl)-2,3,7,8,9,10-hexahyd ropyrido[2,3-d:6,5-d′]dipyrimidine-4,6(1H,5H)-dione (4-30). White solid; yield: 78% (232 mg; 0.5 mmol scale); mp = 194−196 °C. IR (KBr): νmax = 3101 (NH), 3010, 2920, 2899, 1665 (CONH), 1637, 1630, 1619, 1553, 1431, 1378 (CS), 1300, 1263 (CS), 1220, 1171, 1137, 1006, 928, 868, 829, 785, 676, 611, 582, 553, 528, 420 cm−1. 1H NMR (400 MHz, DMSO-d6): δ = 11.63 (br s, 4H, 4 × −NH), 7.36−7.32 (m, 4H, Ar− H), 7.21 (dd, 2H, J = 7.6 and 2.0 Hz, Ar−H), 6.94 (dd, 2H, J = 8.4, 1.2, and 0.8 Hz, Ar−H), 5.91 (s, 1H, −CH) ppm. 13C NMR (100 MHz, DMSO-d6): δ = 173.36 (2 × CS), 163.49 (CO), 163.43 (CO), 152.63, 143.10 (2C), 136.90, 130.93 (OCF3), 129.37 (2C), 122.82 (3C), 122.37 (2C), 119.32, 118.22 (2C), 95.92 (2C), 30.66 (CH) ppm. Elemental analysis calcd (%) for C22H13BrF3N5O3S2: C, 44.31; H, 2.20; N, 11.74. Found: C, 44.37; H, 2.19; N, 11.79. 5-(Benzo[d][1,3]dioxol-5-yl)-10-(4-(4-chlorophenoxy)phenyl)-2,8-dithioxo-2,3,7,8,9,10-hexahydropyrido[2,3-d:6,5d′]dipyrimidine-4,6(1H,5H)-dione (4-34). Golden yellow solid; yield: 74% (223 mg; 0.5 mmol scale); mp = 210−212 °C. IR (KBr): νmax = 3205 (NH), 3170, 2892, 1678 (CONH), 1618, 1510, 1487, 1455, 1394, 1318 (CS), 1296, 1273 (CS), 1254, 1210, 1184, 1157, 1035, 929, 885, 797, 664, 602, 527, 493 cm−1. 1H NMR (400 MHz, DMSO-d6): δ = 11.60 (br s, 4H, 4 × −NH), 7.47−7.37 (m, 4H, Ar−H), 7.13−7.07 (m, 4H, Ar−H), 6.69 (br s, 1H, Ar−H), 6.49 (br s, 2H, Ar−H), 6.20 (br s, 1H, −CH), 5.91 (br s, 2H, −OCH2O−) ppm; 13 C NMR (100 MHz, DMSO-d6): δ = 173.19 (2 × CS), 163.54 (CO), 163.47 (CO), 156.03, 155.58, 147.32, 145.08, 137.46, 130.47 (2C), 128.21 (2C), 125.12 (2C), 121.00 (2C), 120.09 (2C), 119.66 (2C), 107.85, 107.53 (2C), 100.88 (OCH2O), 96.39 (2C), 30.66 (CH) ppm. Elemental analysis calcd (%) for C28H18ClN5O5S2: C, 55.67; H, 3.00; N, 11.59. Found: C, 55.74; H, 3.01; N, 11.62. 10-Cyclohexyl-5-isopropyl-2,8-dithioxo-2,3,7,8,9,10hexahydropyrido[2,3-d:6,5-d′]dipyrimidine-4,6(1H,5H)-dione (4-38). White solid; yield: 74% (150 mg; 0.5 mmol scale); mp = 201− 203 °C. IR (KBr): νmax = 3180 (NH), 3109, 3089, 2953, 2865, 1662 (CONH), 1629, 1596, 1520, 1446, 1352 (CS), 1298, 1238 (CS), 1192, 1139, 1013, 866, 754, 621, 555, 504, 453 cm−1. 1H NMR (400 MHz, DMSO-d6): δ = 11.46 (br s, 2H, 2 × −NH), 11.23 (br s, 2H, 2 × −NH), 4.18 (d, 1H, J = 11.6 Hz, −CH), 2.99−2.96 (m, 1H, N(−CH)), 1.89−1.87 (m, 2H, −CH2−), 1.72−1.68 (m, 2H, −CH2−), 1.59−1.57 (m, 1H, −CH), 1.31−1.07 (m, 6H, 3 × −CH2−), 0.71 (d, 6H, J = 6.8 Hz, 2 × −CH3) ppm. 13C NMR (100 MHz, DMSO-d6): δ = 172.74 (2 × CS), 164.09 (2 × CO), 162.39 (2C), 96.58 (2C), 49.83 (N-CH), 34.09 (CH), 30.81 (2 × CH2), 26.50 (CH(CH3)2), 25.00 (2 × CH2), 24.20 (2 × CH3), 21.83 (CH2) ppm. Elemental analysis calcd (%) for C18H23N5O2S2: C, 53.31; H, 5.72; N, 17.27. Found: C, 53.27; H, 5.70; N, 17.21. 2-(5-(Naphthalen-2-yl)-4,6-dioxo-2,8-dithioxo1,2,3,4,6,7,8,9-octahydropyrido[2,3-d:6,5-d′]dipyrimidin10(5H)-yl)propanoic Acid (4-39). White solid; yield: 70% (168 mg; 0.5 mmol scale); mp = 166−168 °C. IR (KBr): νmax = 3360 (OH), 3204 (NH), 3040, 2967, 2899, 2834, 1741,1709 (COOH), 1641 (CONH), 1519, 1463, 1370 (C = S), 1328, 1245 (C = S), 1155, 1104, 1041, 981, 925, 865, 855, 760, 685, 648,585, 534 cm−1. 1H NMR (400 MHz, DMSO-d6): δ = 9.91 (s, 2H, 2 × −NH), 9.77 (s, 2H, 2 × −NH), 9.37 (br s, 1H, Ar−H), 8.16 (br s, 2H, Ar−H), 7.05 (d, 2H, J = 8.4 Hz, Ar−H), 6.71 (d, 2H, J = 8.4 Hz, Ar−H), 4.15−4.12 (m, 1H, −CH), 4.09−4.07 (m, 1H, −CH(CH3)), 0.71 (d, 3H, J = 6.4 Hz, −CH3) ppm. 13C NMR (100 MHz, DMSO-d6): δ = 171.16 (2 × CS),

6.0 Hz, Ar−H), 7.83 (d, 2H, J = 6.0 Hz, Ar−H), 7.31 (d, 1H, J = 6.8 Hz, Ar−H), 6.66 (d, 2H, J = 7.2 Hz, Ar−H), 6.42 (br s, 1H, −CH), 3.83 (s, 3H, Ar−OCH3), 3.82 (s, 3H, Ar−OCH3), 3.80 (s, 3H, Ar− OCH3) ppm. 13C NMR (100 MHz, DMSO-d6): δ = 168.22 (2 × CO), 164.20 (2 × CO), 162.56, 155.69, 152.63, 152.54, 152.42, 152.23, 152.12, 150.60, 142.42, 128.00, 126.71 (2C), 117.74, 113.77 (2C), 113.03 (2C), 60.76 (Ar−OCH3), 60.39 (Ar−OCH3), 56.48 (Ar− OCH3), 32.31 (CH) ppm. Elemental analysis calcd (%) for C25H20F3N5O7: C, 53.67; H, 3.60; N, 12.52. Found: C, 53.70; H, 3.59; N, 12.49. 3-(4-Hydroxyphenyl)-2-(5-(4-nitrophenyl)-2,4,6,8-tetraoxo1,2,3,4,6,7,8,9-octahydropyrido[2,3-d:6,5-d′]dipyrimidin10(5H)-yl)propanoic Acid (4−18). White solid; yield: 70% (187 mg; 0.5 mmol scale); mp = 193−195 °C. IR (KBr): νmax = 3373 (OH), 3203 (NH), 3136, 3016, 2936, 2900, 2871, 1709 (COOH), 1680 (CONH), 1630, 1589, 1510, 1455, 1349, 1284, 1220, 1108, 1043, 928, 851, 776, 733, 663, 581, 540, 530, 434 cm−1. 1H NMR (400 MHz, DMSO-d6): δ = 10.14 (br s, 4H, 4 × −NH), 9.38 (br s, 1H, Ar− OH), 8.06 (d, 2H, J = 8.8 Hz, Ar−H), 7.27 (d, 2H, J = 8.4 Hz, Ar−H), 7.04 (d, 2H, J = 8.4 Hz, Ar−H), 6.71 (d, 2H, J = 8.4 Hz, Ar−H), 6.07 (s, 1H, −CH), 4.09 (t, 1H, J = 6.4 and 6.0 Hz, −CH(COOH)CH2−), 2.99−2.96 (m, 2H, −CH2−) ppm. 13C NMR (100 MHz, DMSO-d6): δ = 171.20 (COOH), 157.21 (2 × CO), 155.08 (2 × CO), 151.26 (2C), 145.53 (2C), 131.09 (2C), 128.45 (2C), 125.25 (2C), 123.44 (2C), 115.99 (2C), 91.04 (2C), 54.07 (CH(COOH)), 35.69 (CH), 31.88 (CH2) ppm. Elemental analysis: calcd (%) for C24H18N6O9: C, 53.94; H, 3.39; N, 15.73. Found: C, 53.88; H, 3.40; N, 15.77. 4-(2,4,6,8-Tetraoxo-10-(4-(trifluoromethyl)phenyl)1,2,3,4,5,6,7,8,9,10-decahydropyrido[2,3-d:6,5-d′]dipyrimidin5-yl)benzaldehyde (4-20). Yellow solid; yield: 77% (191 mg; 0.5 mmol scale); mp = 160−162 °C. IR (KBr): νmax = 3204 (NH), 3097, 2853, 1701 (CHO), 1679 (CONH), 1578, 1445, 1412, 1337, 1305, 1217, 1168, 1121, 1068, 1019, 982, 814, 688, 640, 593, 546, 521, 456 cm−1. 1H NMR (400 MHz, DMSO-d6): δ = 11.46 (s, 2H, 2 × −NH), 11.31 (s, 2H, 2 × −NH), 10.47 (br s, 1H, −CHO), 8.32−8.24 (m, 2H, Ar−H), 8.06 (br s, 2H, Ar−H), 7.32 (d, 2H, J = 8.8 Hz, Ar−H), 6.67 (d, 2H, J = 8.8 Hz, Ar−H), 5.90 (br s, 1H, −CH) ppm. 13C NMR (100 MHz, DMSO-d6): δ = 193.28 (CHO), 163.63 (2 × CO), 161.93 (2 × CO), 153.47 (2C), 152.16, 150.67 (2C), 136.20, 132.59, 132.36 (2C), 129.07, 126.73 (2C), 126.69 (2C), 120.97 (2C), 113.80 (CF3), 32.45 (CH) ppm. Elemental analysis calcd (%) for C23H14F3N5O5: C, 55.54; H, 2.84; N, 14.08. Found: C, 55.51; H, 2.83; N, 14.10. 5-(4-Fluorophenyl)-1,3,7,9-tetramethyl-10-(2,4,5-trihydroxy-6-(hydroxymethyl)tetrahydro-2H-pyran-3-yl)-9,10dihydropyrido[2,3-d:6,5-d′]dipyrimidine-2,4,6,8(1H,3H,5H,7H)tetraone (4-25). White solid; yield: 65% (183 mg; 0.5 mmol scale); mp = 125−126 °C. IR (KBr): νmax = 3440−3360 (OH), 3072, 3001, 2963, 2930, 2849, 1692 (CONCH3), 1665 (CONCH3), 1513, 1453, 1423, 1376, 1276, 1227, 1136, 1093, 1041, 984, 841, 790, 756, 639, 597, 520, 469, 451 cm−1. 1H NMR (400 MHz, CDCl3): δ = 7.45−7.42 (m, 1H, Ar−H), 7.15−7.11 (m, 1H, Ar−H), 7.02−6.97 (m, 2H, Ar− H), 5.59 (s, 1H, −CH), 4.38 (t, 1H, J = 7.2 and 6.8 Hz, −CH(CH2OH)), 4.29 (d, 2H, J = 6.4 Hz, −CH(CH2OH)), 3.48 (br s, 1H, −OH), 3.44 (s, 4H, 4 × −CH(OH)), 3.42 (br s, 1H, −OH), 3.38 (br s, 1H, −OH), 3.36 (s, 6H, 2 × −NCH3), 3.31 (br s, 1H, −OH), 3.24 (s, 3H, −NCH3), 3.19 (s, 3H, −NCH3) ppm. 13C NMR (100 MHz, CDCl3): δ = 167.80 (CO), 166.79 (CO), 164.70 (CO), 163.35 (CO), 150.56, 136.85, 131.14, 128.18, 128.09, 115.50, 115.48, 115.27, 93.42 (2C), 51.25 (4 × CH(OH)), 45.75 (N−CH), 34.04 (CH2(OH)), 31.07 (CH), 29.47 (NCH3), 29.15 (NCH3), 28.99 (NCH3), 28.89 (NCH3) ppm. Elemental analysis calcd (%) for C25H28FN5O9: C, 53.47; H, 5.03; N, 12.47. Found: C, 53.52; H, 5.01; N, 12.44. 4-(1,3,7,9-Tetramethyl-10-(4-(methylthio)phenyl)-2,4,6,8tetraoxo-1,2,3,4,5,6,7,8,9,10-decahydropyrido[2,3-d:6,5-d′]dipyrimidin-5-yl)benzaldehyde (4-26). Yellow solid; yield: 69% (183 mg; 0.5 mmol scale); mp = 172−174 °C. IR (KBr): ννmax = 3078, 2954, 1680 (CHO and CONCH3), 1583, 1573, 1432, 1379, 1306, 1257, 1152, 1090, 962, 881, 835, 798, 751, 638, 552, 511, 484, 442 cm−1. 1H NMR (400 MHz, CDCl3): δ = 10.08 (s, 1H, −CHO), 8.58−8.52 (m, 1H, Ar−H), 8.12 (d, 1H, J = 8.4 Hz, Ar−H), 8.07−8.02 9501


Research Article

ACS Sustainable Chemistry & Engineering 169.44 (−COOH), 166.18 (2 × CO), 163.52 (2C), 162.76, 157.06, 151.09 (2C), 130.96 (2C), 125.19, 119.69, 115.85 (2C), 91.69 (2C), 54.00 (N-CH), 35.58 (CH), 22.04 (CH3) ppm. Elemental analysis calcd (%) for C22H17N5O4S2: C, 55.10; H, 3.57; N, 14.60. Found: C, 54.94; H, 3.56; N, 14.57. 4 - ( 1 0 - ( 4 - M e t h ox y p h e n y l ) - 4 , 6 - d i ox o - 2 ,8 - d i t h i o x o 1,2,3,4,5,6,7,8,9,10-decahydropyrido[2,3-d: 6,5-d′]dipyrimidin5-yl)benzaldehyde (4-40). Whitish gray solid; yield: 81% (199 mg; 0.5 mmol scale); mp = 201−203 °C. IR (KBr): νmax = 3120 (NH), 3074, 2886, 1686 (CONH), 1638, 1602, 1544, 1509, 1441, 1376 (C S), 1302, 1256 (CS), 1218, 1171, 1137, 1033, 1009, 926, 874, 827, 771, 673, 611, 554, 509, 431 cm−1. 1H NMR (400 MHz, DMSO-d6): δ = 11.63 (br s, 4H, 4 × −NH), 9.89 (s, 1H, −CHO), 7.72 (d, 2H, J = 8.0 Hz, Ar−H), 7.28 (dd, 2H, J = 6.4 and 2.0 Hz, Ar−H), 7.21 (d, 2H, J = 8.4 Hz, Ar−H), 7.03 (dd, 2H, J = 7.2 and 2.0 Hz, Ar−H), 6.04 (s, 1H, −CH), 3.75 (s, 3H, Ar-OCH3) ppm. 13C NMR (100 MHz, DMSO-d6): δ = 193.12 (CHO), 173.57 (2 × CS), 159.47 (2 × CO), 151.83, 134.31, 130.50, 129.87, 128.06, 127.89, 125.05 (2C), 124.37, 123.14, 115.52 (2C), 115.30, 115.11, 95.99 (2C), 56.07 (Ar-OCH3), 31.76(CH) ppm. Elemental analysis calcd (%) for C23H17N5O4S2: C, 56.20; H, 3.49; N, 14.25. Found: C, 56.27; H, 3.47; N, 14.22. 5,5′-(1,4-Phenylene)bis(10-(4-methoxyphenyl)-9,10dihydropyrido[2,3-d:6,5-d′]dipyrimidine-2,4,6,8(1H,3H,5H,7H)tetraone) (4′-1). Gray solid; yield: 83% (163 mg; 0.25 mmol scale); mp = 155−157 °C. IR (KBr): νmax = 3160 (NH), 3081, 2912, 1699 (CONH), 1673 (CONH), 1668, 1615, 1584, 1511, 1440, 1379, 1307, 1252, 1211, 1175, 1122, 1067, 1023, 954, 824, 799, 740, 637, 508, 433 cm−1. 1H NMR (400 MHz, DMSO-d6): δ = 11.12 (br s, 2H, 2 × −NH), 10.09 (br s, 6H, 6 × −NH), 8.05 (d, 1H, J = 8.4 Hz, Ar-H), 7.24 (d, 1H, J = 8.8 Hz, Ar-H), 7.14−7.06 (m, 4H, Ar-H), 6.91 (dd, 4H, J = 8.2 and 0.4 Hz, Ar-H), 6.77−7.68 (br s, 2H, Ar-H), 6.01 (br s, 1H, −CH), 5.82 (br s, 1H, −CH), 3.71 (s, 6H, 2 × Ar-OCH3) ppm. 13 C NMR (100 MHz, DMSO-d6): δ = 168.38 (4 × CO), 164.28 (2 × CO), 157.12 (2 × CO), 152.27 (2C), 151.26, 151.23 (2C), 150.78, 140.91 (2C), 134.59, 127.24 (2C), 126.32 (2C), 124.52, 122.84 (2C), 122.43 (2C), 122.30, 115.39 (4C), 114.98, 91.16 (2C), 56.01 (2 × Ar−OCH3), 31.92 (2 × CH) ppm. Elemental analysis calcd (%) for C38H28N10O10: C, 58.16; H, 3.60; N, 17.85. Found: C, 58.12; H, 3.61; N, 17.83. 5,5′-(1,4-Phenylene)bis(1,3,7,9-tetramethyl-10-(4(methylthio)phenyl)-9,10-dihydropyrido[2,3-d:6,5-d′]dipyrimidine-2,4,6,8(1H,3H,5H,7H)-tetraone) (4′-4). Pale yellow solid; yield: 82% (190 mg; 0.25 mmol scale); mp = 155−157 °C. IR (KBr): νmax = 3078, 3007, 1695 (CONCH3), 1675 (CONCH3), 1615, 1581, 1570, 1494, 1467, 1435, 1375, 1306, 1255, 1208, 1119, 1068, 950, 922, 800, 753, 741, 720, 637, 580, 509, 431, 425 cm−1. 1H NMR (400 MHz, DMSO-d6): δ = 8.01 (d, 2H, J = 8.4 Hz, Ar-H), 7.22 (dd, 4H, J = 6.6, 2.0, and 1.6 Hz, Ar-H), 7.16 (d, 2H, J = 8.0 Hz, Ar-H), 6.94 (d, 4H, J = 8.4 Hz, Ar-H), 6.31 (br s, 2H, 2 × −CH), 3.16 (s, 12H, 4 × −NCH3), 3.11 (s, 12H, 4 × −NCH3), 2.41 (s, 6H, 2 × −SCH3) ppm. 13C NMR (100 MHz, DMSO-d6): δ = 166.53 (4 × CO), 163.23 (2 × CO), 163.14 (2 × CO), 151.97 (3C), 151.74 (3C), 134.31 (3C), 129.79 (3C), 129.33 (4C), 127.29 (4C), 119.94 (4C), 91.27 (2C), 29.21 (2 × CH),28.59 (4 × NCH3), 28.38 (4 × NCH3), 17.02 (2 × SCH3) ppm. Elemental analysis calcd (%) for C46H44N10O8S2: C, 59.47; H, 4.77; N, 15.08. Found: C, 59.52; H, 4.78; N, 15.10. 5,5′-(1,4-Phenylene)bis(2,8-dithioxo-10-(4-(trifluoromethyl)phenyl)-2,3,7,8,9,10-he xahydropyrido[2,3- d:6,5-d′]dipyrimidine-4,6(1H,5H)-dione) (4′-7). Whitish orange solid; yield: 80% (185 mg; 0.25 mmol scale); mp = 198−200 °C. IR (KBr): νmax = 3150 (NH), 3055, 2879, 1636 (CONH), 1630, 1619, 1544, 1432, 1371 (CS), 1324, 1226 (CS), 1201, 1176, 1138, 1068, 1014, 869, 834, 770, 750, 536, 501, 438 cm−1. 1H NMR (400 MHz, DMSO-d6): δ = 11.76 (br s, 8H, 8 × −NH), 7.39 (d, 4H, J = 8.4 Hz, Ar-H), 6.80 (d, 6H, J = 4.0 Hz, Ar-H), 6.78 (s, 2H, Ar-H), 5.83 (s, 2H, 2 × −CH) ppm. 13C NMR (100 MHz, DMSO-d6): δ = 173.33 (4 × CS), 163.61 (4 × CO), 162.78 (2C), 150.17, 139.09 (2C), 132.03, 126.97 (4C), 126.93 (4C), 126.52 (2 × CF3), 124.39 (4C), 115.51 (4C), 96.68 (4C), 30.92 (2 × CH) ppm. Elemental analysis calcd (%) for

C38H22F6N10O4S4: C, 49.35; H, 2.40; N, 15.14. Found: C, 49.39; H, 2.39; N, 15.11. Isolation and Characterization of a Representative Enamine Intermediate [6-((4-Bromophenyl)amino)pyrimidine-2,4(1H,3H)-dione] 7-5. An oven-dried sealed tube was charged with a magnetic stir bar, barbituric acid (1-5; 0.5 mmol), 4-bromoaniline (25; 0.5 mmol) and 2 mL of distilled water in a sequential manner at ambient conditions, and the reaction mixture was then stirred for 15 h. The progress of the reaction was monitored by TLC. On completion of reaction, a white solid mass precipitated out which was filtered off and washed with cold aqueous ethanol to obtain pure 6-((4bromophenyl)amino)pyrimidine-2,4(1H,3H)-dione (7-5): Yield: 77% (109 mg; 0.5 mmol scale); mp 171−173 °C. IR (KBr): νmax = 3117 (NH), 3045, 2983, 2829, 1697, and 1687 (CONH), 1609, 1585, 1480, 1403, 1370, 1286, 1207, 1165, 1077, 1015, 879, 834, 810, 786, 686, 632, 535, 487 cm−1. 1H NMR (400 MHz, DMSO-d6): δ = 11.11 (s, 2H, 2 × −NH), 7.12 (d, 2H, J = 8.8 Hz, Ar-H), 6.51 (d, 2H, J = 8.8 Hz, Ar-H), 5.33 (br s, 1H, vinylic H), 3.46 (s, 1H, −NH) ppm. 13C NMR (100 MHz, DMSO-d6): δ = 168.21 (2 × CO), 152.10, 148.48 (2C), 131.77 (2C), 116.25 (2C), 106.51 ppm. Elemental analysis calcd (%) for C10H8BrN3O2: C, 42.58; H, 2.86; N, 14.90. Found: C, 42.52; H, 2.87; N, 14.87. Isolation and Characterization of a Representative Chalcone Intermediate [4-((2,4,6-trioxotetrahydropyrimidin-5(2H)ylidene)methyl)benzonitrile] 9-5. An oven-dried sealed tube was charged with a magnetic stir bar, barbituric acid (1-5; 0.5 mmol), 4cyanobenzaldehyde (3-5; 0.5 mmol), and 2 mL of distilled water in a sequential manner at ambient conditions, and the reaction mixture was then stirred for 12 h. The progress of the reaction was monitored by TLC. On completion of reaction, a white solid mass precipitated out which was filtered off and washed with cold aqueous ethanol to obtain pure 4-((2,4,6-trioxotetrahydropyrimidin-5(2H)-ylidene)methyl)benzonitrile (9-5): yield: 71% (86 mg; 0.5 mmol scale); mp 223− 225 °C. IR (KBr): νmax = 3224 (NH), 3060, 2845, 2232 (CN), 1703− 1667 (CONH), 1643 (CC), 1581, 1579, 1548, 1445, 1408, 1342, 1314, 1291, 1217, 1202, 1117, 1075, 1027, 986, 965, 849, 804, 738, 681, 656, 633, 557, 521, 465, 428 cm−1. 1H NMR (400 MHz, DMSOd6): δ = 11.47 (br s, 1H, −NH), 11.29 (br s, 1H, −NH), 8.28 (s, 1H, vinylic H), 7.99 (d, 2H, J = 8.4 Hz, Ar-H), 7.89 (d, 2H, J = 8.0 Hz, ArH) ppm. 13C NMR (100 MHz, DMSO-d6): δ = 163.22 (CO), 161.65 (CO), 152.15 (CO), 150.65, 138.39, 132.40 (2C), 131.99 (2C), 122.34, 118.99 (CN), 113.15 ppm. Elemental analysis calcd (%) for C12H7N3O3: C, 59.75; H, 2.93; N, 17.42. Found: C, 59.80; H, 2.92; N, 17.44.

■

ASSOCIATED CONTENT

S Supporting Information *

The Supporting Information is available free of charge on the ACS Publications website at DOI: 10.1021/acssuschemeng.7b02696. Spectral and analytical data along with scanned copies of respective 1H NMR and 13C NMR spectra for all the synthesized compounds (4−1−4-42 and 4′-1−4′-8) along with those for enamine (7-5) and chalcone (9-5) intermediates. Working formulas for calculations of green metrics and respective calculated data for all the synthesized compounds (PDF)

■

AUTHOR INFORMATION

Corresponding Author

*E-mail: [email protected]; goutam.brahmachari@ visva-bharati.ac.in. Tel.: 91-3463-264017 (G.B.). ORCID

Goutam Brahmachari: 0000-0001-9925-6281 Notes

The authors declare no competing financial interest. 9502


Research Article


■

bioactive pyrimidine derivatives. Bioorg. Med. Chem. 2007, 15, 6227− 6235. (18) Thakur, R.; Mohan, R.; Kidwai, M. Ecofriendly synthesis of novel antifungal (thio)barbituric acid derivatives. Acta Chim. Solv. 2005, 52, 88−92. (19) Tozkoparan, B.; Ertan, M.; Kelicen, P.; Demirdamar, R. Synthesis and anti-inflammatory activities of some thiazolo[3,2a]pyrimidine derivatives. Farmaco 1999, 54, 588−593. (20) Andreani, A.; Rambaldi, M.; Locatelli, A.; Leoni, A.; Bossa, R.; Chiericozzi, M.; Galatulas, I.; Salvatore, P. Synthesis of lactams with potential cardiotonic activity. Eur. J. Med. Chem. 1993, 28, 825−829. (21) Taylor, E. C.; Patel, H. H. Synthesis of pyrazolo 3,4-dpyrimidine analogues of the potent agent N-4−2-2-amino-4 3H-oxo-7H-pyrrolo 2,3-dpyrimidin-5-yl ethylbenzoyl-L-glutamic acid (LY231514). Tetrahedron 1992, 48, 8089−8100. (22) Behalo, M. S.; Mele, G. Synthesis and evaluation of pyrido[2,3d]pyrimidine and 1,8- naphthyridine derivatives as potential antitumor agents. J. Heterocycl. Chem. 2017, 54, 295−300. (23) Fares, M.; Abou-Seri, S. M.; Abdel-Aziz, H. A.; Abbas, S. E.-S.; Youssef, M. M.; Eladwy, R. A. Synthesis and antitumor activity of pyrido [2,3-d]pyrimidine and pyrido[2,3-d] [1,2,4]triazolo[4,3-a]pyrimidine derivatives that induce apoptosis through G1 cell-cycle arrest. Eur. J. Med. Chem. 2014, 83, 155−166. (24) Zhang, H.-J.; Wang, S.-B.; Wen, X.; Li, J. Z.; Quan, Z. S. Design, synthesis, and evaluation of the anticonvulsant and antidepressant activities of pyrido[2,3-d]pyrimidine derivatives. Med. Chem. Res. 2016, 25, 1287−1298. (25) Saikia, L.; Das, B.; Bharali, P.; Thakur, A. J. A convenient synthesis of novel 5-aryl- pyrido[2,3-d]pyrimidines and screening of their preliminary antibacterial properties. Tetrahedron Lett. 2014, 55, 1796−1801. (26) Satasia, S. P.; Kalaria, P. N.; Raval, D. K. Catalytic regioselective synthesis of pyrazole based pyrido[2,3-d]pyrimidine-diones and their biological evaluation. Org. Biomol. Chem. 2014, 12, 1751−1758. (27) Abu-Zied, K. M.; Mohamed, T. K.; Al-Duiaj, O. K.; Zaki, M. E. A. A simple approach to fused pyrido[2,3-d]pyrimidines incorporating khellinone and trimethoxyphenyl moieties as new scaffolds for antibacterial and antifungal agents. Heterocycl. Commun. 2014, 20, 93−102. (28) Elsaedany, S. K.; Zein, M. A.; Abedel Rehim, E. M.; Keshk, R. M. Synthesis, antimicrobial, and cytotoxic activities evaluation of Some new pyrido[2,3-d]pyrimidines. J. Heterocycl. Chem. 2016, 53, 1534−1543. (29) Moreno, E.; Plano, D.; Lamberto, I.; Font, M.; Encío, I.; Palop, J. A.; Sanmartín, C. Sulfur and selenium derivatives of quinazoline and pyrido[2,3-d]pyrimidine: Synthesis and study of their potential cytotoxic activity in vitro. Eur. J. Med. Chem. 2012, 47, 283−298. (30) Toobaei, Z.; Yousefi, R.; Panahi, F.; Shahidpour, S.; Nourisefat, M.; Doroodmand, M. M.; Khalafi-Nezhad, A. Synthesis of novel polyhydroxyl functionalized acridine derivatives as inhibitors of αglucosidase and α-amylase. Carbohydr. Res. 2015, 411, 22−32. (31) Suresh, T.; Kumar, R. N.; Mohan, P. S. Synthesis and antibacterial activities of l,2,3,4,6,7,8,9-octahydro-l,3,7,9-tetraphenyl 5pyrrolo-2,4,6,8-tetraoxo-10H, 5H pyrido[2,3-d; 6,5-d′]dipyrimidine. Heterocycl. Commun. 2003, 9, 203−208. (32) Naeimi, H.; Didar, A.; Rashid, Z.; Zahraie, Z. Sonochemical synthesis of pyrido[2,3- d:6,5-d′]-dipyrimidines catalyzed by [HNMP]+[HSO4]− and their antimicrobial activity studies. J. Antibiot. 2017, 70, 845. (33) Nasr, M. N.; Gineinah, M. M. Pyrido[2, 3-d]pyrimidines and pyrimido[5′,4′:5, 6]pyrido[2,3-d]pyrimidines as new antiviral agents: synthesis and biological activity. Arch. Pharm. 2002, 335, 289−295. (34) Nagamatsu, T.; Yamato, H.; Ono, M.; Takarada, S.; Yoneda, F. Autorecycling oxidation of alcohols catalysed by pyridodipyrimidines as an NAD(P)+ model. J. Chem. Soc., Perkin Trans. 1 1992, 0, 2101− 2109. (35) Verma, C.; Olasunkanmi, L. O.; Ebenso, E. E.; Quraishi, M. A.; Obot, I. B. Adsorption behavior of glucosamine-based, pyrimidinefused heterocycles as green corrosion inhibitors for mild steel:

ACKNOWLEDGMENTS This paper is dedicated to Professor Asit K. Chakraborti on the occasion of his 63rd birthday. Financial support (Grant No. EMR/2014/001220) from the Science and Engineering Research Board (SERB), Department of Science & Technology (DST), Government of India, New Delhi, is gratefully acknowledged. I.K. is thankful to the UGC, New Delhi, for awarding him a junior research fellowship. The authors are also thankful to DST-FIST Program, and Department of Chemistry, Visva-Bharati University, for infrastructural facilities.

■

REFERENCES

(1) Martins, P.; Jesus, J.; Santos, S.; Raposo, L. R.; Roma-Rodrigues, C.; Baptista, P. V.; Fernandes, A. R. Heterocyclic anticancer compounds: Recent advances and the paradigm shift towards the use of nanomedicine’s tool box. Molecules 2015, 20, 16852−16891. (2) Vitaku, E.; Smith, D. T.; Njardarson, J. T. Analysis of the structural diversity, substitution patterns, and frequency of nitrogen heterocycles among U.S. FDA approved pharmaceuticals. J. Med. Chem. 2014, 57, 10257−10274. (3) Lamberth, C.; Dinges, J. The significance of heterocycles for pharmaceuticals and agrochemicals (Chapter 1). In Bioactive Heterocyclic Compound Classes: Agrochemicals; Lamberth, C., Dinges, J., Eds.; Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, Germany, 2012. (4) Murphree, S. S.; Gribble, G.; Joule, J. Heterocyclic Dyes: Preparation, properties, and applications (Chapter 2). Progress in Heterocyclic Chemistry 2011, 22, 21−58. (5) Brahmachari, G. Handbook of Pharmaceutical Natural Products; Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, Germany, 2010; Vols. 1 and 2. (6) Katritzky, A. R. Handbook of Heterocyclic Chemistry; Pergamon Press: New York, 1985. (7) Brahmachari, G. Green Synthetic Approaches for Biologically Relevant Heterocycles; Elsevier: Amsterdam, The Netherlands, 2015. (8) Sharma, P.; Rane, N.; Gurram, V. K. Synthesis and QSAR studies of pyrimido[4,5- d]pyrimidine-2,5-dione derivatives as potential antimicrobial agents. Bioorg. Med. Chem. Lett. 2004, 14, 4185−4190. (9) Heber, D.; Heers, C.; Ravens, U. Positive inotropic activity of 5amino-6-cyano-1,3- dimethyl-1,2,3,4-tetrahydropyrido[2,3-d]pyrimidine-2,4-dione in cardiac muscle from guinea-pig and man. Part 6: Compounds with positive inotropic activity. Pharmazie 1993, 48, 537−541. (10) Parakash, L.; Shaihla, M.; Mital, R. L. Synthesis and antibacterial activity of some new pyrido[2,3-d]pyrimidine derivatives. Pharmazie 1989, 44, 490. (11) Elnagdi, M. H.; Elmoghayar, M. R. H.; Elgemeie, G. E. H. Chemistry of pyrazolopyrimidines. Adv. Heterocycl. Chem. 1987, 41, 319−376. (12) Suzuki, N. Synthesis of antimicrobial agents. V.1) synthesis and antimicrobial activities of some heterocyclic condensed 1,8-naphthyridine derivatives. Chem. Pharm. Bull. 1980, 28, 761−768. (13) Rathee, P.; Tonk, R. K.; Dalal, A.; Ruhil, M. K.; Kumar. Synthesis and application of thiobarbituric acid derivatives as antifungal agents. A. Cell. Mol. Biol. 2016, 62, 141. (14) Mobinikhaledi, A.; Kalhor, M. Synthesis and biological activity of some oxo- and thioxopyrimidines. Int. J. Drug Dev. Res. 2010, 2, 268−272. (15) Sachar, A.; Gupta, P.; Gupta, S.; Sharma, R. L. Synthesis of some novel barbituric acid and 1,3-cyclohexanedione based condensed heterocycles. Indian J. Chem. 2009, 48B, 1187−1194. (16) Habib, N. S.; Soliman, R.; El-Tombary, A. A.; El-Hawash, S. A.; Shaaban, O. G. Synthesis of thiazolo[4,5-d]pyrimidine derivatives as potential antimicrobial agents. Arch. Pharmacal Res. 2007, 30, 1511− 1520. (17) Mohamed, N. R.; El-Saidi, M. M.; Ali, Y. M.; Elnagdi, M. H. Utility of 6-amino-2- thiouracil as a precursor for the synthesis of 9503


Research Article

ACS Sustainable Chemistry & Engineering experimental and theoretical studies. J. Phys. Chem. C 2016, 120, 11598−11611. (36) Verma, C.; Quraishi, M. A.; Kluza, K.; Makowska-Janusik, M.; Olasunkanmi, L. O.; Ebenso, E. E. Corrosion inhibition of mild steel in 1M HCl by D-glucose derivatives of dihydropyrido [2,3-d:6,5d′]dipyrimidine-2, 4, 6, 8(1H,3H,5H,7H)-tetraone. Sci. Rep. 2017, 7, 44432. (37) Petersen, P. M.; Wu, W.; Fenlon, E. E.; Kim, S.; Zimmerman, S. C. Synthesis of heterocycles containing two cytosine or two guanine base-pairing sites. Novel tectons for self-assembly. Bioorg. Med. Chem. 1996, 4, 1107−1112. (38) Bhat, A. R.; Dongre, R. S. One-pot synthesis of annulated pyrido[2,3-d:6,5- d]dipyrimidine derivatives using nitrogen based DBU catalyst in aqueous ethanol medium. J. Taiwan Inst. Chem. Eng. 2015, 56, 191−195. (39) Rostamizadeh, S.; Tahershamsi, L.; Zekri, N. An efficient, onepot synthesis of pyrido[2,3-d:6,5-d′]dipyrimidines using SBA-15supported sulfonic acid nanocatalyst under solvent-free conditions. J. Iran. Chem. Soc. 2015, 12, 1381−1389. (40) Mohsenimehr, M.; Mamaghani, M.; Shirini, F.; Sheykhan, M.; Abbaspour, S.; Sabet, L. S. One-pot synthesis of novel pyrimido[4,5b]quinolines and pyrido[2,3- d:6,5d′]dipyrimidines using encapsulated-γ-Fe2O3 nanoparticles. J. Chem. Sci. 2015, 127, 1895−1904. (41) Naeimi, H.; Didar, A. Facile one-pot four component synthesis of pyrido[2,3-d:6,5- d′]dipyrimidines catalyzed by CuFe2O4 magnetic nanoparticles in water. J. Mol. Struct. 2017, 1137, 626−633. (42) Naeimi, H.; Didar, A.; Rashid, Z. Microwave-assisted synthesis of pyrido-dipyrimidines using magnetically CuFe2O4 nanoparticles as an efficient, reusable, and powerful catalyst in water. J. Iran. Chem. Soc. 2017, 14, 377−385. (43) Naeimi, H.; Didar, A. Efficient sonochemical green reaction of aldehyde, thiobarbituric acid and ammonium acetate using magnetically recyclable nanocatalyst in water. Ultrason. Sonochem. 2017, 34, 889−895. (44) Fattahi, M.; Davoodnia, A.; Pordel, M. Efficient one-pot synthesis of some new pyrimido[5′,4′:5,6]pyrido[2,3-d]pyrimidines catalyzed by magnetically recyclable Fe3O4 nanoparticles. Russ. J. Gen. Chem. 2017, 87, 863−867. (45) Panahi, F.; Yousefi, R.; Mehraban, M. H.; Khalafi-Nezhad, A. Synthesis of new pyrimidine-fused derivatives as potent and selective antidiabetic α-glucosidase inhibitors. Carbohydr. Res. 2013, 380, 81− 91. (46) Nourisefat, M.; Panahi, F.; Khalafi-Nezhad, A. Carbohydrates as a reagent in multicomponent reactions: one-pot access to a new library of hydrophilic substituted pyrimidine-fused heterocycles. Org. Biomol. Chem. 2014, 12, 9419−9426. (47) Divar, M.; Panahi, F.; Shariatipour, S. R.; Khalafi-Nezhad, A. Synthesis of imidazole and theophylline derivatives incorporating pyrimidine-fused heterocycles using magnetic nanoparticles-supported tungstic acid (MNP-TA) catalyst. J. Heterocyclic Chem. 2017, 54, 660− 669. (48) Brahmachari, G.; Begam, S.; Nurjamal, K. Bismuth nitrate catalyzed one-pot multicomponent synthesis of a novel series of diversely substituted 1,8- dioxodecahydroacridines at room temperature. ChemistrySelect 2017, 2, 3311−3316. (49) Brahmachari, G. Design for carbon−carbon bond forming reactions under ambient conditions. RSC Adv. 2016, 6, 64676−64725. (50) Banerjee, B.; Brahmachari, G. Room temperature metal-free synthesis of aryl/heteroaryl- substituted bis(6-aminouracil-5-yl)methanes using sulfamic acid (NH2SO3H) as an efficient and ecofriendly organo-catalyst. Curr. Organocatal. 2016, 3, 125−132. (51) Brahmachari, G.; Banerjee, B. Ceric ammonium nitrate (CAN): an efficient and ecofriendly catalyst for the one-pot synthesis of alkyl/ aryl/heteroaryl-substituted bis(6- aminouracil-5-yl)methanes at room temperature. RSC Adv. 2015, 5, 39263−39269. (52) Brahmachari, G. Room temperature one-pot green synthesis of coumarin-3-carboxylic acids in water: a practical method for the largescale synthesis. ACS Sustainable Chem. Eng. 2015, 3, 2350−2358.

(53) Brahmachari, G.; Choo, C. Y.; Ambure, P.; Roy, K. In vitro evaluation and in silico screening of synthetic acetylcholinesterase inhibitors bearing functionalized piperidine pharmacophores. Bioorg. Med. Chem. 2015, 23, 4567−4575. (54) Brahmachari, G.; Das, S. Sodium formate-catalyzed one-pot synthesis of benzopyranopyrimidines and 4-thio-substituted 4Hchromenes via multicomponent reaction at room temperature. J. Heterocyclic Chem. 2015, 52, 653−659. (55) Brahmachari, G.; Banerjee, B. Facile and one-pot access of 3,3bis(indol-3-yl)indolin-2- ones and 2,2-bis(indol-3-yl)acenaphthylen1(2H)-one derivatives via an eco-friendly pseudo-multicomponent reaction at room temperature using sulfamic acid as an organocatalyst. ACS Sustainable Chem. Eng. 2014, 2, 2802−2812. (56) Brahmachari, G.; Laskar, S. Nano-MgO-catalyzed one-pot synthesis of phosphonate ester functionalized 2-amino-3-cyano-4Hchromene scaffolds at room temperature. Phosphorus, Sulfur Silicon Relat. Elem. 2014, 189, 873−888. (57) Brahmachari, G.; Das, S. L-Proline catalyzed multicomponent one-pot synthesis of gem- diheteroarylmethane derivatives using facile grinding operation under solvent-free conditions at room temperature. RSC Adv. 2014, 4, 7380−7388. (58) Brahmachari, G.; Banerjee, B. A comparison between catalystfree and ZrOCl2·8H2O- catalyzed strecker reactions for the rapid and solvent-free one-pot synthesis of racemic α-aminonitrile derivatives. Asian J. Org. Chem. 2012, 1, 251−258. (59) Brahmachari, G.; Das, S. Bismuth nitrate-catalyzed multicomponent reaction for efficient and one-pot synthesis of densely functionalized piperidine scaffolds at room temperature. Tetrahedron Lett. 2012, 53, 1479−1484. (60) Brahmachari, G.; Laskar, S. A very simple and highly efficient procedure for N-formylation of primary and secondary amines at room temperature under solvent-free conditions. Tetrahedron Lett. 2010, 51, 2319−2322. (61) Kong, D.-l.; Lu, G.-P.; Wu, M.; Shi, Z.; Lin, Q. One-pot, catalystfree synthesis of spiro[dihydroquinoline-naphthofuranone] compounds from isatins in water triggered by hydrogen bonding effects. ACS Sustainable Chem. Eng. 2017, 5, 3465−3470. (62) Gawande, M. B.; Bonifácio, V. D. B.; Luque, R.; Branco, P. S.; Varma, R. S. Benign by design: Catalyst-free in-water, on-water green chemical methodologies in organic synthesis. Chem. Soc. Rev. 2013, 42, 5522−5551. (63) Chanda, A.; Fokin, V. V. Organic synthesis “On Water. Chem. Rev. 2009, 109, 725−748. (64) Hayashi, Y. In water or in the presence of water? Angew. Chem., Int. Ed. 2006, 45, 8103−8104. (65) Li, C. J.; Chen, L. Organic chemistry in water. Chem. Soc. Rev. 2006, 35, 68−82. (66) Lindström, U. M. Stereoselective organic reactions in water. Chem. Rev. 2002, 102, 2751−2772. (67) Haji, M. Multicomponent reactions: A simple and efficient route to heterocyclic phosphonates. Beilstein J. Org. Chem. 2016, 12, 1269− 1301. (68) Wender, P. A. Toward the ideal synthesis and molecular function through synthesis- informed design. Nat. Prod. Rep. 2014, 31, 433−440. (69) Gore, R. P.; Rajput, A. P. A review on recent progress in multicomponent reactions of pyrimidine synthesis. Drug Invent. Today 2013, 5, 148−152. (70) Van der Jeught, S.; Stevens, C. V. Direct phosphonylation of aromatic azaheterocycles. Chem. Rev. 2009, 109, 2672−2702. (71) Zhu, J., Bienaymé, H., Eds. Multicomponent Reactions; WileyVCH: Weinheim, Germany, 2005. (72) Moonen, K.; Laureyn, I.; Stevens, C. V. Synthetic methods for azaheterocyclic phosphonates and their biological activity. Chem. Rev. 2004, 104, 6177−6216. (73) Biot, C.; Chibale, K. Novel approaches to antimalarial drug discovery. Infect. Disord.: Drug Targets 2006, 6, 173−204. 9504


Research Article

ACS Sustainable Chemistry & Engineering (74) Viegas-Junior, C.; Barreiro, E. J.; Fraga, C. A. M. Molecular hybridization: A useful tool in the design of new drug prototypes. Curr. Med. Chem. 2007, 14, 1829−1852. (75) Decker, M., Ed. Design of hybrid molecules for drug development; Elsevier: Amsterdam, Netherlands, 2017. (76) Ma, X.; Keyume, A.; Mamateli, O.; Mengnisa, S.; Reyhangul, R.; Li, W. Facial one-pot, three-component synthesis of thiazole compounds by the reactions of aldehyde/ketone, thiosemicarbazide and chlorinated carboxylic ester derivatives. Tetrahedron 2016, 72, 2349−2353. (77) Zhang, X.; Wang, Z.; Xu, K.; Feng, Y.; Zhao, W.; Xu, X.; Yan, Y.; Yi, W. HOTf- catalyzed sustainable one-pot synthesis of benzene and pyridine derivatives under solvent-free conditions. Green Chem. 2016, 18, 2313−2316. (78) Brahmachari, G.; Banerjee, B. Catalyst-free organic synthesis at room temperature in aqueous and non-aqueous media: an emerging field of green chemistry practice and sustainability. Curr. Green Chem. 2015, 2, 274−305. (79) Brahmachari, G. Room temperature organic synthesis; Elsevier: Amsterdam, The Netherlands, 2015. (80) Verma, A. K.; Kotla, S. K. R.; Choudhary, D.; Patel, M.; Tiwari, R. K. Silver-catalyzed tandem synthesis of naphthyridines and thienopyridines via three-component reaction. J. Org. Chem. 2013, 78, 4386−4401. (81) Basavanag, U. M. V.; Dos Santos, A. D.; El Kaim, L. E.; GámezMontaño, R.; Grimaud, L. Three-component metal-free arylation of isocyanides. Angew. Chem., Int. Ed. 2013, 52, 7194−7197. (82) Khurana, J. M.; Chaudhary, A.; Lumb, A.; Nand, B. An expedient four-component domino protocol for the synthesis of novel benzo[a]phenazine annulated heterocycles and their photophysical studies. Green Chem. 2012, 14, 2321−2327. (83) Singh, M. S.; Chowdhury, S. Recent developments in solventfree multicomponent reactions: a perfect synergy for eco-compatible organic synthesis. RSC Adv. 2012, 2, 4547−4592. (84) Brahmachari, G.; Nurjamal, K. Facile and chemically sustainable catalyst-free synthesis of diverse 2-aryl-4-alkyl/aryl-pyrano[3,2-c]chromen-5(4H)-ones by one-pot multicomponent reactions at room temperature. ChemistrySelect 2017, 2, 3695−3702. (85) Brahmachari, G.; Nayek, N. Catalyst-free one-pot threecomponent synthesis of diversely substituted 5-aryl-2-oxo-/thioxo2,3-dihydro-1H-benzo[6,7]chromeno[2,3-d]pyrimidine- 4,6,11(5H)triones under ambient conditions. ACS Omega 2017, 2, 5025−5035. (86) Abou-Shehada, S.; Mampuys, P.; Maes, B. U. W.; Clark, J. H.; Summerton, L. An evaluation of credentials of a multicomponent reaction for the synthesis of isothioureas through the use of a holistic CHEM21 green metrics toolkit. Green Chem. 2017, 19, 249−258. (87) Willis, N. J.; Fisher, C. A.; Alder, C. M.; Harsanyi, A.; Shukla, L.; Adams, J. P.; Sandford, G. Sustainable synthesis of enantiopure fluorolactam derivatives by a selective direct fluorination − amidase strategy. Green Chem. 2016, 18, 1313−1318. (88) Roschangar, F.; Sheldon, R. A.; Senanayake, C. H. Overcoming barriers to green chemistry in the pharmaceutical industry − the Green Aspiration Level concept. Green Chem. 2015, 17, 752−768. (89) Jiménez-González, C.; Constable, D. J. C.; Ponder, C. S. Evaluating the “Greenness” of chemical processes and products in the pharmaceutical industrya green metrics primer. Chem. Soc. Rev. 2012, 41, 1485−1498. (90) Jimenez-Gonzalez, C.; Ponder, C. S.; Broxterman, Q. B.; Manley, J. B. Using the right green yardstick: Why process mass intensity is used in the pharmaceutical industry to drive more sustainable processes. Org. Process Res. Dev. 2011, 15, 912−917. (91) Augé, J. A new rationale of reaction metrics for green chemistry. Mathematical expression of the environmental impact factor of chemical processes. Green Chem. 2008, 10, 225−231. (92) Constable, D. J. C.; Curzons, A. D.; Cunningham, V. L. Metrics to ‘green’ chemistry which are the best? Green Chem. 2002, 4, 521− 527. (93) Jiménez-González, C.; Curzons, A. D.; Constable, D. J. C.; Overcash, M. R.; Cunningham, V. L. How do you select the “greenest”

technology? Development of guidance for the pharmaceutical industry. Clean Prod. Processes 2001, 3, 35−41. (94) Anastas, P. T.; Warner, J. C. Green Chemistry: Theory and Practice; Oxford University Press: Oxford, 2000.

9505


Development of a water-mediated and catalyst-free green protocol for

Recommend Documents