Direct Access to IMesF and IMesF2 by Electrophilic Fluorination of

2 days ago - The incorporation of fluorine atoms into the N-heterocyclic carbene (NHC) ligand backbone in a Mn(I) complex [CpMn(CO)2(IMes)] was ...
1 downloads 0 Views 769KB Size
Article Cite This: Organometallics XXXX, XXX, XXX−XXX

pubs.acs.org/Organometallics

Direct Access to IMesF and IMesF2 by Electrophilic Fluorination of Abnormal N‑Heterocyclic Carbenes Alina A. Grineva,†,‡ Oleg A. Filippov,§ Sergei E. Nefedov,‡ Noël Lugan,*,† Vincent Ceś ar,*,† and Dmitry A. Valyaev*,† †

LCC-CNRS, Université de Toulouse, CNRS, 205 route de Narbonne, 31077 Toulouse Cedex 4, France Kurnakov Institute of General and Inorganic Chemistry, Russian Academy of Sciences, 31 Leninsky Pr., Moscow 119991, Russia § A.N. Nesmeyanov Institute of Organoelement Compounds (INEOS), Russian Academy of Sciences, GSP-1, B-334, 28 Vavilov str., Moscow 119991, Russia Organometallics Downloaded from pubs.acs.org by ALBRIGHT COLG on 04/29/19. For personal use only.



S Supporting Information *

ABSTRACT: The incorporation of fluorine atoms into the N-heterocyclic carbene (NHC) ligand backbone in a Mn(I) complex [CpMn(CO)2(IMes)] was achieved via a sequence of the C−H bond deprotonation and electrophilic fluorination of the anionic abnormal carbene moiety with N-fluorobenzenesulfonimide. The demetallation of resulting complexes [CpMn(CO)2(IMesF1‑2)] with triflic acid afforded the imidazolium salts IMesF1‑2·HOTf, the precursors of the corresponding fluorinated NHCs. Interestingly, the IMesF2 ligand was found to be more electron-donating than its well-known analogue IMesCl2 notwithstanding the higher electronegativity of fluorine atoms. A systematic experimental and density functional theory study of this NHC series allowed us to fully rationalize this unexpected behavior, revealing that the weaker σ-donation of IMesF2 is compensated by its lower π-accepting properties due to the strong mesomeric +M effect of the fluorine substituents.



INTRODUCTION

Scheme 1. Bis-chlorination and Bis-bromination of Imidazol-2-ylidenes (Left) and Target Fluorine-Substituted NHCs under Study (Right)

Thanks to their beneficial stereoelectronic properties, Nheterocyclic carbenes (NHCs) have emerged as game changer ligands in organometallic chemistry and homogeneous catalysis, providing in some cases outstanding catalytic systems.1,2 NHCs indeed combine strong σ-donation, resulting in highly stable metal ligation, with good steric protection of the catalytic center, due to their shell-like shape.3 As the 1,3dimesitylimidazol-2-ylidene (IMes) and 1,3-bis(2,6diisopropylphenyl)imidazol-2-ylidene (IPr) became the most emblematic NHC ligands, a great deal of research efforts were directed toward their fine tuning in view of expanding their application scope, and the substitution of the 4 and 5 imidazolyl-positions by heteroatoms appeared an astounding lever to that purpose.4 Focusing on the halogen series, the 4,5dichloro IArCl2 and dibromo IArBr2 derivatives were readily obtained by a simple treatment of the free IAr NHCs with CCl4 or CBr4, respectively (Scheme 1).5 In view of the well-known inertness of the C−F bond and high solubility of organofluorine compounds in nonpolar media, the 4,5-difluoro analogue IArF2 would be also of great interest. Unfortunately, it cannot be obtained through the previous protocol, due to the lack of reactivity of perfluoroalkanes,6 and its synthesis was reported only very recently through a protocol using somehow toxic and difficultto-handle gaseous tetrafluoroethylene.7 This prompted us to disclose our own results on an alternative access to the 4-fluoro IMesF and 4,5-difluoro IMesF2 derivatives (Scheme 1), relying © XXXX American Chemical Society

on the unprecedented electrophilic fluorination of an abnormal imidazol-4-ylidene moiety as a key step.8,9



RESULTS AND DISCUSSION Our strategy was based on the use of a Mn(I) complex [CpMn(CO)2(IMes)] (1) easily available on a multigram scale, from which, as we had previously shown, the anionic “abnormal” imidazol-4-ylidene compound 1Li could be quantitatively generated by treatment with nBuLi at room temperature (RT), the C2 position being protected by the metallic fragment (Scheme 2).10 Such ditopic imidazol-2,4diylidene species were first disclosed by Robinson in 2010,11 and their chemistry was then extended by several groups.12 The abnormal carbene moiety in these compounds usually reacts with various electrophiles, leading, in some cases, to new Received: March 7, 2019

A

DOI: 10.1021/acs.organomet.9b00151 Organometallics XXXX, XXX, XXX−XXX

Article

Organometallics

Scheme 2. Synthesis of Imidazolium Salts IMesF1‑2·HOTf, and the Corresponding Selenoureas and Rh(I) Complexes Derived from IMesF1‑2 Carbenesa

a Reaction conditions: (i) 1.1 equiv of nBuLi, tetrahydrofuran (THF), RT; (ii) 1.5 equiv of NFSI, toluene, −80 °C; (iii) 1.5 equiv of TfOH, CH2Cl2, −40 °C to RT; (iv) 1.1 equiv of KHMDS, THF, −40 °C and then 0.5 equiv of [RhCl(COD)]2, −40 °C to RT; (v) CO, CH2Cl2, RT; (vi) 1.1 equiv of KHMDS, THF, −40 °C and then 1.15 equiv of elemental Se, −40 °C to RT.

Figure 1. Molecular structure of 2F (ellipsoids drawn at 30% probability level and hydrogen atoms omitted for clarity). Selected bond lengths (Å) and angles (deg) are as follows: Rh1−C1 2.060(3), Rh1−Cl1 2.3991(7), C3−F1 1.339(3), N2−C1−N1 103.3(2), and N1−C1−Rh1−Cl1 88.5(2).

backbone-functionalized NHCs.11,13 In our case, 1Li smoothly reacted at low temperature with N-fluorobenzenesulfonimide (NFSI), a classical reagent for electrophilic fluorination,14 to give the mono-fluoro derivative 1F in 88% isolated yield.15 Gratifyingly, a second fluorine atom could be installed through the same sequence of lithiation/electrophilic fluorination by

which complex 1F2 was obtained in 80% yield. As previously reported,10a treatment of the Mn(I) NHC complexes with triflic acid in CH2Cl2 at −40 °C led to a clean demetallation of the complexes to afford the corresponding imidazolium triflates IMesF·HOTf and IMesF2·HOTf in 95 and 75% yields, respectively, as white, analytically pure powders. B

DOI: 10.1021/acs.organomet.9b00151 Organometallics XXXX, XXX, XXX−XXX

Article

Organometallics

that of IMesCl2 (1JCH = 232 Hz), which was quite expected in regard to the respective electronegativity trend. As the 77Se chemical shift in NHCSe adducts was shown to provide a good and precise scale for the π-acidity of the NHCs,19 the selenoureas 4F and 4F2 were synthesized by trapping the corresponding free IMesF and IMesF2 with metallic selenium. Low isolated yields for these compounds arose probably from the decomposition during the chromatographic purification. While the π-accepting properties of IMesF (δSe = 55.3 ppm) and IMesF2 (δSe = 60.9 ppm) are higher than those of IMes (δSe = 35.0 ppm), they remain much lower compared to IMesCl2 (δSe = 114.0 ppm) or to the cationic IMesNMe3+ (δSe = 102.0 ppm) bearing a σ-withdrawing ammonium group on the backbone.20 This can be explained considering that fluorine substituents are much better electron donors, by mesomeric effect (+M), than chlorine ones and especially than the ammonium group having no accessible lone electron pair. To consolidate the experimental quantification of the electronic properties of halogen-substituted IMes ligands, the energies of the occupied nC(σ) and empty 2pC(π*) orbitals (Figure S1) for this series of free NHCs were calculated at the B3LYP/6-31+G** level of theory (Table 1). In agreement with chemical intuition, the nucleophilicity of singlet NHCs decreased in the order of IMes > IMesF > IMesCl2 > IMesF2 as reflected by the energy level of the corresponding HOMO nC(σ) orbitals. The calculated relative energies of empty 2pC(π*) orbitals within this IMesXY series (Table 1) reflecting their electrophilic character are also in agreement with experimental estimation by 77Se NMR spectroscopy for the corresponding selenoureas 4XY.

Having established the synthetic access to the imidazolium triflates IMesF·HOTf and IMesF2·HOTf, we next turned our attention to the possible use of the respective IMesF and IMesF2 derivatives as supporting ligands in transition metal complexes and to the complete quantification of their electronic properties. The Rh(I) complexes 2F and 2F2 were obtained in good yields by generating the free NHCs from IMesF·HOTf and IMesF2·HOTf, respectively, with potassium bis(trimethylsilyl)amide (KHMDS) at −40 °C and trapping with [RhCl(COD)]2 (Scheme 2). Both complexes were fully characterized by spectroscopic and analytical techniques, including XRD for complex 2F (Figure 1). Complex 2F displaying a typical square-planar geometry around the Rh(I) center is isostructural to the parent [RhCl(COD)(IMes)] derivative and exhibits the same main metrical parameters within experimental error.16 The COD complexes 2F and 2F2 were then further converted to their dicarbonyl analogues 3F and 3F2 by bubbling gaseous CO into a solution of 2F or 2F2 in CH2Cl2, respectively. Measuring the average IR-stretching frequency of the carbonyl ligands allowed the quantification of the overall electronic donation of the NHCs by calculating the Tolman electronic parameter (TEP) values through linear regression (Table 1).3 Comparing their TEP values (IMesF, Table 1. Experimental and Theoretical Electronic Parameters of IMes-Derived NHCs IMesXY νCOav

XY

−1 a

for 3 (cm ) TEP value (cm−1)b 1 JCH (Hz) for IMesXY·HOTf δ(77Se) for 4XY (ppm)c ε(nC(σ)) (eV)d ε(2pC(π*)) (eV)d

IMes

IMesF

IMesF2

IMesCl2

2038 2051 225 35.0 −5.87 0.19

2040 2052 230 55.3 −6.05 0.09

2042.5 2054 235 60.9 −6.25 0.06

2043 2055 232 114.0 −6.24 0.08



CONCLUSIONS In summary, we have disclosed a viable and practical synthetic access toward the mono and bis backbone-fluorinated 1,3dimesitylimidazol-2-ylidenes IMesF and IMesF2, respectively. The key step of the synthesis is an unprecedented electrophilic fluorination of the imidazol-2,4-diylidene carbene scaffold, whose C2 position is protected by a [CpMn(CO)2] fragment. The fluorine substituents were shown to exert a strong decrease on the σ-donation of the NHCs due to their electronwithdrawing character, but this effect is counterbalanced with only marginally changed π-acidity due to a non-negligible mesomeric donor effect of the fluorine lone pairs. Extension of this methodology to other original backbone-functionalized NHCs as well as the application of the newly formed fluorinated NHCs in organometallic chemistry and catalysis is underway in our laboratories.

Recorded in CH2Cl2 with a resolution of 0.5 cm−1. bTolman electronic parameter (TEP) values calculated using the equation TEP = (0.8001νCOav + 420.0 cm−1). cRecorded in acetone-d6. dCalculated at the B3LYP/6-31+G** level of theory. a

TEP = 2052 cm−1 and IMesF2, TEP = 2054 cm−1) with those of the nonsubstituted IMes (TEP = 2051 cm−1) revealed that the introduction of each fluorine atom onto the imidazolyl heterocycle is accompanied by a stepwise decrease of the overall electronic donation of the carbene ligand. More surprisingly, although the electronegativity of fluorine is the highest across the periodic table, the overall donation of IMesF2 was found to be slightly higher than the one of its chlorine analogue IMesCl2 (TEP = 2055 cm−1) being in a slight discrepancy with computed TEP values reported by Gusev for similar Ni(CO)3(IMeX2) complexes (TEP values of 2059.1 and 2059.0 for X = F and Cl, respectively).17 To rationalize this unexpected experimental observation, we carried out a deeper analysis by deconvolution of the σ-donation and π-acidity over this NHC series. According to Ganter’s work, the σ-donation of the imidazol2-ylidenes correlates well with the coupling constant 1JCH between the carbon and hydrogen atoms of the precarbenic position.18 Starting from 1JCH = 225 Hz for IMes·HOTf, the strong electron-withdrawing effect of fluorine was evidenced by the 5 Hz increase of the 1JCH coupling constant, when adding one (IMesF·HOTf: 1JCH = 230 Hz) and two (IMesF2·HOTf: 1 JCH = 235 Hz) fluorine atoms onto the backbone (Table 1). Moreover, the σ-donation of IMesF2 appeared to be lower than



EXPERIMENTAL SECTION

General Information. All manipulations besides handling of airstable imidazolium salts and selenoureas were carried out using Schlenk techniques under an atmosphere of dry nitrogen. Dry and oxygen-free organic solvents (THF, toluene, CH2Cl2) were obtained using a LabSolv (Innovative Technology) solvent purification system. Solvents used for the purification of organometallic complexes by column chromatography (hexane, toluene, CH2Cl2, THF) were deoxygenated by nitrogen bubbling during 10−15 min. Deuterated benzene for NMR experiments was deoxygenated by three freeze− pump−thaw cycles and kept over 4 Å molecular sieves. CDCl3 was passed through a short column of basic alumina, deoxygenated by three freeze−pump−thaw cycles, and kept over 4 Å molecular sieves. Chromatographic purification of the compounds was performed on silica (0.060−0.200 mm, 60 Å) and activated alumina (neutral, Brockmann type 3, 0.050−0.200 mm) obtained from Acros Organics. C

DOI: 10.1021/acs.organomet.9b00151 Organometallics XXXX, XXX, XXX−XXX

Article

Organometallics

C6D6, 25 °C): δ −156.5 (s) (CIm‑4,5−F); 13C{1H} NMR (100.6 MHz, C6D6, 25 °C): δ 233.7 (s, Mn−CO), 198.1 (t, 3JCF = 13.6 Hz, Mn− CN2), 140.0 (s, Cp‑Mes), 137.2 (s, Co‑Mes), 132.6 (s, Ci‑Mes), 129.8 (s, CHMes), 129.3 (dd overlapped with C6D6 signal, 1JCF = 258.4 Hz, 2JCF = 17.7 Hz, CIm‑4,5−F), 81.6 (s, Cp), 21.2 (s, CH3 p‑Mes), 18.3 (s, CH3 o‑Mes). IR (toluene): νCO 1920.5 (s), 1854.0 cm−1 (s). Anal. Found: C, 65.05; H, 5.30; N, 5.37. Calcd for C28H27F2N2O2Mn: C, 65.12; H, 5.27; N, 5.47. Synthesis of IMesF·HOTf. Triflic acid (53 μL, 0.6 mmol, 1.5 equiv) was added dropwise to a yellow solution of complex 1F (200 mg, 0.4 mmol) in CH2Cl2 (10 mL) at −40 °C. The resulting brown solution was warmed to room temperature and filtered through a short pad of Celite, and the filter was washed with additional CH2Cl2 (15 mL). The volatiles were removed under vacuum, and the crude product was purified by chromatography on silica gel (2 × 15 cm). Elution with CH2Cl2 afforded several yellow-brown bands containing some cymantrene and unidentified impurities, followed by the product IMesF·HOTf, which was finally eluted with a 10:1 CH2Cl2/acetone mixture. The eluate was evaporated under vacuum, and the product was washed with Et2O (3 × 5 mL) and dried under vacuum to give IMesF·HOTf (180 mg, 95%) as a white powder. 1H NMR (400.2 MHz, CDCl3, 25 °C): δ 9.42 (t, 4JHH = 4JFH = 1.8 Hz, 1H, N2CH), 7.28 (dd, 3JFH = 6.2 Hz, 4JHH = 1.8 Hz, CHIm‑5), 7.06 (s, 2H, CHMes), 7.01 (s, 2H, CHMes), 2.36 (s, 3H, CH3 p‑Mes), 2.34 (s, 3H, CH3 p‑Mes), 2.16 (s, 6H, CH3 o‑Mes), 2.14 (s, 6H, CH3 o‑Mes); 19F{1H} NMR (376.5 MHz, CDCl3, 25 °C): δ −79.0 (s, CF3SO3−), −141.8 (CIm‑4−F); 13 C{1H} NMR (100.6 MHz, CDCl3, 25 °C): δ 146.7 (d, 1JCF = 271.7 Hz, CIm‑4−F), 142.5, 142.0 (s, Cp‑Mes), 134.9 (s, Co‑Mes), 134.2 (d, 3JCF = 4.2 Hz, N2CH), 134.1 (s, Co‑Mes), 130.7 (s, Ci‑Mes), 130.2, 130.1 (s, CHMes), 125.5 (s, Ci‑Mes), 120.5 (q, 1JCF = 320.5 Hz, CF3SO3−), 104.3 (d, 2JCF = 19.6 Hz, CHIm‑5), 21.3, 21.25 (s, CH3 p‑Mes), 17.5, 17.3 (s, CH3 o‑Mes). Anal. Found: C, 55.85; H, 4.77; N, 5.52; Calcd for C22H24F4N2O3S: C, 55.92; H, 5.12; N, 5.93. Synthesis of IMesF2·HOTf. Triflic acid (15 μL, 0.225 mmol, 1.5 equiv) was added dropwise to a yellow solution of complex 1F2 (80 mg, 0.15 mmol) in CH2Cl2 (8 mL) at −40 °C. The resulting brown solution was warmed to room temperature and filtered through a short pad of Celite, and the filter was washed with CH2Cl2 (15 mL). The solvent was removed under vacuum, and the solid residue was purified by chromatography on a silica column (2 × 15 cm). Elution with CH2Cl2 afforded several yellow-brown bands containing some cymantrene and unidentified impurities, followed by the target product IMesF2·HOTf, which was finally eluted with the 10:1 CH2Cl2/acetone mixture. Solvents were removed from the eluate under vacuum, and the residue was washed with Et2O (3 × 5 mL). The solvent was removed under vacuum to give IMesF2·HOTf (55 mg, 75%) as a white powder. 1H NMR (400.2 MHz, CDCl3, 25 °C): δ 9.73 (t, 4JFH = 2.2 Hz, 1H, N2CH), 7.10 (s, 4H, CHMes), 2.38 (s, 6H, CH3 p‑Mes), 2.22 (s, 12H, CH3 o‑Mes); 19F{1H} NMR (376.5 MHz, CDCl3, 25 °C): δ −79.0 (s, CF3SO3−), −154.4 (CIm‑4,5−F); 13C{1H} NMR (100.6 MHz, CDCl3, 25 °C): δ 143.1 (s, Cp‑Mes), 134.9 (s, Co‑Mes), 130.4 (s, CHMes), 128.3 (t, 3JCF = 4.9 Hz, N2CH), 128.3 (dd, 1 JCF = 269.4 Hz, 2JCF = 15.3 Hz, CIm‑4,5−F), 125.6 (s, Ci‑Mes), 120.5 (q, 1JCF = 320.5 Hz, CF3SO3−), 21.4 (s, CH3 p‑Mes), 17.6 (s, CH3 o‑Mes). Anal. Found: C, 54.04; H, 4.73; N, 5.58. Calcd for C22H23F5N2O3S: C, 53.87; H, 4.73; N, 5.71. Synthesis of [Rh(cod)Cl(IMesF)] (2F). A 0.5 M solution of KHMDS (0.44 mL, 0.22 mmol, 1.1 equiv) in toluene was added dropwise to a suspension of IMesF·HOTf (95 mg, 0.2 mmol) in THF (3 mL) at −40 °C. The resulting brown solution of the carbene IMesF was stirred for 15 min at this temperature, and then solid [RhCl(cod)]2 (49.3 mg, 0.1 mmol, 0.5 equiv) was added in one portion. The reaction mixture was slowly warmed to room temperature over a time period of 2 h. The solvent was removed under vacuum, and the residue was purified by column chromatography on silica gel (1 × 10 cm). Elution with toluene afforded a yellow band containing traces of unreacted complex [RhCl(cod)]2, followed by a yellow-orange band of the product that was eluted with the 10:1 toluene/THF mixture. The eluate was evaporated under vacuum to afford complex 2F (100 mg, 88% yield) as a yellow powder. Single crystals of 2F suitable for an

The compounds Cp(CO)2Mn(IMes) (1),10a [Rh(cod)Cl]2,21 and IMes·HCl22 were prepared according to previously described methods. Commercial NFSI was purified by crystallization from dry THF at −20 °C. All other reagent-grade chemicals purchased from commercial sources were used as received. Solution IR spectra were recorded in 0.1 mm CaF2 cells using a PerkinElmer Frontier FT-IR spectrometer and are given in cm−1 with relative intensity in parentheses. 1H, 13C, and 19F and 77Se NMR spectra were obtained on Bruker Avance 400, Avance III HD 400, and Avance NEO 600 spectrometers and referenced against the residual signals of deuterated solvents (1H and 13C),23 BF3·OEt2 (19F, external standard), and Me2Se (77Se, external standard). Elemental analyses were carried out at the LCC-CNRS (Toulouse) using a PerkinElmer 2400 series II analyzer. High-resolution mass spectra (ESI, positive mode) were obtained using a Xevo G2 QTof (Waters) spectrometer. Synthesis of [Cp(CO)2Mn(IMesF)] (1F). To a yellow solution of complex 1 (960 mg, 2.0 mmol) in THF (10 mL), a 2.5 M solution of nBuLi in hexane (0.9 mL, 2.2 mmol, 1.1 equiv) was added dropwise at RT. The resulting deep red solution was stirred for an additional 30 min until the full conversion of starting 1 into the complex 1Li (νCO 1900.5 (s), 1831.0 cm−1 (s)) was evidenced by IR spectroscopy. The solvent was then removed under vacuum, and the resulting red residue was dissolved in toluene (10 mL). This solution was then added dropwise to a solution of NFSI (946 mg, 3 mmol, 1.5 equiv) in toluene (60 mL) at −80 °C to give a dark green suspension. The reaction mixture was slowly warmed to room temperature, stirred for an additional 1 h, and then filtered through a short column of silica (2 × 4 cm) using dry toluene as eluent. The solvent was removed under vacuum, and the brown residue was purified by column chromatography on silica (2 × 20 cm). Elution with a 2:1 CH2Cl2/hexane mixture afforded a yellow band containing the desired complex 1F, followed by a yellow band containing starting complex 1 (eventually recovered, 200 mg) on elution with a 4:1 CH2Cl2/hexane mixture. The first fraction was evaporated under vacuum, and the crude product was crystallized from a toluene/hexane mixture to afford complex 1F (690 mg, 70% yield, 88% yield based on the starting material consumed) as yellow crystals. 1H NMR (400.2 MHz, C6D6, 25 °C): δ 6.84 (s, 2H, CHMes), 6.82 (s, 2H, CHMes), 5.73 (d, 3JFH = 6.5 Hz, 1H, CHIm‑5), 3.97 (s, 5H, Cp), 2.16 (s, 3H, CH3 p‑Mes), 2.12 (s, 6H, CH3 o‑Mes), 2.11 (s, 3H, CH3 p‑Mes), 2.08 (s, 6H, CH3 o‑Mes); 19 1 F{ H} NMR (376.5 MHz, C6D6, 25 °C): δ −145.7 (s, CIm‑4−F); 13 C{1H} NMR (100.6 MHz, C6D6, 25 °C): δ 234.0 (s, Mn−CO), 203.8 (d, 3JCF = 12.5 Hz, Mn−CN2), 149.6 (d, 1JCF = 261.8 Hz, CIm‑4−F), 139.6, 138.9 (s, Cp‑Mes), 138.4 (s, Ci‑Mes), 137.1, 136.2 (s, Co‑Mes), 132.8 (s, Ci‑Mes), 129.7, 129.5 (s, CHMes), 102.3 (d, 2JCF = 21.8 Hz, CHIm‑5), 81.5 (s, Cp), 21.2 (s, CH3 p‑Mes), 18.4 (s, CH3 o‑Mes). IR (toluene): νCO 1918.0 (s), 1851.0 cm−1 (s). Anal. Found: C, 67.12; H, 5.52; N, 5.55. Calcd for C28H28FN2O2Mn: C, 67.47; H, 5.66; N, 5.62. Synthesis of [Cp(CO)2Mn(IMesF2)] (1F2). To a yellow solution of complex 1F (250 mg, 0.5 mmol) in THF (5 mL), a 2.5 M solution of nBuLi in hexane (0.22 mL, 0.55 mmol) was added dropwise at room temperature. The resulting deep red solution was stirred for an additional 20 min until the full conversion of starting 1F into the complex 1FLi (νCO 1902.5 (s), 1833.0 cm−1 (s)) was evidenced by IR spectroscopy. After removal of volatiles under vacuum, the red residue was dissolved in toluene (10 mL) and then added dropwise to a solution of NFSI (237 mg, 0.75 mmol, 1.5 equiv) in toluene (35 mL) at −80 °C to give a dark green suspension. The reaction mixture was stirred for 1 h at −80 °C, slowly warmed to −40 °C over 1 h, then cooled again to −80 °C, and filtered in cold through a short alumina column (2 × 4 cm) using dry toluene as eluent. The solvent was removed under vacuum, and the brown residue was purified on an alumina column (2 × 20 cm). Elution with the 2:1 CH2Cl2/hexane mixture afforded a yellow band containing the desired product. The solvent was evaporated under vacuum, and the residue was crystallized from the ether/hexane mixture to afford complex 1F2 (205 mg, 80% yield) as yellow crystals. 1H NMR (400.2 MHz, C6D6, 25 °C): δ 6.81 (s, 4H, CHMes), 3.94 (s, 5H, Cp), 2.11 (s, 6H, CH3 p‑Mes), 2.10 (s, 12H, CH3 o‑Mes); 19F{1H} NMR (376.5 MHz, D

DOI: 10.1021/acs.organomet.9b00151 Organometallics XXXX, XXX, XXX−XXX

Article

Organometallics 19

F, and 13C NMR spectroscopy with the main impurity being silicon grease. Synthesis of [Rh(CO)2Cl(IMesF2)] (3F2). Gaseous CO was bubbled slowly through a solution of complex 2F2 (20 mg, 0.03 mmol) in CH2Cl2 (2 mL) under stirring for ca. 15 min. The solution was further stirred for 30 min, filtered through Celite, and evaporated to dryness to afford complex 3F2 (14 mg, 93%) as a white powder. 1H NMR (400.2 MHz, CDCl3, 25 °C): δ 7.04 (s, 4H, CHMes), 2.38 (s, 6H, CH3 p‑Mes), 2.27 (s, 12H, CH3 p‑Mes); 19F{1H} NMR (376.5 MHz, CDCl3, 25 °C): δ −156.8 (s) (CIm‑4−F); 13C{1H} NMR (100.6 MHz, CDCl3, 25 °C): δ 184.5 (d, 1JCRh = 55.1 Hz, Rh−CO), 182.5 (d, 1JCRh = 74.1 Hz, Rh−CO), 140.8 (s, Cp‑Mes), 136.1 (s, Co‑Mes), 130.2 (s, Cipso‑Mes), 129.7 (s, CHMes), 129.3 (dd, 1JCF = 263.6 Hz, 2JCF = 18.0 Hz, CIm‑4,5−F), 29.9, 21.4, 18.5 (CH3 Mes). Carbene signal was not detected due to its expected multiplicity (td) and insufficient sample concentration. IR (CH2Cl2): νCO 2084.0 (s), 2001.0 cm−1 (s). HRMS (ESI, positive mode): m/z 512.1054. Calculated for C24H25F2N3O103Rh+ (M+ − Cl − CO + MeCN): 512.1015. The complex 5F2 was assessed to be >95% pure by 1H and 19F NMR spectroscopy and gradually decomposed at room temperature during the acquisition of its 13C NMR spectrum. Synthesis of IMesF = Se (4F). A 0.5 M solution of KHMDS (0.4 mL, 0.2 mmol, 1.15 equiv) in toluene was added dropwise to the suspension of IMesF·HOTf (80 mg, 0.17 mmol) in THF (4 mL) at −40 °C. The resulting solution was stirred for 15 min, and then solid selenium (16 mg, 0.2 mmol, 1.15 equiv) was added in one portion. The reaction mixture was warmed to room temperature and stirred overnight. The solvent was removed under vacuum, and the solid residue was dissolved in CH2Cl2 (2 mL) and filtered through a short pad of Celite. The solvent was removed under vacuum, and the crude product was purified by chromatography on a silica column (1 × 10 cm). Elution with the 4:1 CH2Cl2/EtOAc mixture afforded the desired product 4F (10 mg, 15% yield) as a white powder. 1H NMR (400.2 MHz, CDCl3, 25 °C): δ 7.05 (s, 2H, CHMes), 7. 01 (s, 2H, CHMes), 6.58 (d, 3JFH = 5.7 Hz, CHIm‑5), 2.36 (s, 3H, CH3 p‑Mes), 2.34 (s, 3H, CH3 p‑Mes), 2.18 (s, 6H, CH3 o‑Mes), 2.16 (s, 6H, CH3 o‑Mes); 19 1 F{ H} NMR (376.5 MHz, CDCl3, 25 °C): δ −144.4 (CIm‑4−F); 13 C{1H} NMR (100.6 MHz, CDCl3, 25 °C): δ 154.1 (d, 3JCF = 6.6 Hz, N2CSe), 146.4 (d, 1JCF = 264.1 Hz, CIm‑4−F), 140.5, 139.9 (s, Cp‑Mes), 136.2, 135.5 (s, Co‑Mes), 133.9 (s, Ci‑Mes), 130.2, 130.1 (s, CHMes), 125.5 (s, Ci‑Mes), 129.7, 129.5 (s, CHMes), 98.5 (d, 2JCF = 19.8 Hz, CHIm‑5), 21.45, 21.35 (s, CH3 p‑Mes), 18.15, 18.1 (s, CH3 o‑Mes); 77 Se NMR (114.5 MHz, acetone-d6, 25 °C): δ 55.3 (d, 4JSeF = 14.2 Hz). HRMS (DCI-CH4, positive mode): m/z 403.1079, correct isotope pattern was observed. Calculated for C21H24N2F80Se+ (M+ + H): 403.1083. The compound 6F was assessed to be >95% pure by 1 H, 19F, and 13C NMR spectroscopy. Synthesis of IMesF2 = Se (4F2). A 0.5 M solution of KHMDS (0.31 mL, 0.156 mmol, 1.2 equiv) in toluene was added dropwise to the suspension of IMesF2·HOTf (60 mg, 0.13 mmol) in THF (3 mL) at −40 °C. The resulting solution was stirred for 15 min, and then solid selenium (12 mg, 0.15 mmol, 1.15 equiv) was added in one portion. The reaction mixture was warmed to room temperature and stirred overnight. The solvent was removed under vacuum, and the residue was dissolved in CH2Cl2 (2 mL) and filtered through a short pad of Celite. The solvent was removed under vacuum, and the crude product was purified by chromatography on a silica column (1 × 10 cm) using the 4:1 CH2Cl2/EtOAc mixture to afford, after solvent evaporation, the desired product 4F2 (10 mg, 18% yield) as a white powder. 1H NMR (400.2 MHz, CDCl3, 25 °C): δ 7.05 (s, 4H, CHMes), 2.36 (s, 6H, CH3 p‑Mes), 2.20 (s, 12H, CH3 o‑Mes); 19F{1H} NMR (376.5 MHz, CDCl3, 25 °C): δ −158.8 (CIm‑4,5−F); 13C{1H} NMR (100.6 MHz, CDCl3, 25 °C): δ 148.6 (br. t, 3JCF = 7.2 Hz, N2CSe), 140.8 (s, Cp‑Mes), 136.3 (s, Co‑Mes), 129.8 (s, CHMes), 128.8 (s, Ci‑Mes), 126.5 (dd, 1JCF = 261.6 Hz, 2JCF = 15.2 Hz, CIm‑4,5− F), 21.5 (s, CH3 p‑Mes), 18.1 (s, CH3 o‑Mes); 77Se NMR (114.5 MHz, acetone-d6, 25 °C): δ 60.9 (br. t, 4JSeF = 16.5 Hz). HRMS (DCI-CH4, positive mode): m/z 421.0995, correct isotope pattern was observed. Calculated for C21H23N2F280Se+ (M+ + H): 421.0989. The compound

X-ray diffraction study were obtained by crystallization from the Et2O/hexane mixture at room temperature. 1H NMR (400.2 MHz, CDCl3, 25 °C): δ 7.07 (s, 1H, CHMes), 7.06 (s, 1H, CHMes), 7.03 (s, 1H, CHMes), 6.99 (s, 1H, CHMes), 6.59 (d, 3JFH = 6.7 Hz, 1H, CHIm‑5), 4.53 (br s, 2H, CHcod), 3.29 (br s, 2H, CHcod), 2.16 (s, 3H, CH3 p‑Mes), 2.44 (s, 3H, CH3 o‑Mes), 2.43 (s, 3H, CH3 o‑Mes), 2.385 (s, 3H, CH3 p‑Mes), 2.375 (s, 3H, CH3 p‑Mes), 2.17 (s, 3H, CH3 o‑Mes), 2.13 (s, 3H, CH3 o‑Mes), 1.93−1.75 (m, 4H, CH2 cod), 1.62−1.48 (m, 4H, CH2 cod); 19F{1H} NMR (376.5 MHz, CDCl3, 25 °C): δ −147.3 (s) (CIm‑4−F); 13C{1H} NMR (100.6 MHz, CDCl3, 25 °C): δ 180.5 (dd, 1 JCRh = 53.3 Hz, 3JCF = 12.8 Hz, Rh−CN2), 149.0 (d, 1JCF = 265.9 Hz, CIm‑4−F), 139.6, 139.1 (s, Cp‑Mes), 138.4, 137.6 (s, Co‑Mes), 136.4 (s, Cipso‑Mes), 135.2, 134.4 (s, Co‑Mes), 130.9 (s, Ci‑Mes), 129.9, 128.3 (s, CHMes), 102.2 (d, 2JCF = 22.6 Hz, CHIm‑5), 96.8 (d, 1JCRh = 7.0 Hz, CHcod), 96.5 (d, 1JCRh = 6.9 Hz, CHcod), 68.4 (d, 1JCRh = 14.2 Hz, CHcod), 68.0 (d, 1JCRh = 14.2 Hz, CHcod), 32.9, 32.6, 28.6, 28.3 (s, CH2 cod), 21.3, 21.2 (CH3 p‑Mes), 19.8, 18.2 (br s, CH3 o‑Mes). Anal. Found: C, 61.19; H, 6.28; N, 4.88. Calcd for C29H35FClN2Rh: C 61.22; H 6.20; N 4.92. Synthesis of [Rh(cod)Cl(IMesF2)] (2F2). A 0.5 M solution of KHMDS (0.24 mL, 0.12 mmol) in toluene was added dropwise to the suspension of IMesF2·HOTf (50 mg, 0.1 mmol) in THF (3 mL) at −40 °C. The resulting brown solution of the carbene IMesF2 was stirred for 15 min at this temperature, and then solid [RhCl(cod)]2 (25 mg, 0.05 mmol, 0.5 equiv) was added in one portion. The reaction mixture was slowly warmed to room temperature over a time period of 2 h. The solvent was removed under vacuum, and the residue was purified by column chromatography on silica (1 × 10 cm). Elution with toluene afforded a yellow band containing traces of unreacted complex [RhCl(cod)]2, followed by a yellow-orange band of the product that was eluted with the 10:1 toluene/THF mixture. The eluate was evaporated under vacuum to afford complex 2F2 (40 mg, 70% yield) as a yellow powder. 1H NMR (400.2 MHz, CDCl3, 25 °C): δ 7.09 (s, 2H, CHMes), 7.03 (s, 2H, CHMes), 4.59−4.52 (m, 2H, CHcod), 3.32−3.24 (m, 2H, CHcod), 2.45 (br s, 6H, CH3 o‑Mes), 2.39 (s, 3H, CH3 p‑Mes), 2.16 (br s, 6H, CH3 o‑Mes), 1.92−1.75 (m, 4H, CH2 cod), 1.62−1.50 (m, 4H, CH2 cod); 19F{1H} NMR (376.5 MHz, CDCl3, 25 °C): δ −158.0 (s) (CIm‑4,5−F); 13C{1H} NMR (100.6 MHz, CDCl3, 25 °C): δ 173.3 (dt, 1JCRh = 54.2 Hz, 3JCF = 14.6 Hz, Rh−CN2), 140.1 (s, Cp‑Mes), 138.5, 135.3 (s, Co‑Mes), 131.0 (s, Ci‑Mes), 130.1 (s, CHMes), 129.1 (dd, 1JCF = 261.4 Hz, 2JCF = 18.8 Hz, CIm‑4,5− F), 128.4 (s, CHMes), 97.1 (d, 1JCRh = 7.5 Hz, CHcod), 96.5 (d, 1JCRh = 6.9 Hz, CHcod), 68.6 (d, 1JCRh = 14.2 Hz, CHcod), 32.8, 28.5 21.4 (CH3 Mes), 19.9, 32.6, 28.6, 28.3 (s, CH2 cod), 19.8, 18.2 (br s, CH2 cod). HRMS (ESI, positive mode): m/z 551.1750. Calculated for C29H34F2N2103Rh+ (M+−Cl): 551.1740. The complex 4F2 was assessed to be >95% pure by 1H, 19F and 13C NMR spectroscopy with main impurity being residual n-hexane. Synthesis of [Rh(CO)2Cl(IMesF)] (3F). Gaseous CO was bubbled slowly through a solution of complex 2F (60 mg, 0.1 mmol) in CH2Cl2 (2 mL) under stirring for ca. 15 min. The solution was further stirred for 30 min, filtered through Celite, and evaporated to dryness. The residue was washed with hexane at −80 °C and dried under vacuum to afford complex 3F (48 mg, 95% yield) as a white powder. 1 H NMR (400.2 MHz, CDCl3, 25 °C): δ 7.04 (s, 2H, CHMes), 7.01 (s, 2H, CHMes), 6.76 (d, 3JFH = 6.7 Hz, 1H, CHIm‑5), 2.38 (s, 3H, CH3 p‑Mes), 2.37 (s, 3H, CH3 p‑Mes), 2.26 (s, 6H, CH3 o‑Mes), 2.25 (s, 6H, CH3 o‑Mes); 19F{1H} NMR (376.5 MHz, CDCl3, 25 °C): δ −145.9 (s) (CIm‑4−F); 13C{1H} NMR (100.6 MHz, CDCl3, 25 °C): δ 184.8 (d, 1JCRh = 54.6 Hz, Rh−CO), 182.7 (d, 1JCRh = 73.9 Hz, Rh− CO), 174.0 (dd, 1JCRh = 45.8 Hz, 3JCF = 11.5 Hz, Rh−CN2), 148.9 (d, 1 JCF = 267.1 Hz, CIm‑4−F), 140.4, 139.9 (s, Cp‑Mes), 138.4, 137.6 (s, Co‑Mes), 136.1 (s, Co‑Mes), 135.5 (s, Ci‑Mes), 135.3 (s, Co‑Mes), 129.9 (s, Ci‑Mes), 129.6, 129.55 (s, CHMes), 102.7 (d, 2JCF = 22.1 Hz, CHIm‑5), 21.4, 21.35 (CH3 p‑Mes), 19.0, 18.55 (s, CH3 o‑Mes). IR (CH2Cl2): νCO 2081.5 (s), 1998.5 cm−1 (s). HRMS (ESI, positive mode): m/z 494.1124. Calculated for C24H26FN3O103Rh+ (M+ − Cl − CO + MeCN): 494.1109. The complex 5F was assessed to be pure by 1H, E

DOI: 10.1021/acs.organomet.9b00151 Organometallics XXXX, XXX, XXX−XXX

Article

Organometallics 6F2 was assessed to be >95% pure by 1H, 19F and 13C NMR spectroscopy. Synthesis of IMesCl2 = Se (4Cl2). A 0.5 M solution of KHMDS (0.64 mL, 0.32 mmol, 1.1 equiv) in toluene was added dropwise to a suspension of IMes·HCl (100 mg, 0.29 mmol) in THF (10 mL) at RT. The resulting brown solution was sonicated for 15 min, and then stirred for 15 min at RT. Then, CCl4 (56 μL, 0.58 mmol) was added and the resulting dark brown solution was stirred for 40 min at RT. The solid selenium (28 mg, 0.35 mmol) was added in one portion, and the reaction mixture was stirred at room temperature overnight. The solvent was removed under vacuum, and the residue was dissolved in CH2Cl2 (2 mL) and filtered through a short pad of Celite. The solvent was removed under vacuum, and the crude product was purified by chromatography on a silica column (1 × 10 cm) using the 4:1 CH2Cl2/EtOAc mixture to afford, after solvent evaporation, the desired product 4Cl2 (90 mg, 81% yield) as a white powder. 1H NMR (400.2 MHz, CDCl3, 25 °C): δ 7.05 (s, 4H, CHMes), 2.36 (s, 6H, CH3 p‑Mes), 2.16 (s, 12H, CH3 o‑Mes); 13C{1H} NMR (100.6 MHz, CDCl3, 25 °C): δ 157.8 (s, N2CSe), 140.5 (s, Cp‑Mes), 136.1 (s, Co‑Mes), 131.4 (s, Ci‑Mes), 129.7 (s, CHMes), 114.7 (s, CIm‑4,5−Cl), 21.5 (s, CH3 p‑Mes), 18.0 (s, CH3 o‑Mes); 77Se NMR (114.5 MHz, acetoned6, 25 °C): δ 114.0 (s). Anal. Found: C, 55.73; H, 4.61; N, 6.15. Calcd for C21H22Cl2N2Se: C, 55.77; H, 4.90; N, 6.19. Synthesis of IMesCl2·HOTf. A 0.5 M solution of KHMDS (0.64 mL, 0.32 mmol) in toluene was added dropwise to the suspension of IMes HCl (100 mg, 0.29 mmol) in THF (10 mL) at RT. The resulting brown solution was sonicated for 15 min and stirred for 15 min at RT, and then CCl4 (56 μL, 0.58 mmol) was added. The resulting dark brown solution was stirred for 30 min at RT, and neat triflic (30 μL, 0.34 mmol) acid was added dropwise. The reaction mixture was stirred for 1 h at RT, the solvent was removed under vacuum, and the solid residue was purified by chromatography on a silica gel column (1 × 10 cm). Elution with CH2Cl2 afforded several bands containing unidentified impurities followed by the target product IMesCl2·HOTf, which was finally eluted with the 10:1 CH2Cl2/acetone mixture. The eluate was evaporated under vacuum and the solid residue was washed with Et2O (3 × 5 mL) and dried under vacuum to give IMesCl2 HOTf (105 mg, 69%) as a white powder. 1H NMR (400.2 MHz, CDCl3, 25 °C): δ 10.10 (s, 1H, N2CH), 7.10 (s, 4H, CHMes), 2.39 (s, 6H, CH3 p‑Mes), 2.15 (s, 12H, CH3 o‑Mes); 13C{1H} NMR (100.6 MHz, CDCl3, 25 °C): δ 142.8 (s, Cp‑Mes), 139.4 (s, N2CH), 134.9 (s, Co‑Mes), 130.3 (s, CHMes), 127.6 (s, Ci‑Mes), 121.0 (s, C− ClIm‑4,5), 21.4 (s, CH3 p‑Mes), 17.5 (s, CH3 o‑Mes). Anal. Found: C, 50.22; H, 4.25; N, 5.21. Calcd for C22H23Cl2F3N2O3S: C, 50.49; H, 4.43; N, 5.35. Synthesis of IMes·HOTf. A solution of IMes HCl (100 mg, 0.29 mmol) in CH2Cl2 (10 mL) was vigorously shaken with a solution of NaOTf (78 mg, 0.44 mmol) in water (2 mL) at RT. The organic phase was separated, dried over MgSO4, and evaporated under vacuum. The residue was washed with ether (2 × 10 mL) and dried under vacuum to afford IMes·HOTf (118 mg, 90%) as a white powder showing 1H and 13C NMR data similar to that reported previously in the literature.24 1H NMR (400.2 MHz, CDCl3, 25 °C): δ 9.14 (d, 4JHH = 1.3 Hz, 1H, N2CH), 7.57 (d, 4JHH = 1.3 Hz, 2H, CHIm‑4,5), 6.98 (s, 4H, CHMes), 2.32 (s, 6H, CH3 p‑Mes), 2.06 (s, 12H, CH3 o‑Mes); 13C{1H} NMR (100.6 MHz, CDCl3, 25 °C): δ 141.6 (s, Cp‑Mes), 138.0 (s, N2CH), 134.1 (s, Co‑Mes), 130.5 (s, Ci‑Mes), 130.0 (s, CHMes), 125.1 (s, CHIm‑4,5), 21.2 (s, CH3 p‑Mes), 17.3 (s, CH3 o‑Mes). X-ray Diffraction Study for Complex 2F. The single-crystal X-ray diffraction data for 2F were collected on a Nonius Mach 3/APEX II/ sealed Mo X-ray tube diffractometer at −173 °C. All calculations were performed on a PC compatible computer using the WinGX system.25 The structure was solved using the SIR92 program,26 which revealed in each instance the position of most of the non-hydrogen atoms. All of the remaining non-hydrogen atoms were located by the usual combination of full-matrix least-squares refinement on F2 and difference electron density syntheses using the SHELXTL program.27 Atomic scattering factors were taken from the usual tabulations. Anomalous dispersion terms for the Rh were included in Fc. All nonhydrogen atoms were allowed to vibrate anisotropically. The

hydrogen atoms were set in idealized positions The hydrogen atoms were set in idealized positions (RCH3, C−H = 0.98 Å, Uiso(H) = 1.5Ueq(C); C(sp2)−H = 0.93 Å; Uiso(H) = 1.2Ueq(C)), and their positions were refined as “riding” atoms, besides four hydrogen atoms of the coordinated diene moiety, whose positions were located from Fourier difference maps and refined with the restrained C−H distance (C(sp2)−H = 0.93 Å) and isotropic thermal parameter (Uiso(H) = 1.2Ueq(C)). CCDC 1901419 contains the supplementary crystallographic data for the structure unveiled in this paper. These data can be obtained free of charge from the Cambridge Crystallographic Data Centre via www.ccdc.cam.ac.uk/data_request/cif. Computational Details. Optimizations of NHCs were performed in a gas phase with Gaussian0928 software utilizing the B3LYP29 functional and 6−31+G(d,p) basis set.30 Molecular orbital analysis was performed using the Multiwfn program,31 and the relevant nC(σ) and 2pC(π*) carbene orbitals for IMes, IMesF, IMesF2, and IMesCl2 are presented in Figure S1.



ASSOCIATED CONTENT

S Supporting Information *

The Supporting Information is available free of charge on the ACS Publications website at DOI: 10.1021/acs.organomet.9b00151. NMR spectra for all compounds and plots of the occupied nC(σ) and empty 2pC(π*) orbitals for calculated IMesXY carbenes (PDF) Crystallographic information for complex 2F Cartesian coordinates for optimized IMesXY carbenes (XYZ) Accession Codes

CCDC 1901419 contains the supplementary crystallographic data for this paper. These data can be obtained free of charge via www.ccdc.cam.ac.uk/data_request/cif, or by emailing [email protected], or by contacting The Cambridge Crystallographic Data Centre, 12 Union Road, Cambridge CB2 1EZ, UK; fax: +44 1223 336033.



AUTHOR INFORMATION

Corresponding Authors

*E-mail: [email protected] (N.L.). *E-mail: [email protected] (V.C.). *E-mail: [email protected] (D.A.V.). ORCID

Oleg A. Filippov: 0000-0002-7963-2806 Noël Lugan: 0000-0002-3744-5252 Vincent César: 0000-0002-6203-6434 Dmitry A. Valyaev: 0000-0002-1772-844X Notes

The authors declare no competing financial interest.



ACKNOWLEDGMENTS We thank the Centre National de la Recherche Scientifique (CNRS, France) for a general support of this work. A.A.G. is grateful to French Embassy in Moscow for a joint PhD fellowship (Vernadski program). We thank Dr Mikhail M. Levitsky (INEOS RAS) for the help with a preparation of cover art material.



REFERENCES

(1) Hopkinson, M. N.; Richter, C.; Schedler, M.; Glorius, F. An overview of N-heterocyclic carbenes. Nature 2014, 510, 485−496. (2) (a) Ogba, O. M.; Warner, N. C.; O’Leary, D. J.; Grubbs, R. H. Recent advances in ruthenium-based olefin metathesis. Chem. Soc. Rev. 2018, 47, 4510−4544. (b) Froese, R. D. J.; Lombardi, C.;

F

DOI: 10.1021/acs.organomet.9b00151 Organometallics XXXX, XXX, XXX−XXX

Article

Organometallics Pompeo, M.; Rucker, R. P.; Organ, M. G. Designing Pd−NHeterocyclic Carbene Complexes for High Reactivity and Selectivity for Cross-Coupling Applications. Acc. Chem. Res. 2017, 50, 2244− 2253. (c) Janssen-Müller, D.; Schlepphorst, C.; Glorius, F. Privileged chiral N-heterocyclic carbene ligands for asymmetric transition-metal catalysis. Chem. Soc. Rev. 2017, 46, 4845−4854. (d) Melaimi, M.; Jazzar, R.; Soleilhavoup, M.; Bertrand, G. Cyclic (Alkyl)(amino)carbenes (CAACs): Recent Developments. Angew. Chem., Int. Ed. 2017, 56, 10046−10068. (3) (a) Huynh, H. V. Electronic Properties of N-Heterocyclic Carbenes and Their Experimental Determination. Chem. Rev. 2018, 118, 9457−9492. (b) Gómez-Suárez, A.; Nelson, D. J.; Nolan, S. P. Quantifying and understanding the steric properties of N-heterocyclic carbenes. Chem. Commun. 2017, 53, 2650−2660. (4) (a) Peris, E. Smart N-Heterocyclic Carbene Ligands in Catalysis. Chem. Rev. 2018, 118, 9988−10031. (b) Gaillard, S.; Renaud, J.-L. When phosphorus and NHC (N-heterocyclic carbene) meet each other. Dalton Trans. 2013, 42, 7255−7270. (c) Nasr, A.; Winkler, A.; Tamm, M. Anionic N-heterocyclic carbenes: Synthesis, coordination chemistry and applications in homogeneous catalysis. Coord. Chem. Rev. 2016, 316, 68−124. (5) (a) Arduengo, A. J.; Davidson, F.; Dias, H. V. R.; Goerlich, J. R.; Khasnis, D.; Marshall, W. J.; Prakasha, T. K. An Air Stable Carbene and Mixed Carbene “Dimers”. J. Am. Chem. Soc. 1997, 119, 12742− 12749. (b) Arduengo, A. J.; Krafczyk, R.; Schmutzler, R.; Craig, H. A.; Goerlich, J. R.; Marshall, W. J.; Unverzagt, M. Imidazolylidenes, imidazolinylidenes and imidazolidines. Tetrahedron 1999, 55, 14523− 14534. (c) Cole, M. L.; Jones, C.; Junk, P. C. Studies of the reactivity of N-heterocyclic carbenes with halogen and halide sources. New J. Chem. 2002, 26, 1296−1303. (d) Furfari, S. K.; Gyton, M. R.; Twycross, D.; Cole, M. L. Air stable NHCs: a study of stereoelectronics and metallorganic catalytic activity. Chem. Commun. 2015, 51, 74−76. (6) Sandford, G. Perfluoroalkanes. Tetrahedron 2003, 59, 437−454. (7) Kenji, A.; Masato, O.; Sensuke, O. Fluorine-substituted nitrogencontaining heterocyclic compound, and the method for producing the same. JP Patent JP20181451832018. (8) (a) Vivancos, A.; Segarra, C.; Albrecht, M. Mesoionic and Related Less Heteroatom-Stabilized N-Heterocyclic Carbene Complexes: Synthesis, Catalysis, and Other Applications. Chem. Rev. 2018, 118, 9493−9586. (b) Crabtree, R. H. Abnormal, mesoionic and remote N-heterocyclic carbene complexes. Coord. Chem. Rev. 2013, 257, 755−766. (9) Electrophilic fluorination of silver complexes bearing sixmembered mesoionic isoquinolin-4-ylidene ligands has been reported: Liu, Q.; Yuan, Z.; Wang, H.; Li, Y.; Wu, Y.; Xu, T.; Leng, X.; Chen, P.; Guo, Y.; Lin, Z.; Liu, G. Abnormal Mesoionic Carbene Silver Complex: Synthesis, Reactivity, and Mechanistic Insight on Oxidative Fluorination. ACS Catal. 2015, 5, 6732−6737. (10) (a) Grineva, A. A.; Valyaev, D. A.; César, V.; Filippov, O. A.; Khrustalev, V. N.; Nefedov, S. E.; Lugan, N. Oxidative Coupling of Anionic Abnormal N-Heterocyclic Carbenes: Efficient Access to Janus-Type 4,4′-Bis(2H-imidazol-2-ylidene)s. Angew. Chem., Int. Ed. 2018, 57, 7986−7991. (b) Valyaev, D. A.; Uvarova, M. A.; Grineva, A. A.; César, V.; Nefedov, S. N.; Lugan, N. Post-coordination backbone functionalization of an imidazol-2-ylidene and its application to synthesize heteropolymetallic complexes incorporating the ambidentate IMesCO2− ligand. Dalton Trans. 2016, 45, 11953−11957. (11) Wang, Y.; Xie, Y.; Abraham, M. Y.; Wei, P.; Schaefer, H. F.; Schleyer, P. v. R.; Robinson, G. H. A Viable Anionic N-Heterocyclic Dicarbene. J. Am. Chem. Soc. 2010, 132, 14370−14372. (12) (a) Waters, J. B.; Goicoechea, J. M. Coordination chemistry of ditopic carbanionic N-heterocyclic carbenes. Coord. Chem. Rev. 2015, 293−294, 80−94. (b) Uzelac, M.; Hevia, E. Polar organometallic strategies for regioselective C−H metallation of N-heterocyclic carbenes. Chem. Commun. 2018, 54, 2455−2462. (13) (a) Solovyev, A.; Lacôte, E.; Curran, D. P. Ring Lithiation and Functionalization of Imidazol-2-ylidene-boranes. Org. Lett. 2011, 13, 6042−6045. (b) Vogt, M.; Wu, C.; Oliver, A. G.; Meyer, C. J.;

Schneider, W. F.; Ashfeld, B. L. Site specific carboxylation of abnormal anionic N-heterocyclic dicarbenes with CO2. Chem. Commun. 2013, 49, 11527−11529. (c) Fukaya, N.; Mizusaki, T.; Hatakeyama, K.; Seo, Y.; Inaba, Y.; Matsumoto, K.; Lee, V. Y.; Takagi, Y.; Kuwabara, J.; Kanbara, T.; Choe, Y.-K.; Choi, J.-C. [Pd(4-R3SiIPr)(allyl)Cl], a Family of Silyl-Substituted Pd−NHC Complexes: Catalytic Systems for the Buchwald−Hartwig Amination. Organometallics 2018, 38, 375−384. (14) Baudoux, J.; Cahard, D. Electrophilic fluorination with N−F reagents. Org. React. 2008, 69, 347−672. (15) Noteworthy, the reaction between free IMes and NFSI only led to intractable mixture of products. (16) Evans, P. A.; Baum, E. W.; Fazal, A. N.; Pink, M. Diastereoselective metal-catalyzed [4+2+2] carbocyclization reactions utilizing a rhodium N-heterocyclic carbene (NHC) complex: the first example of a rhodium NHC-catalyzed [m+n+o] carbocyclization. Chem. Commun. 2005, 63−65. (17) Gusev, D. G. Electronic and Steric Parameters of 76 NHeterocyclic Carbenes in Ni(CO)3(NHC). Organometallics 2009, 28, 6458−6461. (18) Verlinden, K.; Buhl, H.; Frank, W.; Ganter, C. Determining the Ligand Properties of N-Heterocyclic Carbenes from 77Se NMR Parameters. Eur. J. Inorg. Chem. 2015, 2416−2425. (19) (a) Liske, A.; Verlinden, K.; Buhl, H.; Schaper, K.; Ganter, C. Determining the π-Acceptor Properties of N-Heterocyclic Carbenes by Measuring the 77Se NMR Chemical Shifts of Their Selenium Adducts. Organometallics 2013, 32, 5269−5272. (b) Vummaleti, S. V. C.; Nelson, D. J.; Poater, A.; Gomez-Suarez, A.; Cordes, D. B.; Slawin, A. M. Z.; Nolan, S. P.; Cavallo, L. What can NMR spectroscopy of selenoureas and phosphinidenes teach us about the π-accepting abilities of N-heterocyclic carbenes? Chem. Sci. 2015, 6, 1895−1904. (20) Ruamps, M.; Lugan, N.; César, V. A Cationic N-Heterocyclic Carbene Containing an Ammonium Moiety. Organometallics 2017, 36, 1049−1055. (21) Giordano, G.; Crabtree, R. H.; et al. Di-μ-chloro-bis(η4-1,5cyclooctadiene)dirhodium(I). Inorg. Synth. 1990, 28, 88−90. (22) Hintermann, L. Expedient syntheses of the N-heterocyclic carbene precursor imidazolium salts IPr·HCl, IMes·HCl and IXy·HCl. Beilstein J. Org. Chem. 2007, 3, No. 22. (23) Fulmer, G. R.; Miller, A. J. M.; Sherden, N. H.; Gottlieb, H. E.; Nudelman, A.; Stoltz, B. M.; Bercaw, J. E.; Goldberg, K. I. NMR Chemical Shifts of Trace Impurities: Common Laboratory Solvents, Organics, and Gases in Deuterated Solvents Relevant to the Organometallic Chemist. Organometallics 2010, 29, 2176−2179. (24) Kim, J. H.; Jo, K. A.; Son, Y. H.; Park, S. R.; Ahn, K.-H.; Kang, E. J. Structural Elucidation and AQ3: Please provide a DOI number for ref 24 or indicate if one doesn’t exist.Characterization of N-Heterocyclic Salts with Various Anions. Bull. Korean Chem. Soc. 2009, 2464−2466. (25) Farrugia, L. J. WinGX and ORTEP for Windows: an update. J. Appl. Crystallogr. 2012, 45, 849−854. (26) Altomare, A.; Cascarano, G.; Giacovazzo, C.; Guagliardi, A.; et al. SIR92 − a program for automatic solution of crystal structures by direct methods. J. Appl. Crystallogr. 1994, 27, 435−436. (27) Sheldrick, G. M. A short history of SHELX. Acta Crystallogr., Sect. A: Found. Crystallogr. 2008, 64, 112. (28) Frisch, M. J.; Trucks, G. W.; Schlegel, H. B.; Scuseria, G. E.; Rob, M. A.; Cheeseman, J. R., Jr.; J. A., Montgomery; Vreven, T.; Kudin, K. N.; Burant, J. C.; Millam, J. M.; Iyengar, S. S.; Tomasi, J.; Barone, V.; Mennucci, B.; Cossi, M.; Scalmani, G.; Rega, N.; Petersson, G. A.; Nakatsuji, H.; Hada, M.; Ehara, M.; Toyota, K.; Fukuda, R.; Hasegawa, J.; Ishida, M.; Nakajima, T.; Honda, Y.; Kitao, O.; Nakai, H.; Klene, M.; Li, X.; Knox, J. E.; Hratchian, H. P.; Cross, J. B.; Bakken, V.; Adamo, C.; Jaramillo, J.; Gomperts, R.; Stratmann, R. E.; Yazyev, O.; Austin, A. J.; Cammi, R.; Pomelli, C.; Ochterski, J. W.; Ayala, P. Y.; Morokuma, K.; Voth, G. A.; Salvador, P.; Dannenberg, J. J.; Zakrzewski, V. G.; Dapprich, S.; Daniels, A. D.; Strain, M. C.; Farkas, O.; Malick, D. K.; Rabuck, A. D.; Raghavachari, K.; Foresman, G

DOI: 10.1021/acs.organomet.9b00151 Organometallics XXXX, XXX, XXX−XXX

Article

Organometallics J. B.; Ortiz, J. V.; Cui, Q.; Baboul, A. G.; Clifford, S.; Cioslowski, J.; Stefanov, B. B.; Liu, G.; Liashenko, A.; Piskorz, P.; Komaromi, I.; Martin, R. L.; Fox, D. J.; Keith, T.; Al-Laham, M. A.; Peng, C. Y.; Nanayakkara, A.; Challacombe, M.; Gill, P. M. W.; Johnson, B.; Chen, W.; Wong, M. W.; Gonzalez, C.; Pople, J. A. Gaussian 09, revision D.01; Gaussian, Inc.: Wallingford, CT, 2009. (29) (a) Becke, A. D. Density-Functional Thermochemistry. The Role of Exact Exchange. J. Chem. Phys. 1993, 98, 5648−5652. (b) Stephens, P. J.; Devlin, F. J.; Chabalowski, C. F.; Frisch, M. J. AbInitio Calculation of Vibrational Absorption and Circular-Dichroism Spectra Using Density-Functional Force-Fields. J. Phys. Chem. 1994, 98, 11623−11627. (30) (a) Hehre, W. J.; Ditchfield, R.; Pople, J. A. Self-Consistent Molecular Orbital Methods. XII. Further Extensions of Gaussian Type Basis Sets for Use in Molecular Orbital Studies of Organic Molecules. J. Chem. Phys. 1972, 56, 2257−2261. (b) Clark, T.; Chandrasekhar, J.; Spitznagel, G. W.; Schleyer, P. V. R. Efficient diffuse function-augmented basis sets for anion calculations. III. The 3-21+G basis set for first-row elements, Li−F. J. Comput. Chem. 1983, 4, 294−301. (c) Francl, M. M.; Pietro, W. J.; Hehre, W. J.; Binkley, J. S.; Gordon, M. S.; DeFrees, D. J.; Pople, J. A. Self-consistent molecular orbital methods. XXIII. A polarization-type basis set for second-row elements. J. Chem. Phys. 1982, 77, 3654−3665. (d) Frisch, M. J.; Pople, J. A.; Binkley, J. S. Self-consistent molecular orbital methods 25. Supplementary functions for Gaussian basis sets. J. Chem. Phys. 1984, 80, 3265−3269. (31) Lu, T.; Chen, F. Multiwfn: a multifunctional wavefunction analyzer. J. Comput. Chem. 2012, 33, 580−592.

H

DOI: 10.1021/acs.organomet.9b00151 Organometallics XXXX, XXX, XXX−XXX