Direct measurement of the in-plane thermal diffusivity of

May 31, 2019 - We present an extension of the well-known slopes method for characterization of the in-plane thermal diffusivity of semitransparent pol...
3 downloads 0 Views 775KB Size
Subscriber access provided by UNIV AUTONOMA DE COAHUILA UADEC

Article

Direct measurement of the in-plane thermal diffusivity of semitransparent thin films by lock-in thermography: an extension of the slopes method Alexandra Philipp, Nelson Pech-May, Bernd A.F. Kopera, Anna M. Lechner, Sabine Rosenfeldt, and Markus Retsch Anal. Chem., Just Accepted Manuscript • DOI: 10.1021/acs.analchem.9b01583 • Publication Date (Web): 31 May 2019 Downloaded from http://pubs.acs.org on June 2, 2019

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 20 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Analytical Chemistry

Direct measurement of the in-plane thermal diffusivity of semitransparent thin films by lock-in thermography: an extension of the slopes method Alexandra Philipp1, Nelson W. Pech-May1**, Bernd A. F. Kopera1, Anna M. Lechner1, Sabine Rosenfeldt1, Markus Retsch1* 1University

of Bayreuth, Department of Chemistry, Universitaetsstr. 30, 95447 Bayreuth, Germany *E-mail: [email protected] **E-mail: [email protected]

Abstract We present an extension of the well-known slopes method for characterization of the in-plane thermal diffusivity of semitransparent polymer films. We introduce a theoretical model which considers heat losses due to convection and radiation mechanisms, as well as semitransparency of the material to the exciting laser heat source (visible range) and multiple reflections at the film surfaces. Most importantly, a potential semitransparency of the material in the IR detection range is also considered. We prove by numerical simulations and by an asymptotic expansion of the surface temperature that the slopes method is also valid for any semitransparent film in the thermally thin regime. Measurements of the in-plane thermal diffusivity performed on semitransparent polymer films covering a wide range of absorption coefficients (to the exciting wavelength and in the IR detection range of our IR camera) validate our theoretical findings.

1 ACS Paragon Plus Environment

Analytical Chemistry 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 20

1. Introduction Lock-in thermography is a well-known technique for accurate determination of the in-plane thermal diffusivity of solids.1-4 In recent decades, it has attracted the attention of scientists due to its non-contact and non-invasive attributes. Moreover, lock-in thermography has shown versatility for materials characterization, in non-destructive testing and evaluation as well as in biomedical applications.5-6 In particular, for thermal characterization of isotropic solids, the “slopes method”2, 7 has been widely used. Therefore, a free-standing sample is periodically heated by a focused optical source. The temperature oscillations as a function of the radial coordinate are detected, typically using an infrared (IR) camera. The thermographic signal (amplitude 𝑇 and phase Ψ) is either derived from the front-face2 or the rear-face configuration1, i.e., from the non-illuminated face. The thermographic signals (ln(amplitude) and phase) far from the heating spot vary linearly with radial distance under the precondition of isotropic opaque thin films in the thermally thin regime (film thickness