Alkynylated Phenazines: Synthesis ... - American Chemical Society

Aug 15, 2012 - Alkynylated Phenazines: Synthesis, Characterization, and Metal-. Binding Properties of Their Bis-Triazolyl Cycloadducts. Jonathan J. Br...
2 downloads 0 Views 984KB Size
Subscriber access provided by Columbia Univ Libraries

Article

Alkynylated Phenazines: Synthesis, Characterization, and Metal-Binding Properties of Their Bis-triazolyl Cycloadducts Jonathan J. Bryant, Yexiang Zhang, Evan A. Davey, Anthony Lucas Appleton, Benjamin Daniel Lindner, Xuhong Qian, and Uwe H. F. Bunz J. Org. Chem., Just Accepted Manuscript • DOI: 10.1021/jo3012978 • Publication Date (Web): 15 Aug 2012 Downloaded from http://pubs.acs.org on August 19, 2012

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

The Journal of Organic Chemistry is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Organic Chemistry

Alkynylated Phenazines: Synthesis, Characterization, and MetalBinding Properties of Their Bis-triazolyl Cycloadducts Jonathan J. Bryant†1, Yexiang Zhang‡║1, Benjamin D. Lindner†, Evan A. Davey‡, Anthony Lucas Appleton‡, Xuhong Qian║, U. H. F. Bunz†‡* †

Organisch Chemisches Institut, Universität Heidelberg, Im Neuenheimer Feld 270 Heidelberg, 69120 Germany ‡

School of Chemistry and Biochemistry, Georgia Institute of Technology, 901 Atlantic Dr. Atlanta, GA 30332 USA ║

Shanghai Key Laboratory of Chemical Biology, State Key Laboratory of Bioreactor Engineering, School of Pharmacy, East China University of Science and Technology, Shanghai, 200237, China [email protected] 1

These authors contributed equally to this work

Abstract We have synthesized a series of ethynylated phenazines and their bis-triazolyl cycloadducts to serve as metal ion sensors. Binding of metal ions is achieved through coordination to the phenazine nitrogen atom and the triazole ring. To allow metal-sensing in aqueous solution, the triazole units are substituted with water-soluble ethylene glycol chains. These phenazine cycloadducts exhibit a selective affinity for binding silver ions. Examination of the halogenated ACS Paragon Plus Environment

The Journal of Organic Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

analogues reveals a lowering of the band gap, and the corresponding bathochromic shifts in the absorption and emission spectra. The electron-withdrawing properties of these halogens also result in significantly decreased metal binding activity of the phenazine cycloadducts. Introduction The redox properties of phenazine and its derivatives have garnered some interest, finding use in biofuel cells,1 solar cells,2 and OLEDs,3-5 but an even more attractive aspect of phenazines is their role in pharmaceutical applications. They are biosynthesized by bacteria and many possess broadspectrum antifungal and antibiotic activity,6-8 as well as the capacity for DNA intercalation.9,10 Sensing schemes involving water-soluble phenazine-based dyes include electrochemical detection of biological molecules11,12 and colorimetric pH sensing.13 Less attention has been paid to phenazines themselves, though they have demonstrated the ability to bind silver14, and their peralkynylated counterparts have also shown an affinity for binding metals.15 We decided to further investigate the metal-binding properties of alkynylated phenazine derivatives. The ethynyl functional group can be transformed via the alkyne-azide 1,3-dipolar cycloaddition pioneered by Huisgen.16,17 Since the discovery of Cu(I) as a catalyst for this reaction,18,19 this ‘click’ chemistry has flourished,20-23 appearing in bioconjugation,24,25 polymer and materials chemistry,26-32 and organic synthesis.33 With regards to heteroaromatic molecules, the triazole ring influences the electronic properties,34,35 and its electron-donating ability can be used to bind metal ions.36,37 Functionalization of the phenazine core with a sufficiently hydrophilic azide produces a watersoluble fluorophore suitable for metal ion detection. We previously reported water-soluble metal sensors with benzo- and naphtho-thiadiazole at their core, synthesized by the addition of triethylene glycol-substituted azides to the alkynylated thiadiazoles.38 The hydrophilic arms ACS Paragon Plus Environment

Page 2 of 28

Page 3 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Organic Chemistry

provide water solubility, while the triazole moiety forms an efficient binding pocket with the nitrogen of the thiadiazole. Introduction of a branched ethylene glycol side chain on the triazole should further improve the solubility in water, as well as the quantum efficiency of the fluorophore, thanks to its aggregation-suppressing ability.39 Some fluorescence based silver ion sensors are known,40-45 but with exception of the recent Ptcontaining polyfluorene,42 they do not work in water. THF or ethanol is used, which is not optimal, and also avoids the thorny issues of the preservation of fluorescence in water and the competition of water as a ligand. Here, we report on a series of ethynylated phenazines, and the successful application of the silver ion-sensing capabilities of their triazolyl cycloadducts in water. Results and Discussion The synthesis of the alkynylated phenazines and their corresponding cycloadducts is shown in Scheme 1. Alkynylated phenazines 4a-d and 5a-d were synthesized via condensation of 1 or 2 with 3a-d. Ethanol was used as a solvent, but in the case of the fluorinated compounds, nucleophilic solvents had to be avoided, as they undergo substitution side reactions at the fluorinated carbons. Scheme 1. Synthesis of Cycloadducts 8 and 9

ACS Paragon Plus Environment

The Journal of Organic Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

From the trimethylsilyl-protected phenazine core 4a-c, deprotection with potassium carbonate gave 6a-c. To avoid degradation of 6, reaction with either 7a or 7b was carried out immediately to give 8 or 9. The targets 9a-b were obtained in 27-30% yield, while the TEG-substituted 8a and 8c formed in 46-61% yield. The poor yields for this well-known reaction prompted us to vary the conditions slightly. Water has been postulated as an ideal solvent for stabilization of copper acetylide intermediates,46 but the presence of water as co-solvent had no effect on our reaction, though it is necessary when using CuSO4 as catalyst. Performing the reaction at elevated temperatures (50˚C) did not improve the yield, nor did variation of the copper catalyst (Cu(PPh3)3Br or CuSO4/ascorbate). Due to the reactive nature of the ethynylated species 6, a one-

ACS Paragon Plus Environment

Page 4 of 28

Page 5 of 28

pot deprotection/cycloaddition reaction would be ideal; however, such attempts turned out to be less reliable overall, and in the best case, resulted in a similar yield. Figure 1 shows the absorption spectra of the bis-ethynylphenazines 5a-c and 6a-c. The TMS- and TIPS-protected compounds show very similar absorption spectra, with less distinct local maxima for the TMS-protected series (similar to the broad spectra of 5b). Halogen substitution causes red-shifts which increase upon descending in the group. The same effect is seen in the emission profiles (Figure 2), with the exception of the bromine-substituted phenazine, which is nonemissive. The heavy atom effect of the bromine leads to the decrease of the fluorescence quantum yield of 5d. The optical properties of 5a-d are summarized in Table 1 and are consistent with the previously reported properties of halogenated azaacenes47 and pentacenes.48

4a 2

4b 4c 5a

5b

1.5

Absorbance (a.u.)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Organic Chemistry

5c 6a 6b

1

6c

0.5

0 325

375

425

475

Wavelength (nm)

Figure 1. Absorption spectra of 5a-c and 6a-c in dichloromethane

ACS Paragon Plus Environment

525

575

The Journal of Organic Chemistry

1

4a 4b 4c

0.8

Fluorescent Intensity (a.u.)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 6 of 28

5a 5b 5c

0.6

6a 6b 6c

0.4

0.2

0 400

450

500

550

600

650

700

750

Wavelength (nm)

Figure 2. Emission spectra of 5a-c and 6a-c in dichloromethane Table 1. Photophysical Properties Recorded for Compounds 5a-d in DCM

-1

Compound

Abs. λmax (nm)

Em. λmax (nm)

Stokes Shift (cm )

Φf ± 0.1

τf (ns)

5a

416

492

3710

0.02

0.37

5b

443

528

3630

0.50

10

5c

451

540

3650

0.11

2.5

5d

453

n/a

n/a

n/a

n/a

To gain further insight into the spectral properties of these compounds, we performed quantum chemical calculations. The calculated energies of the frontier orbitals and a comparison of the experimental and calculated band gaps are recorded in Table 2. Upon chlorination of the alkynylated phenazine, the LUMO is stabilized by 0.49 eV, whereas the HOMO is stabilized by only 0.30 eV. This results in a lowering of the optical gap by 0.19 eV, which agrees closely with the experimentally observed change of 0.20 eV. From the visual representations of the frontier

ACS Paragon Plus Environment

Page 7 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Organic Chemistry

molecular orbitals (Figure 3a), it is apparent that the coefficients of the HOMO on the halogenated ring are smaller than those of the LUMO. Therefore, the stabilizing effect of halogenation is greater for the LUMO than the HOMO, resulting in the observed bathochromic shifts. This effect is seen to a greater extent in the cycloaddition products, where the HOMOs are located almost exclusively on the triazole-containing axis, resulting in even greater bathochromic shifts upon halogenation. Table 2. Calculated and Experimental HOMO-LUMO Gaps (gas phase) Compound

HOMO (eV)

6a 6b 6c c 9a c 9b c 8c

-6.24 -6.60 -6.54 -5.81 -6.13 -6.10

a

LUMO (eV)

a

calc. gap (eV)

exp. gap (eV)

3.13 3.00 2.94 2.80 2.62 2.54

2.96 2.85 2.76 2.76 2.59 2.53

-3.11 -3.60 -3.60 -3.01 -3.51 -3.56

b

a c

Calculated by SPARTAN 10 using the B3LYP method with the 6-311++G** basis set. bAcquired from the λmax of absorption. Triazole substituent approximated by a methyl group.

What is the conformation of the triazole unit with respect to the phenazine ring? Quantum chemical calculations always give the rotamer, in which the C-H-group is close to the N-unit of the phenazine nucleus, and never the one in which the bidentate binding pocket is formed. We calculated the internal rotation around the C-C-bond that connects the phenazine with the triazole rings (Figure 3b, B3LYP-6-311++G**). The rotamer forming the binding pocket is ca. 9 kcal mol-1 higher in energy. The reason for the energy difference is probably the mutual electrostatic repulsion of the two adjacent electron pairs of the participating heterocyclic nitrogens (Figure 3b,c). Upon the coordination of silver ions the binding pocket forms through rotation. We have calculated the structure of the Ag+ complex of a simplified model (Figure 3d, B3LYP 6-31G**) in the absence of further ligands. The silver ion forces the ligand into a conformation that ACS Paragon Plus Environment

The Journal of Organic Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

accommodates the cation optimally. This conformation is not planar but has a torsion angle of around 40˚. Additionally, one can see that in the optimized structure the distance of the triazole nitrogen to the silver cation is 2.24 Å, while the distance to the phenazine nitrogen is 2.35 Å. Upon fluorination of the unsubstituted part of the phenazine, the geometry changes and the Agtriazole distance is reduced to 2.21 Å, while the distance to the now much more electron poor phenazine is increased to 2.45 Å. As a consequence of the geometrical change the torsion angle is now only 35˚. While these are only gas phase calculations without added ligands or counter ions, they are supported by 2D 1H-1H NOESY NMR (see supporting info). In the absence of silver, the predicted rotamer is observed, with no interaction between the triazole hydrogen and the aromatic hydrogen (at the 2 or 3 position). After addition of silver ion, there is a clear interaction between these hydrogen atoms, made possible through the rotation of the triazole ring.

ACS Paragon Plus Environment

Page 8 of 28

Page 9 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Organic Chemistry

Figure 3. a) Frontier orbitals for 6a-c (top) and simplified models of 9a-c (bottom). b) Electrostatic potential map highlighting the localization of electron density on the nitrogen atoms, particularly those of the triazole ring. c) Rotational profile of a simplified model of 8a and 9a. The left conformation (green) displays the lowest relative energy. The other conformation is 8.96 kcal mol-1 higher in energy. d) Simplified model of 8b and 9b showing the predicted conformation when binding to Ag+.

ACS Paragon Plus Environment

The Journal of Organic Chemistry

Figure 4 shows the absorption spectra of 9a-b and 8c in both water and dichloromethane. Though these compounds are soluble in both solvents, there is a considerable hypsochromic shift in the absorption profiles when going from organic to aqueous solvent, as much as 30 nm. This trend exists to a varying degree in each of the cycloadducts. The reverse occurs in the emission spectra (Figure 5), with aqueous solvent inducing either a bathochromic shift or none at all. A large Stokes shift results in water. Variation of the water-soluble triazole substituent does not have any appreciable effect on the absorption or emission. The spectra of 8a are nearly identical to those of 9a and are therefore not shown.

2

9a (DCM) 9a (H2O) 9b (DCM) 9b (H2O)

1.5

8c (DCM)

Absorbance (a. u.)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 10 of 28

8c (H2O)

1

0.5

0 350

400

450

500

550

600

650

Wavelength (nm)

Figure 4. Absorption spectra of the cycloadducts 9a-b and 8c in water and dichloromethane

ACS Paragon Plus Environment

Page 11 of 28

1 9a (DCM) 9a (H2O)

9b (DCM)

0.8

Fluorescent Intensity (a. u.)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Organic Chemistry

9b (H2O) 8c (DCM) 8c (H2O) 0.6

0.4

0.2

0 460

510

560

610

660

710

760

Wavelength (nm)

Figure 5. Fluorescence spectra of the cycloadducts 9a-b and 8c in water and dichloromethane The phenazine cycloadducts (Table 3) possess rather long lifetimes (greater than 10 ns in organic solvents). It is unclear how much this is due to the phenazine core. The radiative rate of phenazine is very low; the dominant decay pathway from the excited singlet states is intersystem crossing to the triplet states.49,50

The low quantum yield of the alkynylated phenazine 5a

indicates that non-radiative decay is still efficient. Further substitution of the phenazine ring (with halogens or triazole rings) increases the quantum yield, as well as the lifetime (Table 1). The cycloadducts 8 and 9 have even longer lifetimes, suggesting the triazole rings to modulate the photophysical properties of the molecules.

ACS Paragon Plus Environment

The Journal of Organic Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 12 of 28

Table 3. Photophysical Data for 8 and 9

-1

Abs. λmax (nm)

Em. λmax (nm)

DCM

H2O

DCM

H2O

DCM

H2O

DCM

H2O

DCM

H2O

8a

450

433

559

573

4333

5643

0.31

0.01

19

1.7

9a

458

428

559

569

3945

5790

0.27

0.04

19

4.0

9b

479

448

603

604

4293

5765

0.04

7.9

4.5

8c

496

486

610

619

3768

4421

0.06

< 0.01 < a 0.01

16

6.8

Stokes Shift (cm )

Φf ± 0.1

τf (ns)

Compound

a

a

determined in MeOH/H2O

The ready solubility of the bis-triazolylphenazine adducts in water and the acceptable quantum yield of 9a allow the examination of its metal binding properties in aqueous solution. Screened metals include Na+, K+, Li+, Ag+, Mg2+, Ca2+ Zn2+, Cu2+, Ni2+, Hg2+, Cd2+, and Pb2+. The halogenated fluorophores showed little if any response to metal ions. These are apparently so electron-poor as to preclude efficient metal binding in water. For the unsubstituted phenazine cycloadducts 8a and 9a, only minimal quenching upon exposure to Cu2+ and Hg2+ was observed. As seen in Figure 6, the fluorescence quenching by Ag+ was pronounced, indicating that these compounds may serve as a fluorescent sensor for silver ions.

ACS Paragon Plus Environment

Page 13 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Organic Chemistry

Figure 6. Relative fluorescence quenching of 9aby metal ions in water.

Due to the increasing prevalence of silver in industrial applications, and its toxicity, the U.S. Environmental Protection Agency has set a secondary maximum contaminant level of 0.1 mg/L for silver.51 As a result, there exists a desire for sensitive and selective methods of silver ion detection in aqueous media. As fluorescent sensors, the phenazine cycloadducts possess attractive properties. Their Stokes shifts are quite large (>5000 cm-1), allowing the excitation wavelength to be far removed from the emission wavelength. The auxochromic effect of the triazole units pushes the luminescence of these compounds from the blue/green region to the yellow and beyond, allowing cellular background fluorescence to be easily filtered out. The lifetimes are also relatively long, enabling such techniques as time-gated detection, though the lifetimes are lower in water than in dichloromethane.

ACS Paragon Plus Environment

The Journal of Organic Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 14 of 28

Titrations of 8a and 9a with AgNO3 were performed to determine the strength of the binding. Significant deviation from linearity occurred when the data were fitted to the typical SternVolmer equation. The data however could be fitted well by equation 1,52-54

(1)

where ΔI is the change in fluorescent intensity, [F] is the concentration of the fluorophore, [Q] is the concentration of the quencher, and α is a constant. The binding constant K can be extracted from equation 1 using a non-linear least-squares curve fitting. The titration curve is shown in Figure 7. The data agree with a 1:1 binding ratio, which is also supported by 1H-1H NOESY NMR (see supporting info). The binding constant for silver(I) was determined to be log(K) = 3.75 ± 0.09 for 8a and log(K) = 2.84 ± 0.02 for 9a.

Figure 7. Representative titration (inset) and binding curve of 8a ACS Paragon Plus Environment

Page 15 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Organic Chemistry

Previous evidence that phenazine14 and peralkynylated phenazine15 are able to bind silver begs the question of whether the triazole is necessary for the binding event. We investigated the interaction of bare phenazine and alkynylated phenazine 5a with silver ions. Titrations of the three different phenazine compounds (including the cycloadduct 8a) were performed in ethanol, which provides sufficient solubility and is somewhat comparable to water. Complex formation between silver ion and phenazine itself was observed only at excess concentrations of silver (>105 equivalents), and no binding constant could be extracted. The binding constant for 8a was determined to be log K = 3.44 ± 0.05, similar to the result obtained in water, while the value for 5a was significantly lower (log K = 2.70 ± 0.02). The participation of the triazole ring serves to strengthen the binding affinity towards silver ions, though it is not strictly necessary. The selectivity of the phenazine cycloadducts for silver ion stems from the phenazine, and adjustment of the electronic properties of the phenazine core leads to changes in the metal-binding activity. The more electron-poor halogen-substituted phenazine compounds are unable to bind metal ions, despite the presence of the triazole. Interestingly, the cycloadduct 8a is more sensitive to Ag(I) than 9a. This suggests that the ethylene glycol side chains interfere with the binding of silver in some way, but the exact nature of this interaction is not clear. Conclusion Water-soluble bis-triazolyl cycloadducts were synthesized from hitherto unknown alkynylated phenazines to serve as selective silver ion sensors. Halogenation of the phenazine core lowers the band gap of these materials, and also diminishes the capacity for metal binding. The properties of these phenazine cycloadducts and their selectivity for silver ions make them promising aqueous fluorescent sensors for silver ions, while the known biological activity of phenazine derivatives hints that these water-soluble phenazine cycloadducts may yet prove useful in other areas.

ACS Paragon Plus Environment

The Journal of Organic Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 16 of 28

Experimental Quantum yield measurements were measured relative to an appropriate standard (quinine sulfate in dilute sulfuric acid, or fluorescein in dilute sodium hydroxide solution). Time-correlated single photon counting lifetime measurements were made with a pulsed laser diode. 3,6-Bis((trimethylsilyl)ethynyl)benzene-1,2-diamine (1) 4,7-Bis((trimethylsilyl)ethynyl)benzo[c][1,2,5]thiadiazole55-57 (5.19 g, 15.8 mmol) and dry THF (50 mL) were added to an oven dried Schlenk flask, which was purged with nitrogen gas and cooled to 0˚C. Lithium aluminum hydride (1.50 g, 39.5 mmol) was slowly added to the reaction mixture over a period of 30 minutes. The reaction was then allowed to stir for 30 minutes under nitrogen, at which point it was slowly quenched with saturated aqueous NH4Cl (30 mL) at 0˚C. The resulting product was extracted with diethyl ether (3 x 200 mL), dried over magnesium sulfate, and the solvent was removed under reduced pressure. Purification by silica gel chromatography (9:1 hexanes:Et2O) gave compound 1 as an air-sensitive yellow solid (4.31 g, 14.3 mmol, 91% yield). mp = 140-144˚C; IR (cm-1): 3425, 3420, 3335, 3075, 2956, 2897, 2788, 2142, 1616, 1608, 1451, 1411, 1247, 1245, 1184, 1123; 1H NMR (400 MHz, CDCl3):  = 6.77 (s, 2H), 3.94 (s, 4H), 0.26 (s, 18H);

13

C NMR (100 MHz, CDCl3):  = 136.9, 122.4, 110.0, 102.1,

101.3, 0.4; HRMS (EI) m/z: [M]+ Calcd for C16H24N2Si2 = 300.1478; Found = 300.1472. 3,6-Bis((triisopropylsilyl)ethynyl)benzene-1,2-diamine (2) 4,7-Bis((triisopropylsilyl)ethynyl)benzo[c][1,2,5]thiadiazole55-57 (3.26 g, 6.56 mmol) and dry THF (50 mL) were added to an oven dried Schlenk flask, which was purged with nitrogen gas and cooled to 0˚C. Lithium aluminum hydride (0.622 g, 16.4 mmol) was slowly added to the reaction mixture over a period of 30 minutes. The reaction was then allowed to stir for 12 hours

ACS Paragon Plus Environment

Page 17 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Organic Chemistry

under nitrogen, at which point it was slowly quenched with saturated aqueous NH4Cl (30 mL) at 0˚C. The resulting product was extracted with diethyl ether (3 x 200 mL), dried over magnesium sulfate, and the solvent was removed under reduced pressure. Purification by silica gel chromatography (9:1 hexanes:Et2O) gave compound 2 as an air-sensitive light yellow solid (2.92 g, 6.23 mmol, 95% yield). mp = 127-129˚C; IR (cm-1): 3436, 3328, 3070, 2954, 2862, 2715, 2611, 2140, 1612, 1481, 1269, 1384, 1361, 1253, 1184; 1H NMR (400 MHz, CDCl3):  = 6.80 (s, 2H), 3.97 (s, 4H), 1.14 (s, 42H);

13

C NMR (75 MHz, CDCl3):  = 136.9, 122.5, 110.3, 104.0,

97.5, 19.1, 11.6; HRMS (EI) m/z: [M]+ Calcd for C28H48N2Si2 = 468.3356; Found = 468.3359. General Procedure 1 The diamine (1 or 2) was added to a solution of 3 in EtOH (10 mL) or DCM (50 mL), along with AcOH (3 mL). The reaction mixture was stirred overnight (~16 h). The solution was then extracted with saturated aqueous NaHCO3 (50 mL) and DCM (2 x 50 mL). The organic fractions were collected and dried over sodium sulfate, the solvent was removed under reduced pressure, and the product was purified by silica gel chromatography. 1,4-Bis((trimethylsilyl)ethynyl)phenazine (4a) The ortho-benzoquinone was freshly prepared by stirring a solution of catechol (1.10 g, 9.98 mmol) in CHCl3 (200 mL) into a solution of K2Cr2O7 (5.88 g, 20.0 mmol) in 1 M H2SO4 (100 mL). After stirring for 10 min. at room temperature, the organic fraction was collected, the solvent was removed under reduced pressure, and the benzoquinone was reacted with 1 (1.00 g, 3.33 mmol) according to general procedure 1, using EtOH as solvent. The reaction mixture was heated to 40˚C and stirred overnight at this temperature. Purification by silica gel chromatography (3:1 hexanes:DCM) gave the product 4a as a yellow solid (780. mg, 2.09 mmol,

ACS Paragon Plus Environment

The Journal of Organic Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 18 of 28

63%). mp = 166-168˚C; IR (cm-1): 3089, 3040, 2963, 2954, 2897, 2152, 1919, 1518, 1473, 1406, 1281, 1138, 1118, 1025; 1H NMR (400 MHz, CDCl3):  = 8.29 (dd, J = 3.4 Hz, J = 6.7 Hz, 2H), 7.95 (s, 2H), 7.83 (dd, J = 3.4 Hz, J = 6.7 Hz, 2H), 0.35 (s, 18H); 13C NMR (100 MHz in CDCl3):

 = 143.6, 143.0, 134.4, 131.2, 130.3, 124.3, 104.2, 101.6, 0.1; HRMS (EI) m/z: [M]+ Calcd for C22H24N2Si2 = 372.1478; Found = 372.1488. 1,2,3,4-Tetrafluoro-6,9-bis((trimethylsilyl)ethynyl)phenazine (4b) The tetrafluoro-ortho-quinone was freshly prepared before use according to a previously published procedure.58 1 (1.10 g, 3.66 mmol) and 3b (2.00 g, 11.1 mmol) were reacted according to general procedure 1, using DCM as solvent. The reaction mixture was heated to reflux and stirred overnight at this temperature. Purification by silica gel chromatography (10:1 hexanes:DCM) yielded 4b as a yellow solid (292 mg, 0.657 mmol, 18%). mp = 207-210˚C; IR (cm-1): 2957, 2901, 2853, 2153, 1675, 1595, 1536, 1485, 1341, 1245, 1073, 833, 755, 686, 625, 464; 1H NMR (300 MHz, CDCl3):  = 8.03 (s, 2H), 0.38 (s, 18H); 13C NMR (75 MHz, CDCl3):  = 143.1, 135.7, 124.5, 106.3, 100.5, 1.4 (the carbons next to the fluorine atoms could not be identified); 19F NMR (300 MHz, CDCl3):  = -149.61 (dd, J = 16.2 Hz, J = 3.6 Hz, 2F), -150.34 (dd, J = 15.0 Hz, J = 3.0 Hz, 2F); HRMS (ESI) m/z: [M + H]+ Calcd for C22H21F4N2Si2 = 445.1174; Found = 445.1180. 1,2,3,4-Tetrachloro-6,9-bis-((trimethylsilyl)ethynyl)phenazine (4c) 1 (0.600 g, 2.00 mmol) and 3c (0.982 g, 3.99 mmol) were reacted according to general procedure 1, using EtOH as solvent. The reaction mixture was heated to 40˚C and stirred overnight at this temperature. Purification by silica gel chromatography (20:1 hexanes:DCM) yielded 4c as a yellow solid (819 mg, 1.60 mmol, 80%). mp = 201-203˚C; IR (KBr, cm-1): 2958, 2899, 2152,

ACS Paragon Plus Environment

Page 19 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Organic Chemistry

1573, 1551, 1488, 1454, 1371, 1245, 1132, 1050; 1H NMR (400 MHz, CDCl3):  = 8.02 (s, 2H), 0.36 (s, 18H); 13C NMR (100 MHz, CDCl3):  = 143.3, 138.7, 135.4, 135.1, 132.2, 124.3, 105.8, 100.2, -0.1; HRMS (EI) m/z: [M]+ Calcd for C22H20Cl4N2Si2 = 507.9919; Found = 507.9918. 1,2,3,4-Tetrabromo-6,9-bis-((trimethylsilyl)ethynyl)phenazine (4d) 1 (0.300 g, 0.998 mmol) and compound 3d (0.846 g, 2.00 mmol) were reacted according to general procedure 1. The reaction mixture was heated to 40˚C and stirred overnight at this temperature. Purification by silica gel chromatography (hexanes) yielded 4d as a yellow solid (303 mg, 0.440 mmol, 48%). mp = 137˚C (decomposition); IR (cm-1): 2958, 2925, 2899, 2852, 2153, 1893, 1573, 1446, 1359, 1254, 1247, 1099, 1044; 1H NMR (400 MHz, CDCl3):  = 8.04 (s, 2H), 0.38 (s, 18H);

13

C NMR (100 MHz, CDCl3):  = 149.0, 145.0, 140.5, 137.1, 133.9, 129.2,

110.8, 105.5, 5.1; HRMS (EI) m/z: [M]+ Calcd for C22H20Br4N2Si2 = 683.7899; Found = 683.7895. 1,4-Bis((triisopropylsilyl)ethynyl)phenazine (5a) The ortho-benzoquinone was freshly prepared by stirring a solution of catechol (0.692 g, 6.40 mmol) in CHCl3 (200 mL) into a solution of K2Cr2O7 (3.76 g, 12.8 mmol) in 1 M H2SO4 (100 mL). After stirring for 10 min. at room temperature, the organic fraction was collected, the solvent was removed under reduced pressure, and the benzoquinone was reacted with 2 (1.00 g, 2.13 mmol) according to general procedure 1, using EtOH as solvent. The reaction mixture was heated to reflux and stirred overnight. Purification by silica gel chromatography (3:1 hexanes:DCM) gave the product 5a as a yellow solid (0.480 g, 0.887 mmol, 42%). mp = 9698˚C; IR (cm-1): 3062, 2962, 2864, 2756, 2723, 2154, 1946, 1886, 1568, 1521, 1461, 1409, 1257, 1118; 1H NMR (300 MHz, CDCl3):  = 8.24 (dd, J = 3.4 Hz, J = 6.7 Hz, 2H), 7.94 (s, 2H), 7.84

ACS Paragon Plus Environment

The Journal of Organic Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

(dd, J = 3.4 Hz, J = 6.7 Hz, 2H), 1.26 (s, 42H);

13

Page 20 of 28

C NMR (75 MHz, CDCl3):  = 143.9, 143.8,

133.9, 131.2, 130.5, 124.8, 104.0, 101.0, 19.2, 11.9; HRMS (EI) m/z: [M]+ Calcd for C34H48N2Si2 = 540.3356; Found = 540.3354. 1,2,3,4-Tetrafluoro-6,9-bis((triisopropylsilyl)ethynyl)phenazine (5b) The tetrafluoro-ortho-quinone was freshly prepared before use, according to a previously published procedure.58 2 (0.500 g, 1.07 mmol) and 3b (0.576 g, 3.20 mmol) were reacted according to general procedure 1, using DCM as solvent. The reaction mixture was heated to reflux and stirred overnight. Purification by silica gel chromatography (10:1 hexanes:DCM) yielded 5b as a yellow solid (152 mg, 0.248 mmol, 23%). mp = 107-108˚C; IR (cm-1): 2939, 2891, 2864, 2159, 1675, 1595, 1536, 1480, 1341, 1260, 1076, 993, 881, 809, 678, 453; 1H NMR (300 MHz, CDCl3):  = 8.03 (s, 2H), 1.24 (s, 42H);

13

C NMR (75 MHz, CDCl3):  = 143.5,

135.5, 124.8, 102.8, 102.6, 19.0, 11.8 (the carbons next to the fluorine atoms could not be identified); 19F NMR (300 MHz, CDCl3):  = -148.80 (dd, J = 15.0 Hz, J = 3.0 Hz, 2F), -149.91 (dd, J = 16.2 Hz, J = 3.6 Hz, 2F); HRMS (ESI) m/z: [M + H]+ Calcd for C34H45F4N2Si2 = 613.3052; Found = 613.3067. 1,2,3,4-Tetrachloro-6,9-bis-((triisopropylsilyl)ethynyl)phenazine (5c) 2 (0.200 g, 0.427 mmol) and 3c (0.115 g, 0.469 mmol) were reacted according to general procedure 1, using EtOH as solvent. The reaction mixture was heated to reflux and stirred overnight. Purification by silica gel chromatography (20:1 hexanes:DCM) yielded 5c as a yellow solid (54.0 mg, 0.0796 mmol, 19%). mp = 100-102˚C; IR (cm-1): 2964, 2866, 2725, 2156, 1949, 1458, 1369, 1263, 1107, 1031; 1H NMR (400 MHz, CDCl3):  = 8.02 (s, 2H), 1.21 (s, 42H); 13C

ACS Paragon Plus Environment

Page 21 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Organic Chemistry

NMR (100 MHz, CDCl3):  = 143.3, 138.8, 135.9, 133.7, 132.2, 124.5, 102.4, 102.0, 18.8, 11.4; HRMS (EI) m/z: [M]+ Calcd for C34H44Cl4N2Si2 = 676.1797; Found = 676.1776. 1,2,3,4-Tetrabromo-6,9-bis-((triisopropylsilyl)ethynyl)phenazine (5d) 2 (0.200 g, 0.427 mmol) and 3d (0.271 g, 0.640 mmol) were reacted according to general procedure 1. The reaction mixture was heated to reflux and stirred overnight. Purification by silica gel chromatography (hexanes) yielded 5d as a yellow solid (65.0 mg, 0.0759 mmol, 18%). mp = 107˚C (decomposition); IR (cm-1): 2941, 2891, 2864, 2725, 2150, 1892, 1701, 1573, 1463, 1448, 1359, 1269, 1126; 1H NMR (400 MHz, CDCl3):  = 8.03 (s, 2H), 1.21 (s, 42H); 13C NMR (100 MHz, CDCl3):  = 143.7, 139.9, 136.1, 131.7, 128.7, 124.3, 102.5, 101.8, 18.8, 11.4; HRMS (EI) m/z: [M]+ Calcd for C34H44Br4N2Si2 = 851.9777; Found = 851.9739. 1,4-Diethynylphenazine (6a) 4a (0.186 g, 0.499 mmol) was dissolved in 1:1 THF:MeOH (20 mL), to which K2CO3 (0.190 g, 4.99 mmol) was added. The solution was stirred for 30 min at room temperature. The product mixture was then poured over H2O (50 mL) and extracted with DCM (2 x 50 mL). The resulting solution was dried over sodium sulfate, and the solvent was removed under reduced pressure. Purification by silica gel chromatography (10:1 hexanes:EtOAc) gave 6a as a yellow solid (0.105 g, 0.460 mmol, 92%). mp = 80˚C (decomposition); IR (cm-1): 3298, 3270, 3232, 3205, 2101, 1521, 1473, 1334, 1112, 1034; 1H NMR (400 MHz, CDCl3):  = 8.36 (dd, J = 10.2 Hz, J = 3.3 Hz, 2H), 8.01 (s, 2H), 7.87 (dd, J = 10.2 Hz, J = 3.3 Hz, 2H), 3.76 (s, 2H); 13C NMR (100 MHz, CDCl3):  = 144.0, 143.2, 134.9, 131.7, 130.4, 124.0, 86.1, 80.6; HRMS (EI) m/z: [M]+ Calcd for C16H8N2 = 228.0687; Found = 228.0690. 1,2,3,4-Tetrafluoro-6,9-diethynylphenazine (6b) ACS Paragon Plus Environment

The Journal of Organic Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 22 of 28

4b (59 mg, 0.13 mmol) was dissolved in THF (10 mL), to which K2CO3 (0.18 g, 1.3 mmol) was added. The solution was stirred for 2 hours at room temperature. The reaction did not go to completion, and no progress was seen after 2 hours, even after 24 hours. The product mixture was then poured over H2O (50 mL) and extracted with DCM (2 x 50 mL). The resulting solution was dried over sodium sulfate, and the solvent was removed under reduced pressure. Purification by silica gel chromatography (20:1 hexanes:EtOAc) gave 6b as a yellow solid (0.018 g, 0.060 mmol, 45%). mp = 51˚C (decomposition); IR (cm-1): 3263, 2955, 2923, 2356, 2036, 1615, 1489, 1261, 1069, 800; 1H NMR (300 MHz, CDCl3):  = 8.11 (s, 2H), 3.79 (s, 2H);

13

C NMR (75 MHz,

CDCl3):  = 137.4, 136.4, 124.2, 87.3, 79.4 (the carbons next to the fluorine atoms could not be identified); 19F NMR (400 MHz):  = -148.80 (dd, J = 16.2 Hz, J = 3.6 Hz, 2F), -149.91 (dd, J = 15 Hz, J = 3.0 Hz, 2F); HRMS (FAB) m/z: [M + H]+ Calcd for C16H5N2F4 = 301.0383; Found = 301.0419. 1,2,3,4-Tetrachloro-6,9-diethynylphenazine (6c) 4c (0.200 g, 0.392 mmol) was dissolved in 1:1 THF:MeOH (20 mL), to which K2CO3 (0.542 g, 3.92 mmol) was added. The solution was stirred for 30 min at room temperature. The product mixture was then poured over H2O (50 mL) and extracted with DCM (2 x 50 mL). The resulting solution was dried over sodium sulfate, and the solvent was removed under reduced pressure. Purification by silica gel chromatography (20:1 hexanes:EtOAc) gave 6c as a yellow solid (0.119 g, 0.325 mmol, 83%). mp = 40˚C (decomposition); IR (cm-1): 3269, 2958, 2954, 2924, 2109, 1727, 1549, 1454, 1368, 1287, 1247, 1051, 1039; 1H NMR (400 MHz, CDCl3):  = 8.09 (s, 2H), 3.77 (s, 2H);

13

C NMR (100 MHz, CDCl3):  = 143.1, 138.9, 136.1, 135.4, 132.1, 124.0, 86.8,

79.2; HRMS (EI) m/z: [M]+ Calcd for C16H4Cl4N2 = 363.9129; Found = 363.9133. 1-Azido-2-(2-(2-methoxyethoxy)ethoxy)ethane (7a) ACS Paragon Plus Environment

Page 23 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Organic Chemistry

2-(2-(2-Methoxyethoxy)ethoxy)ethyl 4-methylbenzenesulfonate59 (12.9 g, 40.5 mmol) and NaN3 (5.27g, 81.0 mmol) were stirred into 1:1 H2O:MeOH (100 mL). The reaction was heated to reflux, and stirred overnight (16 h). The reaction mixture was cooled, and extracted with DCM (2 x 70 mL). The organic fractions were collected, dried over magnesium sulfate, and the solvent was removed under reduced pressure. Purification by silica gel chromatography (1:1 hexanes:EtOAc) gave 7a as a pale yellow oil (6.76 g, 35.7 mmol, 88%). IR (cm-1): 2872, 2097, 1453, 1284, 1106, 934, 851; 1H NMR (400 MHz, CDCl3):  = 3.67 (m, 8 H), 3.55 (m, 2H), 3.38 (t, J = 5.1 Hz, 2H), 3.37 (s, 3H); 13C NMR (100 MHz, CDCl3):  = 72.0, 70.8, 70.8, 70.7, 70.1, 59.1, 50.8. 13-Azido-2,5,8,11,15,18,21,24-octaoxapentacosane (7b) 2,5,8,11,15,18,21,24-Octaoxapentacosan-13-yl 4-methylbenzenesulfonate59 (8.90 g, 16.5 mmol) and NaN3 (5.37, 82.6 mmol) were stirred into 4:1 H2O:EtOH (250 mL). The reaction was heated to reflux, and stirred for 2 d. The reaction mixture was cooled, and extracted with DCM (3 x 75 mL). The organic fractions were collected, dried over magnesium sulfate, and the solvent was removed under reduced pressure. Purification by silica gel chromatography (EtOAc) gave 7b as a pale yellow oil (6.2 g, 15 mmol, 92%). IR (cm-1): 2866, 2092, 1455, 1269, 1098, 849, 731; 1H NMR (300 MHz, CDCl3):  = 3.48-3.35 (m, 29H), 3.20 (s, 6H); 13C NMR (75 MHz, CDCl3):  = 71.67, 70.64, 70.38, 70.35, 70.28, 70.24, 60.3, 58.7; HRMS (ESI) m/z: [M + Na]+ Calcd for C17H35N3O8Na = 432.2316; Found = 432.2319. 1,4-Bis(1-(2-(2-(2-methoxyethoxy)ethoxy)ethyl)-1H-1,2,3-triazol-4-yl)phenazine (8a) 6a (0.300 g, 1.31 mmol) and 7a (0.746 g, 3.94 mmol) were dissolved in a 5:1 THF:H2O solution (20 mL) and deoxygenated via the freeze-pump-thaw method (3x). Under a flow of nitrogen,

ACS Paragon Plus Environment

The Journal of Organic Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 24 of 28

CuSO4 • 5H2O (0.820 g, 3.29 mmol) and sodium ascorbate (0.651 g, 3.29 mmol) were added, and the reaction was then sealed and stirred overnight at room temperature. The crude mixture was then filtered through celite with DCM, and the solvent was dried with sodium sulfate and removed in vacuo. The product 8a was purified via silica gel flash chromatography (DCM, followed by EtOAc), and isolated as an orange oil (487 mg, 0.803 mmol, 61%). IR (cm-1): 2942, 2921, 2871, 2783, 2772, 2739, 2739, 1751, 1653, 1647, 1558, 1447, 1430, 1352, 1332, 1229, 1108, 1098, 1064, 1030; 1H NMR (300 MHz, CDCl3):  = 9.20 (s, 2H), 8.96 (s, 2H), 8.32 (dd, J = 10.2 Hz, J = 3.3 Hz, 2H), 7.88 (dd, J = 10.2 Hz, J = 3.3 Hz, 2H), 4.74 (t, J = 5.4 Hz, 4H), 4.04 (t, J = 5.4 Hz, 4H), 3.68 (m, 8H), 3.57 (m, 9H), 3.25 (s, 6H); 13C NMR (100 MHz, CDCl3):  = 143.1, 142.0, 140.2, 130.5, 129.6, 128.6, 128.0, 126.4, 71.78, 70.77, 70.53, 70.50, 69.74, 58.9, 50.4; HRMS (EI) m/z: [M]+ Calcd for C30H38N8O6 = 606.2914; Found = 606.2903. 1,2,3,4-Tetrachloro-6,9-bis(1-(2-(2-(2-methoxyethoxy)ethoxy)ethyl)-1H-1,2,3-triazol-4yl)phenazine (8c) 6c (0.080 g, 0.22 mmol) and 7a (0.12 g, 0.66 mmol) were dissolved in a 5:1 THF:H2O solution (20 mL) and deoxygenated via the freeze-pump-thaw method (3x). Under a flow of nitrgoen, CuSO4 • 5H2O (0.14 g, 0.55 mmol) and sodium ascorbate (0.11 g, 0.55 mmol) were added, and the reaction was then sealed and stirred overnight at room temperature. The crude mixture was then filtered through celite with DCM, and the solvent was dried with sodium sulfate and removed in vacuo. The product 8c was purified via silica gel flash chromatography (DCM followed by EtOAc) and isolated as a red oil (75 mg, 0.10 mmol, 46%). IR (cm-1): 2904, 2883, 2869, 2854, 1734, 1653, 1558, 1457, 1374, 1252, 1108, 1099; 1H NMR (400 MHz, CDCl3):  = 9.15 (s, 2H), 8.98 (s, 2H), 4.70 (t, 4H), 4.00 (t, 4H), 3.64 (m, 8H), 3.49 (m, 8H), 3.21 (s, 6H); 13C NMR (100 MHz, CDCl3):  = 141.8, 138.9, 136.4, 134.3, 131.4, 129.5, 128.2, 126.3, 71.86,

ACS Paragon Plus Environment

Page 25 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Organic Chemistry

70.77, 70.56, 69.58, 59.0, 50.5; HRMS (EI) m/z: [M]+ Calcd for C30H34Cl4N8O6 = 742.1355; Found = 742.1333. 1,4-Bis(1-(2,5,8,11,15,18,21,24-octaoxapentacosan-13-yl)-1H-1,2,3-triazol-4-yl)phenazine (9a) 6a (48 mg, 0.21 mmol) and 7b (190 mg, 0.46 mmol) were stirred together in H2O (1 mL) and THF (5 mL). The solution was then deoxygenated via the freeze-pump-thaw method (3x). Under a flow of nitrogen, Cu(PPh3)3Br (0.020 g, 0.021 mmol) was added. The reaction was then sealed under the inert atmosphere and stirred at 50˚C for 2 d. The reaction mixture was then extracted with saturated aqueous NH4Cl (25 mL) and DCM (5 x 25 mL), the organic fractions were collected and dried over sodium sulfate, and the solvent was removed under reduced pressure. Purification by silica gel chromatography (gradient elution, EtOAc → 20:1 EtOAc:MeOH → 10:1 EtOAc:MeOH) gave 9a as an orange oil (66 mg, 0.063 mmol, 30%). IR (cm-1): 2870, 1717, 1584, 1435, 1218, 1095, 851, 767; 1H NMR (300 MHz, CDCl3):  = 9.27 (s, 2H), 9.00 (s, 2H), 8.32 (dd, J = 10.2 Hz, J = 3.3 Hz, 2H), 7.89 (dd, J = 10.2 Hz, J = 3.3 Hz, 2H), 5.09 (p, J = 6.0 Hz, 2H), 4.09 (d, J = 6.3 Hz, 8H), 3.70-3.40 (m, 48H), 3.30 (s, 12H);

13

C NMR (75 MHz,

CDCl3):  = 143.2, 142.5, 140.8, 130.9, 130.1, 129.1, 128.6, 126.1, 72.15, 71.31, 70.88, 70.85, 70.76, 70.75, 70.63, 61.3, 59.3; HRMS (ESI) m/z: [M + H]+ Calcd for C50H79N8O16 = 1047.5609; Found = 1047.5618. 6,9-Bis(1-(2,5,8,11,15,18,21,24-octaoxapentacosan-13-yl)-1H-1,2,3-triazol-4-yl)-1,2,3,4tetrafluorophenazine (9b) 6b (18 mg, 0.060 mmol) and 7b (61 mg, 0.15 mmol) were stirred together in H2O (1 mL) and THF (5 mL). The solution was then deoxygenated via the freeze-pump-thaw method (3x). Under a flow of nitrogen, Cu(PPh3)3Br (0.011 g, 0.012 mmol) was added. The reaction was then sealed

ACS Paragon Plus Environment

The Journal of Organic Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 26 of 28

under the inert atmosphere and stirred at 50˚C for 2 d. The reaction mixture was then extracted with saturated aqueous NH4Cl (25 mL) and DCM (5 x 25 mL), the organic fractions were collected and dried over sodium sulfate, and the solvent was removed under reduced pressure. Purification by silica gel chromatography (gradient elution, EtOAc → 20:1 EtOAc:MeOH → 10:1 EtOAc:MeOH) gave 9b as a red oil (18 mg, 0.016 mmol, 27%). IR (cm-1): 2923, 2856, 1737, 1456, 1260, 1092, 198, 464; 1H NMR (300 MHz, CDCl3):  = 9.24 (s, 2H), 9.15 (s, 2H), 5.11 (p, J = 6.0 Hz, 2H), 4.09 (d, J = 6.3 Hz, 8H), 3.70-3.55 (m, 41H), 3.48 (m, 8H), 3.33 (s, 12H);

13

C NMR (75 MHz, CDCl3):  = 142.4, 140.4, 130.3, 129.3, 126.0, 72.22, 71.36, 70.93,

70.91, 70.81, 70.59, 61.4, 59.3 (the carbons next to the fluorine atoms could not be identified); 19

F NMR (400 MHz, CDCl3):  = -150.88 (dd, J = 16.2 Hz, J = 3.6 Hz, 2F), -152.06 (dd, J = 15.0

Hz, J = 3.0 Hz, 2F); HRMS (ESI) m/z: [M + H]+ Calcd for C50H75F4N8O16 = 1119.5232; Found = 1119.5230. Supporting Information. Copies of NMR spectra. This material is available free of charge via the Internet at http://pubs.acs.org. References (1)

Rabaey, K.; Boon, N.; Höfte, M.; Verstraete, W. Environ. Sci. Technol. 2005, 39, 3401.

(2)

Jana, A. K. J. Photochem. Photobiol., A 2000, 132, 1.

(3)

Fu, C. Y.; Li, M. T.; Su, Z. M.; Hong, Z.; Li, W. L.; Li, B. Appl. Phys. Lett. 2006, 88.

(4)

Chen, J. P.; Li, X.-C. C.; Canon Kabushiki Kaisha, Japan . 2004, p 14 pp.

(5)

Klubek, K. P.; Vargas, J. R.; Liao, L.-s.; Eastman Kodak Company, USA . 2005, p 43 pp.

(6) 417.

Mavrodi, D. V.; Blankenfeldt, W.; Thomashow, L. S. In Annu. Rev. Phytopathol. 2006; Vol. 44, p

(7)

Laursen, J. B.; Nielsen, J. Chem. Rev. 2004, 104, 1663.

(8) Mentel, M.; Ahuja, E. G.; Mavrodi, D. V.; Breinbauer, R.; Thomashow, L. S.; Blankenfeldt, W. ChemBioChem 2009, 10, 2295. (9) Beifuss, U.; Tietze, M. In Natural Products Synthesis II: Targets, Methods, Concepts; Mulzer, J., Ed. 2005; Vol. 244, p 77. (10)

Hollstein, U.; Van Gemert, R. J. J. Biochemistry 1971, 10, 497.

(11)

Pauliukaite, R.; Ghica, M. E.; Barsan, M. M.; Brett, C. M. A. Anal. Lett. 2010, 43, 1588.

(12)

Han, S. B.; Zhu, M.; Yuan, Z. B.; Li, X. Biosens. Bioelectron. 2001, 16, 9. ACS Paragon Plus Environment

Page 27 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

The Journal of Organic Chemistry

(13)

Hashemi, P.; Zarjani, R. A. Sens. Actuators, B 2008, 135, 112.

(14)

Steel, P. J.; Fitchett, C. M. Coord. Chem. Rev. 2008, 252, 990.

(15) 661.

Miao, S. B.; Bangcuyo, C. G.; Smith, M. D.; Bunz, U. H. F. Angew. Chem., Int. Ed. 2006, 45,

(16)

Huisgen, R.; Szeimies, G.; Möbius, L. Chemische Berichte 1967, 100, 2494.

(17)

Huisgen, R.; Knorr, R.; Möbius, L.; Szeimies, G. Chemische Berichte 1965, 98, 4014.

(18)

Tornoe, C. W.; Christensen, C.; Meldal, M. J. Org. Chem. 2002, 67, 3057.

(19) 2596.

Rostovtsev, V. V.; Green, L. G.; Fokin, V. V.; Sharpless, K. B. Angew. Chem., Int. Ed. 2002, 41,

(20)

Theme Issue (4) "Applications of Click Chemistry" Chem. Soc. Rev. 2010, 39, 1221.

(21)

Kolb, H. C.; Finn, M. G.; Sharpless, K. B. Angew. Chem., Int. Ed. 2001, 40, 2004.

(22)

Meldal, M.; Tornøe, C. W. Chem. Rev. 2008, 108, 2952.

(23)

Bräse, S.; Gil, C.; Knepper, K.; Zimmermann, V. Angew. Chem., Int. Ed. 2005, 44, 5188.

(24) Wang, Q.; Chan, T. R.; Hilgraf, R.; Fokin, V. V.; Sharpless, K. B.; Finn, M. G. J. Am. Chem. Soc. 2003, 125, 3192. (25)

Phillips, R. L.; Kim, I.-B.; Tolbert, L. M.; Bunz, U. H. F. J. Am. Chem. Soc. 2008, 130, 6952.

(26) Bakbak, S.; Leech, P. J.; Carson, B. E.; Saxena, S.; King, W. P.; Bunz, U. H. F. Macromolecules 2006, 39, 6793. (27)

Englert, B. C.; Bakbak, S.; Bunz, U. H. F. Macromolecules 2005, 38, 5868.

(28)

Opsteen, J. A.; van Hest, J. C. M. Chem. Comm. 2005.

(29)

Qin, A.; Lam, J. W. Y.; Tang, B. Z. Macromolecules 2010, 43, 8693.

(30) Wu, P.; Feldman, A. K.; Nugent, A. K.; Hawker, C. J.; Scheel, A.; Voit, B.; Pyun, J.; Frechet, J. M. J.; Sharpless, K. B.; Fokin, V. V. Angew. Chem., Int. Ed. 2004, 43, 3928. (31) Malkoch, M.; Thibault, R. J.; Drockenmuller, E.; Messerschmidt, M.; Voit, B.; Russell, T. P.; Hawker, C. J. J. Am. Chem. Soc. 2005, 127, 14942. (32)

Inglis, A. J.; Pierrat, P.; Muller, T.; Brase, S.; Barner-Kowollik, C. Soft Matter 2010, 6, 82.

(33)

Zhou, Z.; Fahrni, C. J. J. Am. Chem. Soc. 2004, 126, 8862.

(34)

Juricek, M.; Kouwer, P. H. J.; Rowan, A. E. Chem. Comm. 2011, 47, 8740.

(35)

Chan, T. R.; Hilgraf, R.; Sharpless, K. B.; Fokin, V. V. Org. Lett. 2004, 6, 2853.

(36)

Schweinfurth, D.; Hardcastle, K. I.; Bunz, U. H. F. Chem. Comm. 2008, 2203.

(37)

Zink, D. M.; Baumann, T.; Nieger, M.; Bräse, S. Eur. J. Org. Chem. 2011, 2011, 1432.

(38)

Brombosz, S. M.; Appleton, A. L.; Zappas, A. J.; Bunz, U. H. F. Chem. Comm. 2010, 46, 1419.

(39)

Khan, A.; Muller, S.; Hecht, S. Chem. Comm. 2005, 584.

(40)

Ceresa, A.; Radu, A.; Peper, S.; Bakker, E.; Pretsch, E. Anal. Chem. 2002, 74, 4027.

(41)

Ye, J.-H.; Duan, L.; Yan, C.; Zhang, W.; He, W. Tetrahedron Lett. 2012, 53, 593.

(42)

Qin, C.; Wong, W.-Y.; Wang, L. Macromolecules 2010, 44, 483.

(43)

Kumar, M.; Kumar, N.; Bhalla, V. Org. Biomol. Chem. 2012, 10, 1769.

ACS Paragon Plus Environment

The Journal of Organic Chemistry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

(44)

Huang, S.; He, S.; Lu, Y.; Wei, F.; Zeng, X.; Zhao, L. Chem. Comm. 2011, 47, 2408.

(45)

Wang, H.-H.; Xue, L.; Qian, Y.-Y.; Jiang, H. Org. Lett. 2009, 12, 292.

(46)

Hein, J. E.; Fokin, V. V. Chem. Soc. Rev. 2010, 39, 1302.

(47) Appleton, A. L.; Brombosz, S. M.; Barlow, S.; Sears, J. S.; Bredas, J.-L.; Marder, S. R.; Bunz, U. H. F. Nat. Commun. 2010, 1, 91. (48)

Milian Medina, B.; Beljonne, D.; Egelhaaf, H.-J.; Gierschner, J. J. Chem. Phys. 2007, 126.

(49)

Tolstorozhev, G.; Tikhomirov, S. J. Appl. Spectrosc. 1998, 65, 659.

(50)

Hirata, Y.; Tanaka, I. Chem. Phys. Lett. 1976, 43, 568.

(51)

Tan, S. S.; Teo, Y. N.; Kool, E. T. Org. Lett. 2010, 12, 4820.

(52) Phillips, R. L.; Miranda, O. R.; Mortenson, D. E.; Subramani, C.; Rotello, V. M.; Bunz, U. H. F. Soft Matter 2009, 5, 607. (53)

Liu, Y.; Yu, H.-M.; Chen, Y.; Zhao, Y.-L. Chem--Eur. J. 2006, 12, 3858.

(54)

Liu, Y.; Chen, Y.; Li; Zhang, H.-Y.; Liu, S.-X.; Guan, X.-D. J. Org. Chem. 2001, 66, 8518.

(55) Coombs, B. A.; Lindner, B. D.; Edkins, R. M.; Rominger, F.; Beeby, A.; Bunz, U. H. F. New J. Chem. 2012, 36. (56)

Bangcuyo, C. G.; Evans, U.; Myrick, M. L.; Bunz, U. H. F. Macromolecules 2001, 34, 7592.

(57) Appleton, A. L.; Miao, S.; Brombosz, S. M.; Berger, N. J.; Barlow, S.; Marder, S. R.; Lawrence, B. M.; Hardcastle, K. I.; Bunz, U. H. F. Org. Lett. 2009, 11, 5222. (58)

Lemal, D. M.; Ramanathan, S.; Shellito, J. J. Org. Chem. 2008, 73, 3392.

(59)

Kim, I.-B.; Phillips, R.; Bunz, U. H. F. Macromolecules 2007, 40, 5290.

ACS Paragon Plus Environment

Page 28 of 28