Bimetallic Carbide as a Stable Hydrogen Evolution ... - ACS Publications

Nov 28, 2017 - ... School of Materials Science and Engineering, East China University of Science and Technology ... Centre for Clean Environment and E...
3 downloads 0 Views 2MB Size
Subscriber access provided by University of Sussex Library

Letter

Bimetallic Carbide as A Stable Hydrogen Evolution Catalyst in Harsh Acidic Water Meng Yang Zu, Peng Fei Liu, Chongwu Wang, Yun Wang, Li Rong Zheng, Bo Zhang, Huijun Zhao, and Hua Gui Yang ACS Energy Lett., Just Accepted Manuscript • DOI: 10.1021/acsenergylett.7b00990 • Publication Date (Web): 28 Nov 2017 Downloaded from http://pubs.acs.org on November 28, 2017

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

ACS Energy Letters is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 25

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Energy Letters

Bimetallic Carbide as A Stable Hydrogen Evolution Catalyst in Harsh Acidic Water Meng Yang Zu,† Peng Fei Liu,† Chongwu Wang,† Yun Wang ‡ Li Rong Zheng, # Bo Zhang,§ Huijun Zhao,‡ Hua Gui Yang†,* †

Key Laboratory for Ultrafine Materials of Ministry of Education, School of Materials

Science and Engineering, East China University of Science and Technology, Shanghai 200237, China. ‡

Centre for Clean Environment and Energy, Gold Coast Campus, Griffith University,

Queensland 4222, Australia. §

State Key Laboratory of Molecular Engineering of Polymers, Department of

Macromolecular Science, Fudan University, Shanghai 200438, China. #

Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049,

China.

ABSTRACT: Cheap, efficient and stable hydrogen evolution reaction (HER) electrocatalysts have long been pursued, owing to their scientific and technological importance. Currently, platinum has been regarded as the benchmarked HER electrocatalyst. Unfortunately, the low abundance and high cost impede its industrial applications. Here, we synthesize bimetallic carbide Mo6Ni6C grown on nickel foam as HER catalyst, delivering low overpotential of -51 mV at -10 mA cm-2 in 0.5 M 1

ACS Paragon Plus Environment

ACS Energy Letters

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 25

H2SO4 for more than 200 hours, which is among the best reported benchmarked HER catalysts in acid to date. On the basis of experimental observations and theoretical modelling, we ascribe the good activity to the proper Gibbs free energy of adsorbed hydrogen (∆G(H*)) for the carbon active sites, and attribute the stability to the corrosion-stable Mo-Mo bonds in the crystal structure. This work demonstrates the possibility for Mo6Ni6C to be one of the best candidates for HER electrocatalysts in large-scale electrolysis industry.

Table of Contents graphic.

Hydrogen production via electrolysis is an vital process in several developing clean-energy technologies.1-3 While currently, the efficiency of hydrogen evolution reaction (HER) is too low to be economically competitive, considering that 4.5-5.0 kWh/m3 H2 energy in average is needed for conventional industrial electrolyzers, which restricts its applications among all the hydrogen production industries (just 4 % of about 500 bill. Nm³/year) in total around the world.4 Therefore, to further increase the efficiency and lower the cost of this process, active and stable hydrogen evolution 2

ACS Paragon Plus Environment

Page 3 of 25

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Energy Letters

electrocatalysts are urgently needed, especially for the industrial operation in harsh acidic and alkaline media. Although platinum (Pt) has been regarded as the optimum HER electrocatalyst, the low abundance and corresponding high cost further restrict its large-scale utilization.5-7 Hence, it still remains as a great challenge to develop low-cost and high-activity HER electrocatalyst in harsh electrolytes for long-time durable hydrogen production. Very recently, Zhang et al.8, Chen et al.9 and Csernica et al.10 prepared MoNi4/MoO2, MoNi4/MoO3-x and Mo7Ni7 as highly active catalysts with sustained H2 production in 1.0 M KOH, and they are demonstrated as record alkaline HER electrocatalysts to date. However, these NiMo alloys can easily get deactivation under the working conditions because of rapid corrosion and gradual oxidation, especially in the acidic media, in which they could not even survive for a pretty short time.5,11 In response, we aim to improve the performance of these alloy-based HER catalysts in acid by employing a subtle modification strategy. Previous work suggests that bimetallic compounds, such as bimetallic sulfides,12-14 carbides,15-17 nitrides18,19 and phosphides20,21 usually possess better durability than alloys, among which carbides and nitrides have emerged as the best candidates, because the interstitial carbon and nitrogen atoms could modify the nature of d orbital in the parent metal, thus increasing the s-p electrons count and giving rise to the catalytic properties similar to the noble metal Pt.22-26 For example, Green et. al.27 found that in the field of pyridine hydrodenitrogenation catalysis, CoMo-based compounds show an activity decreasing 3

ACS Paragon Plus Environment

ACS Energy Letters

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 4 of 25

in order of CoMoCx ∼CoMoNx ∼CoMoOx > CoMoSx, and the stability order of the first three catalysts is CoMoCx > CoMoNx > CoMoOx. Considering the mechanism similarities between the HER and HDN (both adsorption and desorption process of proton), we anticipate that bimetallic carbide is quite possible to possess better stability compared to NiMo alloys, especially in acidic water.

Herein, for the first time, we rationally designed a bimetallic carbide Mo6Ni6C uniformly grown on Ni foam (Mo6Ni6C/NF) as an active and ultrastable electrocatalyst for sustainable HER in harsh acidic media. The density functional theory (DFT) calculations elucidate that the Mo6Ni6C catalyst is intrinsically metallic and possesses a moderate Gibbs free energy of adsorbed hydrogen (∆G(H*)) around 0 eV like Pt, which renders Mo6Ni6C highly active towards HER process. X-ray absorption fine structure (XAFS) analysis of Mo6Ni6C confirms the existence of acid-stable Mo-Mo bonds,28,29 which potentially stabilize its architecture, leading to a better stability. Consequently, Mo6Ni6C/NF exhibits excellent HER performance for achieving low overpotential (η) of -51 mV at current density (j) of -10 mA cm-2 for at least 200 hours in 0.5 M H2SO4, surpassing other available HER catalysts to date. Simultaneously, it maintains equivalently distinguished performance in 1.0 M KOH for delivering the j of -10 mA cm-2 for at least 300 hours at the η of -34 mV. These findings suggest that bimetallic carbides could serve as a promising group of HER electrocatalysts in harsh acidic environment, and its extraordinarily high activity and stability open up avenues to replace platinum in technologies relevant to renewable 4

ACS Paragon Plus Environment

Page 5 of 25

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Energy Letters

energies, such as the large-scale application of alkaline water electrolysis (AWE) and proton exchange membrane (PEM) electrolyzer.

The schematic representations of Mo6Ni6C, NiMo and Mo2C are shown in Figure 1, Figure S1 and S2. It is mentionable that Mo-Mo bonds exist in Mo6Ni6C, resembling acid-stable Mo2C,30 while no Mo-Mo bonds exists in NiMo alloy. To characterize the crystal structure of Mo6Ni6C, powder X-ray diffraction (XRD) was conducted. As shown in Figure 2a and Figure S3, the synthesized sample was well matched with the reference XRD pattern of cubic Mo6Ni6C (JCPDS No. 65-4436). Notably, the apparent diffraction peak centered at 40.5o is ascribed to (422) plane of Mo6Ni6C. XRD patterns of the samples synthesized via different temperatures and Ni:Mo ratios are also shown in Figure S4.

Figure S5a,b show the photographs of Mo6Ni6C/NF before and after being stretched, indicating the material can be flexed well without undergoing structural damage. When the Ni foam substrate was enlarged to 3 cm × 4 cm (Figure S5c), the surface of the Ni foam was still well-proportioned as previous samples. Scanning electron microscope (SEM) images and corresponding elemental mappings reveal that the synthesized materials uniformly cover the surfaces of Ni foam (Figure 2b, Figure S6 and S7). Furthermore, high-resolution SEM images clearly show that Mo6Ni6C/NF consists of some clusters of rods with a mean diameter of around 1 µm, which are built up by a set of nanoparticles of 50 nm in average (Figure 2c, Figure S8 and S9). Similarly, the covered Mo6Ni6C materials are also made up by the nanoparticles in the 5

ACS Paragon Plus Environment

ACS Energy Letters

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 6 of 25

same size (Figure 2d). The transmission electron microscope (TEM) images of Mo6Ni6C are shown in Figure 2e and Figure S10, which are consistent with the SEM image of rods and clusters composed of nanoparticles with average size of 50 nm. TEM and high-resolution TEM (HRTEM) images (Figure 2f and 2g) further confirm that a series of lattice fringes give interplanar distances of 0.222 nm, corresponding to the (422) crystallographic planes of Mo6Ni6C phase, which agrees well with XRD results. The corresponding selected area electron diffraction (SAED) pattern of Mo6Ni6C confirms that it owns high crystallinity (inset of Figure 2g). Furthermore, to optimize the performance of Mo6Ni6C, we adjusted the synthesis temperatures and initial ratios of precursors, and the corresponding SEM images are listed in Figures S11 and S12. We found the temperature influences the particle size of Mo6Ni6C and the Ni:Mo ratio affects the density of clusters of rods.

The X-ray photoelectron spectroscopy (XPS) spectra of Mo 3d and Ni 2p3/2 for Mo6Ni6C/NF are shown in Figure 3a and 3b. Mo 3d spectra are split into 3d5/2 and 3d3/2 peaks because of the spin-orbital coupling feature, and the peaks located at binding energy of 227.8 and 231.1 eV are assigned to metallic Mo (3d5/2 and 3d3/2, respectively), the other peaks are attributed to surface oxidized phases.31,32 Similarly, it can be observed that the strong peaks at 852.4 eV with its satellite at 857.2 eV belong to metallic Ni, and the other peaks are assigned to Nix+.33,34 The low valence states of Mo and Ni certify the metallic nature of Mo6Ni6C, which is beneficial to produce high catalytic activities of HER process.35,36 Further comparison analyses 6

ACS Paragon Plus Environment

Page 7 of 25

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Energy Letters

have also been taken among the samples with different synthesis temperature (Figure S13). It is worth mentioning that the C 1s and Ni 2p spectra of all the samples are similar,33,34,37,38 but the characteristic peaks for Mo 3d spectrum of the sample synthesized via 500 oC (Mo6Ni6C/NF/500) are quite different from others, and the biggest difference is that Mo0 signals at around 227.8 and 231.1 eV are missing. Further we conducted the galvanostatic measurement for Mo6Ni6C/NF/500 in 0.5 M H2SO4, discovering its poor stability compared to Mo6Ni6C/NF (Figure S14). Considering that the materials also uniformly cover the surfaces of Ni foam for Mo6Ni6C/NF/500 (Figure S11), we conclude that Mo-Mo bonds get a contribution in catalysts’ durability, which is consistent with XAFS analysis and previous studies.27

To further probe the bulk fine structures of the catalysts, XAFS characterizations were carried out. In Figure 3c, only NiMo alloy sample exhibits obvious oxidation peak at around 20005.2 eV, which is probably caused by the easy oxidation in air. While for the Ni K-edge XANES spectra, the Mo6Ni6C exhibits the similar valence like NiMo alloy, confirming the metallic feature of the catalyst (Figure 3d). As shown in Figure 3e, the Fourier-transforms (FT) of the XAFS spectra collected at the Mo K-edge region reveal that considerable Mo-Mo bonds exist in Mo6Ni6C and Mo2C. For comparison, no apparent signals centered at around 2.4 and 2.7 Å was detected in NiMo alloy. In addition, the peak at around 1.5 Å is associated with Mo-C bonds,35 consistent with the Mo-C bonding in the crystal structure of Mo6Ni6C. The FT of the XAFS spectra for Ni K-edge demonstrated the existence of Ni-Ni bonds in Mo6Ni6C 7

ACS Paragon Plus Environment

ACS Energy Letters

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 8 of 25

sample, further illustrating its metallic property (Figure 3f). The corresponding FTs of k3-weighted EXAFS oscillations are shown in Figure S15. Overall, XAFS unambiguously proved the metallic feature of the Mo6Ni6C, with Mo-Mo and Ni-Ni bonds in the structure.

To evaluate the HER performances of Mo6Ni6C/NF, we investigate the linear sweep voltammetry (LSV) curves of all the samples in a typical three-electrode system with 0.5 M H2SO4 and 1.0 M KOH as the electrolyte, respectively. Firstly, in the harsh acidic environment, Mo6Ni6C/NF possesses high activity (Figure 4a) for showing an excellent HER catalytic activity with j of -10, -20 and -100 mA cm-2 at η of -51, -61 and -93 mV (-10 mA cm-2 at -44 mV for Pt/C/NF, -217 mV for NiMo/NF, -288 mV for Mo2C/NF and -382 mV for blank NF), standing at the forefront of the HER field. Moreover, to weaken the influence of the electrical contact between the particles and Ni foam, we reloaded the Mo6Ni6C powder, which was scraped off from the Ni foam substrate, onto Ni foam substrate (denoted as Mo6Ni6C powder/NF) to test LSV (Figure S16). It could be observed that Mo6Ni6C powder/NF still performs better activity than Mo2C and MoNi4 loaded on Ni foam in the similar dip-coating way with the same loading. Additionally, the LSV plots of the samples synthesized via different temperatures and Ni:Mo ratios are shown in Figures S17 and S18. Correspondingly, the Nyquist spectra reveal that Mo6Ni6C/NF has fast charge transport process (Figure 4b), and the equivalent circuit used for fitting the Nyquist plots is shown in the inset of Figure 4b. The Tafel slope of Mo6Ni6C/NF is 35.70 mV 8

ACS Paragon Plus Environment

Page 9 of 25

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Energy Letters

dec-1, which is much lower than the other control samples except for Pt/C/NF (Figure 4c). The effective active surface area (ECSA) of Mo6Ni6C/NF was estimated from the double layer capacitance (Cdl), as Cdl is linearly proportional to the ECSA. The Cdl of Mo6Ni6C/NF is about 0.77 F cm-2 in 0.5 M H2SO4 (Figure 4d and S19), larger than that of NiMo/NF, Pt/C/NF and Mo2C/NF, guaranteeing a large ECSA which also synergistically contributes to the excellent HER activity. However, when normalized by ECSA, we found that the j of Mo6Ni6C/NF was still larger than that of compared samples (NiMo/NF and Mo2C/NF), further revealing that Mo6Ni6C was intrinsically more active (Figure S20). Noteworthy, to evaluate the stability of Mo6Ni6C/NF, galvanostatic measurements was conducted in 0.5 M H2SO4 (Figure 5). A continuous HER process occurred to generate molecular hydrogen at j of -10 mA cm-2. The Mo6Ni6C/NF electrode could maintain the j of -10 mA cm-2 at around -77 mV without apparent deactivation in the acidic media for at least 200 hours, and the j of -40 mA cm-2 at around -100 mV for 20 hours (Figure S21). To avoid the background current interfering the evaluation of HER performance, multi-step current test was conducted (Figure S22). The current density started at -10 mA cm-2 to -100 mA cm-2 with an increment of -10 mA cm-2 every 600 s. In low current density range (below -100 mA cm-2), the j and corresponding η matched well with those tested in the polarization curves, suggesting that low capacitance current existed in the HER potential range. In addition, the Faradaic efficiency (FE) for hydrogen evolution of this catalyst was evaluated, which was determined to be nearly 100% during the 10 hours of

9

ACS Paragon Plus Environment

ACS Energy Letters

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 10 of 25

electrolysis (inset of Figure 5). The corresponding video for the HER process under different overpotentials in acidic water is shown in Movie S1 (Supporting Information). For comparison, Movie S2 (Supporting Information) indicates that Mo6Ni6C/NF keeps more rapid HER rate than Pt/C/NF under same overpotentials, which obviously illustrates the better HER activity of Mo6Ni6C than Pt/C. To the best of our knowledge, such activity combined with ultrastable durability for the materials in the acidic conditions, which are directly grown on Ni foams without any protective layers (graphene or amorphous carbon), has never been reported before. As stated by Markovic et al,6 the HER activities of most catalysts in alkaline water are customarily around two or three orders of magnitude lower than those in acidic solutions, because they are generally inefficient in the prior step of water dissociation. Fortunately, Mo6Ni6C/NF could overcome this obstacle and even possess a better activity in the alkaline environment. Mo6Ni6C/NF shows j of -10, -20 and -100 mA cm-2 at η of -34, -48 and -112 mV (Figure S23a), respectively. Correspondingly, the Nyquist spectra reveal that Mo6Ni6C/NF also has the fastest charge transport process among all the controlled catalysts (Figure S23b) in 1.0 M KOH, and displays a Tafel slope of 36.34 mV dec-1 (as shown in Figure S23c). The Cdl of Mo6Ni6C/NF is 1.18 F in 1.0 M KOH (Figure S23d). Galvanostatic measurements taken in the alkaline media (Figures S24 and S25) could last for more than 300 hours at j of -10 mA cm-2, and 20 hours at j of -40 mA cm-2, and the FE for hydrogen evolution was also determined to be nearly 100% during the 10 hours of 10

ACS Paragon Plus Environment

Page 11 of 25

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Energy Letters

electrolysis (inset of Figure S24). Moreover, multi-step current test was also conducted (Figure S26). The j and corresponding η also matched well with those tested in the polarization curves below -100 mA cm-2, indicating that low capacitance current existed in the HER potential range. The corresponding video for the HER process under different overpotentials in 1.0 M KOH is shown in Movie S3 (Supporting Information). In general, such activity and stability of Mo6Ni6C locate in the top positions of the recently reported HER electrocatalysts, as compared in the Table S1 (Supporting Information).

To further confirm the structure stability of the bimetallic Mo6Ni6C after long-time HER process, a series of characterizations were carried out. After the stability test, the XRD patterns of Mo6Ni6C/NF are shown in Figure S27, from which we could know that the intense of those peaks for the Mo6Ni6C phase became slightly weaker after 200 hours’ operation in 0.5 M H2SO4. Nonetheless, the crystal structure still maintains as Mo6Ni6C. For sample measured in 1.0 M KOH, the XRD pattern is almost the same as the pristine one. Furthermore, after exposure to air for more than 120 days, the XRD pattern of Mo6Ni6C/NF was also tested, and negligible difference was observed, as shown in Figure S28. Unlike NiMo alloy and Mo2C, which are easy to get surface oxidation exposed to air,11,40 Mo6Ni6C also displays extraordinary stability in the air.

The morphologies of the catalyst before and after chronopotentiometric tests in 0.5 M H2SO4 and in 1.0 M KOH were also characterized. After the stability test in 0.5 11

ACS Paragon Plus Environment

ACS Energy Letters

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 12 of 25

M H2SO4, the rods seemed like somewhat melting on the surface (Figure S29), which may be caused by the harsh environment of acidic electrolyte. However, we could clearly see that the material still constituted with the nanoparticles in nature, which covered the Ni foam uniformly, protecting the substrate form being corroded by the strong acid. The morphologies of Mo6Ni6C/NF after 300 hours’ durability test in 1.0 M KOH became a little different from the pristine, identifying that there is lamellar substance formed on the surface (Figure S30). Overall, the XRD characterizations clearly demonstrate that this bimetallic carbide Mo6Ni6C could sustain strong acidic and alkaline solution to continuous HER process, which would not be influenced by the morphologies. As the supporting evidence, the digital photos of Mo6Ni6C/NF and controlled samples immersed in 0.5 M H2SO4 before and after 30 days are also shown in Figure S31. For comparison, we could observe that only Mo6Ni6C/NF did not change significantly, but others seemed dissolving into the acidic solution to different extents.

DFT calculations were carried out to further pinpoint the origin of the excellent performance of Mo6Ni6C. Firstly, the calculated density of states (DOS) images for Mo6Ni6C (Figure S32) confirm the metallic feature of Mo6Ni6C. For comparison, the total density of states (TDOS) and partial density of states (PDOS) of other controlled samples were also calculated. It can be found that the peaks of occupied states of Mo6Ni6C are higher at the lower energy range ([-8.0 eV, -4.0 eV]) in terms of those of Ni3C, and Mo2C (Figures S33 and S34). It indicates that that Mo6Ni6C owns better 12

ACS Paragon Plus Environment

Page 13 of 25

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Energy Letters

stability, which is in agreement with the experimental observation. To further evaluate the electrocatalytic performance of Mo6Ni6C, we systematically examined the ∆G(H*) on the Mo6Ni6C (422) surface by virtue of extensive first-principles DFT calculations (Figure S35). Since all Ni, Mo, and C atoms are in the topmost layer of the (422) surface, the adsorption of H on these three different sites is considered. It is found that carbon atoms on Mo6Ni6C (422) (denoted as C @ Mo6Ni6C) possess the most optimum ∆G(H*), indicating that they may be the active sites for HER. Compared to some other materials,41,42 C @ Mo6Ni6C also outperforms them since its value of ∆G(H*) is more close to 0 (approximately 0.05 eV). The calculations about activity and stability were further verified by the experimental investigations as shown above.

To test the viability of Mo6Ni6C/NF for large-scale water electrolysis, we constructed the high-surface-area Mo6Ni6C/NF as cathode and incorporated it into an alkaline electrolyzer. The anode was made by a two-step hydrothermal method of nickel iron diselenide on Ni foam (NixFe1-xSe2/NF).43 The anode was first tested separately in a three-electrode set-up to assess its individual performance for the relevant reactions, which exhibited high activity in 1.0 M KOH electrolyte, requiring 210 mV overpotential to drive oxygen production at 10 mA cm−2, as shown in Figure S36. The electrodes were then loaded into a home-made single cell, and the resultant electrolyzer exhibited excellent performance, delivering 10 mA cm−2 at approximately 1.51 V consistently over a 25 hours’ period at room temperature, and at around 1.44 V at the temperature of 60 oC (Figure S37). The relevant details about the electrolyzer 13

ACS Paragon Plus Environment

ACS Energy Letters

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 14 of 25

are shown in Figure S38. These results provide an initial assessment of the feasibility for using Mo6Ni6C/NF in operational water electrolysis systems.

In conclusion, for the first time, Mo6Ni6C has been discovered as the high-performance and low-cost electrocatalyst for hydrogen production. Impressively, it exhibits the lowest overpotentials of -51 mV in acidic water at -10 mA cm-2. More importantly, the catalyst shows no evidence of degradation following more than 200 hours of operation in 0.5 M H2SO4. The DFT calculations indicate that the most proper active sites for the Mo6Ni6C are carbon atoms on its (422) plane. Furthermore, the XAFS results confirm the presence of abundant Mo-Mo bonds in the structure, which leads to a better stability for the catalyst. At the same time, Mo6Ni6C also shows outstanding performance in alkali for delivering the j of -10 mA cm-2 at the ƞ of -34 mV for more than 300 hours. The high intrinsic catalytic activity and chemical stability of Mo6Ni6C make it one of the most effective HER electrocatalysts, showing potential to work in an operational device environment. These findings represent an important advance towards expanding the scope of high-performance hydrogen evolution catalysts for the large-scale applications of AWE and PEM electrolyzer.

14

ACS Paragon Plus Environment

Page 15 of 25

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Energy Letters

Figure 1. Schematic representation of the structure of Mo6Ni6C, demonstrating the origin of its excellent HER activity from carbon active sites and outstanding stability form corrosion-stable Mo-Mo bonds.

15

ACS Paragon Plus Environment

ACS Energy Letters

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 16 of 25

Figure 2. (a) XRD patterns of Mo6Ni6C powder and Mo6Ni6C/NF. (b-d) SEM images of Mo6Ni6C/NF at different magnifications. (e-g) TEM images of Mo6Ni6C. Inset of (g): HRTEM image and corresponding SAED pattern of Mo6Ni6C.

16

ACS Paragon Plus Environment

Page 17 of 25

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Energy Letters

Figure 3. XPS spectra of Mo6Ni6C/NF for (a) Mo 3d and (b) Ni 2p3/2. (c) Mo K-edge XANES spectra for the samples of Mo6Ni6C/NF, Mo foil, NiMo alloy, Mo2C and MoO3. The oxidation state of Mo atoms for NiMo alloy indicates that they get oxidized easily in the air. (d) Ni K-edge XANES spectra for the samples of Mo6Ni6C, NiMo alloy, Ni foil and NiO. (e) FT of Mo K-edge EXAFS for the samples of Mo6Ni6C/NF and controlled samples, revealing the existence Mo-Mo bond in the Mo6Ni6C/NF. (f) FT of Ni K-edge EXAFS for the samples of Mo6Ni6C, NiMo alloy,

17

ACS Paragon Plus Environment

ACS Energy Letters

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 18 of 25

Ni foil and NiO, illustrating the existence of Ni-Ni bonds in Mo6Ni6C sample, further illustrating its metallic property.

18

ACS Paragon Plus Environment

Page 19 of 25

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Energy Letters

Figure 4. (a) LSV curves, (b) Nyquist and (c) Tafel plots for HER for the samples of Mo6Ni6C/NF, Pt/C/NF, NiMo/NF, Mo2C/NF and blank Ni foam (the catalyst loading is about 18 mg cm-2 for every sample). Mo6Ni6C/NF possesses the fastest charge transport process among all the controlled catalysts. The Cdl of Mo6Ni6C/NF in 0.5 M H2SO4 was assessed utilizing a series of cyclic voltammetry (CV) cycles at different scan rates. (d) Scan rate dependence of the current densities (△j = ja - jc) for Mo6Ni6C/NF at 0.03 V vs. RHE. Inset of (d): Cyclic voltammograms of Mo6Ni6C/NF at different scan rates (from to 1 to 7 mV/s with an increment of 2 mV/s).

19

ACS Paragon Plus Environment

ACS Energy Letters

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 20 of 25

Figure 5. Chronopotentiometric curve of Mo6Ni6C/NF at j of -10 mA cm-2 for continuous HER process. Inset: the corresponding faradaic efficiency from gas chromatography measurement of evolved H2 for 10 hours of the chronopotentiometric test.

20

ACS Paragon Plus Environment

Page 21 of 25

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Energy Letters

ASSOCIATED CONTENT

Supporting Information.

Experimental section, additional SEM and TEM figures, XRD, XPS and XAFS analysis, electrochemical data, Table S1 for comparison of HER performance (PDF)

AUTHOR INFORMATION

Corresponding Author *Email: [email protected]

Notes The authors declare no competing financial interest.

ACKNOWLEDGMENT This work was financially supported by National Natural Science Foundation of China (21573068, 21503079), SRF for ROCS, SEM, SRFDP, Program of Shanghai Subject Chief Scientist (15XD1501300), Shanghai Municipal Natural Science Foundation (14ZR1410200). The authors also thank the crew of 1W1B beamline of Beijing Synchrotron Radiation Facility for the constructive assistance in the XAFS measurements and date analyses.

REFERENCES (1) Khaselev, O.; Turner, J. A. A monolithic Photovoltaic-Photoelectrochemical Device for Hydrogen Production via Water Splitting. Science 1998, 280, 425-427. (2) Carmo, M.; Fritz, D. L.; Mergel, J.; Stolten, D. A Comprehensive Review on 21

ACS Paragon Plus Environment

ACS Energy Letters

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 22 of 25

PEM Water Electrolysis. Int. J. Hydrogen Energy 2013, 38, 4901-4934. (3) Li, H.; Tsai, C.; Koh, A. L.; Cai, L.; Contryman, A. W.; Fragapane, A. H.; Zhao, J.; Han, H. S.; Manoharan, H. C.; Abild-Pedersen, F. et al. Activating and Optimizing MoS2 Basal Planes for Hydrogen Evolution through the Formation of Strained Sulphur Vacancies. Nature Mater. 2016, 15, 48-53. (4) Subbaraman, R.; Tripkovic, D.; Strmcnik, D.; Chang, K.-C.; Uchimura, M.; Paulikas, A. P.; Stamenkovic, V.; Markovic, N. M. Enhancing Hydrogen Evolution Activity in Water Splitting by Tailoring Li+-Ni(OH)2-Pt interfaces. Science 2011, 334, 1256-1260. (5) Zou, X.; Zhang, Y. Noble Metal-Free Hydrogen Evolution Catalysts for Water Splitting. Chem. Soc. Rev. 2015, 44, 5148-5180. (6) Nocera, D. G. The Artificial Leaf. Acc. Chem. Res. 2012, 45, 767-776. (7) Staszak-Jirkovský, J.; Malliakas, C. D.; Lopes, P. P.; Danilovic, N.; Kota, S. S.; Chang, K.-C.; Genorio, B.; Strmcnik, D.; Stamenkovic, V. R.; Kanatzidis, M. G. et al. Design of Active and Stable Co-Mo-Sx as pH-Universal Catalysts for the Hydrogen Evolution Reaction. Nature Mater. 2016, 15, 197-203. (8) Zhang, J.; Wang, T.; Liu, P.; Liao, Z.; Liu, S.; Zhuang, X.; Chen, M.; Zschech, E.; Feng, X. Efficient Hydrogen Production on MoNi4 Electrocatalysts with Fast Water Dissociation Kinetics. Nat. Commun. 2017, 8. 15437. (9) Chen, Y.-Y.; Zhang, Y.; Zhang, X.; Tang, T.; Luo, H.; Niu, S.; Dai, Z.-H.; Wan, L.-J.; Hu, J.-S. Self-Templated Fabrication of MoNi4/MoO3-x Nanorod Arrays with Dual Active Components for Highly Efficient Hydrogen Evolution. Adv. Mater. 2017, 29, 1703311. (10) Csernica, P. M.; McKone, J. R.; Mulzer, C. R.; Dichtel, W.R.; Abruña, H. D.; DiSalvo, F. J. Electrochemical Hydrogen Evolution at Ordered Mo7Ni7. ACS Catal., 2017, 7, 3375-3383. (11) Chen, W-F.; Sasaki, K.; Ma, C.; Frenkel, A. I.; Marinkovic, N.; Muckerman, J. T.; Zhu, Y.; Adzic, R. R. Hydrogen-Evolution Catalysts Based on Non-Noble Metal Nickle-Molybdenum Nitride Nanosheets. Angew. Chem. Int. Ed. 2012, 51, 6131-6135. (12) Li, J-S.; Wang, Y.; Liu, C.-H.; Li, S.-L.; Wang, Y.-G.; Dong, L.-Z.; Dai, Z.-H.; Li, Y.-F.; Lan, Y.-Q. Coupled Molybdenum Carbide and Reduced Graphene Oxide Electrocatalysts for Efficient Hydrogen Evolution. Nat. Commun. 2016, 7, 11204. (13) Zhu, J.; Sakaushi, K.; Clavel, G.; Shalom, M.; Antonietti, M.; Fellinger, T.-P. A General Salt-Templating Method to Fabricate Vertically Aligned Graphitic Carbon Nanosheets and Their Metal Carbide Hybrids for Superior Lithium Ion Batteries and Water Splitting. J. Am. Chem. Soc. 2015, 137, 5480-5485. (14) Miao, J.; Xiao, F.-X.; Yang, H. B.; Khoo, S. Y.; Chen, J.; Fan, Z.; Hsu, Y.-Y.; Chen, H. M.; Zhang, H.; Liu, B. Hierarchical Ni-Mo-S Nanosheets on Carbon Fiber Cloth: A Flexible Electrode for Efficient Hydrogen Generation in Neutral Electrolyte. Sci. Adv. 2015, 1, e1500259.

22

ACS Paragon Plus Environment

Page 23 of 25

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Energy Letters

(15) Cao, B.; Veith, G. M.; Neuefeind, J. C.; Adzic, R. R.; Khalifah, P. G. Mixed Close-packed Cobalt Molybdenum Nitrides as Non-Noble Metal Electrocatalysts for The Hydrogen Evolution Reaction. J. Am. Chem. Soc. 2013, 135, 19186-19192. (16) Yan, H.; Tian, C.; Wang, L.; Wu, A.; Meng, M.; Zhao, L.; Fu, H. Phosphorus-modified Tungsten Nitride/Reduced Graphene Oxide as A High-Performance, Non-Noble-Metal Electrocatalyst for The Hydrogen Evolution Reaction. Angew. Chem. Int. Ed. 2015, 54, 6325-6329. (17) Wang, F.; Sun, Y.; He, Y.; Liu, L.; Xu, J.; Zhao, X.; Yin, G.; Zhang, L.; Li, S.; Mao, Q. et al. Highly Efficient and Durable MoNiNC Catalyst for Hydrogen Evolution Reaction. Nano Energy. 2017, 37, 1-6. (18) Popczun, E. J.; Read, C. G.; Roske, C. W.; Lewis, N. S.; Schaak, R. E. Highly Active Electrocatalysis of the Hydrogen Evolution Reaction by Cobalt Phosphide Nanoparticles. Angew. Chem. Int. Ed. 2014, 53, 5427-5430. (19) Tian, J.; Liu, Q.; Asiri, A. M.; Sun, X. Self-supported Nanoporous Cobalt Phosphide Nanowire Arrays: An Efficient 3D Hydrogen-Evolving Cathode over The Wide Range of pH 0-14. J. Am. Chem. Soc. 2014, 136, 7587-7590. (20) Lukowski, M. A.; Daniel, A. S.; Meng, F.; Forticaux, A.; Li, L.; Jin, S. Enhanced Hydrogen Evolution Catalysis from Chemically Exfoliated Metallic MoS2 Nanosheets. J. Am. Chem. Soc. 2013, 135, 10274-10277. (21) Geng, X.; Sun, W.; Wu, W.; Chen, B.; Al-Hilo, A.; Benamara, M.; Zhu, H.; Watanabe, F.; Cui, J.; Chen, T. Pure and Stable Metallic Phase Molybdenum Disulfide Nanosheets for Hydrogen Evolution Reaction. Nat. Commun. 2016, 7, 10672. (22) Chen, J. G. Carbide and Nitride Overlayers on Early Transition Metal Surfaces: Preparation, Characterization, and Reactivities. Chem. Rev. 1996, 96, 1477-1498. (23) Zeng, M.; Li, Y. Recent Advances in Heterogeneous Electrocatalysts for the Hydrogen Evolution Reaction. J. Mater. Chem. A 2015, 3, 14942-14962. (24) Alexander, A. M.; Hargreaves, J. S. J. Chem. Soc. Rev. 2010, 39, 4388-4401. (25) Xiao, P.; Ge, X.; Wang, H.; Liu, Z.; Fisher, A.; Wang, X. Novel Molybdenum Carbide-Tungsten Carbide Composite Nanowires and Their Electrochemical Activation for Efficient and Stable Hydrogen Evolution. Adv. Funct. Mater. 2015, 25, 1520-1526. (26) Xiao, P.; Yan, Y.; Ge, X.; Liu, Z.; Wang, J.-Y.; Wang, X. Investigation of Molybdenum Carbide Nano-Rod as An Efficient and Durable Electrocatalyst for Hydrogen Evolution in Acidic and Alkaline Media. Appl. Catal. B: Environ. 2014, 154-155, 232-237. (27) Al-Megren, H. A.; Xiao, T. C.; Gonzalez-Cortes, S. L.; Al-Khowaiter, S. H.; Green, M. L. H. Alternative Catalytic Materials: Carbides, Nitrides, Phosphides and Amorphous Boron Alloys. J. Mol. Catal. A-Chem. 2005, 225, 143-148. (28) Enyashin, A. N.; Bar-Sadan, M. B.; Houben, L.; Seifert, G. Line Defects in Molybdenum Disulfide Layers J. Phys. Chem. C. 2013, 117, 10842-10848. 23

ACS Paragon Plus Environment

ACS Energy Letters

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 24 of 25

(29) Krüger, P. Molybdenum Clusters on a TiO2 (110) Substrate Studied by Density Functional Theory. J. Phys. Chem. C. 2009, 113, 5308-5312. (30) Chen, W-F.; Muckerman, J. T.; Fujita, E. Recent Developments in Transition Metal Carbides and Nitrides as Hydrogen Evolution Electrocatalysts. Chem. Commun. 2013, 49, 8896-8909. (31) Wang, S.; Wang, J.; Zhu, M.; Bao, X.; Xiao, B.; Su, D.; Li, H.; Wang, Y. Molybdenum-carbide-modified Nitrogen-Doped Carbon Vesicle Encapsulating Nickel Nanoparticles: A Highly Efficient, Low-Cost Catalyst for Hydrogen Evolution Reaction. J. Am. Chem. Soc. 2015, 137, 15753-15759. (32) Ma, R.; Zhou, Y.; Chen, Y.; Li, P.; Liu, Q.; Wang, J. Ultrafine Molybdenum Carbide Nanoparticles Composited with Carbon as A Highly Active Hydrogen-Evolution Electrocatalyst. Angew. Chem. Int. Ed. 2015, 54, 14723-14727. (33) You, B.; Jiang, N.; Sheng, M.; Bhushan, M. W.; Sun, Y. Hierarchically Porous Urchin-Like Ni2P Superstructures Supported on Nickel Foam as Efficient Bifunctional Electrocatalysts for Overall Water Splitting. ACS Catal. 2016, 6, 714-721. (34) Huang, Z.; Chen, Z.; Chen, Z.; Lv, C.; Meng, H.; Zhang, C. Ni12P5 Nanoparticles as An Efficient Catalyst for Hydrogen Generation via Electrolysis and Photoelectrolysis. ACS Nano 2014, 8, 8121-8129. (35) Lee, C.-P.; Chen, W.-F.; Billo, T.; Lim, Y.-G.; Fu, F.-Y.; Samireddi, S. N.; Lee, C.-H.; Hwang, J.-S.; Chen, K.-H.; Chen, L.-C. Beaded-Stream-Like CoSe2 Nanoneedles Array for Efficient Hydrogen Evolution Electrocatalysis. J. Mater. Chem. A 2016, 4, 4553-4561. (36) Liu, R.; Zhang, G.; Cao, H.; Zhang, S.; Xie, Y.; Haider, A.; Kortz, U.; Chen, B.; Dalal, N. S.; Zhao, Y. et al. Enhanced Proton and Electron Reservoir Abilities of Polyoxometalate Grafted on Graphene for High-Performance Hydrogen Evolution. Energy Environ. Sci. 2016, 9, 1012-1023. (37) Zhang, K.; Zhao, Y.; Zhang, S.; Yu, H.; Chen, Y.; Gao, P.; Zhu, C. MoS2 Nanosheet/Mo2C-Embedded N-Doped Carbon Nanotubes: Synthesis and Electrocatalytic Hydrogen Evolution Performance. J. Mater. Chem. A 2014, 2, 18715-18719. (38) Zhang, K.; Zhao, Y.; Fu, D.; Chen, Y. Molybdenum Carbide Nanocrystals Embedded N-Doped Carbon Nanotubes as Electrocatalysts for Hydrogen Generation. J. Mater. Chem. A 2015, 3, 5783-5788. (39) Shi, Z.; Nie, K.; Shao, Z.-J.; Gao, B.; Lin, H.; Zhang, H.; Liu, B.; Wang, Y.; Zhang, Y.; Sun, X. et al. Phosphorus-Mo2C@Carbon Nanowires Toward Efficient Electrochemical Hydrogen Evolution: Composition, Structural and Electronic Regulation. Energy Environ. Sci. 2017, 10, 1262-1271. (40) Wan, C.; Regmi, Y. N.; Leonard, B. M. Multiple Phases of Molybdenum Carbide as Electrocatalysts for the Hydrogen Evolution Reaction. Angew. Chem. Int. Ed. 2014, 53, 6407-6410. (41) Liu, Y.; Yu, G.; Li, G.-D.; Sun, Y.; Asefa, T.; Chen, W.; Zou, X. Coupling Mo2C 24

ACS Paragon Plus Environment

Page 25 of 25

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Energy Letters

with Nitrogen-Rich Nanocarbon Leads to Efficient Hydrogen-Evolution Electrocatalytic Sites. Angew. Chem. Int. Ed. 2015, 54, 10752-10757. (42) Zheng, Y.; Jiao, Y.; Jaroniec, M.; Qiao, S. Z. Advancing the Electrochemistry of the Hydrogen Evolution Reaction through Combining Experiment and Theory. Angew. Chem. Int. Ed. 2015, 54, 52-65. (43) Xu, X.; Song, F.; Hu, X. A Nickel Iron Diselenide-Derived Efficient Oxygen-Evolution Catalyst. Nat. Commun. 2016, 7, 12324.

25

ACS Paragon Plus Environment