BiVO4 Type-II Heterojunction Arrays Decorated with Oxygen

Dec 18, 2018 - The type-II WO3/BiVO4 heterojunction arrays are firstly prepared by .... Corby, Francàs, Selim, Sachs, Blackman, Kafizas, and Durrant...
2 downloads 0 Views 1MB Size
Subscriber access provided by University of South Dakota

Energy, Environmental, and Catalysis Applications

WO3/BiVO4 Type-II Heterojunction Arrays Decorated with Oxygendeficient ZnO Passivation Layer: a Highly Efficient and Stable Photoanode Zizai Ma, Kai Song, Lin Wang, Fengmei Gao, Bin Tang, Huilin Hou, and Weiyou Yang ACS Appl. Mater. Interfaces, Just Accepted Manuscript • DOI: 10.1021/acsami.8b18261 • Publication Date (Web): 18 Dec 2018 Downloaded from http://pubs.acs.org on December 20, 2018

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 31 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

WO3/BiVO4 Type-II Heterojunction Arrays Decorated with Oxygen-deficient ZnO Passivation Layer: a Highly Efficient and Stable Photoanode Zizai Ma,†, ‡ Kai Song,† Lin Wang,‡ Fengmei Gao,‡ Bin Tang,*,† Huilin Hou,*,‡ and Weiyou Yang*,‡ † Research

Institute of Surface Engineering, Taiyuan University of Technology, Taiyuan, 030024, P.R. China.



Institute of Materials, Ningbo University of Technology, Ningbo, 315211, P.R. China.

KEYWORDS: WO3/BiVO4, type-II heterojunction, passivation layer, nanoplate arrays, photoelectrochemistry

ACS Paragon Plus Environment

1

ACS Applied Materials & Interfaces 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Page 2 of 31

ABSTRACT: In present work, we report a ternary WO3/BiVO4/ZnO photoanode with boosted PEC efficiency and stability towards highly efficient water splitting. The type-II WO3/BiVO4 heterojunction arrays are firstly prepared by hydrothermal growth of WO3 nanoplate arrays onto the substrates of fluorine-doped tin oxide (FTO) coated glasses, followed by spin-coating of BiVO4 layers onto the WO3 nanoplate surfaces. After that, thin ZnO layers are further introduced onto the WO3/BiVO4 heterojunction arrays via atomic layer deposition (ALD), leading to the construction of ternary WO3/BiVO4/ZnO photoanodes. It is verified that the ZnO thin layer in WO3/BiVO4/ZnO photoanode contains abundant oxygen vacancies, which could be acted as an effective passivation layer to enhance the charge separation and surface water oxidation kinetics of photogenerated carriers. The as-prepared WO3/BiVO4/ZnO photoanode produces a photocurrent of 2.96 mA cm-2 under simulated sunlight with an incident photon-to-current conversion efficiency (IPCE) of ∼72.8 % at 380 nm at a potential of 1.23 V vs. RHE without cocatalysts, both of which are comparable to the state-of-art WO3/BiVO4 counterparts. Moreover, the photocurrent of WO3/BiVO4/ZnO photoanode shows only 9 % decay after 6 h, suggesting its high photoelectrochemical (PEC) stability.

ACS Paragon Plus Environment

2

Page 3 of 31 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

ACS Applied Materials & Interfaces

INTRODUCTION The prompt growing need for clean energy to release our dependence on fossil fuel has motivated

the

scientific

community

to

harvest

the

solar

energy.1-2

Typically,

photoelectrochemical (PEC) water splitting into hydrogen driven by solar light has attracted worldwide attention as one of the most attractive and sustainable solution.3-6 Such PEC water splitting process relies fundamentally on the development of stable, economical, and efficient photoanodes. Among the semiconductor photoanode family, the earth-abundant metal oxides such as TiO2,7-8 WO3,9 Fe2O310 and BiVO411-12 are explored as the popular candidates. Particularly, WO3 and BiVO4 are recognized as the attractive and promising photoanode materials, owing to their physical and chemical stability, low cost with desired narrow band gaps.12-15 However, WO3 possesses a weak visible light response (