Addition/Correction pubs.acs.org/IECR
Correction for “Surface-Modified Polyimide Fiber-Filled Ethylenepropylenediene Monomer Insulations for a Solid Rocket Motor: Processing, Morphology, and Properties” Zhongqiang Han, Shengli Qi, Wei Liu, Enlin Han, Zhanpeng Wu,* and Dezhen Wu Ind. Eng. Chem. Res. 2013, 52 (3), 1284−1290; DOI: 10.1021/ie302274e
B
ecause of a production error, the version of this paper that was published online January 23, 2013 needs to be corrected. Corrections should appear as shown below: (1) Throughout the paper, the word “ethylenepropylenediene” should be replaced by “ethylene-propylene-diene”. (2) In section 2.3, “Preparation of Short Fiber-Filled EPDM Thermal Insulations” (on page 1285), the first sentence should read as follows: “In the formulations of EPDM/PI short fiber insulations (Table S2 in the Supporting Information), the variable contents of surface-modified PI fibers were 0, 2.5, 5, 10, 13, and 15 g per 100 parts of rubber, while the contents of other ingredients were constant.” (3) In the Acknowledgments section (on page 1289), the following sentence should be added: “The authors would also like to thank National Natural Science Foundation of China (Project No. 50973006) for their financial support.”
■
AUTHOR INFORMATION
Corresponding Author
*E-mail:
[email protected].
Published: February 18, 2013 © 2013 American Chemical Society
3042
dx.doi.org/10.1021/ie400286w | Ind. Eng. Chem. Res. 2013, 52, 3042−3042
