Addition/Correction www.acsami.org
Cite This: ACS Appl. Mater. Interfaces XXXX, XXX, XXX−XXX
Correction to “Isotropic Negative Thermal Expansion Metamaterials” Lingling Wu, Bo Li, and Ji Zhou*
Downloaded via 109.94.173.150 on February 12, 2019 at 18:18:52 (UTC). See https://pubs.acs.org/sharingguidelines for options on how to legitimately share published articles.
ACS Appl. Mater. Interfaces 2016, 8 (27), 17721−17727. DOI: 10.1021/acsami.6b05717 Page 17724. The following errors appear in the article. The y axis should be ΔL/L0 rather than Coefficient of Thermal Expansion (1/K) in Figure 5A. The x-axis should be Diameter (mm) rather than Node Radius (mm) in Figure 5B. These errors do not affect the results or conclusions of the paper. The authors apologize for any confusion this may have caused. The correct Figure 5 appears below:
Figure 5. Three-dimensional experiment. (A) Measured relationship between the thermal expansion of the component materials of the three-dimensional anti-tetrachiral samples and the temperature. (B) Measured relationship between node radius and the effective CTE of the three-dimensional anti-tetrachiral samples. (C) Sample with diameter = 20 mm placed in a vacuum drying oven and the measured lengths of the sample. (D) Deformation of the tested sample with diameter = 20 mm after the increasing of temperature.
© XXXX American Chemical Society
A
DOI: 10.1021/acsami.9b01416 ACS Appl. Mater. Interfaces XXXX, XXX, XXX−XXX
