Addition/Correction www.acsami.org
Correction to “Reversibly Actuating Solid Janus Polymeric Fibers” Leonid Ionov,* Georgi Stoychev, Dieter Jehnichen, and Jens Uwe Sommer ACS Appl. Mater. Interfaces 2017, 9 (5), 4873−4881. DOI:10.1021/acsami.6b13084
T
he layout of Table 1 was incorrect. The correct layout is:
Table 1. Parameters for SAX and WAXS (min··· max)
q (nm−1)
d (nm)
2Θ (deg)
lsample‑det (mm)
tacc (s)
SAXS WAXS
0.05···2.0 0.9···24.4
125···3.14 7.0···0.257
0.007···2.8 1.27···34.8
∼1041 ∼101
7200 1800
In the first paragraph under Table 1 in the original paper, the sentence “... azimuthal profiles I(φ) [here taken at q = 5 nm−1 (WAXS) and 0.4 nm−1 (SAXS), respectively].” should be corrected to “... azimuthal profiles I(φ) [here taken at q = 15 nm−1 (WAXS) and 0.4 nm−1 (SAXS), respectively].” In the eighth line under Table 1, the sentence “Here, θ denotes the angle between the liquid-crystal molecular axis and the local director.” should be corrected to “Here, φ denotes the angle between the liquid-crystal molecular axis.”
Published: July 19, 2017 © 2017 American Chemical Society
25642
DOI: 10.1021/acsami.7b08820 ACS Appl. Mater. Interfaces 2017, 9, 25642−25642
