Developing Street-Level PM2.5 and PM10 Land ... - ACS Publications

Jul 6, 2016 - ABSTRACT: Monitoring street-level particulates is essential to air quality management but challenging in high-density. Hong Kong due to ...
1 downloads 10 Views 813KB Size
Subscriber access provided by University of Sussex Library

Article 2.5

10

Developing Street-level PM and PM Land Use Regression Models in High-Density Hong Kong with Urban Morphological Factors Yuan Shi, Kevin Ka-Lun Lau, and Edward Ng Environ. Sci. Technol., Just Accepted Manuscript • DOI: 10.1021/acs.est.6b01807 • Publication Date (Web): 06 Jul 2016 Downloaded from http://pubs.acs.org on July 6, 2016

Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.

Environmental Science & Technology is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.

Page 1 of 26

Environmental Science & Technology

1

Developing Street-level PM2.5 and PM10 Land Use

2

Regression Models in High-Density Hong Kong

3

with Urban Morphological Factors

4

Yuan Shi*,† Kevin Ka-Lun Lau†, ‡ and Edward Ng,†, ‡

5

†School

6

China

7

‡The

8

Hong Kong, Shatin, NT, Hong Kong SAR, China

9

*The Corresponding Author: [email protected]

of Architecture, The Chinese University of Hong Kong, Shatin, NT, Hong Kong SAR,

Institute of Environment, Energy and Sustainability (IEES), The Chinese University of

10

ABSTRACT. Monitoring street-level particulates is essential to air quality management but

11

challenging in high-density Hong Kong due to limitations in local monitoring network and the

12

complexities of street environment. By employing vehicle-based mobile measurements, Land

13

Use Regression (LUR) models are developed to estimate the spatial variation of PM2.5 and PM10

14

in the downtown area of Hong Kong. Sampling runs were conducted along routes measuring a

15

total of 30km during selected measurement period of total 14 days. In total, 321 independent

16

variables were examined to develop LUR models by using stepwise regression with PM2.5 and

17

PM10 as dependent variables. Approximately, 10% increases in the model adjusted R2 were

ACS Paragon Plus Environment

1

Environmental Science & Technology

Page 2 of 26

18

achieved by integrating urban/building morphology as independent variables into the LUR

19

models. Resultant LUR models show that the most decisive factors on street-level air quality in

20

Hong Kong are frontal area index, an urban/building morphological parameter, and road network

21

line density and traffic volume, two parameters of road traffic. The adjusted R2 of the final LUR

22

models of PM2.5 and PM10 are 0.633 and 0.707 respectively. These results indicate that urban

23

morphology is more decisive to the street-level air quality in high-density cities than other cities.

24

Air pollution hotspots are also identified based on the LUR mapping.

25

TOC ART

26 27

1. INTRODUCTION

28

Many epidemiological investigations proved that particulate matters (PM) were associated with

29

adverse health outcomes. Particulate air pollution leads to higher health risks of cardiovascular

30

and respiratory diseases 1. These health impacts and risks are further accentuated in high-density

31

urban environment. In cities with compact urban development, the dispersion of street-level

32

particulates is impeded by their high-density urban morphology because densely-constructed

33

buildings block air ventilation and consequently retard the dispersion 2. Several retrospective

34

epidemiological studies in Hong Kong showed that health risks (measured as the hospitalization

35

and mortality) connected to cardiovascular and respiratory diseases were significantly associated

ACS Paragon Plus Environment

2

Page 3 of 26

Environmental Science & Technology

36

with both long-term and short-term exposure to PM2.5 and PM10 3–8. Therefore, monitoring street-

37

level air pollution in high-density urban environment is essential to prevent or mitigate the health

38

risks. Several studies have been conducted to observe the temporal and spatial variation of street-

39

level particulate air pollution in Hong Kong by using either historical monitoring data from the

40

existing Air Quality Monitoring Network (AQMN) of Hong Kong Environmental Protection

41

Department (HKEPD) 9,10 or stationary measurements at sampling sites 11–14. However, the

42

coverage of such monitoring network is very limited. Among the 15 AQMN stations, only three

43

roadside stations monitor street-level air quality within the urban environment (Figure S-4, SI),

44

while the number of roadside sampling locations in other studies are also limited (not more than

45

three in general). The complex urban morphology and compact urban traffic network in Hong

46

Kong make the conditions of air quality vary significantly from site to site. However, the street-

47

level air quality of many high-density sites and those with heavy traffic in downtown Hong Kong

48

is not monitored by AQMN. Thus, quantifying the street-level air pollution and identifying

49

hotspots of human exposure are difficult by using AQMN, because it provides insufficient

50

information about the spatial variation of pollutants.

51

Land Use Regression (LUR) has become a popular method to explore the spatial variation of

52

outdoor air pollution in environmental studies and to assess the health risks of human exposure

53

to pollutants in epidemiological and public health studies 15 in Europe 16–23 and North America

54

24–28.

55

extensive applications of LUR models is mainly because it can be used to evaluate human

56

exposure to air pollution in unmonitored areas and to identify urban air pollution hotspots which

57

are vital to epidemiological and environmental studies 32.

The application of LUR is also increasing in other regions 29–31. The reason for such

ACS Paragon Plus Environment

3

Environmental Science & Technology

Page 4 of 26

58

The aim of this study is to develop LUR models for a sub-tropical high-density urban

59

environment by focusing on the unique urban scenario of Hong Kong in order to supplement the

60

inadequacy of the local monitoring network and provide a better understanding of the spatial

61

variation of street-level air pollution. The compact high-density urban development of Hong

62

Kong forms much higher buildings and very deep street canyons with intensive traffic and

63

pedestrian activities, which makes it almost impossible to use conventional fixed monitoring

64

locations to represent the conditions of street-level human exposure (Section 1, SI). In this

65

study, under the special circumstance of Hong Kong’s street environment, vehicle-based mobile

66

measurements of particulate air pollution are employed as the approach to conduct the sampling

67

of the dataset for LUR development. Mobile measurements are conducted in designated periods

68

and routes in order to minimize the impact of temporal variability and extreme weather

69

conditions on LUR model development. Correlation analysis between outdoor air pollution and

70

building morphology is performed by integrating urban/building morphological parameters into

71

the LUR model. As such, the study results can be not only used for the purpose of air quality

72

management and human exposure evaluation but also directly as a reference in the optimization

73

of urban development strategies and decision-making in urban planning on the basis of air

74

quality considerations.

75

2. MATERIALS AND METHODS

76

Previous LUR studies typically set up 20-100 fixed sampling locations within the study area 15.

77

However, compact urban development, crowded space and bustling activities occurred within

78

street canyons in the downtown area of Hong Kong has made it almost impossible to set up

79

sufficient fixed long-term street-level sampling locations without random interference. In this

80

study, the sampling of the concentration of street-level particulate air pollution is conducted in

ACS Paragon Plus Environment

4

Page 5 of 26

Environmental Science & Technology

81

the downtown area of Hong Kong by using mobile measurements which were tested to be

82

feasible and provide valid data for such a purpose 33,34. LUR models of street-level PM2.5 and

83

PM10 were then developed.

84

2.1 THE MOBILE MEASUREMENTS. Mobile measurements have been increasingly used to

85

monitor the air pollution in the last decade 35–43, especially for the development of LUR models

86

33,34,44–46.

87

variability of air pollutants concentration at a much higher spatial resolution and locate the place

88

where its concentration culminates high level (“air pollution hotspots”) that may not be possible

89

to be identified by using a limited number of fixed monitoring locations, especially in cases like

90

Hong Kong (Section 1, SI).

91

2.1.1 THE MOBILE MEASUREMENT PLATFORM. A Toyota HiAce vehicle with necessary

92

particulate matter monitor and meteorological sensors on board served as the mobile

93

measurement platform that is used to measure the concentration of air particulates and

94

meteorological variables. The concentration levels of PM2.5 and PM10 (the concentration level of

95

particles |t|) and variance inflation factor (VIF) of each independent variables

225

were checked to confirm the variables significance level and ensure that there is no collinearity

226

issues in resultant regression models (Section 3.2.3, SI). The adjusted R2 values of each model

227

were examined to evaluate the model performance. Both the root-mean-square error (RMSE)

228

from leave-one-out cross validation (LOOCV) and the adjusted R2 of 10-fold cross validation

229

were used to validate the LUR models (shown in Table 3, details in Section 3.2.4, SI). The final

230

models also show reasonably good performance (0.582 and 0.611 for PM2.5 and PM10

231

respectively) in an external validation using a separately sampled mobile measurement dataset

232

(Section 3.2.5, SI).

233

3. RESULTS

234

3.1 THE FINAL LUR MODELS OF PM2.5 AND PM10. Using spatially aggregated PM2.5 and

235

PM10 as the dependent variables, final LUR models were established. The adjusted R2 values of

236

final LUR models for the 300m-spatially aggregated concentration of both PM2.5 and PM10 are

237

0.633 and 0.707 respectively (300m-aggregated dependent variables provide the best model

238

performance, which is consistent with the semivariogram modeling results in Section 2.2. Other

239

models using different dependent variables aggregation resolution are shown in Table S-12, SI

240

for comparison). As indicated by the final models of PM2.5 and PM10 (Table 3 and Figure S-20,

241

SI), the most essential determinants of the concentration of street-level particulate air pollution in

242

the downtown area of Hong Kong are building morphology and urban road traffic. These results

243

indicate that, beside the commonly applied LUR independent variables such as land use and

244

traffic, building morphology is also one of the determinants of the street-level particulate air

245

pollution concentration in the Hong Kong’s high-density urban environment. To quantify the

ACS Paragon Plus Environment

14

Page 15 of 26

Environmental Science & Technology

246

model performance improvement introduced by adding urban morphology as independent

247

variables, models completely excluding urban morphology were also established for comparison,

248

which showed an adjusted R2 increase of 0.111 and 0.150 on the model performance of PM2.5

249

and PM10 respectively when building morphological variables were used in modeling (Section

250

3.3, SI). The concentration of street-level air pollutants is largely determined by both emission

251

and dispersion of pollutants. Road traffic measured as the road line density and traffic volume

252

represents the distribution of pollution sources and emission intensity. Building morphology

253

quantified by FAI directly affects air ventilation in urban areas and the dispersion capacity of air

254

pollution, especially in extremely compact urban environment. It should be noted that, as a

255

measure of evaluating urban air ventilation, FAI represents the horizontal permeability of an

256

urban area to prevailing wind. It implies that enhancing urban ventilation by optimizing the

257

building morphology is more important to high-density cities like Hong Kong than other low-

258

density or mid-density cities when dealing with street-level air pollution.

259

Table 3. Summary of the final resultant LUR regression models of PM2.5 and PM10. SUMMARY OF FIT OF PM2.5 LUR MODEL Spatially averaged PM2.5 data using spatial resolution of 300m Dependent Variable 2 0.646 R 2 0.633 Adjusted R 6.516 RMSE 51.759 Mean of Response |t| VIF Intercept 27.363 2.458 11.13