Subscriber access provided by George Mason University Libraries & VIVA (Virtual Library of Virginia)
Article 0.48
0.52
Domain Configuration and Thermal Stability of (K Na ) (Nb Sb )O-Bi (Na K ) ZrO Piezoceramics with High d Coefficient 0.96
0.04
3
0.50
0.82
0.18
0.50
3
33
Yalin Qin, J. L. Zhang, Weizeng Yao, Chaojing Lu, and Shujun Zhang ACS Appl. Mater. Interfaces, Just Accepted Manuscript • DOI: 10.1021/acsami.6b00377 • Publication Date (Web): 04 Mar 2016 Downloaded from http://pubs.acs.org on March 10, 2016
Just Accepted “Just Accepted” manuscripts have been peer-reviewed and accepted for publication. They are posted online prior to technical editing, formatting for publication and author proofing. The American Chemical Society provides “Just Accepted” as a free service to the research community to expedite the dissemination of scientific material as soon as possible after acceptance. “Just Accepted” manuscripts appear in full in PDF format accompanied by an HTML abstract. “Just Accepted” manuscripts have been fully peer reviewed, but should not be considered the official version of record. They are accessible to all readers and citable by the Digital Object Identifier (DOI®). “Just Accepted” is an optional service offered to authors. Therefore, the “Just Accepted” Web site may not include all articles that will be published in the journal. After a manuscript is technically edited and formatted, it will be removed from the “Just Accepted” Web site and published as an ASAP article. Note that technical editing may introduce minor changes to the manuscript text and/or graphics which could affect content, and all legal disclaimers and ethical guidelines that apply to the journal pertain. ACS cannot be held responsible for errors or consequences arising from the use of information contained in these “Just Accepted” manuscripts.
ACS Applied Materials & Interfaces is published by the American Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Published by American Chemical Society. Copyright © American Chemical Society. However, no copyright claim is made to original U.S. Government works, or works produced by employees of any Commonwealth realm Crown government in the course of their duties.
Page 1 of 41
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
ACS Applied Materials & Interfaces
Domain Configuration and Thermal Stability of (K0.48Na0.52)(Nb0.96Sb0.04)O3Bi0.50(Na0.82K0.18)0.50ZrO3 Piezoceramics with High d33 Coefficient Yalin Qin,a, b, c Jialiang Zhang,*, b Weizeng Yao,b Chaojing Lu,a and Shujun Zhang*, c, d a
College of Physics; Key Laboratory of Photonics Materials and Technology in Universities
of Shandong, Qingdao University, Qingdao 266071, Shandong, P. R. China b
School of Physics; State Key Laboratory of Crystal Materials, Shandong University, Jinan
250100, P. R. China c
Materials Research Institute, Pennsylvania State University, Pennsylvania 16801, USA
d
Institute for Superconductor and Electronic Materials; Australia Institute of Innovative
Materials, University of Wollongong, Wollongong, NSW 2500, Australia KEYWORDS: Domain configuration, Thermal stability, R-T phase boundary, Strain, KNNbased, Lead-free piezoelectrics
ACS Paragon Plus Environment
1
ACS Applied Materials & Interfaces
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Page 2 of 41
ABSTRACT
The domain configuration of lead-free (K0.48Na0.52)(Nb0.96Sb0.04)O3-Bi0.50(Na0.82K0.18)0.50ZrO3 ceramics with rhombohedral-tetragonal morphotropic phase boundary, accounting for the high property and good thermal stability, were systematically studied. Short domain segments (before poling), long domain stripes with wedge-shaped or furcated ends (after poling), were found to be typical domain configurations. The reduced elastic energy, lattice distortion and internal stress due to the coexistence of rhombohedral and tetragonal phases, result in much easier domain reorientation and domain wall motion, responsible for the high piezoelectric properties, being on the order of 460 pC/N, in which the extrinsic contribution from irreversible domain switching was estimated to be around 50% of the total piezoelectricity. Minor piezoelectric property variations (